Date not making it to MySQL DB

I just added the Date Picker to my Insert and Update forms and they show up on pages like this:
<br />
<br />http://209.62.4.98/~parishpr/admin/insert.php
<br />
<br />And the date picker looks pretty good but it never makes it to the database and I get 0000-00-00 instead. My table row 'dateAvailable' is set as a DATE type. Which is correct, I would think. So are there any extra steps to get the date to make it from the picker to the DB?
<br />
<br />Here's the code ADDT spews:
<br />
<br />
<br />
<br />
<br />
<table>
<tr>
<td class="KT_th">
<label for="dateAvailable">Date Available:</label>
</td>
<td>
<input name="dateAvailable" id="dateAvailable" value="<?php echo KT_escapeAttribute($row_rsproperties['dateAvailable']); ?>" size="32" wdg:mondayfirst="false" wdg:subtype="Calendar" wdg:mask="<?php echo $KT_screen_date_format; ?>" wdg:type="widget" wdg:singleclick="false" wdg:restricttomask="no" wdg:readonly="true" />
<br /> <?php echo $tNGs->displayFieldHint("dateAvailable");?> <?php echo $tNGs->displayFieldError("properties", "dateAvailable"); ?></td>
</tr>
</table>

I figured out the problem. I was looking at the wrong place in the code. I had the field set up in the AddColumn area as a STRING_TYPE when in fact it should've been a DATE_TYPE.

Similar Messages

  • Data not making it's way into palm desktop - Windows 7/ Old Sony Clie PDA

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    1) Thanks for moving me - I'm incredibly lost!
    2) I have tried the "run as administrator" thing before.  I just changed the UAC settings.  And I tried installing the new driver.  I don't know which part of those (either the change of UAC settings or the attempting to download/ install the new 64 bit driver).  But now when I try to connect via IR, I get "Unable to initiate HotSync operation because the port is in use by another application" on my Clie. 
    3)  I was giddy at the thought of a new driver, but it's not working.  I'm going to post that questions on that thread, I suppose.
    http://forums.palm.com/t5/Windows-HotSync/64-Bit-D​rivers-are-HERE-Thanks-Aceeca-corp/td-p/337516 for searchers.
    I'm going to work on getting the new driver to work.  If not, I'll be back bumping up this thread.  Thank you for your suggestions!
    ETA: I just undid the UAC settings and now my IR connection works again.  My stuff still isn't showing up in Palm Desktop, but at least it *says* it's hotsyincing again via IR.

  • I am confused by the layout of the I tunes Store...recently the entire graphics on the i tunes store pages are a complete mess, not downloading, creating odd layover and jumbled data and making it virtually impossible to access or read. Help!?

    I am confused by the layout of the I tunes Store...Ive had no problems or troubel for YEARS with the I Tunes store, but recently the entire graphics on the i tunes store pages are a complete mess, not downloading, creating odd layover and jumbled data and making it virtually impossible to access or read. I am looking for information or guidance on how to re-boot or fix this - Help?!

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Data not received in PSA Table  0ORGUNIT

    Hi,
    We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
    Thanks in advance
    K

    You can change the size of the Data Packet.
    Open InfoPackge.
    From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
    Default setting of the Source System will be shown.
    Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
    Regards
    Anujit Ghosh

  • How to reflect a new field in Bank data while making payment through F-53?

    Hello Experts,
    How can i reflect a new field (payment reference) in bank data while making payment through F-53?
    I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment.
    I tried it at both level,fsg anf posting key,But no use.
    Is there any other process to make available and required field in BANK DATA of vendor payment?
    Please suggest .
    Regards,
    Sumeya offrin

    Hello Sumeya,
    Please consider note 145864 which explains what you have to do to
    make this field visible in your selection criteria:
    "In Transaction FB00 (Financial Accounting Editing Options -> Open items
    activate the flag 'Payment reference as selection criterion'.
    This is valid for incoming payment; please test if the same procedure
    is valid for outgoing payment as well.
    I  check the  issue, and unfortunately these function seems to not be supported for vendor open items.
    When you try to select the 'Payment Reference' in Additional selections
    the following messages is arised:
    'No account specified, items selected via document no. or reference'
    That means,when you do not specify an account in F-53 you can only
    via Reference and/or document. This is not a bug but system design.
    For additional reference you can check the note 451105.
    The note made clear that the specification of an account is required for vendors during the selection via payment
    reference.
    Kind Regards,
    Fernando Evangelista

  • "Expected Ship Date: Not available at this time." Please help.

    I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
    Please PM with details if possible. Thanks in advance!
    Subject was edited by: Verizon Moderator

        Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
    If not, I have sent you a DM so we may help look into this.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • SAP not making Controlling Document at the time of MIRO

    Dear Guru!
    I have a very peculiar problem which I believe is an error in SAP.
    My problem is that at the time of implemenation of MM the company doesnt have a store. so company ask the consultant to override GRN process and process everything through invoice and all the stock will be charged out to a cost center.
    Now when the invoice of Cost Center (MIRO w/o GRN) is process, SAP doesnt create a controlling document and because there is no controlling document, the company cannot get the cost wise detail.
    Now my question is, if I cannot get a cost center wise data, how can I get that entry. Can I do any entry to get that data or what should be a solution I can tell to my company.
    Regards
    Shah

    Hi,
    First of all the Controlling Mudule have to be activated. Now you are charging all your stock to cost center, so first of all you will have to use the Account Assignment Category K in Purchase Order. Yoou will also have to configure the Account Assignment Category in configuration. You can configure it via OME9. In this setting, Set the only Invoice Reciept Indicator, because you are not making MIGO Docs.
    Now another condition is, you will have to charge all your stock to particular one GL Account so you will make the Cost Element for that GL as Cost Element Category 1. Now that Cost Element have to be assigned to OKB9 and cost center will be assigned there. Do not tick Profitibilty Segment because you are not going to create the document for COPA. So this is the general configuration for Creating CO Document.
    Main thing is, you must check the Controlling Area Settings twise.
    I hope it found useful to you.
    Regards,
    Jigar

  • Data not received in PSA Table

    hi guyz,
    im facing the below issue while loading master data attr from source system to bi system.
    im loading data from 0vendor_attr to ovendor object.
    only half of the records are processed and gets hanged.
    in monitor- administrator workbench its showing (60434 from 157912 records)
    below are the details of the issue:
    Data not received in PSA Table
    Diagnosis
    Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump.
    please guide with your expertise.
    cheerz,
    raps.

    Hi Rajeev,
    Check the job in Background (SM37), you can analyze from here.
    Check the short dump in ST22.and check system performance once.
    If you are facing this problem first time, cancel the background job and make the request red.
    Then repeat the IP again, it will get successful.
    This should be due to performance issue or RFC problem of your system.
    If the job is active in SM37, cancel the job and make the status IP red.
    Re run the IP, it  will get successful.
    Regards,
    Venkatesh
    Edited by: Venky1903 on Aug 15, 2011 2:09 AM

  • Data not received in Data target

    Hi,
    I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
    "Data not received in InfoCube / PSA object / InfoObject
    Diagnosis
    Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump."
    The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
    This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

    Hi,
    I have created new infopackage and ran. Now the following message I have got on the monitor.
    "Data not received in PSA Table
    Diagnosis
    Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump."
    Any more thoughts?
    Thanks,
    Rao.

  • Data not received in InfoCube / PSA object / InfoObject

    Hi Experts,
    i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
    Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
    i hope you all understand my problem. if so please advise.
    Thanks,
    RK
    Edited by: RK on May 21, 2009 6:48 PM

    Did you try looking into short dump about the problem ?
    try these links :
    Short Dump "Data not received in InfoCube / PSA object / InfoObject"
    Short Dump "Data not received in InfoCube / PSA object / InfoObject"

  • Data not received in PSA Table(urgent)

    hello,
    While loading Master data full load
    which is a load of 457070 on 2days back
    where only 4lac records r received to PSA but remaining 57070 was missing
    with error<b> Data not received in PSA Table
    </b>
    when the next day we loaded 5lac records and we got the same error<b> Data not received in PSA Table</b> where except 57070 records remaining all reached PSA
    where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
    I required ur help to solve this
    i will thank by giving points
    Regards
    PSC

    Hi,
    check if there is a TRFC haging in SM58.
    can that be that your DB cannot extend its space for this amount of data.
    How do you perform the load?
    package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
    Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
    As already mentionned it could also be that an IDOC is haging...
    please let us know
    Olivier.

  • Data not received in PSA Table - Data of request already deleted

    Hi
    I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
    And when I click on the PSA table it telling me that  Data of request XXXXXX already deleted.
    I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
    And the short dump analysis just say: 
    A RAISE statement in the program "SAPLRSSM" raised the exception
    condition "NOT_EXIST".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    I've also tried to repeat the load but with no luck.
    Anyone know how to fix this?
    Thank you in advance

    Hi,
    Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
    Also delete the green request in the Source DSO and repeat it.
    Once it loads successfully then load the data to other 3 targets.
    Rgds,
    Ram

  • Data not received in InfoCube / PSA

    Hi Everybody,
    Today all the loads are failed with the Error "Data not received in InfoCube / PSA object / InfoObject", Could you please help how to solve the problem.
    Regards
    BW

    Hi
    First check that your ODS is active
    Then ensure it has data activated and for the selection you want to extract
    What kind of load are you performing? A full or a delta?
    In any case when you fire your InfoPackage from the ODS to the cube a job named BI_REQ* will be kicked. Check this job in SM37. If you can open an InfoPackage with your ODS as DataSource then the DataSource is fine and the transfer program is activated.
    Monitor this job and see what happens.
    If the job is cancelled for any reason, look if there is a dump (ST22), a system message in the log (SM21 on all appserv) and if there is a TRFC transaction with error in BW (SM58).
    Please let me know
    regards,
    Olivier.

  • DroldF.dat not found

    Hi,
    I try to install the following code
    CREATE INDEX IDF_FULL on ECOLORF.INDEXATION(FICHIER)
    INDEXTYPE IS ctxsys.context
    PARAMETERS
    ('datastore CTXSYS.FILE_DATASTORE
    LANGUAGE COLUMN LANGUE
    LEXER mylex
    FORMAT COLUMN FORMAT
    WORDLIST DEFAULT_WORDLIST
    STOPLIST multistop
    MEMORY 2M SYNC (EVERY "SYSDATE + 1/24/6")');
    and I have the error :
    DRG-11446: fichier de base de connaissances fourni C:\oracle\product\10.2.0\db_1\ctx\data\frlx\droldF.dat non installé
    +(file droldF.dat not found)+
    (Same thing with an Oracle 11g on another server)
    When removing 'LEXER mylex' in the create index, it's OK, but I have some difficulties with the french accents.
    The only file in the directory xxxxx\db_1\ctx\data\frlx\ is drfr.is
    On [this forum|http://kb.dbatoolz.com/tp/2796.drg-11446_droldusdat_not_installed.html] , it is told that the missing files are on companion CD in stage/Components/oracle.cartridges.context.knowbase/10.1.0.2.0/1/DataFiles/data.jar, but only iin the R1 release (not the R2)
    But I can't find this companion CD. Where are they in OTN ? How to download old versions ?
    Or more simply : who have all these files droldF.dat, droldUS.dat and can furnish them ?
    Best regards

    Your lexer definition presumably includes INDEX_THEMES = YES.
    If you change that it will work. Otherwise you need to download the database examples for 11g, which include the knowledge base.
    Sometimes can be tricky to find - if you download the full set of files it should include the examples.

  • Data not populating after DS enhancement

    HI pros,
    i have made Data source enhancement.
    i wrote the code in include program.
    when '0FI_GL_40'.
      CHECK NOT c_t_data[] IS INITIAL.
      LOOP AT c_t_data ASSIGNING <fs_data5>.
      SELECT SINGLE matnr FROM bseg INTO <fs_data5>-ZZMATNR
                             where BUKRS eq <fs_data5>-BUKRS and
                                   BELNR eq <fs_data5>-BELNR and
                                   GJAHR eq <fs_data5>-GJAHR and
                                   BUZEI eq <fs_data5>-BUZEI.
    endloop.
    but the data not populating into the report, the Multi provider is real time
    krish..

    Hi,
    Syntax
    ASSIGN mem_area TO <fs> casting_spec range_spec.
    Effect
    This statement assigns the memory area specified using mem_area to the field symbol <fs>. You can assign a data object or a memory area calculated from the address of a data object. After the assignment, the field symbol refers to the assigned memory area and can be used in operand positions. When used in a statement, it behaves like a dereferenced data reference, meaning that the statement works with the content of the memory area.
    The data type with which the assgigned memory area is treated, depends on the specifications in casting_spec. You can either execute an explicit casting or the field symbol takes on the data type of the data object specified in the assignment. A field symbol to which a memory area is assigned, has this data type after the assignment and behaves like a data object of this type.
    The assigned memory area mem_area must be at least as long as the data type specified in casting_spec and must have the same alignment. If the data type determined in casting_spec is deep, the deep components with their type and position must appear in the assigned memory area exactly like this.
    Use the specifications in range_spec to restrict the memory area that can be assigned to the field symbol.
    You have to assign it back to internal table to modify the content.
    Check in debug mode if you have still doubt.
    regards,
    Raju

Maybe you are looking for