DB didn't come up along with crs after node reboot
Grid Version: 11.2.0.3
OS: Red Hat Enterprise Linux 5.6
Node2 of our two node RAC got rebooted. Upon reboot, CRS and ASM instance came up. But the DB didn't come up.
How can I check if DB is linked to CRS startup ?
How can I enable DB startup upon CRS startup ?
Hi,
Check Alert log of Database Instance on that node.
By default if Oracle Database Instance already is started in one node, CRS automaticaly start Database Instance automatically on others nodes.
But if you issue "srvctl stop instance" before shutdown of node the state of this resource will be "shutdown" (i.e stay down) CRS database resource have by default the attribute AUTO_START=restore, which means Oracle CRSD will remember last state of that resource.
In this case you must manually issuing "srvctl start instance" after startup of clusterware, but if database instance was running and you issued "crctl stop crs", crsd must start database automatically at clusterware start.
Similar Messages
-
When I open my MacBook Air the keyboard comes up along with the screen and does not stay still?!
When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.
Yes. Take the computer to the Apple store to have it fixed.
Best -
[solved] sshd comes back to port 22 after a reboot whatever the config
Hi all,
I'm a bit confused, I'vre tried to change sshd port (from 22 to 1022)
restarting sshd was ok, sshd started using port 1022.
but after a reboot, sshd goes back using port 22... I can't see anything in the journalctl logs regarding sshd failing to setup on the 1022 port..
my sshd_config file:
# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
RSAAuthentication no
PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
AllowUsers kamou
Port 1022
any help would be greatly appreciated.
Cheers,
kamou
Last edited by kamou (2014-10-05 22:53:17)seems like you'r right,
sshd.socket is active:
sshd.socket loaded active listening sshd.socket
I've changed the ListenStream Parameter and now it woks fine.
thanks a lot.
kamou -
How to add a second database along with existing two node RAC environment
Hi,
I was wondering if anyone can help me with this.
My Environment:
1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
3. Database is up and running, but I am not able to connect it from any client.
4. I am getting ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
5. Database (test2) is registered with grid LISTENER
5. TNSPING from client machine response is ok
Am I missing something here, happy to provide more info if requested.
Thanks,
PSC:\Users\root.test_prod>lsnrctl
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Start Date 18-FEB-2012 19:51:47
Uptime 4 days 16 hr. 6 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1322 refused:0 state:ready
LOCAL SERVER
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
The command completed successfully
LSNRCTL> -
Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot
Hello everybody,
Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points.
I found two work arounds but I don't know how to fix the issue completely.
1. Remove usb adapter and plug it in again (it causes arc4 module to load), then restart networking.
2. rmmod p54usb, rmmod p54common, modprobe arc4, modprobe p54usb and after that restart networking.
Could anybody help to fix the problem generally?
$ lsusb
0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
$ uname -a
Linux arch 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 08:11:41 UTC 2012 i686 Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz GenuineIntel GNU/Linux
StasDoes the p54common get loaded again as well when you do modprobep54usb?
If not, you might just put that into modprobe.conf blacklist.
If it does get loaded as well, there might be another wireless module getting loaded that perhaps does cause problems. You can check that with
mkinitcpio -v
now, or with lsmod after a reboot before your workaround. -
Synced bookmarks to new computer but thumbnail icons didn't come along.
I synced my bookmarks to a new computer but the little identifying thumbnail icons didn't come along. So now there is just a generic empty box next to each until I click on the bookmark, at which point it refreshes with the proper icon. Is there a way to get them all to refresh without having to visit each site? Thanks much.
Try using this addon [https://addons.mozilla.org/en-US/firefox/addon/faviconreloader/ here]. It refreshes favicons (The little identifying thumbnail icons) by using your bookmarks.
Reply if this hasn't helped. -
Can I return my iPad in the states if I bought it at an apple store in the UAE because I wasn't aware it didn't come with FaceTime at the time?
Your only option is to sell the iPad and buy a new one.
Apple Reuse and Recycle Program
http://store.apple.com/us/browse/reuse_and_recycle
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
Cheers, Tom -
I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.
What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points -
I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?
If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
(113079) -
I just bought my MacBook Pro on Sunday from Virgin Megastores and it didn't come with iLife and I did my research and it says that it should have come with it! What should I do? Should I take it back and tell them that it didn't come with it? Because now it's making me pay for each of them and they're really expensive!
If Virgin promised to include what used to be the iLife apps, they should have given you a code which you then enter in the App Store to download and install the apps free of charge. So, you might want to contact them again, indeed.
-
I bought a used MacBook Pro and didn't come with an install disc.
I recently purchased a used MacBook Pro, it is the 2006 15.4inch, with 1.83GHz Intel core duo processor. It didn't come with RAM, a charger or the instal disc and the battery was dead. I installed RAM, bought a battery and charger and it booted up no problem, but I can't get past the login because I don't know the previous owners password. How do I get passed this point so? What OSX do I buy?
In the mean time try this: Run Mac Setup Assistant -
Restart the machine with the Command and S keys held down, and type the following commands into the prompt in order:
mount -uw /
mv /var/db/netinfo/local.nidb /var/db/netinfo/local.nidb.old
mv /var/db/.AppleSetupDone /var/db/.AppleSetupDone.old
usr/libexec/create_nidb
shutdown -h now
The Setup Assistant will reappear the next time your computer is turned on. Be sure to enter the commands properly. You will be able to setup your user name password, etc. You can then delete the previous owners User. -
Can I add a sub woofer to my dv7-1245dx if it didn't come with one
I know this laptop is old, about 5-6 years old or so. I have blown one of the speakers in it, and am going to replace it, even though they sound horrible when working, it's better than 1 crackling while you try to watch a movie or something. Since I have to rip the laptop apart for this and another reason, I looked up the woofer that I know was an option for the dv7's, and I have found some I can buy. I am wondering though, since mine didn't come with one, is it just a matter of adding the woofer, or maybe there is no connection to hook it up? Doesn't make much sense to buy one if there is no connector to hook it up to. I know I have room for it, there is a round plastic spacer/cup thing on the bottom of the laptop where the speaker should be pointing out, I just don't know (yet) if there will be a connection for it on my motherboard.
Forgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
If I have an iphone that didn't come with icloud, is there a way to get icloud on it so I can use it with my ipad 4? I think my iphone is a 3g, not sure.
Do I have to have iTunes on my PC in order to update my iPhone. I'd rather not have my computer linked with my iPad and phone. I'd like to just keep it between iPad and iPhone. I don't have a computer of my own.
-
I keep getting error 586 in the console along with the following:
3/18/12 7:55:19 PM com.apple.launchd[1] (org.samba.smbd) Throttling respawn: Will start in 10 seconds 3/18/12 7:55:29 PM com.apple.launchd[1] (org.samba.smbd[1246]) Exited with exit code:
The console shows thousands of these error messages and it's messed up many functions of my MacBook.
I have VMFusion on my Mac because for work I need to use Windows. Last night I tried installing Windows 7 but could not complete installation. I got a message saying "can not locate driver". Then I started getting the Error 586.
Today I unistalled VMFusion hoping that would resolve the Error 586. No such luck.
Can anyone help me get rid of this constant error, plesase?I believe this has something to do with Mail. Are these frequently occurring errors? If so and you quit Mail do the errors cease?
Google searching for "org.postfix.master" reveals quite a number of links that you might check for more information. -
I downloaded the latest operating system (iO5) to my iphone4. The problem is first off I had to download the YouTube App because it didn't come with it like my previous operating system (*****!). Then, the problem is this Google YouTube App won't let me 'save to favorites' my favorite tae kwon do videos. I get an error message saying error saving to favorites. Help! Thank-you!
See this previous discussion:
Error adding file to favorites on iPod...: Apple Support Communities
Maybe you are looking for
-
Using the correct charger for hp dv6? 90 or 120w?? which one? help!
Hi guys, currently im using a charger from my hp dv6-6153sa, but i need to cut this story short so you understand. First of i changed the motherboard in this laptop, the motherboard is from the hp pavilion dv6-6198sp however the battery is from a hp
-
Hi all. I've used "xset m 4 0" to set the mouse speed to something usable, but it's still too slow when I move the trackpoint slowly (before acceleration kicks in, that is). Is there any way of increasing the slowest speed of the mouse? It seems stra
-
I have a need to update the property of a class given its name. I have found that if I used the notation : obj["name"] = "hello world!" that this does not update the property 'name' of sealed class instance 'obj'. To be more explicit, suppose I have
-
Do you know where the error message is coming from? All the set ups looks fine. Do you think I should reset everything and start from scratch? Cheers, JB
-
When I add a video to my timeline, it only allows the audio, not the video. It is in MOV format.
I am working on my first project with Elements Premiere, and when I add a video from my computer, it will only add it to the audio, not the movie section. All of my files are in MOV format. I am able to open the same file in Microsoft Movie Maker, ju