Date input seems to be going to US format when it should be uk

I am access a site that requires a date input, under chrome and IE the input is fine under safari it is invalid and appears to be in US format, is there a way of changing this

I requested that your post be moved to the iTunes form since you have an iTunes problem, not an iPod touch forum

Similar Messages

Xfce seems to wake up an USB drive, when it should stay asleep

Hi,
I already tried to get help by the mailing list, but the mailing list is bad moderated. Even when providing something that would solve an issue for others, it often is needed to reply off-list.
A brand new WD Elemets does spin up and down again and again, it's neither the drive's nor the kernel's fault. When not running a Xfce session the device spins down after 30 minutes and keeps sleeping.
"noatime" or "relatime" can't be disabled by fstab, since the partitions aren't mounted by it and the drive anyway spins up and down again and again, when no partition is mounted.
[rocketmouse@archlinux src]$ idle3ctl -V
idle3ctl v0.9.1
[rocketmouse@archlinux src]$ sudo smartctl -i /dev/sdc
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.7.10-1-ARCH] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EZRX-00DC0B0
Serial Number: WD-WMC300753067
LU WWN Device Id: 5 0014ee 65863b194
Firmware Version: 80.00A80
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Sat Mar 16 12:00:15 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
[rocketmouse@archlinux src]$ sudo smartctl /dev/sdc -a | grep '^193'
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1747
[rocketmouse@archlinux src]$ sudo idle3ctl --force -v -d /dev/sdc
Checking if Drive is a Western Digital Drive
outgoing cdb: 85 08 2e 00 00 00 00 00 00 00 00 00 00 40 ec 00
data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SG_IO: ATA_16 status=0x0, host_status=0x7, driver_status=0x8
SG_IO: bad response (not CHECK_CONDITION)
Trying legacy HDIO_DRIVE_CMD
HDIO_DRIVE_CMD(identify) failed: Invalid argument
I need to find out, how to disable the "bug" that does wake up the drive without reason.
arch-general-owner wrote:
Subject: Request to mailing list arch-general rejected
Date: Fri, 15 Mar 2013 05:42:52 -0400
Your request to the arch-general mailing list
Posting of your message titled "Re: [arch-general] Western Digital
external drives"
has been rejected by the list moderator. The moderator gave the
following reason for rejecting your request:
"Enough speculation for this week: messages where you make many
different hypothesis without actually testing any are of no use to
this list. Please wait until you have have actual facts to report or
contribute before posting next time. Cheers. --[snip]"
I wonder how I should test something, if I don't know what to test? That's why I ask for help.
Another solution might be, to know how to open and close the case, without damaging anything. Has somebody ever opened and closed the case of a WD Elements?
Regards,
Ralf

There are many SSD related tips in the latest release of Computer Power User magazine. Look in the October 2010 issue starting on page 31.
Secure erase the SSD before first use using a tool like HDD Erase.
Apply all firmware updates before you load the operating system. Recheck for new updates.
Set the sata controller to ACHI.
Do not use a pre_VISTA system to partition the SSD.
Overprovision the SSD by leaving 10 GB available for recovery from dirty states.
Stay current with sata controller updates being released by the manufacturer.
Check to see if trim is active. Open a command prompt and enter: fsutil behavior query DisableDeleteNotify --> 0 is OK
Don't use drive indexing on the SSD.
The above tips may not solve your problem but eliminating them as possibities may help in narrowing down possibilities.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Wrong date format when creating a universe based on a MS Analysis cube

Hi,
When creating a universe based on a MS Analysis 2008 cube the date objects from the cube are created in the universe with CHAR format when it should be DATE format
I have tried to resolve the issue by modifying the date object in the universe with MDX but with little success.
I wonder if it is an error in the cube and that it actually should be possible to get the correct date format from the cube when creating the universe automatically in the universe design tool.
The date object is organised in a hierarchy.
Any ideas? - both to resolve the issue by using MDX in the universe object properties or in the cube.
The universe design tool is version 4.0 SP2 patch 5
/Kim

Oh I knew I was missing something. Ok version 2.
I think in general this approach would work. I assumed you are starting from 1 and resetting to 1.
There should be error handling and so forth that is not here. Probably some details need to be tweaked.
So the key thing here AFAIK is to put the sequence reset in an autonomous procedure. Exactly how to do that may need to be modified.
PS this version has a bug. After the reset needs to change the increment of the sequence back to 1.
and I left that out. oops!
/* testtrigger */
/* previously:
create table mytable (
myprimary_key number(10) primary key,
column1 number(2)
create sequence mysequence
start with 1
increment by 1
maxvalue 99
nocache;
create table mylastdate (lastdate date);
insert into mylastdate(lastdate) values (trunc(sysdate));
create or replace procedure reset_mysequence (in_correction number) is
pragma autonomous_transaction;
begin
execute immediate 'alter sequence mysequence INCREMENT BY ' || in_correction || ' MINVALUE 1';
update mylastdate set lastdate = trunc(sysdate);
commit;
end;
show errors;
create or replace trigger mytrigger
before insert on mytable for each row
declare
tmpdate number(8) := null;
lastdate_used number(8) := null;
correction number := null;
lastseq number(2) := null;
begin
if INSERTING then
tmpdate := to_number(to_char(sysdate,'YYYYMMDD'));
select to_number(to_char(lastdate,'YYYYMMDD')) into lastdate_used
from mylastdate;
select mysequence.currval into lastseq from dual;
/* when this displays in the forum it shows lt gt as nothing on the screen
so this should be lastdate not equal to tmpdate */
if lastdate_used <> tmpdate and lastseq > 1 then
correction := -(lastseq - 1);
reset_mysequence(correction);
end if;
:new.myprimary_key := (tmpdate * 100) + mysequence.nextval;
end if;
end;
show errors;
Edited by: lake on Nov 30, 2010 10:39 AM
Edited by: lake on Nov 30, 2010 10:52 AM

I'm having problems with the install of iTunes 10.7 it seems to be going well and then at the very end of the blue bar it doesnt seem to complete? All of my software is up to date and plenty of space on the mini?

I'm having problems installing iTunes 10.7. It seems to be going well and then at the last part of the blue bar it just doesn't complete. All software is up to date and there is plen of room on the mini? I have tried like 4 times and am ready to throw it out the window.

I noticed some problems with the Apple Support sites here the last day or so.
Try again using > Apple - iTunes - Download iTunes Now

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Kernel data input error on start up SSD Drive

Hi All
I have a HP Pavilion g6-1c58dx Notebook PC which I purchased while on holiday in the US in Jan 2012. This January I upgraded to an 120GB SSD drive from OCZ and Windows 8. From the first day I was receiving an error on start up, the computer would restart and ask me to investigate a "Kernel Data Input Error". I scanned the drive on several occasions and received the all clear. In March the drive just failed completely losing all my data.
OCZ have replaced the drive with one of their Agility range, once again I am receiving the same start up error and although I have checked I have the latest version of all my drivers etc it persists. I am of course worried that in a few weeks this drive will also fail.
It seems unlikely that the same error could occur on two different drives, my query is whether there is a known issue with this notebook and SSD drives and whether there is a solution to the problem.
Thank You
Gareth

I understand that you are receiving a Kernel Data Input Error.
Is this a blue screen error? If so, does it give any more details through a more details option? Some Windows 8 blue screen errors provide less information upfront with a more information option.
If it is a blue screen error, uploading the file and sharing the link may be helpful in identifying the core of the issue.
This site details how to do this using Sky Drive, a Microsoft service.
Is there a common event (opening a program, performing an action, etc.) that precedes the error?
If you run the start-up or run-in test (power on and press F2), does the RAM pass the test? To rule in or out a RAM issue, it may be beneficial to use the run-in test overnight.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Restrict Data Input in an Input Schedule for a particular number of days in a Month

Hi All,
I want to restrict data save in Input Schedule for any particular number of days in a month. BRAD will select number of days for the that particular month and data input for that duration should be disabled.
Duration will be dynamic and will be decided by BRAD.
Basically this is a requirement of BPF, but I have thought of doing in this manner.
Regards,
Mayank

Hi Vadim
I saw your this solution:
Dim epm As New FPMXLClient.EPMAddInAutomation
Dim blnMySave As Boolean
Public Function BEFORE_SAVE() As Boolean
If blnMySave Then
    BEFORE_SAVE = True
Else
    MsgBox "Please use button on the worksheet!"
    BEFORE_SAVE = False
End If
End Function
It seems as if this may help me, but can you please guide me how to trigger this function for a change of value in any particular cell, in an input form.

How to sample a data input waveform with a trigger input waveform

Hi,
I am using the NI USB-5132 digitizer to receive two inputs: one is an analog data waveform and one is a digital trigger waveform.
Is there a way to generate a third waveform/array of data that corresponds to the data waveform being sampled only once per rising edge of the trigger input?
-Thanks

Timothy,
First of all thanks for the reply, I've been really busy this last week and haven't been able to reply.
Right now I have my data signal on channel 0 of the NI USB-5138, and I have the trigger on channel 1. I have attached two corrections of how the signals look coming in (one is zoomed out, one is zoomed in, trigger is the red one the zoomed in one). The trigger signal has 128 square pulses per scan that correspond to the time that I would like to sample 128 different high values for the data input. I also have a 3rd input which has a falling edge for the start of each scan. As you can see in the zoomed out waveform graph, the data input consists of consecutive scans of data.
My end goal would be to process the data so that I have 128 different arrays of 10-20 data points (each data point represents a different scan), with each of the 128-array corresponding to a different element in the 128-long scan, and how it has changed over time. So for example, if the data at array location 3 changes from 0 V at scan t0 to 2.5 V at scan t1, then back down to 0 V at scan t2, then I would like to have an array that looks like:
Array of data for location[3]
Time: t0 t1 t2
Voltage: 0 2.5 0
My biggest challege has been setting up these arrays. Would it be best to capture 10-20 scans using the 'Acquire N Samples', and then do post processing? I also experimented with the PtbyPt VIs, which seem interesting because I would like to do as much of my work in real time as possible, but I'm not too familiar with these or with Labview.
Any help would be much appreciated.
-Ddetone
Attachments:
zoomedOut.JPG ‏213 KB
zoomedIn.JPG ‏242 KB

TS3694 Upgrading my iPad2 to iOS6 seems to have worked but now have a 3014 error message, have tried following the support advice but seem to be going round in circles.

Upgrading my iPad2 to iOS6 seems to have worked but now have a 3014 error message, have tried following the support advice but seem to be going round in circles and can't see what is wrong.
iPod linked to my MacBook which is upto date and running Mountain Lion
Noted that my wi-fi here is very slow, could that be an issue?

From 3rd link below.
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1.    Install the latest version of iTunes.
    2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    4.    Try to restore from another known-good computer and network.
    5.    If the errors persist on another computer, the device may need service.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

HT4972 after upgrading my iphone4 to ios7.04, the 'restore' in itunes seems to be going round in circles resulting in the iphone wanting to continually 'restore' every time. Whats happening here?

after upgrading my iphone4 to ios7.04, the 'restore' in itunes seems to be going round in circles resulting in the iphone wanting to continually 'restore' every time. Whats happening here?

Hello Filbert,
Thank you for providing the details of the issue you are experiencing with your iPhone wanting to continually restore. I found an article with steps to address the issue you described:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please try to troubleshoot security software issues.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT204053 Hi my icloud is telling me to verify my account - check my e-mail on how to verify but I havent had an e-mail to verify and I seem to keep going round in circles can anybody help?

Hi my icloud is telling me to verify my account - check my e-mail on how to verify but I havent had an e-mail to verify and i seem to keep going round in circles can anybody help please?

Perhaps that email you're waiting for was blocked as spam or is in your junk folder. Something like that.

Error in saving large value with the data input query

Hi,
I am trying to save a large value in 0Quantity using the data input query into a realtime infocube
e-g
123456789.1234
Error says too many digits.
When i try to save 8 digits before the decimal point ,no error, if it is 9digits before decimal it's thro' error.
Is there any limitation before the decimal.
i know that 0Quantity can take 17 digits including the sign.
Any suggestions.?
regards,
ram

try budgetting in thousands in stead of units? (setting on query itself)
D

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

An automatic update arrived and installed itself but then told me it was incompatible with my version of Mac: 10.5.8. Firefox version 3.6.26 is on it now. It seems to work the same. Is there going to be a problem or should I ignore that message?

An automatic update arrived and installed itself but then told me it was incompatible with my version of Mac: 10.5.8. Firefox version 3.6.26 is on it now. It seems to work the same. Is there going to be a problem or should I ignore that message?
If I must replace it where do I get an older version?
Thanks

Firefox '''4 '''versions '''and later do not run on a PowerPC Mac''' and require at least OS X 10.5 and an '''Intel Mac'''.
The latest''' supported''' version for your os is '''3.6.26''' , your are fully updated.
see for more info:
[http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
[http://www.mozilla.org/en-US/firefox/10.0/system-requirements/ Firefox 10 System Requirements]
[For older Macs that aren't supported in Firefox 4+ versions, if you like, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8]
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Tree-control for data input?

Hi,
I need to program an input screen for values that have hierarchical dependencies (e.g. sums). I feel, the most adequate user-interface would be a tree control, because of the data dependencies and also because the users asked for a possibility to collapse/expand parts of the data during input.
I had a look at CL_GUI_COLUMN_TREE, but I'm not sure, if it can be used for data input. Has anyone done something like this before or can anybody direct me to some additional sample coding? (the sample coding in the reuse library didn't do it...)
Thanks for your help, greetings, Kathrin!

Hello Kathrin,
Since you say that the user's input is hierarchical in nature, it is nice to have a tree-control for input. But, the choice of using a custom-control-version of the tree is a cause for some concern. I cannot recollect any of the SAP screens where the input can be given through such a tree framework (please do let me know if you have come across one). The problem with such a tree would be in the areas of even-handling. Filling the tree with appropriate data at the right times would be another challenge.
However, there's one alternative that I would like to direct your attention to. You must have observed another kind of tree, when you select an application component from the APPLICATION HIERARCHY, which is just like a list. Also, the Transport Organizer (SE09), Menu Painter (SE41) etc., have this kind of a tree. You can use this if you (or rather your users) are very particular on having a tree display. For more information, you can see the Function Group SEUT, which has the required function modules to accomplish the same. The Function Group is well documented, and you might have to work a little on the function modules themselves.
Please do let me know if this is a suitable option to meet your requirement. All the best,
Regards,
Anand Mandalika.

Date input seems to be going to US format when it should be uk

Similar Messages

Maybe you are looking for