Date Profile with Tasks

Is it possible to implement the Date Profile functionality for the Tasks in SAP CRM so that the completion date and time are set automatically by the system, when 'completed' status is set on the Task.
We want to achieve this, can someone guide how to do this.

Hi
Venkat,
If you have changed a date or duration, the system recalculates all dependent dates. To do this, the system uses the calculation sequence assigned to the date type in Customizing.
Check the date profiles and date rules for the transactions
You need to select the date profile and go to date types and select the date type and click on the screen area -dates and you need to enter the number for the display position to view your date type in the transaction otherwise the display of date types will be visible in the transaction type
The path for date profile is SPRO- Basic functions --Date management --Define date profile
Just a suggestion,if you have assigned it to transaction types and item category, so may be after entering the item in the transaction, you might be able to see the dates at header.
Please read below which is source from SAP Help.
For every transaction at the header and/ or item level, you can define which date type you need for the transaction, that is, which item type you need. By doing this, you avoid saving unnecessary date types on the database. The same applies for durations (for example, contract run time).
To assign dates and durations to an item category, you group the desired date types and durations together in a date profile and assign this to a transaction type or an item type.
Link as http://help.sap.com/saphelpcrm50/helpdata/en/d4/fce93a29768802e10000000a11402f/frameset.htm_
Best Regards
Do keep me posted on this
Naveen.
Reward points if helpful

Similar Messages

Date Profile with Actions and Deadline Monitoring

Hi Folks ,
I have met an requirement of Actions with Deadline Monitoring of Date Profile . I could able to see Date profile with Day Rules in the standard , But i have met an requirement for very high imp - 2 hrs , High - 4 hrs .... etc. Where in Standard Date Profile i checked all the Date Rules which were in the XML format which describes about Day only.
I m looking for an XML code for Date - DDMMYY & Time Format - HHMMSS and which supports my requirement.
Would be very thankful if any could forward any step for Actions with Date profile with Time depandant.
Thank you
Regards,
Amrita

Hi Amrita,
You take the standard XML code for the date time and copy as per your requirement and give the duration and time unit. Then assign to the action profile and see the action is appearing in transaction.Then go to tcode CRMC_ACTION_JOB and execute that transaction from their. Then the date you want to trigger the mail it will trigger in that time.
Thanx
Chinmaya

How do I work with FK in a data profile?

Hello People:
I am new in OWB tools and I have many doubts. Therefore, I would like to know if anyone can guide me a bit with the theme of FK and profiles.
How do I work with FK in a data profile?
If I have a table that has a FK to most of the tables, because it is like a parent table. What should I do to have that FK in the profile?
e.g.
- Table 1 FK Table 2
- Table 1 FK Table 3
- Table 1 FK Table 4
- Table 1 FK Table 5
- Table 1 FK Table 6
- Table 2 FK Table 7
- Table 2 FK Table 8
- Table 8 FK Table 9
You should have a data profile with each table or a data profile for all related tables?
If I am all in a single profile, that it would have no problem but I would only slow every time that I have to add a new table, but if I got separated, I can not use the FK? What is the solution that will give this problem?
e.g. PROFILE GENERAL
- Table 1
- Table 2
- Table 3
- Table 4
- Table 5
- Table 6
- Table 7
- Table 8
- Table 9
OR
PROFILE 1 -> - Table 1
PROFILE 2 -> - Table 2
PROFILE 3 -> - Table 3
PROFILE 4 -> - Table 4
PROFILE 5 -> - Table 5
PROFILE 6 -> - Table 6
PROFILE 7 -> - Table 7
PROFILE 8 -> - Table 8
PROFILE 9 -> - Table 9
OR
PROFILE R -> Table 1 / Table 2
PROFILE S -> Table 1 / Table 3
PROFILE T -> Table 1 / Table 4
PROFILE U -> Table 1 / Table 5
PROFILE V -> Table 1 / Table 6
PROFILE W -> Table 2 / Table 7
PROFILE X -> Table 2 / Table 8
PROFILE Z -> Table 8 / Table 9
Thank you very much for your help!
Best regard!

Any idea, please?

Error ORA-14400 generated Data Profile

Hello People,
When I generated data profile with 5 tables:
Profile_1224766956846
INFORMATIONAL
Data profiling operations complete.
Profile_1224766956846
Error
ORA-14400: inserted partition key does not map to any partition
ORA-06512: at "OWBREP.WB_RT_PROFILE_SERVICE", line 1113
ORA-06512: at "OWBREP.WB_RT_PROFILE_SERVICE", line 1199
ORA-06512: at line 1
Profile_1224766956846
INFORMATIONAL
Referential analysis for objects.
Profile_1224766956846
INFORMATIONAL
Referential analysis initialization complete in 53.978 s.
Profile_1224766956846
INFORMATIONAL
Referential analysis initialization.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CONTRATO complete in 0.253 s.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Functional dependency and unique key discovery for object CONTRATO complete in 2.279 s.
Profile_1224766956846
INFORMATIONAL
Functional dependency and unique key discovery for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Domain analysis for object CONTRATO complete in 0.208 s.
Profile_1224766956846
INFORMATIONAL
Domain analysis for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Aggregation and Data Type analysis for object CONTRATO complete in 47.028 s.
Profile_1224766956846
INFORMATIONAL
Aggregation and Data Type analysis for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object IMPUESTO complete in 0.007 s.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object IMPUESTO
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CUENTA complete in 0.746 s.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CUENTA
Profile_1224766956846
INFORMATIONAL
Execute data prepare map for object CONTRATO complete in 1.747 s.
Profile_1224766956846
INFORMATIONAL
Execute data prepare map for object CONTRATO
  O59DC772DA581112EE044001A_MAP_ProfileLoader
Success
It only happens when I try to do a foreing key between CONTRATO -> CUENTA. I have chosen data type discovery, common format discovery, copy data in workspace, pattern discovery, domain discovery, unique key discovery, functional dependency, relationship discovery and data rule profiling in the property inspector.
Sometimes I am able to profile without any error, but sometimes I cannot. I am not able to identify the steps when the profiling works correctly.
I am using 10g R2 database and OWB repository 10.2.0.4
Thanks for your help!

ORA-14400:     inserted partition key does not map to any partition
Cause:     An attempt was made to insert a record into, a Range or Composite Range object, with a concatenated partition key that is beyond the concatenated partition bound list of the last partition -OR- An attempt was made to insert a record into a List object with a partition key that did not match the literal values specified for any of the partitions.
Action:     Do not insert the key. Or, add a partition capable of accepting the key, Or add values matching the key to a partition specification
Having a partition is not the issue. The table should have a partition with a high value (on the partition key) which is higher than the value you are trying to insert.
If you are partitioning by date and the last partition has a high value of 01-aug-2008 you will get this error if one of the rows you are inserting has the date 02-aug-2008.
also you might want to check:
[http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1392403659992]
Edited by: Darthvader-647181 on Oct 23, 2008 7:41 AM

Query on Date profile

Hi
I have a Date profile with Date types as
ToDo By
Billing Date
Billing Doc. Creation Date
Duedate alert level 1
Duedate alert level 2
Duedate alert level 3
Duration Until First Reaction
At transaction level, I am able to edit only 2nd and 3rd. However the other date types are greyed out. I have checked the date types and found for 2nd and 3rd, under date rules, "DETERMINE ONLY ONCE" check box is not activated. While for others, it is activated.
I then unchecked for other date type the same check box. still not able to see them in edit mode at transaction level. Please help me.
Regards,
Rajesh

Hi Rajesh,
If u want to make all u r date types editable then just assign Screen Areas: Dates to all u r date type, under same u'll see the fiels only display field just uncheck it for all u r datetypes, u'll see all u r date type becomes editable.
Regards,
DD's

Can I filter the table being profiled in the Data Profiling task, or know of a work around? SSIS2008r2

Hi,
I import several files into a staging table. Inside a foreach loop, after the data flow task I have a Data Profiling task that profiles the table so we can give feedback to those who sent us the file.
I just relalized that after the first loop, there is more than one file in the staging table, hence more than one file is being profiled.
At first glance it doesnt appear I can add a "Where" clause to the table. I do have a column that states which file the data came from, but with only being able to profile a view or table, I can't filter.
Anyone have any ideas?
Mike

Catching outliers seeing how much of what kind of data exist, deviations, distribution, you get some sort of a historgram in essence with the Data Profiling.
It is normally a preamble to doing data ingress (or egress) into a new target.
Now patterns are in Fuzzy Lookups/matching or grouping. Having RegEx used is hard in SSIS! I admit, I proposed to have it included into SSIS VNext. I remember there was a component or two on CodePlex:
http://ssisctc.codeplex.com/ see if any makes sense, I recall I tried one just out for fun.
Arthur My Blog

Date profile 000000000002 - behvaiour in Task

Hi,
We are using task and inside we are using standrad date profile 000000000002(Activity: Planned / Actual)
In this date profile, we are having three durations
A_ACTTOTAL     Activity: Actual Total Duration
A_FACE2FACE     Interaction: Actual Dur. Face-to-Face
A_PLANTOTAL     Activity: Planned Total Duration
I just want to understand how system is calculating A_PLANTOTAL(Activity: Planned Total Duration)
Ex: When I create TASK with start date as 02/10/2012 and end date as 02/11/2012, automatically Iam seeing 1440 minute as planned duration in the dates assignment block.
from where system is calculating this 1440 minute. pl suggest.
Regarsd
A.Sureshbabu.

The logic is writen in function module CRM_DATES_ORDERPLANNED_TR.
Set the debugger and check the calculation process.
Best regards.

Tasks - Organizational data profile

Hi all,
I face the following problem: I use the same Organizational data profile for Activities and Tasks (both for scenario Sales). For activities, the profile works alright but for tasks, the profile does not return any results. Also the rule that is used in the profile works alright - I tested it both in customizing and in the transaction with activities. Only problem are the tasks...
Any ideas?
Thanks,
Sebastian

Hi,
If its an IDES and its asking for requests, there should be a basis setting change.
Goto SCC4 and check for you logical system teh radio button:
'Automatic Recording of Changes' is selected.
If this is the case, ask you BASIS person to set it back to 'Changes Without Automatic recording'. This should be the IDES settings,
Kindly reward with points in case helpful
Sharif

How Long Does SSIS Data Profiling Task Take?

Greetings All,
I have been doing all my data cleansing and conforming manually (was unaware of tools available to me). I am testing the SSIS Data Profiling Task on a table with 60,000 records. The Data Profiling Task has taken over an hour and is still
not finished.
My questions are these:
How long does it generally take for this task to run?
What drives execution time for this task?
What is this object doing behind the scenes?
Are there faster tools out there for data profiling?
Best Regards,

It depends on how much data you have in table and how many profiles you have selected for inspection.
Behind scene, it uses TempDB to create temp tables and use it further for profiling.
Below tools are available which are simillar to SSIS Data Profiling:
DataCleaner
DataMartist
-Vaibhav Chaudhari

Problem in IP10 with the date of the task list

Hello all!!!!!
I have a problem when I'm duplicating a task list. I can duplicate the task list correctly, then i assign it to a generated maintance plan ( I'm only changing the plnal field because i'm changing the center of the task list). Then I go to IP10 to generate new scheduling entries for the new center, but i have a problem because all the dates ara calculated based on today (I'm making start in cycle for the first openening entry). I think taht the problem is some date of the task list because if I try to make the same operation with the old task list all it's ok (generate the new order).
Anyone has any idea?
Thanks a lot in advance and sorry for my poor english. If you need more information don't hesitate to ask.
Thanks again
Miquel

This forum is for SQL and PL/SQL related questions.
You should ask in an Applications forum.
Anyway, see these Metalink/My Oracle Support docs:
Re: Invalid objects after installing CU2 patch

I want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these

i want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these
IF I CREATE SERVICE ORG WITH SERVICE SCENARIO ORG DATA PROFILE,
MY PRICING IS NOT GETTING DETERMINED AS IT IS LINKED TO SALES ORG AND DISTRIBUTION CHANNEL THROUGH PRICING DETERMINATION SO HOW TO DO THE CUSTOMIZATION FOR THIS SITUATION
WITH REGARDS,
SATHISH

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

No profile with entry tool for task list QP01

Hi all,
I am trying to upload Inspection Plan through LSMW. When I reach the Create batch Input step, I encounter an error saying No profile with entry tool for task list Q 141 2 in session 5_INSP_PLAN. How do I fix this?
Please help

Solution is to check on config for Inspection Planning for QM.
SPRO > QM > Quality Planning > Inspection Planning > Maintain Profile for Default Values (OQ84)
Entry tool must be checked and Profile field in LSMW must correspond with Inspection Plan Profile

Issue with date profile

Dear All,
I have one issue related to date profile which is like this,i have created a date profile and i have assigned this date profile to both Tansaction type & Item category of TA(standard order).
But the assigned date profile(date rules) is not seen in the header tab of TA transaction when i tried to create it.
please advice..
I need to resolve this asap.
Points will be rewarded.
Thanks in advance./.....
Cheers
Shashidhar
Edited by: shashidhar prahaladh on Mar 12, 2008 5:29 AM

Hi Sashi,
Just a suggestion,as you have assigned to both transaction types and item category, so may be after entering the item in the transaction, you might be able to see the dates at header.
Please read below which is source from SAP Help.
For every transaction at the header and/ or item level, you can define which date type you need for the transaction, that is, which item type you need. By doing this, you avoid saving unnecessary date types on the database. The same applies for durations (for example, contract run time).
To assign dates and durations to an item category, you group the desired date types and durations together in a date profile and assign this to a transaction type or an item type.
Link as http://help.sap.com/saphelp_crm50/helpdata/en/d4/fce93a29768802e10000000a11402f/frameset.htm
If useful please reward points
Thanks
Srini

Velocity profiling with SoftMotion Module

Hi Folk,
I need to move a stepper motor following a velocity profile, i.e. I need to change continuously the velocity while motion is in progress.
I intend to perform the move with a cRIO platform equipped with a NI 9512 module.
By using the property & invoke nodes, introduced first in NI SoftMotion Module 2009 SP1, I have created a small test routine to perform my task.
I have used the property & invoke nodes, instead of the function blocks, because I want to update the velocity profile as fast as possible.
For the test routine I have used a simulated axis (a servo motor) and the routine is developed by using the scan interface.
In the main loop, a sinusoidal wave (point by point) generates a sample velocity profile, the velocity is passed to the "velocity" Straigth-Line Move property node and it is applied to the axis by the "Start" Straigth-Line Move invoke node.
The test routine runs circa correctly until the velocity profile cross the zero, at that time the routine stops with the following Error -77070.
I have added an offset to the generated sinusoidal profile. The test routine runs correctly if the offset sets the sinusoidal profile all positive or all negative, i.e. the offset is greater than sinusoidal amplitude.
Question (1)
I beleave that this behavior is due to a bug in the Straigth-Line Move node. I am right?
Question (2)
I have written that the routine runs "circa" correctly because furthermore the previous bug there is a timing issue.
I have set the Scan Period = 5 ms as it is requested for 951x modules.
If the timed loop (Synchronize to Scan Engine) is set to 5 scans or more the timing of the timed loop seems to be correct (the sinusoidal wave shows the period that has been configured).
If the timed loop is set to 4 scans or less the timing of the timed loop becomes longer (the sinusoidal wave shows a longer period as that has been configured).
Any idea about this timing issue?
Question (3)
Any suggestion how to write a faster velocity profiling with the SoftMotion Module?
Thanks for your help,
Asper
P.S.
Error -77070 occurred at Invoke Node in Axis_Velocity_profiling.vi
Possible reason(s):
NI SoftMotion: A Start operation is pending. Please add a delay between consecutive preemptive Start Motion calls.
Attachments:
velocity_profile_exemple.zip ‏77 KB

Hi Reid,
I am developing a system for low-force tests of very thin tissues in tension and fatigue.
The force is measured with a load cell and is applied by pulling the sample with a linear translation stage and the elongation is measured with a linear encoder.
The linear stage is motorized with a 2-phase-stepper motor, and with two limit switches. The stepper is designed for applications with very limited space conditions and the motor is hollow.
The linear encoder has a 20 nm resolution and a 1 um accuracy, and includes an electronic for signal conditioning that is compliant with the encoder input of the NI 9512 module.
The load cell is a full bridge with an accuracy better than 0.01 %. For acquiring and conditioning the full bridge, the system uses a NI 9237.
The system will provide tests that are controlled both in force and in elongation.
For the tests controlled in force, the loop is closed with the signal measured by the load cell and the translation stage is driven in velocity.
For the tests controlled in elongation, the loop is closed with the encoder signal and the translation stage is driven in position.
For both type of tests, the user can select different test profiles, for example: a linear increasing, a sinusoidal profile for fatigue test, etc.
The user can pause the test at any time, and the system must take the condition, until the next proceed command.
My previous post: question (1)
Your reply:
I ran the code Axis Override Test 1 on my machine on a simulated Axis and this was the performance I observed:
Our versions maybe differing did you see the same behavior on a simulated axis?
Concerning the velocity that is read from the Read (Data) function block, I observe the following:
With a simulated axis (both in My computer and in cRIO-9073) the values are positive for forward move and they are negative for backward move (as you also have observed).
With the real axis (NI 9512) the values are positive both for forward move and backward move.
Please see the next images.
With simulated axis
With real axis (NI 9512)
My system is as follows:
   LabVIEW: 9.0f3
   SoftMotion: 9.0.1
   NI-Motion: 8.1.0.3037
   NI-RIO: 3.3.1
   NI-RT: 9.0.0
I want to point out that the simulated-axis is a servo drive while the real axis is a stepper drive (NI 9512).
With my software release, I believe that this behavior is due to a bug, probably in the stepper drive interface. I am right?
I suggest that you try on a real stepper axis (NI 9512).
My previous post: question (2)
Your reply:
These two questions I feel share the same root cause. It takes a little bit longer to calculate the a preemptive move in the opposite direction.
Considering the observation on the Read (Data) function block issue, now I note that my second question arises from the sum of two different behaviors. In case the Read (Data) function block issue is solved, as for simulated axis, the sentence can be rewritten as:
The velocity plot shows some computation troubles as the velocity is approaching the zero, with the derivative both positive and negative.
Furthermore I have discovered that this computation troubles gives a blocking error if the velocity is approaching the zero with a zero derivative.
Once the velocity reaches the zero with a zero derivative, the "Velocity Override" Write is no any more able to change the velocity!
No errors or warnings comes out in this situation!
This behavior is true with an axis both real and simulated, and is still true both with an all function blocks code and a mixed function blocks/invoke nodes code.
From this point of view, the velocity troubles with the approaching to zero are very very bad!
Please consider that in the previous posted example you can find an all function blocks code, Axis Velocity Override_test_0.vi, and a mixed function blocks/invoke nodes code, Axis Velocity Override_test_1.vi.
You can easily test the velocity blocking error by putting the parameter offset = amplitude in the previous posted example.
My previous post: question (3)
Your reply:
I am curious if you are observing that around zero % the override function performs poorly, was this present on the function block example? I think the problem here is the preemptive move being called from the straightline move function. Basically, the trajectory generator is still calculating points when send the command to it. Since we are updating the velocity at a very fast interval we notice some of this breakup due to the longer latancy times. Even with this
Error -70216 occurred at an unidentified location
Possible reason(s):
Motion: A required resource is busy and unable to accept further commands at this time.
To get around this error you will need to call into the trajectory generator at a slower period of time to allow it to finish the operation in progress. Keep in mind the control loop we are calling into in RT is the command loop to the trajectory generator and the position control loop is performed on the FPGA of the module itself.
I want to underline that the computation troubles as the velocity is approaching the zero has not apparent connection with the Error -70216.
I have tested the posted routines with Scan Period = 5 ms and the Number of Scans = 5 or more (25 ms for cycle or more) and the computation trouble is still there every time that the velocity is approaching the zero.
The Error -70216 come out randomly and increases as the cycle time decreases.
I did not observe any decay in the time to perform the Velocity Override around zero %, but you have to consider that I did not make any test to investigate this issue.
I agree with you, the Error -70216 can arise from some commands that try to access the same resource a the same time.
In my opinion the Velocity Override has to be predominant, i.e. no matter what the routine is actually doing, the routine should start immediately to correct the actual velocity to reach the new value.
Suggestion: for the future release of the Velocity Override, please consider to leave the opportunity to select from percentage velocity (as it is now) an absolute velocity.
Regards,
Asper

Date Profile

Hi there SAP Gurus.
I'm trying to set a data type that let me copy another one.
Quite easy. I've done it before. I have to work with data rules.
But today the task is different.
I do not create a sales order in CRM. I create a sales order in R3 and, at saving, I transfer it to CRM.
In R3 I run availability check and I get a proposal for the delivery.
Good.
In CRM usually I find the data into field "first requested delivery date" at item level. I find it as well.
Now what I have to do is to copy the data I receive from R3 into another data field and the make some calculations.
Aside from the specific calculations what I am not able to do is to copy the data into the field.
It seems that, since the document is created into R3, the system does not consider the value and the data rule linked to the data type I created does not copy the value. This happen also when I copy the SO document in CRM to a new SO. The field of the delivery date is copied but the other data field which should copy the delivery date does not copy anything.
Any ideas?
Thank you.

HI,
Yes
SCAPPTSEG.
For the date profile values you may need to do the following join..
CRMD_LINK-GUID_SET = SCAPPTSEG-APPL_GUID.
Regards,
Satish Mathala

Date Profile with Tasks

Similar Messages

Maybe you are looking for