Date difference between Requsition apporval and Po approval in Oracle apps

My requirement is that l need to get the number of date difference between requisition apporval date(requisition) and po approval date (purchase) excluding holidays how to do it ?
Thanks in advance..

One PO could be generated from multiple requisitions. In that case, which requisition would you like to consider?
One requisition could be converted into multiple POs. In that case, which PO would you like to consider?
Assuming, there is a one-to-one relationship between your POs and requisitions:
Link a PO to the corresponding requisition by joining po_distributions_all.req_distribution_id with po_req_distributions_all.requisition_id
Once you have found the 2 records, get the approved_date from po_headers_all and po_requisition_headers_all
Then go to bom_calendar_dates for those dates and find the difference between seq_num. That is what you are looking for.
Sandeep Gandhi

Similar Messages

What's the difference between Application ID and Product ID for WP App?

Anyone know what's the difference between the Application ID on Marketplace and the
Product ID in WMAppManifest.xml? Can I get the Application ID before I sumbit the app to Marketplace? Thank you.

Hello the ApplicationID is the ProductID on the WMAppManifest.xml, when you create a new project, a generic
ProductID is assigned to your app, and once you send your app to the store, the generic
ProductID is replaced with a new one (which will be assigned permanently to your app
unless you do a new App Submission, which means each update will have that same ID). AFAIK once your app is certified you'll get the ApplicationID, you can send it and publish it manually, so you could
have the AppID before people start downloading the app.
(if you need the AppID for testing IAP, you may want to try sending your App as a Beta version)
I hope it helps
Yassine,
Now I think I understand them, thank you!

Difference between personal edition and enterprise edition of oracle 8i...

can any one tell me difference between oracle 8i enterprise edition and oracle 8i personal edition...

shailesh wrote:
dear satish,i m not overreacting in this,i have joined this group to grab some knowledge,so nobody have to comment me on my recent posts that are answered or not answered.my organization using oracle 8i so i have to keep with this.i got this error so i asked here...What error? Perhaps if you asked about a specific error instead of a vague question about the differences between two obsolete editions of Oracle, you would have received a response more to your liking.

Difference between Enterprise Edition and Standard Edition for Oracle RAC

Hi,
In our current setup we have RAC on standard edition and client is now planning to go for Enterprise Edition but not yet decide because of cost.
Is there any difference between Grid Infrastructure 11gR3 Enterprise edition and Standard Edition ?
They told me to first install Enterprise Edition and then will move to Standard Edition if they can't get the EE license so in that case do i have to re-install Grid infrastructure for standard edition?
Regards,
Chirag

994551 wrote:
Hi,
In our current setup we have RAC on standard edition and client is now planning to go for Enterprise Edition but not yet decide because of cost.
Is there any difference between Grid Infrastructure 11gR3 Enterprise edition and Standard Edition ?
They told me to first install Enterprise Edition and then will move to Standard Edition if they can't get the EE license so in that case do i have to re-install Grid infrastructure for standard edition?Hi,
There is no "Grid Infrastructure 11gR3 Enterprise edition and Standard Edition", is only Grid Infrastructure 11gR2.
About Oracle Clusterware (Grid Infrastructure) licensing.
At least one of the servers in the cluster is licensed for Oracle Database (SE1, SE, or EE)
A cluster is defined to include all the machines that share the same Oracle Cluster Registry (OCR) and Voting Disk.
http://docs.oracle.com/cd/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ
About Database licensing.
http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html
Note : Oracle Real Application Clusters (Oracle RAC), is an option to Oracle Database 11g Enterprise Edition and included with Oracle Database 11g Standard Edition (on clusters with a maximum of 4 sockets).
If you move to Oracle EE you must purchase a separate licence to use RAC option
About Installation:
Nothing changes on your current setup of Grid Infrastructure 11.2
Just install a new fresh installation of Oracle Database (On current clusterware) chosing E.E during Install. Configure the database/services to start from this new ORACLE HOME. Nothing change on Database all previous backup and features used still unchanged. Using this new Oracle Home new features are enabled to be used by your databases.
About Downgrade:
Step by Step Procedure to Convert from Enterprise Edition to Standard Edition [ID 465189.1]

Data difference between PSA/Query and InfoCube

Hi All!
I have a problem during the data extraction from R/3 to a basic Cube. When the currency is different from EUR, the key figure 0CS_YTD_TC data its different from the others (0CS_YTD_GC and 0CS_YTD_LC). In the cube content the value is correct but in the PSA and in queries is not.
What can I do?

Ricardo,
Do you mean that one of your KF value (for example, in the cube) differs from the value shown in a query 10 times?
If so, look at the table TCURX. In my system PTE has 0 decimals. It means that cube/query will differ 100 times.
Look here at the problem description:
Re: Local Currency COP, KRW values wrong in report
and here for workaround on a query level:
Re: is conditional calculation in the report possible?
Best regards,
Eugene

Differences between iPad 1 and 2 (in terms of apps)?

I know there's the few obvious differences:
-Lighter/thinner
-Cameras
-Smart cover
-Better specs (CPU/GPU/RAM)
-Gesture controls with iOS 5
But I don't particularly care for any of that since I wouldn't intend on gaming on it, I simply don't have use for the cameras, and I never really liked gesture controls.
Anyway, can anybody tell me some apps exclusive to the iPad 2 that aren't camera-related or games? I asked the same question on another forum, and kept getting mention of there being a lot of apps incompatible with the original iPad.

Actually, the requiresSelection was renamed to requireSelection:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import spark.events.IndexChangeEvent;
            protected function ddl_changeHandler(evt:IndexChangeEvent):void {
                Alert.show("oldIndex:" + evt.oldIndex + ", newIndex:" + evt.newIndex, evt.type);
            protected function ddl_changingHandler(evt:IndexChangeEvent):void {
                Alert.show("oldIndex:" + evt.oldIndex + ", newIndex:" + evt.newIndex, evt.type);
        ]]>
    </fx:Script>
    <s:DropDownList id="ddl"
                    requireSelection="true"
                    change="ddl_changeHandler(event);"
                    changing="ddl_changingHandler(event)">
        <s:dataProvider>
            <s:ArrayList source="[One,Two,Three,Four,Five,Six,Seven,Eight,Nine,Ten]" />
        </s:dataProvider>
    </s:DropDownList>
</s:Application>
Peter

Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....

Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support

WHAT IS DIFFERENCE BETWEEN DEVELOPER 2000 AND SQL DEVELOPER?

Hello Everyone.I am new to oracle and want to know the difference between developer 2000 and sql developer in oracle.Pls?

Developer 2000 is an application for making webforms that will be served on an Application Server, and accessed by the end users through an applet in their webbrowser.
SQL Developer is a tool for administrating and manipulating data and structure of your database. Like a GUI version of SQL*Plus, not advisable for end users.
Regards,
K.

Differences between ANSI SQL and Oracle 8/9

Hallo,
i'm looking for good online texts or books concerning the problem "Differences between ANSI SQL and different database implementations (ORACLE, Informix, MySQL...)" I want to check a program written in C (with ESQL) that works with an Informix-DB. In this code i want to find code that is specific to the Informix-DB. I want to change the database, so all the code should be independent from a DB. Does anybody know texts or books concerning this problem?
thx
Marco Seum

Basically there is syntax difference between both of them.
Lets say i want to join two table EMP and DEPT based on DEPTNO.
With Oracle SQL format its like this.
select e.*
from emp e, dept d
where e.deptno = d.deptnoHere the joining condition goes in the WHERE clause.
With ANSI SQL format its like this.
select e.*
from emp e
join dept d
on e.deptno = d.deptnoHere the join condition is mentioned separately and not in WHERE clause.
Oracle supports ANSI SQL starting from 9i version.
You can read more about the syntax difference Here

EPM9.3.1: Difference between service pack and service fix

Hi,
Tell me pls, what is a difference between service pack and service fix of Oracle EPM products for 9.3.1 release?
Is it an installation process difference&

Hi,
Usually a service pack is a consolidation of service fixes / patches.
Cheers
John
http://john-goodwin.blogspot.com/

Join between SO and AR tables in Oracle Apps 11.0.3

Hello,
I am new to Order Management. Can anyone please suggest join between SO Tables and Receivables tables in Oracle Apps version 11.0.3.
I am working on an Invoicing error during Autoinvoice Import Program and I am doing workaround on this issue. This error comes for specific SO only. The error causes all invoices for a org not be imported into AR. To find out a solution for the same we run Autoinvoice into batches by Sales Order using a process of elimination to determine the offending So transaction. From these offending SO then we determine the customer for these SO's. And then find out if there are any other accounts that have relationships with the offending customer and then turn off that relationship. Then rerun Autoinvoice for that SO. Most of the time SO will be imported successfully. Can anyone please suggest what must be the issue in Autoinvoice Program as I am new this.
Thank You.
Regards,
Meghana

Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios

Difference between sy-datum and any given date

Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
Parag

DATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
    date1                 = '20071122'
    time1                 = '000001'
    date2                 = '20070905'
    time2                 = '000001'
IMPORTING
   DATEDIFF               = DATEDIFF
EXCEPTIONS
   INVALID_DATETIME       = 1
   OTHERS                 = 2.
Greetings,
Blag.

The difference between FIELD-SYMBOL and normal DATA TYPE

Dear experts,
Please see the example below, both are output the same result.
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N,
      ENTRY TYPE STRING.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
WRITE ENTRY.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
--OR It can be written as--
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N.
FIELD-SYMBOLS <ENTRY>.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
WRITE <ENTRY>.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
Is there any special circumstances we need to use FIELD-SYMBOL?
Why is FIELD-SYMBOL is introduce in the first place?
Kindly advice with example.
Thanks in advance for those who can help me on this.

HI,
You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
Example
form insert_row
using p_tc_name.
field-symbols <tc> type cxtab_control. "Table control
assign (p_tc_name) to <tc>.
insert 100 lines in table control
<tc>-lines = 100.
Field symbols allow you to:
**     Assign an alias to a data object(for example, a shortened
        name for data objects structured through several hierarchies
        - <fs>-f instead of rec1-rec2-rec3-f)
**     Set the offset and length for a string variably at runtime
**     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
**     Adopt or change the type of a field dynamically at runtime
**     Access components of a structure
**     (from Release 4.5A) Point to lines of an internal table
        (process internal tables without a separate work area)
Field symbols in ABAP are similar to pointers in other programming
languages. However, pointers (as used in PASCAL or C) differ from ABAP
field symbols in their reference syntax.
The statement ASSIGN f to <fs> assigns the field f to field
symbol <fs>. The field symbol <fs> then "points" to the
contents of field f at runtime. This means that all changes to the
contents of f are visible in <fs> and vice versa. You declare
the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
Reference syntax
Programming languages such as PASCAL and C use a dereferencing symbol
to indicate the difference between a reference and the object to which
it refers; so PASCAL would use p^ for a pointer instead of p, C would
use *p instead of p. ABAP does not have any such dereferencing symbol.
**     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
you force p1 to point to the object to which p2 refers (reference semantics).
**     In ABAP, if you assign a field symbol <fs1> to a field
symbol <fs2>, <fs1> takes the value of the data object to
which <fs2> refers (value semantics).
**     Field symbols in ABAP are always dereferenced, that is,
they always access the referenced data object. If you want to
change the reference yourself in ABAP, you can use the ASSIGN statement
to assign field symbol <fs1> to field symbol <fs2>.
Using field symbols
You declare field symbols using the FIELD-SYMBOLS statement.
They may be declared either with or without a specific type.
At runtime you assign a field to the field symbol using the ASSIGN
statement. All of the operations on the field symbol act on the field
assigned to it.
When you assign a field to an untyped field symbol, the field symbol
adopts the type of the field. If, on the other hand, you want to assign
a field to a typed field symbol, the type of the field and that of the
field symbol must be compatible.
A field symbol can point to any data object and from Release 4.5A,
they can also point to lines of internal tables.
The brackets (<>) are part of the syntax.
Use the expression <fs> IS ASSIGNED to find out whether the field
symbol <fs> is assigned to a field.
The statement UNASSIGN <fs> sets the field symbol <fs> so
that it points to nothing. The logical expression <fs>
IS ASSIGNED is then false. The corresponding negative expression
is IF NOT <fs> IS ASSIGNED.
An unassigned field symbol <fs> behaves as a constant with
type C(1) and initial value SPACE.
MOVE <fs>
TO dest     Transfers the initial value SPACE to the variable dest
MOVE 'A' to <fs>
Not possible, since <fs> is a constant
(runtime error).
To lift a type restriction, use the CASTING addition in the
ASSIGN statement. The data object is then interpreted as though
it had the data type of the field symbol. You can also do this
with untyped field symbols using the CASTING TYPE <type> addition.
The danger with pointers is that they may point to invalid areas.
This danger is not so acute in ABAP, because the language does not
use address arithmetic (for example, in other languages, pointer p
might point to address 1024. After the statement p = p + 10, it would
point to the address 1034). However, the danger does still exist, and
memory protection violations lead to runtime errors.
A pointer in ABAP may not point beyond a segment boundary. ABAP does
not have one large address space, but rather a set of segments.
Each of the following has its own segment:
*     All global data
*     All local data
*     Each table work area (TABLES)
*     Each COMMON PART
You should only let field symbols move within an elementary field or
structure where ABAP allows you to assign both within the global data
and beyond a field boundary.
Rgds
Umakanth

Can anybody explain me difference between test cases and test data

Hi All,
Can anybody explain me difference between test cases and test data.
Testing procedure for FS.
Thanks & Regards,
Smitha

Hi,
Test case is a procedure how to do the testing of particular functionality and it consists the data that to be given for testing a particular requirement of the given Functional Spec and it also consists the result whether the desired functionality is fullfilling or not.
Regards
Pratap

Difference between Manual Standby and Data Guard Broker..

hi,
could any let me know any usefull docs which help to understand the difference between manual dr and data guard broker?
thanks,

>
could any let me know any usefull docs which help to understand the difference between manual dr and data guard broker?
>
Without Data Guard Broker:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17022/toc.htm
With Data Guard Broker:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17023/toc.htm
See especially why you want to use the broker:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17023/concepts.htm#i1013106
In short: You should have a good reason if you do not use the broker, because it is the officially recommended way to maintain Data Guard. It is even required for some features like Fast-Start Failover.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Date difference between Requsition apporval and Po approval in Oracle apps

Similar Messages

Maybe you are looking for