Date criteria with Equals

hi
i have SCSM 2012 where in i created a custom form to enter all our Asset details.
This contains Warranty Expiry date column wherein our IT admins will enter the expiry date of product once we purchase it.
Now wish to add a notification for our team to remind them 1 month before the warranty expiry date.
If i got to subscription and add notification and select periodically notify and try to add the date criteria relative for warranty expiry date, there is no option as EQUALs to.
Only greater than or equal to (or) Less than or equal to options are available to select. If i select any of this, it throws more mails as many matches the criteria because of greater or less than.
I just need EQUALs so that the date exactly matches the warranty date and send a notificaiton.
how to do this or is there any better logic to do this?
regards Sundaresan.C

This behavior is by design. the notification rules are not run instantaneously, so equals would have something like a 1 in 30 chance of hitting your exact time if it was checked them every cycle. Make you're window slightly smaller then the period. i.e.
if it's nightly, then you want to look for any date greater then 12 hours before and less then 12 hours after. 

Similar Messages

  • Date Filtering With Equals and Time in Interactive Reports

    Using Apex 4.2.0.00.27
    I have a date column in an Interactive Report. The default column and action menu filters include things like "in the last 2 hours". If I remove the time component of the date this fails to find any records.
    If I leave the time component in the date then the user also has the option (via action->filter menu) to select a filter for "equals" and then this fails to find any records.
    I would like to keep the time component but also allow the filter for "equals a specific date".
    Greg

    adamt wrote:
    Thank you very much fac586!
    It's probably obvious I'm not very familiar with APEX (not HTML/CSS!) but managed to figure out a place to put what you said...If you are unfamiliar with the web technologies used in APEX, spend some time on the tutorials here: start with HTML, then XHTML, CSS, Javascript and the HTML DOM, and now HTML5.
    I appended the following in the template definition section for "Region without Buttons and Titles" and the Interactive Report looks how the users want now! I should probably take a copy of that template and only use it for the relevant IRs so that nothing else gets messed up.There are 3 ways to include CSS in web pages. The easiest is using an internal style sheet as you've done, but where you've put it is <a href="https://forums.oracle.com/forums/thread.jspa?messageID=10178616&#10178616">invalid according to the HTML specification</a>. The page HTML Header property in the APEX Page Attributes is the appropriate place for such style sheets. However ff you want to apply these styles globally across your application then that's not a scalable approach as it involves modifying every page with an IR. The standards-compliant approach is to modify the required page templates, either to include an external style sheet containing these overrides, or (more ambitiously and efficiently) copying and modifying the theme files in a different location and changing the page templates to reference them.
    <style type="text/css">
    .apexir_WORKSHEET_DATA th div {
    margin-left: 0;
    .apexir_WORKSHEET_DATA th,
    .apexir_WORKSHEET_DATA td {
    border: 1px solid #CCCCCC;
    </style>Always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.

  • SegregatingTable data into different bucket with equal numebr of

    Hi Guys,
    I wanted to process table data in chunks not all the rows at a time. How can we achieve this in oracle.
    Example :
    I have one table EMP which has ten thousands rows(10,000) rows. Now these ten thousands rows are joined with other tables to process data and it takes time. So I wanted to pass one thousands rows at a time as an input to the procedures so that processing should happen only with 1 thousands rows at a time. This table does not have any primary key. So it there any method in oracle using that I can segregating the tables data into different buckets with equal number of rows.
    I have used DBMS_PARALLEL_EXECUTE but its taking lots of time. Any help will be appreciated.

    I have one table EMP which has ten thousands rows(10,000) rows. Now these ten thousands rows are joined with other tables to process data and it takes time.
    OK... So this is your actual problem. And the solution you are trying to come up with does not sound promising. So lets take a step back and re-think our strategy here. First thing would be how about we see some code? Show us your code that you say is running slow. And we can take it from there. The number 10,000 is a very small number. And if that is causing performance issue then you are in some big trouble.
    And also it wouldn't hurt if you could read this Re: 3. How to  improve the performance of my query? / My query is running slow.

  • Smart Playlists with Date Criteria

    It seems any smart playlist with a date criteria (ie: Date Added) will not show up on any device that access the iTunes Match Service. I have several smart playlists with a date criteria and they show up blank on my iphone and ipad. Yet, if I delete the date criteria, the playlist populates on the device. I tried creating a smart playlist with just the date criteria and then in a new smart playlist referencing the date criteria smart playlist and the new playlist will not upload to icloud because an icloud smart playlist can not reference another smart playlist

    So I went through technical support because I had this exactly some problem.  Smart playlist shows up in iTunes on my iMAC, as well as via Apple TV (both via iCloud and Home Sharing options.)  It also fully populates those smart playlists.
    For my pre-existing Smart Playlists (that only have criteria for the GROUPING field) show up, have songs, but are quite a few songs short.  I then created a brand new play list with brand new tracks... and its empty on iPhone 4S and iPAD2.  Apple TV and IMAC are fine.
    So technical support provided me with this response:  For smart playlists to work on iOS devices, the songs must be downloaded to the device. 
    My feedback was this: So this is chicken and the egg.  You create the playlist to easily locate and download those songs to your device, but you cant because they have to be on your device before they will show in the playlist. 
    I suppose the only work around is to create the smart playlist w/ your filters.  THEN create a regular playlist and copy everything in the SMART Playlist into the regular playlist. 
    I have not used Apple products for very long... approaching 2 years.  I moved everything to Apple.  Computers, laptops, portable devices, etc... I have been VERY impressed.  HOWEVER, this makes the point of Smart Playlists completely manual when it comes to your iOS device. 
    I will for sure be launching a compliant to www.apple.com/feedback. 

  • Criteria with out Operator in af:Query

    Hi,
    We are using af:query in our application and our application uses POJO based data controls. It does not implement BC4J. Is it possible to display a critieria in af:query WITH OUT a criteria operator? For example we want City as on the criteria and we would not want display any criteria operator. The assumption is it should always be searched with Equals. If it is possible can some one let me know how to achieve this?
    Thanks,
    Rama
    Edited by: user9954330 on Apr 24, 2012 10:59 PM

    Hi,
    Is it possible display a field in Search Panel as input LOV with custom popup ?
    Yes. You assign a LOV definition to the attribute that then you display in the af:query component. You can also have dependnet LOV implemented this way. However, you cannot have a custom (your own) list of value popup dialog used
    See page 8 and following in http://www.oracle.com/technetwork/developer-tools/adf/learnmore/jan2011-otn-harvest-300940.pdf
    Frank
    Edited by: Frank Nimphius on Jun 29, 2011 11:36 AM

  • Search Criteria With in block in Essbase.

    Hello everyone.
    could anyone tell me which searching technique is use with in a block in a essbase to search data cell or entire procedure to search a data cell with in a block in essbase ?

    Yes, in this context, searching cells within a block is like searching fields within a relational record... It's not an index/search issue at all -- it's a criteria selection issue.
    Although, it would be a great question to ask if you suspect somebody is book smart and doesn't have any real essbase experience... ;p

  • Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

    Hi All,
    We have created a manual planned order for one buy item in ASCP workbench for some qty and released it.
    But, we are not able to get its requisition created in source.
    When we check the PO_Interface _Errors table, we found that it is errored out with error as --
    Need By Date Should be equal or after the effective start date .
    Can anyone please help me out to find the cause of this issue. Any help/pointer in this regard will be highly appreciated.
    Thanks,
    Avinash

    Hi Abhishek,
    We found the root cause of the issue.
    Its BPA was not having any Effective start date mentioned in its terms. So we put it as BPA creation date and ran the data collection and plan run.
    After that we were able to see its BPA release created without any error.
    Thanks,
    Avinash

  • Error "Overlapping selection criteria with DTP" when transporting DTP

    When transporting a DTP from Dev to QA I get the following error in the trasnport log:
    Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
    Message no. RSBK019
    Diagnosis
    The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
    System Response
    You cannot activate the DTP with the current selection criteria.
    Procedure
    Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
    The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
    Any suggestions? or similar experiences?
    Thanks in advance
    nicolá

    Hello,
    You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
    To change the parameter do like this:
    Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
    Do this in Dev, QA and Prod.
    Regards,
    Jorge Diogo

  • Problem with central build of Simple Date Type with Enumeration

    Dear gurus,
    I hope I'm posting this in the correct forum. Please advise if I'm in the wrong forum.
    I have a Web Dynpro DC in which I've created a simple data type with enumeration.  It is used for binding to a radio box. The data type is called DownloadType; the enumeration contains two vales: current and archive. To allow me to access the enumeration values, I turn on the "Generate a class representation of the enumeration" in the data type builder.
    I then reference the enumeration values with code like:
    if (downloadType.equals (DownloadType._CURRENT))
        yada yada yada
    This works fine when building locally and deploying directly. But when the DC is built by CBS (or doing a "Development Component->Build..." in NW Dev Studio), the build fails, stating that the DownloadType._CURRENT symbol cannot be resolved.
    For example:
    C:yadayadayada.java:227: cannot resolve symbol
    symbol  : variable _CURRENT
    location: class yadayadayada.DownloadType
                    equals(DownloadType._CURRENT))  {
    Apparently the central builder is not smart enough to handle the "Generate a class representation" flag.
    Is this a known problem? Are there any workarounds?
    Thanks in advance for any help you can provide.
    -Kelly
    P.S. Environment: 2004s

    Hi Kelly,
    works for me using SP10, what SP are you on?
    There's a line in the DC log that says:
         [ddgen] [Info]    Generating datatypes/com/x/x/x/MyEnum.java
    and the java compiler includes the matching path for compilation:
          [echo]   source paths:
          [echo]     ...\_comp\src\packages
          [echo]     ..\t\ABF37B5AFB3B2E8A76FFD29E7862EA48\gen_ddic\datatypes
    Regards,
    Marc

  • Generic Data Source with Function Module data mismatch

    Hi All,
    I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
    when I run the InfoPackage  in BI im Getting more no. of records than what i got executing the function module..
    and single record is divided into 2 records in BI side(not all the records), how can it be possible???
    is there anything Im missing to explain you my issue???
    if understood please help me out.
    Thanks n Regards,
    ravi.

    HI rkiranbi,
    1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
    Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
    in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
    selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means  you need to
    check coding logic in function module. 
    2. if your  are getting wrong values in BI System then check with
                  1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
                  if you find any mistake you need change the coding in function module according to client requirement.
                  2. compare data with RSA3 and bi report data or data target data.
                                 check it properly above steps, you will get solution.
    thanks and regards,
    malli

  • Selection Criteria With Plant , And Reading File

    Guys,
    I have a selection criteria with fields SAP Plant, and a filepath to read a file. File will be containing fields like legacy plant,material, date,description etc as records. Upon user executes after giving the SAP Plants (which has low and high limit ie select-option) and filepath.
    The program should first convert the SAP Plants to Legacy Plants and Read only those file contents where the legacy plant in file matches the converted legacy plants and other non matching plant file records ignored. Please suggest and gimme a sample code.
    Shawn

    Hi Shawn,
    Naimesh i think this would help shawn, i have given u a sample code who to work around in a easy way.Guys comment on the program if u feel something i miss
    Report Z_File_Example.
    Type:Begin of ty_tab1
               zlegacy_plant type zplant-zlegacy_plant
            End of ty_tab1.
    Type : Begin of ty_tab2
    include fields similar to input file     
                   legacy_plant(4) type c ,
                   no type mara-matnr,
                   descripion type mara-mkty,
              End of ty_tab2.
    Data : out_tab1 type standard table of ty_tab1,
              wa1 type ty_tab1.
    Data : out_tab2 type standard table of ty_tab2,
              wa2 type ty_tab2.
    Select-options : s_plant like mara-werks.
    AT SELECTION-SCREEN ON END OF S_PLANT.
       LOOP AT S_PLANT.
    Select query  takes both the lower limit and high in where condition to select 
    legacy plant from the table and populate the Work area and later to internal table.
    Conversion of SAP Plant to  Legacy Plant
          Select ZLegacy_Plant
              into corresponding fields of wa1
          from Zplant where werks in S_plant
         append wa1 to out_tab1
    ENDLOOP.
    ***After reading a file using ws_upload , which gives an output in say out_tab2(internal table)
    Call WS_UPLOAD
    ****We can iterate through the out_tab2 (shown below)
    loop at out_tab2 into wa2 where legacy_plant in wa1-zlegacy_plant
       Process those records as u want
    end loop.
    Thanks

  • Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

    I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
    The meta data for each image is missing.
    I have over 2,000 images. I don't want to go back through each image and add meta data.
    Is there some way to move everything?

    No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
    Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

  • How can we view the data asociated with Request ID

    Hi All,
    I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
    Please help me out.
    Thanks & Regards
    Amit Kumar

    Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
    Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
    Hope this helps.
    Veerendra.
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

  • Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

    Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

    I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

  • I am trying to download the new episode of Game of Thrones on my iPad. We are currently travelling in Italy and have an unlimited pre- paid data plan with the Italian carrier Wind.  When I try download the episode through iTunes I get an error message

    Hi there, traveling through Italy with my iPad. Purchased a unlimited prepaid data plan with Italian carrier WIND.  Has been working excellent, but when I try to download a new episode of Game of Thrones, I get an error message which says that I have to connect to a wi fi network or download the episode on my MacBook.  Why can't I download using the microsim and prepaid data plan?  Any help will be great thank you!

    Unfortunately downloads larger than 20mbps require wifi due to most carriers having data limits. This "requirement" keeps people who are not familiar with data and what takes up a lot of data from going over.

Maybe you are looking for