Date rule for current date

Hi.
I have a date type for which I would like to fill DATE FROM field with current date, but the field DATE TO should stay empty for manual entry.
I defined the following rule which I assigned to my date type but the problem with this rule is that it fills both fields (date from and date to) with current date.
<?xml version="1.0"?>
<TimeRule>
   <TimeRuleSource>
      <ruleline>
         <AssignTimeExp displaytype="AssignTime">
            <VarTimeExp displayType="VarTime"
                        name="RESULT"
                        position="F">
            </VarTimeExp>
            <ConstLocTimeExp displaytype="ConstLocTime"
                          date="now"
                          time="000000"
                          timeunit="DAY">
               <VarObjectExp displaytype="VarObject" name="SYSTEM"/>
            </ConstLocTimeExp>
         </AssignTimeExp>
      </ruleline>
   </TimeRuleSource>
</TimeRule>

solved by other way

Similar Messages

Dynamic Date Calculation for Current Date - 1

I am trying to create a variant with a dynamic date calculation attribute.
I am following the instructions as they are posted to the web but I get an error message.
I want to get all data EQ to the current date -1
In the object for selection screen I enter a D for Selection Variable, for Name of Variable I enter an I to include specific values and the option EQ for current date +/- ??? days. Then I enter 1- for the number of days. I have tried to enter this many times and in many ways but it doesn't work. I keep getting this message "lower limit of interval is greater than upper limit"

Hi,
Welcome to SDN.
Selection-screen has four values -
SIGN
OPTION
LOW
HIGH
Pass your date value in the option low for the screen.
Sign you have already pass as I and option as EQ.
Regard,
Amit
Reward all helpful replies.
Can you paste your code here.
Message was edited by:
Amit Khare

CUIC 9.1.1 Report scheduling issue - getting data only for current date

Hi,
CUIC : 9.1.1
ICM: 9.0.3
Description:We have CUIC publisher and Subscriber deployed in Cisco UCS C series server. When we schedule a report in Subscriber, we are getting data of current date even we schedule for old dates. Eg. If I schedule a report for yesterday, getting output as today's data. This is applicable for all the historical reports.
There is no such issue in Publisher.
Regards,
Alag

Try this...
{TableName.DateField} < DateAdd("d", -2, CurrentDate)
HTH,
Jason

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

What are the two different rules for organizational data determination

What are the two different rules for organizational data determination???

Hi
1) Rule type Responsibilities
want to determine organizational data for individual responsibilities
have not created an organizational model but want to create one
have a lot of organizational units and must only assign a few attributes
2) Rule type Organizational Model
You would use rule resolution using organizational model if you
have created an organizational model or have distributed a plan to SAP CRM and also want to use this for determining organizational data
assign a lot of attributes to the organizational units and these are to be evaluated
Regards
Manohar

Create a formula variable using replacement path for current date

Hi All,
I created a formula variable using replacement path for current date.
But when i used this variable am getting an error message saying .
" This Variable cannot be used in this query".
Could you please let me know the reason?
Thanks,
Zehra

Hi All,
Thanks for all your help...
I just found a solution via the below link
in Bex Formula variabel, Current calander day(sap exit) missing.
Here he is trying to use the existing formula variable.
My doubt here is, Even i could not find this varaible in BEX formula variable, But could see this in BI Content path as mentioned in the above link. DO i have to transport this varaible , or i simply can activate it in production?
I just could find this in BI Content but not in MetaData Repository.
Thanks,
Zehra

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Can't get access in Time Machine to certain folders for any date earlier than current date/time.

Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon? Here's a picture of the dilemma:
I've tried monkeying with priveleges using Command I, and changing users, but to no avail. Can anyone help?

Right. Here's what the permissions look like from the Finder Command I:
I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account as Admin (dunc...mpster) I get the same result.

Error In Backdated Reservation Creation Base date earlier than current dat

Dear Experts,
Error while creating Reservation for back date.
Base date earlier than Current date.
Can we create backdated reservation ? and post goods issue to the same ?
if it need configuration please explain the steps for allowing creation of backdated reservations.
Thanks in Advance

What is the error message nos.?

After updating new MIC in QP02 in Back date not showing current date ?

Hi Guru,
I have updated some new MIC and some Changes are made in existing MIC in QP02 on back date. It is showing on same back date with all correction and new MIC but on today's date i.e. current date it is not showing in the system.
any can help me how to get in current date ?
There are some dump error , for these correction i have updated SNOTE 1467234 and 1471534 in Quality server, but no more effect.
Thanks,
Piyush Patel

hi,Premji,
I have updated existing QP in back date i.e. same as when created original date ( expiration date is long i.e. 31.12.9999) , then same thing i wanted to see all updated MIC should be reflect in current date, but it is not coming, so i have updated SNOTE- 1467234 and 1471534 then tried it.It is working fine some how but not as i want.Hence i thing it is solved my problem.
Thanks to you and Mr. Craig for your more suggestion/guidance.
Piyush Patel

Last month end date based on current date

Hi,
How to show last month end date based on the current date.
Eg:
Current date = "08/26/09"
Var- Last Month End Date = "07/31/09" etc...,
Please help me how to get it...
Thank You!

Good to hear that it worked for you. but not for me.
I tried like this:
1st::
1. var1= ToDate("06/30/09","MM/dd/yyyy")
2.Var2= RelativeDate([Var1];-DayNumberOfMonth([Var1]))
result: 5/30/09
2nd:
RelativeDate('6/30/2009';-DayNumberOfMonth('6/30/2009'))
result: 5/30/09
Am working on SAP OLAP cubes.
Please help me where am going wrong....
Thank You!

FM to get previous sunday date based on current date(SY-DATUM)

hi all,
Is there any function module to get the previous sunday date based on current date(sy-datum)?
Regards,
Kapil Sharma

Hi Kapil,
You can follow the logic below:
data:
l_date like sy-datum, **TODAY
l_date2 like sy-datum, **Previous Sunday
data:
l_daynr like HRVSCHED-DAYNR.
*Get today's date
l_date = sy-datum.
*Gey today's day (Monday, Tuesday, etc.)
CALL FUNCTION 'HRIQ_GET_DATE_DAYNAME'
EXPORTING
langu = 'EN'
date = l_date
IMPORTING
daynr = l_daynr.
CASE l_daynr.
*If it is Monday
WHEN 1.
-Subtract 2 days for the previous Sunday
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 2
IMPORTING
ed_date = l_date2.
*If it is Tuesday
WHEN 2.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 3
IMPORTING
ed_date = l_date2.
*If it is Wednesday
WHEN 3.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 4
IMPORTING
ed_date = l_date2.
*If it is Thursday
WHEN 4.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 5
IMPORTING
ed_date = l_date2.
*If it is Friday
WHEN 5.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 6
IMPORTING
ed_date = l_date2.
*If it is Saturday
WHEN 6.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 7
IMPORTING
ed_date = l_date2.
*If it is Sunday
WHEN 7.
CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
EXPORTING
id_date = l_date
id-operator = '-'
is_duration = 8
IMPORTING
ed_date = l_date2.
ENDCASE.
Regards,
Dilek

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Data Type field read only in Data source for transaction data (PC_FILE)

Hi folks,
I need to change Data Type for some of the fields in "Field" tab in data source for transactional data. It became read only after I activate the data source. Need help in making it editable. All fields now have Data type=CHAR.
Thanks

Nevermind folks. I got it.

Date range for key date in hierarchy

Dear Friends,
Is there a work around for single key date restriction for time dependent hierarchy.Bcos i can only select one key date in teh report for my hierarchy so that it will take that hierarchy which falls in this date and display the result accordingly.
But is there a way to select the date range for key date so that more than one hierarchy can be used to display my report accrding to the time range.
Say,i have 4 hierarchies (time dependent) like v1,v2,v3,v4 and v5 for jan 08,feb 08,mar 08,apr 08 & may 08 respectively.
In my report,i want to display the result for the time interval say mar to May.
So my report should diplay the result according to the 3 different hierarchies for the time period i.e.v3,v4&v5.
How do i acheive this.
Thanks.
ragu

Hi
I think we may do with the Char with text with replecement path.
take time char as Calmonth and set the offet value as -1 and -2 and design the report and use the hierarchies in that query.
Am not surt it willwork but better to try with this.

Date rule for current date

Similar Messages

Maybe you are looking for