Date Changes by itself in ComboBox

Hi Gurus,
I am opening this thread in continuation to my previous thread:-
Date range in Xcelsius
I could resolve this issue by referencing the cells in the next column in descending order for eg. I had data in ascending order  in M3 to M38 so  what I did was in N3 to N38 i referenced as follows In N3 I referenced M38, in N4 I referenced M37, In N5  M36 is referenced..Like that. And referenced all the combo boxes to N3:N38. And it helped me to get the desired results. However, I am facing a very strange problem.
In the Dashboard comboBox, if we select 08/2010, after 10 seconds it goes back to 7/2008. I have checked all the propertied and did not find anything which could cause this problem.
Anyone has any idea why its happening?
Regards

resolved

Similar Messages

  • RE: Time and Date Changed by itself

    The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

    I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

  • What makes an alias modified date change?

    Anybody knows what can make an alias "modified" date change by itself?

    Any modification of the file changes the Modified Date.

  • Event Data Change step- Failure

    Hi All,
    I have a failure in event data change process in a process chain.
    It has identified 2 packages for change.
    One package has successfully been done.
    While processing of second package, the job BCAST**** failed as logon to BW system with user ID specified failed.
    I know that the user-id does not exist., but am not able to find out of where the to change the user id for the job BCAST*** to run successfull.
    when i click displaying messages, it shows
    Step 001 started (program RSPROCESS, variant &0000001212711, user ID BWEXTRACT)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job
    BIBCAST4AN61630VW21F4LTLVP2QED68 with ID 08254800
    The job BIBCAST4AN61630VW21F4LTLVP2QED68 failed as logon was not possible.
    Please suggest

    Hai ,
    Its right you get the owner name in the table after changing the right user id there .
    In broadcast setting screen itself say for EX broadcast email
    below you give the recepient address
    after that you have the Authorization user  box where you can directly change to right id if you have the proper authorization attached to your user id .Remmember to save then schedule & execute when you trigger for first time.
    This step is related to the role attached to your user access ask basis guy or instead of transporting from development do the broadcast setting directly in production with right EP access.
    hope it would sove your issue.

  • Modification Date changes when updating Open With?!?!

    Forgive me if this is mentioned elsewhere. I have been searching these forums and not seen this problem.
    If I do a 'Get Info' on a file in the Finder and change the application it opens with, the Modification Date changes to 'now'. Why in the world would this happen? This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file. I am simply changing the OS's metadata about which app to use. This info isn't even stored in the file itself, as evidenced by burning such an document to a CD or moving it through a network server then opening it on a machine with different default apps for certain extensions.
    Is this just another wacky step backwards in the world of the Apple OS X Finder, or am I missing a way to avoid this?
    PowerMac G5 2.5DP   Mac OS X (10.4.3)  

    This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file.
    Actually, I am using "Panther" now, and can confirm that changing the application to be used to open an individual file through "Get Info" does in fact change the modification date.
    When the "Change all" button is used, the modification date of other files of that type won't be affected by this change since that modification is presumably made somewhere in the "Launch Services" database to set the "default" application to be used for that file type. Perhaps this is what you were thinking of.
    However, for that first file (or any file changed individually), the file is in fact modified, and the "Open with" information is stored with the file, in its "resource fork". Usually, a 'usro' resource (specifying the application) and an 'icns' resource (for the app's custom icon for that file type) are added. You can try this yourself - drag any image from Safari.app to the "Desktop" and open the info window for that image - such images usually don't have a "resource fork". Make note of the file's size, then change the "Open with" application. You should immediately see an increase in the file's size (to account for the addition of the "resource fork") accompanied by an update of the file's modification date to reflect this modification.

  • Cost Price In Item Master Data Changing

    hi guys...
    the cost price in item master data has been changing by itself in WH2..what could be the possible reasons guys???
    regards

    Hi,
    You must have set your 'Valuation method as ,Moving Average' so the system changes calculates the ost price and changes the value everytime
    regards
    Md.nazeer Shaikh

  • Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    : Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
    The FP-1000/1001 seri
    al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
    Regards,
    Aaron

  • Why did the date change to september 21 when it is realy august 21?!?!

    I tried cropping a picture and suddenly my phone turned off then turned back on by itself. When it turned back on i noticed the date changed to september! Why did this happen? And how can i change back the date?

    This has occured on my iPhone 4 16GB three times this morning.  Once at 8:15a, then at 10:30a, and just now at 12:00p today (all times are Central). 
    Device:  iPhone 4 16GB (MC318LL)
    Carrier:  AT&T
    iOS Version: 5.1.1 (9B206)
    Turning the phone off and on does not fix the problem.  Could be an issue with the date/time info when queried from the carrier. All three times I was on 3G and had a weak signal. Once the date changed, 3G was lost and then went to 2G (EDGE) and then 3G was restored.  I am wondering if it will happen at 2:00p also.

  • Including an Event Data Change in a Process Chain

    There is a step called "_Execution with Data Change in InfoProvider_" in the process of including event data change in a process chain.
    How do we carryout this? should this be done in Bex or in process chain itself?

    Dear Eshwari,
    1) To get the 'Execution on data change' option, you need to have aprocess chain with the 'Event data
    change' process type which contains 'the infoprovider' (The infoprovider, over which the query is created
    which you are trying to broadcast) in the process variant of it.
    2) Further more, additional authorization is also needed in order for the user to see such scheduling options in broadcaster.
    Please assign this authorization object to the affected users.
    BEx Broadcasting Authorization to Schedule  S_RS_BCS
         Activity                       *
         Event ID in Broadcasting Frame *
         Event Type in Broadcasting Fra <== Here you should select*
         ID of a BI Reporting Object in *
         Type of BI Reporting Object in *
    3) Please also ensure the user has not only the Busines Explorer role but also Business Intelligence role in Portal,
    Regards,
    Arvind

  • Can not see the option Execution with Data Change in the infoprovider?

    Hi team,
    i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
    i can not see the option "Execution with Data Change in the infoprovider",
    i can only see 2 options
    Direct scheduling in background process
    create new scheduling
    periodic,
    is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
    kindly assist

    Hi Blusky ,
    check the below given link.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
    Regards,
    Rohit Garg

  • How can I recover from a Botched BATCH DATE CHANGE in iPhoto?

    Botched Batch Date Change iPhoto08
    Short Story: Intending to change the date for one photo I managed to change the dates for all 8,525 images in my iPhoto08 library to the SAME DATE!! I found that the original creation dates were saved in the in the Modified field that appears in the Photo Info Window / File metadata subsection. I would like some help figuring out how to set the Date Created to this File Modified Date that appears in the Photo Info Window.
    GORY DETAILS:
    I used iPhoto08/ Photos menu / BATCH CHANGE... /“Set DATE to 20100723 1:20:54 PM” with “Modify original files” checked. iPhoto changed all 8,525 images to the same date.
    I now realize I should have used Photos menu / Adjust Date and Time ... But the damage was already done. Unfortunately there was no Edit menu / Undo for this operation. ALL 8,525 images have the same date. I checked in the the iPhoto Information sidebar--same date all images.
    Next, as a test, I dragged an image to the desktop and opened it in Graphic Converter7.0.3. The same date “20100723 1:20:54 PM” appeared in the Image Browser List /”Date Created”, “Date Modified”, “Date Captured” metadata fields.
    The following appeared in the Graphic Converter
    Image Preview sidebar (subWindow) going left to right
    Image menu/button
    Date and Time: Friday, July 23, 2010 1:20:54 PM PT
    Exif menu/button
    File date and time: 2010:07:23 13:20:54
    Date and time of original data generation: 2010:07:23 13:20:54
    Unknown tag (36868): 2010:07:23 13:20:54 <- significant?
    ExifTool menu/button
    ExifTool Version Number:8.40
    Warning: [minor] Suspicious MakerNotes offset for tag 0x9001
    ----System----
    File Modification Date/Time: 2010:07:23 13:20:54-07:00
    ----IFDO----
    Modify Date: 2010:07:23 13:20:54
    ----ExifIFD----
    Date/Time Original: 2010:07:23 13:20:54
    Create Date: 2010:07:23 13:20:54
    <<<<<<OH MY GOD >>>>>> the BATCH CHANGE / SET DATE not only RESET the date for EVERY IMAGE in my library, it also changed the date metadata EVERYWHERE inside each individual image file.
    Actually it's my Mom and Dad's iPhoto library containing all the kids and grand kids pictures, family trips, important events, everything. There is no backup. I feel as if I have tipped over a file cabinet containing all our photos. Our “date and event” organized 8,525 image iPhoto library was now as useful as a giant shoebox. On second thought, a shoe box full of real photo prints would be more useful than my iPhoto library because the prints would have the print date stamped on them.
    At this point feeling desperate I closed my eyes and said a quick prayer to Saint Rita - Patron Saint of the Impossible.
    I returned to iPhoto .................and noticed the Show Photo Info MENU item in the Photo Menu.
    I selected it.
    And Low and behold,
    in the Photo Info WINDOW,
    under the Meta data File SUBSECTION, the correct photo creation date appeared -->" Modified: 20071002 05:46:07 PM" I checked different photos ... They all had different FILE MODIFIED dates. These dates were/are the old creation dates! My prayers were answered: THANK YOU SAINT RITA!
    But now I am really stumped! This File Modified Date seems to be some kind of external metadata that is indexed or keyed to each image. How is this metadata stored in the iPhoto library? How can I access this File Modified date? I now turn to you GREAT iPhoto WIZARDS. Pray tell, how can I set the “Creation Date to the file Modified Date” that appears in the Photo Info Window as a (scriptable?) batch process.
    I am on my knees for this one...please help. we have iphoto11 but afraid to upgrade to it. until i know more i don't want to loose this Modified Date metadata.

    thanks for the quick response...
    no simple solution because no backup to restore from
    iPhoto seems to be using file metadata as some sort of index key in the
    Photo Info Window. open up the iphoto library package and take a look at
    the .xml file -- ModDate is used everywhere. hoping to export this data and merge/join it to
    each image.
    still trying to figure it out.
    thanks,
    Tom

  • Open Transactions in ECC for Master Data changes in MDM

    Hi All,
    I have a basic Design question on how to handle the impact of Data changes in MDM for any open transactions with that Master object. For eg if we have a Material set up in MDM and in ECC and there are open Purchase Orders for that Material, now if the Base Unit of Measure is changed in MDM and gets harmonized to ECC(After Workflow approval of the Change) how will it impact the PO attached to the material . Can we do any configuration in ECC that will restrict any Open PO s not to take the new changed value and any new POs taking up the new Base Unit of Measure , or can we set up an alert/notification that will trigger for a PO whenever any Master Data is changed and the PO takes the new changed value on the fly . What will be the best approach from a solution point of view .
    Thanks ,
    Prabuddha

    Hi Prabuddha,
    In ECC if a change happens to a master data not all the changes are reflected automatically in the open documents like open PO or open Sales order. Some fields values have to be redetermined for eg: "pricing procedure", some of them needs to be changed manually for eg: "Description". Moreover specific to your eg of Base unit of measure, this is a sensitive field and has lot of impact on the process so there for changing such fields it is necessary to close all the open documents against the Master data record in consideration. This fact is regardless whether the change happens through an IDoc or directly by MM02/XK02/XD02
    Prabudha, Please revert if you have further questions.
    Best Regards
    P T Manoj
    Edited by: PT MANOJ on Sep 2, 2011 10:25 PM

  • Address data changed after invoice is created

    Hi,
    I've a problem to solve and it's related with data changed after invoice is created.
    The scenario is the follow:
    1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
    2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
    3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
    I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
    And, I can't edit this kind of data on invoice creation because it must be done at order level.
    So I don't understand why it happen, but it happen on more than one client.
    I'll hope that anyone can help me to solve this issue.
    Kind regards,
    Nuno Rodrigues

    Hi Nuno,
    the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
    If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
    If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
    Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
    But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
    Hans

  • No Data Change event generated for a XControl in a Type Def.

    Hello,
    Maybe I am missing something but the Data Change event of a XControl is not called when the XControl is used in a Type Def. or Strictly Type Def. (see the attached file).
    There may be some logics behind it but it eludes me. Any idea of why or any idea of a workaround still keeping the Type Def. ?
    Best Regards.
    Julian
    Windows XP SP2 & Windows Vista 64 - LV 8.5 & LV 8.5.1
    Attachments:
    XControl No Data Change event.zip ‏45 KB

    Hi TWGomez,
    Thank you for addressing this issue. It must be a XControl because it carries many implemented functions/methods (though there is none in the provided example).
    Also consider that the provided non-working example is in fact a reduction of my actual problem (in a 1000-VI large application) to the smallest relevant elements. In fact I use a  typedef of a mix of a lot of different XControls and normal controls, some of them being typedef, strictly typedef or normal controls and other XControls of XControls (of XControls...) in a object oriented like approach...
    Hi Prashant,
    I use a typedef to propagate its modifications automatically everywhere it is used in the application (a lot of places). As you imply a XControl would do the same, though one would like to construct a simple typedef when no additional functionality is wanted.
    The remark "XControl=typedef+block diagram" is actually very neat (never thought of it that way) because it provides a workaround by transforming every typedef into a XControl. Thanks very much, I will explore this solution.
    One issue remains: All normal controls update their displayed value when inserted into a typedef but not XControls. Data change event is not triggered. I known that XControls have some limitations (no array of XControls) but I would say, like TWGomez, that this is a “bug” considering the expected functionality.

  • How to schedule the webi report based on data changes in the report data

    Hello,
    I want  to schedule a webi report based on data change in a column in the report.
    The scenario is something like below:
    1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
    I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
    Anybody done this before.
    Thanks
    Gaurav

    Hi,
    May be these links can help you:
    http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
    SEM-BCS: Load from data stream schedule
    Attribute Change Run

Maybe you are looking for