Date modified attribute not changing

hie,
the situation is this:
everytime I modify a file in netbeans or zend (a javabased php editor), the changes made to the file are written ok, but the "date modified" attribute of the file is not changed, thous, when I try to commit (cvs) the file, the cvs clients tells me that theres nothing to commit. I have to open the file with notepad, do something, and then save it, in order to get the date changed and then send it.
I post this here, because i believe its a config java thing, that could solve both IDE problems.
thanks in advance for any idea.

Apparently you are maintaining the file open; until closed, the date is not updated.

Similar Messages

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

Is there a way to manually custom-edit the "Date created" and "Date modified" attributes of files in Mac OS 10.6?

In "List View" in a Finder window, among the many column options are "Date created" and "Date modified." In "View Options" (command-J) for any folder, one can add these columns, along with the standard ones "Size," "Kind," "Label," etc.
A user can alter a file's name, and a file's "label" (i.e. its color). On the other hand, a user can NOT arbitrarily edit/alter a file's official "size" -- other than by physically altering the contents of the file itself, obviously.
But what about a file's "Date created" and "Date modified"? Can either of those be manually edited/changed, just as a file's name can be changed -- or is a file's creation-date an immutable attribute beyond the editorial reach of the user, just as a file's "size" is?
And yes, a person can "alter" a file's "Date modified" by simply modifying the file, which would change its "Date modified" to be the moment it was last altered (i.e. right now). But (and here's the key question) can a user somehow get inside a file's defining attributes and arbitrarily change a file's modification date to be at any desired point in the past that's AFTER its creation date and BEFORE the present moment? Or will so doing cause the operating system to blow a gasket?
If it is possible to arbitrarily manually alter a file's creation date or modification date, how would it be done (in 10.6)? And if it is NOT possible, then why not?

sanjempet --
Whew, that's a relief!
But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started!

SSAS Date Dimension attribute not displaying all members when browsed singly

I have an SSAS Cube database that holds data from 2009 to 2013 (5 years)
There is a Date Dimension in the database which holds a "Calender Period" Hierarchy with the attributes CalenderYear >> Quarter >> MonthYear >> Day .
I am connecting to the cube via Microsot EXCEL
Whenever i try to browse this hierarchy alone in the spread sheet, the first attribute as per the hierarchy shown above i.e. Calender Year does not display all the members, that is confusing the users to assume that the cube is not processed with the latest
data, which is not the case. However as soon as i try to browse any measure with this dimension, the data automatically shows for the latest dates of 2013 as per the expectations.
The perspective that is selected while connecting to the Cube in this case is the one that is by default the one including all the Cube Objects.
Whenever i try to browse the same cube for the same Dimension Hierarchy but in a separate user perspective i get the latest three Calender Years i.e. 2011,2012 and 2013 but not the complete years 2009 to 2013.
When i was browsing this earlier by the original base perspective (which has all the cube objects visible) the Calender Years displayed were 2009,2010,2011&2012 but not 2013 which should be there.
I checked the base view in the DB that is used to create this Dimension, that is fetching the complete data for 2009 to 2013.
I have also verified that this issue is still there if i try to browse the cube from the SSMS.
Can anyone help me to get all the years from 2009 to 2013 (the years for which my cube has data) become visible as soon as i drop it alone into the Spreadsheet?
Thanks
Suvrat

Thanks for your response Muthukumaran.
I did not know about this default measure property of the SSAS cube, it would be nice if you could also tell me how to check which is the default measure for a cube.
I understand your point that if a particular measure group does not have data for a year then that particular year will be skipped as per the default excel settings, which when disabled allowed all the years to be displayed, but in that case every time the
users connect to the cube via excel, they will have to configure this property.
I would like to share the way i resolved this issue:
I went ahead and simply did a Process Full for the Date dimension. The years started to display by default as per the expectations. Now after observing this change, as per my understanding I believe this issue was due to the CACHE of the cube not being updated
for the date dimension. As after each incremental load of the DWH we processed the cube & while processing the cube the dimensions were set for a Process Update and the Measure Groups were set for a Process Full. This caused this issue, and we could resolve
this once the Date Dimension was processed full.
Thanks
Suvrat Rai

Date Modified on folders changes globally after crashed

Our server running Windows Server 2003 R2 shut down unexpectedly due to a power issue and the battery back didn't kick on (a separate issue). After starting back up, all of the folders on the server have updated their Date Modified to the current date. This
wouldn't be a problem except that my differential backup see all of the folders as modified and backs up everything during the differential backup which doesn't work for me. Is there a way to revert this change or prevent it in the future?
EDIT: Also, The C: drive is not affected in this manner - only the drive that stores our job data.

Hi,
Based on my research, the Date Modified changed could be due to corrupt Update Sequence Number Journal. The USN Journal is a feature of NTFS which maintains a record of changes made to the volume.
You could try to refer to article below to check if it could resolve the issue.
Error messages when you try to gain access to an NTFS volume
http://support.microsoft.com/kb/311724
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Is Bridge supposed to sort raw files by date modified? Not on my systems.

I have just installed photoshop/bridge cs5 on two windows 7 systems, home premium 64 bit, one an i3 chip and the other an i7 chip. I was formerly using cs3.
I see that Bridge is not sorting my raw files by date modified like it did before. It sorts jpg files okay. I noticed that the xmp files associated with the raw files, when I hover over them in Windows Explorer show the correct modified date but the thumbnail icon shows only creation date, which I assume is as it shou ld be. Why doesn't Bridge CS5 sort raw files by date modified as it did in CS3? CS3 must have referred to the xmp file modified date to use for sorting, I would think.
I should also mention that the metadata file does not show the correct date modified, but gives the same date as the creation date. Also the thumbnails for raw images that have been modified correctly show the icon that indicates it was modified.
Also, I see that when you hover over a thumbnail in Bridge CS5 nothing is revealed about the file. In CS3 Bridge hovering over a thumbnail showed several pieces of data about the file including anything in the file info.
Is this just how Bridge CS5 works or have I missed a setting somewhere in Bridge or Windows?

Curt, thanks for your response. The tool tips
was not checked and did result in "hovering"
working. I'm not sure why that's called tool tips, but okay.
I have just installed the software in the last
few days. I almost immediately got an update
notice and installed the update. I thought I was
up to date. Then, just a while ago I got another
update notice. After installing it the sorting
now works. Thanks much. Problems seem to be solved.

Finder Window - Date Modified Column Keeps Changing

When I open a Finder window, change the size of the "Date Modified" column then close the Finder window, the next time I open the same Finder window, the "Date Modified" column will compress the size of the column.
Why isn't Finder 10.9 maintaining my column changes?
Any assitance or insight whould be appreciated.

I solved the scrunched Date Modified column header in a similar fashion but added the Date Added field, which fixed the width of both Date columns.
After doing so, I now find both Date-oriented columns display and read dynamically the actual date and time.
I'm now looking for a solution to that issue, explained here:
finder window date added date modified show date time always

Ordering files by date modified is not working

Sorry for the print in Portuguese. Ordering by date modified (or any other date-based scheme) has worked until yesterday. Today all files are market as "no date" ("sem data" text in the print), although the all the file metadata is fine.
Any suggestions?

Curt, thanks for your response. The tool tips
was not checked and did result in "hovering"
working. I'm not sure why that's called tool tips, but okay.
I have just installed the software in the last
few days. I almost immediately got an update
notice and installed the update. I thought I was
up to date. Then, just a while ago I got another
update notice. After installing it the sorting
now works. Thanks much. Problems seem to be solved.

Date Modified problem not fixed . . . maybe never?

Dunno if this has come up recently--I couldn't find it in a search. But the problem of a file, being modified and updated, not showing up as such in a folder unless clicked, is a massive one, and obviously has not been fixed with 4.5. I can modify a file, say an FCP movie, then save it, but it will still be down on the list date-wise that it was before I modified it. Only if I highlight it with a mouse click does it go to the top of the "Date Modified" column.
This is inexcusable. OS 9 was instantaneous. What is it about OS X that Apple can't get right in this incredibly basic Finder function?

Hello Ben
If you want to use BT and make connection between the notebook and your mobile phone you must not be any expert. I have done it several times and it works perfectly.
I can really not understand that your dealer was not able to help you. If you want to use the mobile phone as modem you can configure it on follow way:
1. activate Bluetooth using FN+F8 key combination
2. install all new hardware components if necessary (few of them)
3. start Bluetooth stack (BT Manager) using small icon near the time information using right mouse button > Bluetooth Settings
4. activate the Bluetooth on the mobile phone (discoverable)
5. choose Express mode > Next
6. Choose visible device listed in Bluetooth device list > Next
7. Choose pass key for identification (1234)
8. Enter the key into mobile phone. Paring will be success
9. Go to Next and configure the internet connection (provider number) > Finish
10. The new connection will be created in Bluetooth stack utility
11. You can start the dialing up with double click or click with right mouse button and choose Connect
In my case I use Motorola mobile phone and I am also able to send the pictures to the notebook.
Please make it again. It must works!
Good luck!

Jpeg's "date modified" isn't changing?

Using CS5.5 / Win7 x64.
We do a lot of stuff using smart objects - replacing logos etc. Load the template image, swap the logo, save a new PSD file with the new logo on it in case we need it again, then save a jpeg for the client.
Oddly (and I think this has only started to happen since I've been working at home and saving onto a local drive on a laptop, rather than onto a server) the new PSD has today's date as its Date Modified, but the jpeg doesn't - it seems to use the original image's created date instead, which might be a few years ago in the case of some of the images. So when I'm attaching files to an email to send to the client, all the jpegs I want are all over the folder, instead of at the top with their associated PS files (sorted by date, newest first).
Only a small niggle, but with the volume of images I'm having to do, it slows me down a lot, and I'm risking missing images. Is this a Windows thing, or some option in Photoshop I've overlooked somewhere?

It turns out I'm an idiot. I was looking at the Date field rather than Date Modified, so it was a Windows thing after all.
I think it's lunchtime...

Date format is not changing when I switch language (From English To French)

Hi Guys,
In our portal (NW04-EP6) application when I switch English to French,date format doesn't changed?
Do you kow how can I fix it?
Thanks,
Maryam

Hi Maryam,
The langauage is set according to this priority:
1) Language assigned to the user (in the portal)
2) Browser's Language
3) System's language
4) JVM's Language
Check your settings.
Omri

Date format does not change with the Regional and Language Options in 2008

I have a one-column report that was created using the SQL "select current_date" in postgres. (Thinks select getdate() ).
In Crystal Reports XI when I change the "Standards and Formats" of Regional Options to:
English (United States) the date is in the format mm/dd/yy
English (Canada) the date is in the format dd/mm/yy
Japan the date is in the format yyyy/mm/dd
In Crystal Reports 2008 when I change the "Standards and Formats" of Regional Options to:
English (United States) the date is in the format mm/dd/yy
English (Canada) the date is in the format mm/dd/yy
Japan the date is in the format mm/dd/yy
It doesn't change. Is this a bug?
Thanks in advance,
J

hey Jason,
i am going through some of the old forum posts and saw that no one replied to your language options post.
for cr 2008, there are language packs for the applicable languages. there are advantages for this as you can save installation space with the option of installing language packs for each language that you want the designer application to be in.
you have seen the disadvantage as it doesn't work the same as before.
you do not need the language packs for testing though. in the crystal reports View menu, switch up to the Product Viewing Locale to test objects which are using "system" settings such as dates.
if you do wish to install any language packs so that you can change up the actual language in the designer, go to your install media. in the install files "\package\langs\" directory, you will see a folder for each language that you need. install the desired language(s).
once you have installed a language pack and then restart the cr designer, you will now have the additional language in the View > Product Locale.
so in summary...Product Locale will change the language of the whole designer...language packs are needed for this.
Preferred System Locale can be used to test languages without having to change your windows system settings.
i hope that this helps,
jamie

Data element description not changing in ALV output

Hi Friends
I changed the description of the data element from xx to yy,but this is not reflecting in the alv output,
It is still showing xx,After activating everything and running the report I get the same problem,
Can any one help?

Hi,
Write your code in following manner.
ATA:ist_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: wa_fieldcat LIKE LINE OF ist_fieldcat.
DATA : l_pos TYPE i VALUE 1.
ist_fieldcat-fieldname = 'POSID'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 24.
ist_fieldcat-col_pos   = l_pos.
* ist_fieldcat-ddictxt = 'L'.
ist_fieldcat-key = 'X'.
ist_fieldcat-seltext_l = 'Appropriation Request Number'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
l_pos = l_pos + 1.
ist_fieldcat-fieldname = 'TXT04'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 4.
ist_fieldcat-col_pos   = l_pos.
ist_fieldcat-ddictxt = 'L'.
* ist_fieldcat-key = 'X'.
ist_fieldcat-seltext_l = 'Status'.
ist_fieldcat-EMPHASIZE = 'C400'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
l_pos = l_pos + 1.
ist_fieldcat-fieldname = 'UDATE'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 8.
ist_fieldcat-col_pos   = l_pos.
ist_fieldcat-ddictxt = 'L'.
ist_fieldcat-key = 'X'.
ist_fieldcat-seltext_l = 'Status Date'.
* IST_FIELDCAT-EMPHASIZE = 'C600'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
l_pos = l_pos + 1.
ist_fieldcat-fieldname = 'CRTD'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 4.
ist_fieldcat-col_pos   = l_pos.
ist_fieldcat-ddictxt = 'L'.
* ist_fieldcat-key = 'X'.
    IST_FIELDCAT-EMPHASIZE = 'C700'.
ist_fieldcat-seltext_l = 'Status CRTD'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
<i>Rewards point if helpful</i>
<b>Debjani</b>

Just updated my ITunes, Plays fine, but play count and date played do not change. What is going on?

Updated I Tunes 11.0 and all plays well, just the last date played never changes and the play count remains the same no matter how many times I play the song. Not really sure where to go with this.

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Data in AdvanceDdataGrid not changed

Hello all,
I have really weird problem, I think it's related to datprovider or something similar.
I have data grid in ac class (as attribute of this class), in the main app, I was import that class and create new instance, and create ArrayCollection according to some parameters(inside the main), after the ArrayCollection been created I assign it to the AdvanceDdataGrid's dataProvider, and everything OK till now.
but if I'm trying to change the values in the grid, it's back to previous value immediately, it's seems like the data provider doesn't binded to the ArrayCollection at all, but like I already said I made the assignment to the dataProvider.
PS - The grid created inside ac class, and the main flow handled in ac code.
Thanks in advance,
Avi.

I create a simple example that illustrate the problem, rty to change the grid's values,
Thanks.
<?xml version="1.0" encoding="utf-8"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
        layout="vertical"
        verticalAlign="middle"
        backgroundColor="white" initialize="init();">
    <mx:Script>
        <![CDATA[
        import mx.controls.advancedDataGridClasses.AdvancedDataGridColumnGroup;
        import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
        import mx.controls.AdvancedDataGrid;
        import mx.collections.ArrayCollection;
        import mx.controls.Alert;
            import mx.events.DataGridEvent;
public var arr:ArrayCollection = new ArrayCollection([
{xyz:{x:1,y:2,z:3}},
{xyz:{x:1,y:2,z:3}},
{xyz:{x:1,y:2,z:3}}
public var grid:AdvancedDataGrid = new AdvancedDataGrid();
public var gridColx:AdvancedDataGridColumn = new AdvancedDataGridColumn("x");
public var gridColy:AdvancedDataGridColumn = new AdvancedDataGridColumn("y");
public var gridColz:AdvancedDataGridColumn = new AdvancedDataGridColumn("z");
public var gridColGroup:AdvancedDataGridColumnGroup = new AdvancedDataGridColumnGroup("xyz");
            private function init():void
            gridColGroup.dataField = "xyz";
            gridColx.dataField = "x" ;
            gridColy.dataField = "y" ;
            gridColz.dataField = "z" ;
            gridColz.editable = true ;
            gridColGroup.children = [gridColx,gridColy,gridColz];
            grid.groupedColumns = [gridColGroup]
            grid.editable = "item";
            grid.dataProvider = arr ;
            this.addChild(grid);
        ]]>
    </mx:Script>
</mx:Application>

Date modified attribute not changing

Similar Messages

Maybe you are looking for