Date logic needed
select-options : mbadat for eban-badat.
I wish to restrict my user on selection screen.
As soon as user enters the date range it should validate that date range should not be greater than one month.
& i wish to restric multiple selection.
Plz guide.
Data : v_days type PEA_SCRDD.
if mbadat is not INITIAL.
CALL FUNCTION 'HR_HK_DIFF_BT_2_DATES'
EXPORTING
DATE1 = mbadat-high
DATE2 = mbadat-low
OUTPUT_FORMAT = '02'
IMPORTING
YEARS =
MONTHS =
DAYS = v_days
EXCEPTIONS
INVALID_DATES_SPECIFIED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF v_days > 31.
MESSAGE 'Date Range should be less than 1 Month' TYPE 'E'.
ENDIF.
endif.
i hav defined this way but its giving dump for v_days.
Similar Messages
-
Disk Utility - Partition map needs repair because a data partition needs loader space.
I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
And in Terminal:
My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
** /dev/rdisk0s2 (NO WRITE)
Can't open /dev/rdisk0s2: Permission denied
That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
I am hoping to fix it using an external Yosemite installation media: see this guide -
http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
And as a last resort to reinstall.
I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
Otherwise you can file it safely under software design calamity. -
Hello,
We need some help with an SSAS MDX query based on date logic. One of the problems is that I don't have access to the Cube but have been given a query example with the logic needed for the calculation. Here's the scenario;
The ETL process will run on the first Tuesday after the 15<sup>th</sup> of a given month. The Analysis Cube data queried should include the current year up to the end of the previous month. For example, on May 19<sup>th</sup>
(the first Tuesday on or after the 15th) the query should include data from January 1<sup>st</sup> through April 30<sup>th</sup>.
The 15<sup>th</sup> of the month is not part of the query, it is a factor in when the query is run. The query will always be in terms of complete months.
SELECT
NON EMPTY { [Measures].[Revenue Amount],
[Measures].[Utilization],
[Measures].[AVG Revenue Rate],
[Measures].[Actual Hours] }
ON
COLUMNS,
NON EMPTY { ([dimConsultant].[User Id TT].[User Id TT].ALLMEMBERS * [dimConsultant].[Full Name].[Full Name].ALLMEMBERS * [dimConsultant].[Employee
Type].[Employee Type].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION,
MEMBER_UNIQUE_NAME
ON
ROWS
FROM
( SELECT
( { [dimDate].[Week Date].[1/4/2015], [dimDate].[Week Date].[1/11/2015], [dimDate].[Week Date].[1/18/2015], [dimDate].[Week Date].[1/25/2015], [dimDate].[Week Date].[2/1/2015] } )
ON
COLUMNS
FROM
( SELECT
( { [dimIsBillable].[Is Billable].&[True] } )
ON
COLUMNS
FROM
[SSASRBA]
WHERE
( [dimIsBillable].[Is Billable].&[True], [dimDate].[Week Date].CurrentMember ) CELL PROPERTIES VALUE,
BACK_COLOR,
FORE_COLOR,
FORMATTED_VALUE,
FORMAT_STRING,
FONT_NAME,
FONT_SIZE,
FONT_FLAGSHi Hans,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Simon Hou
TechNet Community Support -
Hi Team
I have requirement below , can you please help me with sql logic
My input table is below
INC_NUM
FA_ADD
HZ_ADD
PARENT_INC_NUM
ID
A0001
A
A
A0001-02
A
A
A0001
1
A0001-04
B
C
A0001
1
A0001-05
B
C
A0001
1
A0001-09
B
S
A0001
1
A0001-07
D
A
A0001
1
B0001
J
K
B0001-03
L
M
B0001
2
B0001-04
J
K
B0001
2
B0001-05
A
B
B0001
2
B0001-06
A
B
B0001
2
B0001-07
A
B
B0001
2
C0001-02
A
B
C0001-03
A
C
C0001-02
3
C0001-05
A
B
C0001-02
3
My output
INC_NUM
FA_ADD
HZ_ADD
PARENT_INC_NUM
A0001
A
A
A0001-02
A
A
A0001
A0001-04
B
C
A0001-05
B
C
A0001-09
B
S
A0001-07
D
A
B0001
J
K
B0001-03
L
M
B0001-04
J
K
B0001
B0001-05
A
B
B0001-06
A
B
B0001-07
A
B
C0001-02
A
B
C0001-03
A
C
C0001-05
A
B
C0001-02
Here i n considering null values of parent_inc_num or null values of ID as Parent record ID
And i m comparing this record FA_ADD and HZ_ADD with its child records FA_ADD and HZ_ADD ,If they matches then i m assigning Parent_INC_NUM else null
Let me take example of record C0001-02, it has null values of PARENT_INC_NUM (or null for ID)
So C0001-02 is considered as base record ,
Now i m comparing FA_ADD and HZ_ADD values of C0001-02 with its child records FA_ADD and HZ-ADD (ie C0001-03,C0001-05 )
C0001-03 doesnt match so i m assigning null in target else i m assigning its base record ie C0001-02
Below is table sample data
could you please help
with t as
(select 'A0001' as INC_NUM,'A' as FA_ADD,'A' as HZ_ADD ,null as PARENT_INC_NUM ,null as ID from dual
union all
select 'A0001-02' as INC_NUM,'A' as FA_ADD,'A' as HZ_ADD ,'A0001' as PARENT_INC_NUM ,1 as ID from dual
union all
select 'A0001-04' as INC_NUM,'B' as FA_ADD,'C' as HZ_ADD ,'A0001' as PARENT_INC_NUM ,1 as ID from dual
union all
select 'A0001-05' as INC_NUM,'B' as FA_ADD,'C' as HZ_ADD ,'A0001' as PARENT_INC_NUM , 1 as ID from dual
union all
select 'A0001-09' as INC_NUM,'B' as FA_ADD,'S' as HZ_ADD ,'A0001' as PARENT_INC_NUM,1 as ID from dual
union all
select 'A0001-07' as INC_NUM,'D' as FA_ADD,'A' as HZ_ADD ,'A0001' as PARENT_INC_NUM,1 as ID from dual
union all
select 'B0001' as INC_NUM,'J' as FA_ADD,'K' as HZ_ADD ,null as PARENT_INC_NUM , null as ID from dual
union all
select 'B0001-03' as INC_NUM,'L' as FA_ADD,'M' as HZ_ADD ,'B0001' as PARENT_INC_NUM,2 as ID from dual
union all
select 'B0001-04' as INC_NUM,'J' as FA_ADD,'K' as HZ_ADD ,'B0001' as PARENT_INC_NUM ,2 as ID from dual
union all
select 'B0001-05' as INC_NUM,'A' as FA_ADD,'B' as HZ_ADD ,'B0001' as PARENT_INC_NUM,2 as ID from dual
union all
select 'B0001-06' as INC_NUM,'A' as FA_ADD,'B' as HZ_ADD ,'B0001' as PARENT_INC_NUM,2 as ID from dual
union all
select 'B0001-07' as INC_NUM,'A' as FA_ADD,'B' as HZ_ADD ,'B0001' as PARENT_INC_NUM,2 as ID from dual
union all
select 'C0001-02' ,'A','B',null,null from dual
union all
select 'C0001-03','A','C','C0001-02',3 from dual
union all
select 'C0001-05','A','B','C0001-02',3 from dual
select * from t
I have 100 thousands of records of this data ,so need to take care of performance as well
Thank you
Sumanthwith t as
(select 'A0001' INC_NUM,'A' FA_ADD,'A' HZ_ADD ,null as PARENT_INC_NUM ,null as ID from dual union all
select 'A0001-02','A','A','A0001',1 from dual union all
select 'A0001-04','B','C','A0001',1 from dual union all
select 'A0001-05','B','C','A0001',1 from dual union all
select 'A0001-09','B','S','A0001',1 from dual union all
select 'A0001-07','D','A','A0001',1 from dual union all
select 'B0001','J','K',null,null from dual union all
select 'B0001-03','L','M','B0001',2 from dual union all
select 'B0001-04','J','K','B0001',2 from dual union all
select 'B0001-05','A','B','B0001',2 from dual union all
select 'B0001-06','A','B','B0001',2 from dual union all
select 'B0001-07','A','B','B0001',2 from dual union all
select 'C0001-03' ,'A','B',null,null from dual union all
select 'C0001-02','A','C','C0001-03',3 from dual union all
select 'C0001-05','A','B','C0001-03',3 from dual union all
select 'C0001-06','A','B','C0001-03',3 from dual
select INC_NUM,FA_ADD,HZ_ADD,
case when fa_add = connect_by_root fa_add
and hz_add = connect_by_root hz_add
then parent_inc_num
end parent_inc_num
from t
start with parent_inc_num is null
connect by prior inc_num = parent_inc_num
INC_NUM
FA_ADD
HZ_ADD
PARENT_INC_NUM
A0001
A
A
A0001-02
A
A
A0001
A0001-04
B
C
A0001-05
B
C
A0001-07
D
A
A0001-09
B
S
B0001
J
K
B0001-03
L
M
B0001-04
J
K
B0001
B0001-05
A
B
B0001-06
A
B
B0001-07
A
B
C0001-03
A
B
C0001-02
A
C
C0001-05
A
B
C0001-03
C0001-06
A
B
C0001-03
Regards
Etbin -
Last Consumption & Last receipt date logic
Hi
I am facing some issue while developing BI Stock report where user wants last consumption date & last receipt date in the report.
But issue is that when i am going to develop BI query how can i differentiate date for both consumption & receipt because consumption & receipt has differentiate with movement type (suppose Mov type : 101 is for receipt & 261 is for consumption then if i use exceptional aggregation and put last value & reference char as Mov type then all 101 & 261 mov type data will come.
Please guide for developing last consuption & last receipt date logic
Regards,
GauravHi Anshu
Thanks for your helpful reply.
This is my last option as you suggested. But i will share you my concern that i have developed report on 0IC_C03 & in our business scenario, If i change ETL Structure then we need to delete target data, & we have millions of records if i reconstruct the data then it will take 4-5 days times. Also, some times our marker is interrupted then we need to again the same activity so i want to avoid the same activity in Workbench side and do all required changes in BI Query side.
Can we use customer variable for time characteristics for the same issue.
If there is any other idea in your mind, Please share. -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
Why does logic need to be "warmed up"?
Whenever I start logic pro 7.1.1 and load up my most recent song, I always have to go through a series of core overloads. Most of my softsynths ( I typically use around 25 ) are EXS24 samples, and it seems as though whenever I load up an instrument I have a huge spike in CPU when a new note is played for the first time, and then it plays fine after that. The problem is when I load up a song and press play, I have to go through an annoying and tedious series of core overloads every time a new note is played until logic cashes all of the notes and I can actualy get to work. Is there any settings that I should change so logic will play the song the first time?
My core audio settings
256mb buffer
larger disk buffer
medium process buffer range
power book g4 1.5ghz 512mb ram logic 7.1.1 pro512mb ram
That's problem #1
larger disk buffer
Not a good idea, in view of your low RAM.
Are you using an external drive for your projects?
Having said that, I know this has been mentioned here before, so you might want to search for EXS24+missing notes. I think it was iSchwartz that had a theory about this - but I know that even with plenty of memory it seems that Logic needs its pump primed sometimes. -
Date format needs to be in selection screen mm/dd/yyyy but in alv output ..
hi
i need help on displaying date in alv output
date format needs to be in selection screen mm/dd/yyyy but in alv output ..it should be displayed as yyyymmdd
regards
Nishanthi,
you are passing the value to ALv using an internal table.
so store the format YYYYMMDD date in the internal table and pass it to ALV.
use the below FM
DD/MM/YYYY -> YYYYMMDD
<b>CONVERSION_EXIT_PDATE_INPUT</b>
rgds
Anver -
How much data is needed to download the whole creative suite?
How much data is needed to download the whole creative suite?
Jacoedit you can see the size of the base installers at http://prodesigntools.com/adobe-cc-direct-download-links.html. Please be aware that you will still need to download the updates for the applications as well.
-
Things that Logic needs to be #1!!!!
I think Logic needs to do some work on the waveform edit.
More like Pro Tools.
Right now, the main thing i miss is not to be able to quantize an Apple Loop. I mean, some parts of the loop that are offbeat are impossible to quantize.
Message was edited by: Bob AntisYes,i mean the blue apple loops.
I wouldn't even mind if i could tweak the normal aiff loops like Ableton Live or Pro Tools, to be able to quantize by yourself with precision!
I think Apple should include that in their next update, it's so important for waveform editing. My self, i edit a loop in Pro Tools,then export it and work it in Logic, it's so frustrating!!! -
Error -2003: a data handler needed by the movie could not be found
Hello.
I just purchased QuickTime Pro and the MPEG-2 add-on for it, for the single purpose of transcoding some MPEG-2 recordings to H.264. However, when I try to open any of my MPEG-2 files in Quicktime, I get the message: "error -2003: a data handler needed by the movie could not be found (my-filename.mpg)"
I can play these files in a number of different free players--VLC, Mplayer, Windows Media Player, RealPlayer... but not in the player I paid $50 for.
Can someone please help me?That doesn't really help. Besides, I haven't even got to the point where I'm trying to export. I get this error message when I try to open the file. I can't even play back the clip.
And the MPEG-2 page clearly states: "The QuickTime MPEG-2 Playback Component provides QuickTime users with the ability to import and play back MPEG-2 content, including both multiplexed (a.k.a. muxed, where the audio and video tracks are interleaved together into one track) and non-multiplexed (a.k.a. elementary) streams."
Also, Streamclip crashes when I try to load my MPEG-2 clips, so that's not going to work (and even if it did, I am trying to find a simple way to take the HDTV content I've recorded off the air and get it onto my AppleTV--I want fewer steps, not more).
Looks like I'll have to waste some time calling customer service to get a refund, since there's no way to do this via the website. -
Profit Center Master Data- Segement need to be changed
Hello Gurus,
We have somehow set wrong segment in Profit Center Master Data, We need to change the segment. Transction is posted to the profit center what is the easy way out to change the segment for profit Center master data?
Any help will be apreciated? i have gone through the SAP Note
940721 - KE52: Segment in prof center master record cannot be changed
Or a work around solution.
Thanks
PrasadHi Prasad,
As you already find out, once there is transaction data on a profit center, the segment field is no longer changeable in order to prevent inconsistencies and incorrect result from the segment reporting point of view. This is standard system behaviour!
You can try with the the following *Notes. It will provide further corrections relevant for your issue.
*Notes:1373616 Segment in profit center changed despite transaction data
1037986 KE52: Changing the segment in the profit center master data
Regards
Eugene -
Installer could not locate the data it needed... Entourage 2008
Hi, I'm a bit of newbie to Mac's... I am trying to work out why a copy of Entourage 2008 I have wont install... I have posted on the Mactopia forums but with no success, so I thought I would try here, as I am not sure if it is an Entourage/Microsoft issue or a Mac OS issue. Every time I try to install my downloaded e2008.iso (came with my Exchange server rental) I get the following error: "Install Failed. The installer could not locate the data it needed to install the software. Check your install media or internet connection and try again or contact the software manufacturer for assistance". I am assured that the download I have is complete and 'verified'. When I double click the .iso file, it mounts and then opens - i then click through 'Office Installer_mpkg / contents / distribution.dist to begin the install. If anyone has any advice on what I might be doing wrong I would appreciate it! Thanks.
Thanks - it is reputable (should be...) as it is from the company i get my exchange server rental through, part of the 'package' is a download of entourage or outlook. Unfortunately they do not offer very good mac support... Have gone back to them to make it their problem! thanks all the same.
-
i recently upgraded my OS, all my data is backed up on my laptop, to restore the data i need to enter the password to my phone data backup, which i forgot, is there anyway i could get back?
No. If there was a way of getting hold of the password, it wouldn't be much of a security system, would it? The backup is lost if you can't remember.
Maybe you are looking for
-
Business area field blank during line items display
hiii... In our system vat input tax gl n cenvat clg a/c gl enries r not showing business area wise... when i check the line items of these general ledgers the business area field is blank...the problem is tha how i can identify the data for diffe
-
How do I create a Snow Leopard partition?
I just upgraded to Lion, and unfortunately, can't access my Quicken 2007. (Didn't realize Quicken didn't work in Lion until after I downloaded it. Clearly, I live in a barrel.) I just downloaded iBank and need to export my Quicken data to it. Fro
-
White Screen in menu and simulator
I'm running into a problem of DVD Studio Pro displaying a white menu screen when the program opens. I need to toggle between the different screen displays in order to see any file that I assign as the background whether it be video or a still. My sti
-
Guru The scenario is we are using invoice document KR and a custom invoice document named LM which ia a copy of document type KR . In the KSB1 report for cost center Name of vendor and Vendor number are appearing for invoice posted through docu
-
Fireworks 8 png won't stay open
I cannot get a 532 kb .png to open that was created by me in Fireworks 8. I have tried other similar files with the same result, that is, it opens briefly, then closes and crashes the program. I can creat a new png Any help would be appreciated. This