DB13 problem
Hi all,
I have configured Tivoli 5.5 with SAP ECC6 . I am able to take backup using Brtools at command lavel. But when i am trying to take backup using DB13 than i am getting an error.
*BKI5014E: Tivoli Storage Manager Error:*
*ANS0220E (RC400) An invalid option was found during option parsing.*
BKI0405I: TDP waited 0 sec. for BRBACKUP in util_file_online communication.
BKI0020I: End of program at: Fri Feb 27 11:32:10 IST 2009 .
BKI0021I: Elapsed time: 00 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2009-02-27 11.32.10
BR0279E Return code from '/usr/sap/QAS/SYS/exe/run/backint -u QAS -f backup --i /oracle/QAS/sapbackup/.beaafhie.lst -t file_online -p /oracle/QAS/102_64/dbs/initQAS.utl -c': 2i
BR0232E 0 of 12 files saved by backup utility
BR0280I BRBACKUP time stamp: 2009-02-27 11.32.10
Thanks & Regards
Rudra
Hi,
thanks for reply.
When i execute the command given by you than i got the following o/p
tegaqas:oraqas 1> backint -p /oracle/QAS/102_64/dbs/initQAS.utl -f password
Data Protection for SAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 5, Release 5, Modification 0.0 for AIX LF 64-bit -
Build: 316B compiled on Oct 23 2007
(c) Copyright IBM Corporation, 1996, 2007, All Rights Reserved.
BKI5014E: Tivoli Storage Manager Error:
ANS0220E (RC400) An invalid option was found during option parsing.
BKI0020I: End of program at: Mon Mar 2 10:34:14 IST 2009 .
BKI0021I: Elapsed time: 00 sec .
BKI0024I: Return code is: 2.
The owner & permission of backint & backfm is
lrwxrwxrwx 1 root system 35 Feb 21 15:47 backfm -> /usr/tivoli/tsm/tdp_r3/ora64/backfm
lrwxrwxrwx 1 root system 36 Feb 21 15:47 backint -> /usr/tivoli/tsm/tdp_r3/ora64/backint
My dsm.opt file is
# more dsm.opt
SErvername tegatsm
Tapeprompt No
DOM /usr/sap /sapmnt/C11 /usr/sap/trans /oracle/C11
my dsm.sys file is
# more dsm.sys
SErvername tegatsm
COMMmethod TCPip
TCPPort 1500
TCPServeraddress 192.168.70.24
TCPBuffsize 32
TCPWindowsize 24
Compression Off
InclExcl /usr/lpp/adsm/bin/inclexcl.list
Thanks & Regards
Rudra
Similar Messages
-
DB13 problems after system copy
Dear support,
I have done system copy and followed post installation steps but i am not able to execute any job through DB13 even after setting ops$ mechanism.
i get below job logs for any action started from DB13
Job started
Step 001 started (program RSDBAJOB, variant &0000000000002, user name SAP*)
Execute log. command SAPDBA on host cssl-020
__Parameters: -u / -checkopt PSAP% -method E
External program terminated with exit code 128
SAPDBA returned error status E
Job finished
changes i made:
I have deleted all ops$PRD users and created new ones as below for DEV
DROP USER OPS$PRDADM CASCADE;
create user OPS$DEVADM default tablespace psapuser1d
temporary tablespace psaptemp identified externally;
GRANT CONNECT, RESOURCE TO "OPS$DEVADM";
DROP TABLE "OPS$PRDADM".SAPUSER;
CREATE TABLE "OPS$DEVADM".SAPUSER
(USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$DEVADM".SAPUSER VALUES ('SAPR3','sap');
alter user SAPR3 identified by sap;
what else i should perform after this to get through , i have folllowed these steps from sap standard note.
<b>Please let me know procedure in detail.</b>
Best Regards,
AjitRHi Ajit,
I beleive you made a copy form PRD to DEV system.
Seems you missed out on creating OPS$ORADEV user.Execute the below steps again.
sqlplus "/ as sysdba"
shutdown
startup open
drop table ops$prdadm.sapuser;
drop table ops$prdadm.cascade;
drop table ops$oraprd.sapuser;
drop table ops$oraprd.cascade;
Now Setup OPS$CONNECT for ORADEV(with default password for sapr3)
CREATE USER OPS$ORADEV IDENTIFIED EXTERNALLY DEFAULT TABLESPACE PSAPUSER1D TEMPORARY TABLESPACE PSAPTEMP;
GRANT CONNECT,RESOURCE,DBA TO OPS$ORADEV WITH ADMIN OPTION;
CREATE TABLE "OPS$DEVADM".SAPUSER (USERID VARCHAR2(256),PASSWD VARCHAR2(256):
INSERT INTO "OPS$DEVADM".SAPUSER VALUES ( 'sapr3', 'sap');
<b>Now Setup OPS$CONNECT for DEVADM</b>
CREATE USER OPS$DEVADM IDENTIFIED EXTERNALLY DEFAULT TABLESPACE PSAPUSER1D TEMPORARY TABLESPACE PSAPTEMP;
GRANT CONNECT,RESOURCE,DBA TO OPS$DEVADM WITH ADMIN OPTION;
COMMIT WORK;
EXIT
<b>Change the password of szstem/sapr3 to default</b>
brconnect -u / -p initDEV.sap -1 D -f chpass -o system -p manager
continue(press c)
brconnect -u / -p initDEV.sap -1 D -f chpass -o sapr3 -p manager
you need to initialise ops$ for sap connection
also start the DB in archive log mode and later remove the obsolete redo logs from oraarch .Check if your listener is up and running
**Reward points accrodingly
Junaid -
Hi,
After kernel upgrade we tried to take offline backup through DB13, before going with the SAP upgrade.
But, Now we are facing backup problem through DB13 while initializing the tape.
OS: Windows 2003
DB: Oracle 10.2.0.2
Kernel Release : 46D
Kernel Version: 46D_EX2 Path level: 2571
Machine: IA64
Log:
Job started
Step 001 started (program RSDBAJOB, variant &0000000004646, user name ZADMIN1)
Execute logical command BRBACKUP On host AP-CHE-SAP-02
Parameters: -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (13)
BR0055I Start of database backup: behjlsyp.tib 2011-12-06 11.37.43
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: behjlsyp
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/nmt0
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/nmt0 will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2011-12-06 11.37.43
BR0226I Rewinding tape volume in device /dev/mt0 ...
BR0278E Command output of 'mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind':
mt: opening '/dev/mt0': The system cannot find the file specified.
mt: opening '/dev/mt0': The system cannot find the file specified.
mt: opening '/dev/mt0': The system cannot find the file specified.
BR0280I BRBACKUP time stamp: 2011-12-06 11.37.43
BR0279E Return code from 'mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind':1
BR0213E Winding tape volume in device /dev/nmt0 failed
BR0219E Initialization of volume SCRATCH in device /dev/nmt0 failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2011-12-06 11.37.43
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Note: We tried NT Level Backup, it was successfully.
Please help us to resolve the issue.
Regards,
BharathiDear Deepak Kori,
Thanks, I pasted the init file for your reference. Seems to be correct.
init<SID>.sap:
address of backup device without rewind
[<dev_address> | (<dev_address_list>)]
no default
operating system dependent, examples:
HP-UX: /dev/rmt/0mn
OSF1: /dev/nrmt0h
AIX: /dev/rmt0.1
SINIX: /dev/ios0/rstape005n
SUN: /dev/rmt/0mn
NT: /dev/nmt0
tape_address = /dev/nmt0
address of backup device without rewind used by brarchive
default: value of the tape_address parameter
operating system dependent
tape_address_arch = /dev/nmt0
address of backup device with rewind
[<dev_address> | (<dev_address_list>)]
no default
operating system dependent, examples:
HP-UX: /dev/rmt/0m
OSF1: /dev/rmt0h
AIX: /dev/rmt0
SINIX: /dev/ios0/rstape005
SUN: /dev/rmt/0m
NT: /dev/mt0
tape_address_rew = /dev/mt0
Even also the same problem occurs and tried with the new tape too, pls help us.
Regards,
Bharathi -
Hello!
I have problems with clearing logs via transaction DB13.
When I start this operation for the first time after starting SAP system this job is finished successfully.
But then I have error in this job:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000033, user ID SAP*)
Format "X_PAPER" not defined for printer "$LOCL"
Execute logical command BRCONNECT On host SAP-TSC
Parameters: -u / -jid CLNUP20140505004009 -c -f cleanup
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = %_TCPIP_%1
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.006
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20140505004031
COMMANDNAME = BRCONNECT
ADDITIONAL_PARAMETERS = -u / -jid CLNUP20140505004009 -c -f cleanup
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = SAP-TSC
DESTINATION
SY-SUBRC = 902
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
Job cancelled after system exception ERROR_MESSAGE
And i have to restart the SAP for using DB13.
Why it's happening?
P.s. Yes, i changed SAPSR3 passwords via brtools and brconnect.
Thank you for answering.Hello Janos,
I checked SAPDBHOST parameter in DEFAULT.PFL:
SAPDBHOST = SAP-TSC
BRCONNECT is located in the directory with appropriate user rights.
Also I checked developer traces:dev_rd
LOCATION SAP-Gateway on host SAP-TSC / sapgw00
* ERROR timeout during allocate
* TIME Wen May 07 16:08:10 2014
* RELEASE 720
* COMPONENT SAP-Gateway
* VERSION 2
* RC 242
* MODULE gwr3cpic.c
* LINE 6070
* DETAIL no connect of TP sapxpg from host SAP-TSC.localdomain after 20
* sec
* COUNTER 11
But i can't understand why rebooting sap system the first clearing logs finish successfully, but then i have errors. -
Dear Team,
I am using HP-UX with Oracle. When I am doing Full Online backup via db13 . It give error
BR0428W File /oracle/PRD/sapreorg/sr3700.data11.Z will be overwritten
BR0202I Saving /oracle/PRD/sapreorg/sr3.data1.Z
BR0203I to /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C dd obs=128k bs=128k if=/oracle/PRD/sapreorg/sr3.data1.Z of=/dev/rmt/0mn':
1190+0 records in
1189+1 records out
I/O error
BR0280I BRBACKUP time stamp: 2009-07-15 03.12.35
BR0279E Return code from 'LANG=C dd obs=128k bs=128k if=/oracle/PRD/sapreorg/sr3.data1.Z of=/dev/rmt/0mn': 2
BR0222E Copying /oracle/PRD/sapreorg/sr3.data1.Z to/from /dev/rmt/0mn failed due to previous errors
BR0280I BRBACKUP time stamp: 2009-07-15 03.12.37
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bebadoop.fnt 2009-07-15 03.12.35
But archive log is working fine.
RajHi,
What is the pathc level of BR*Tools. Check if this Note 994136 - Backup to hard disk fails with error BR0278E SAP note helps you.
I/O error
Also check OS logs.
Thanks
Sushil -
Database backup problem in DB13
Dear All,
<b>When we take backup from the command prompt using Brbackup or Brarchive it executes the backup process successfully, but when I schedule the same thing in the DBA calendar it shows that job finished but it actually does not take the backup. I have given all parameter required for the backup in the DBA calendar like eg, the scheduled time, the tape generic name, archive type.</b>
Can anybody guide what is going wrong ...because of that I am not able to schedule backup using DB13 tcode.
At present I am using Brtools( Brbackup) to take the backup.
Thanks in adv.
BhaskarDear Mr. Fidel,
Thanks for your reply.
My operating system is Windows 2003.
I am loged in with <SID>adm.
When I use DB13 to schedule the backup (online full database backup) it completes sucussfully......but if I choose to schedule backup(online full database + redo logs file) after taking backup of the database when it to take redo logs file give an error message as:-----
<b>I am giving lines where the error occurs...</b>
BR0280I BRBACKUP time stamp: 2007-06-27 19.32.19
BR0063I 43 of 43 files processed - 120279.500 MB of 120279.500 MB done
BR0204I Percentage done: 100.00%, estimated end time: 19:32
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2007-06-27 19.32.23
BR0340I Switching to next online redo log file for database instance MRP ...
BR0321I Switch to next online redo log file for database instance MRP successful
BR0117I ARCHIVE LOG LIST after backup for database instance MRP
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination F:\oracle\MRP\oraarch\MRParch
Archive format ARC%S_%R.%T
Oldest online log sequence 3173
Next log sequence to archive 3176
Current log sequence 3176 SCN: 33992945
Database block size 8192 Thread: 1
BR0018I Waiting for the next offline redo log file...
BR0017E Offline redo log file E:\oracle\MRP\102\RDBMS\ARC03175_0603728372.001 not found
BR0056I End of database backup: bdvoqpkp.ant 2007-06-27 19.32.28
BR0280I BRBACKUP time stamp: 2007-06-27 19.32.28
BR0054I BRBACKUP terminated with errors
thanks. -
Problem in DB13 - standalone gateway installed - error due to env
Hello,
As we have db and ci on separate server and there was no gateway on db server, I installed standalone gateway the rfc connection started working fine. When I try to execute any BR* command through DB13, it gives error.
I checked using SM69 the output of env and BRTOOLS using the working RFC destination.
BRTOOLS ends with return code 3 - BR0152E Environment variable ORACLE_SID is not set
I modified .sapenv.csh and .sapenv.sh in /home/sidadm of gateway sid, but the error remained the same.
When command env is run through SM69 suing the working RFC destination, its output is not having the set variable values.
In trace, there are no errors reported, but it does not show which environment variable file its checking.
Can someone please let me know which environment variable file is checked when the SM69 - env is run?
Thank you,
VaibhavDear Vaibhav,
Please,check the environment variable using the transaction SM49
and external command "ENV" for Unix - this is the environment valid
for jobs running from DB13. The environment of ora<sid> on Unix is not
relevent for jobs running from DB13.
1. please copy appropriate version of BR*-executables in the directory
/sapmnt/SID/exe and set the owner and permissions as per note #113747.
2. set the environment variables ORACLE_SID, ORACLE_HOME, SAPDATA_HOME,
SAPSID=SIDfor the user "sidadm" and restart the standalone gateway
to activate the new environment.
After that changes, DB13 jobs should work.
Regards,
Rafael -
After Redirected Restore with different schema problems with db13
Hello, we made a redirected restore. We have different schema between production and quality system.
According to note 713524 we made the following changes:
create db connect user from the source system in the target system (unix user, sap<sid>)
set parameter dbs/db6/schema=sap<sid> in the instance profile
set dbs_db6_schema = sap<sid> in the environment for <sid>adm and db2<sid> (dbenv...)
add user sap<sid> into /sapmnt/<SID>/global/dscdb6.conf and set password with dscdb6up sap<sid> <password>
The system is now up and running. But transaction db13 is not working
SQL0443N Routine "*SHOT_DBM" (specific name "")
has returned an error SQLSTATE with diagnostic
text "SQL1092 Reason code or token: SAPR3
". SQLSTATE=38553
Regards,
AlexanderHi Alexander
sorry , forget the grants , they should come from the source system .
If you have multiple App-Servers , did you perform the above mentioned action in all affected profiles and environments of your Q-System ?
Please check , if you can limit this issue to an separate App-Server or to all App-Servers .
Best regards
dirk -
Hi,
We are unable to schedule the jobs in DB13 with the error SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error:
We have a cluster setup where DB is running on one node and the application server on the other node.
Now as per the snote: 446712 we need to have eithe RSH or any other tool.
Is this RSH comes by default in windows 2003 or do we need install it seperately ? Please advise on other alternative ways
to this issue.
Thanks & Regards,
DVRKHi DVRK,
There are no issues as such installing a gateway instance on the Database Instance. Two things which you might need to take care are
1. Include the gateway start command in the os user profile or startsap script so that if you restart the DB instance, the gateway instance starts automatically.
2. If the DB instance is on cluster, then include the gateway service and mount points to switchover using the cluster software.
Apart from these two, i do not see any issues as such.
Cheeers...,
Raghu -
Hello,
when i start a
brconnect -u / -c -f check
or
brbackup -u / -c force -w only_dbv -p init<SID>.sap -m ALL
i can't see that in DB13.
Knows anybody a option/solution to see running br-jobs on os level in DB13 -> I have this situation in any different releases.
Thank you very much for supporting me.
Regards,
MarkusHi Markus,
you can see all running BR* jobs in DB14 else you can see all runningBR* jobs in OS level.
if you are UNIX platform you can execute following command
ps -ef | grep br* - to find out all br* jobs in OS level.
hope this help
Cheers,
Praveen -
Error while scheduling VerifyDB in DB13
Hi,
I am facing an error while scheduling VerifyDB through DB13 in my SAP ECC 6.0 system. This problem is occuring in the entire landscape(Dev, Quality & Prod) after i did an oracle upgrade from 10.1.0.4 to 10.2.0.2. The error is as below:
BR1301W Error message from likeywlib:
===...could not load SSF library libsapsecu.so .
BR1301W Error message from likeywlib: likey_init: Couldn't load SAPSECULIB ("libsapsecu.so") using function SsfSupInit (), rc = 10.
BR1302E Initialization of license key library likeywlib failed, return code 1
BR0602E No valid SAP license found - please contact SAP
I also checked the note 912969 which gives the below solution:
The error is corrected in BRSPACE 7.00 patch 10
But the BRSPACE is already on a higher patchset (18). Patch 10 is already applied.
Can somebody please guide me on this.
Thanks & Regards,
SmithaHi Andreas,
the error is exactly the same.
The database is Oracle 10.2.0.2 and the backup is performed with a mix of BRtools and Legato.
Any idea?
Thanks
Gianluca -
DB13 can not find the correct controlfile.
My environment is
Win2003
Oracle 10g
Ecc 6.0
When I use DB13 for the full offline backup, I get the following message:
BR0051I BRBACKUP 7.00 (13)
BR0055I Start of database backup: bdtelngh.afd 2006-08-02 21.01.03
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\DEV\102\database\initDEV.ora - default assumed
BR0274W File 'D:\oracle\DEV\102\database\CTL1DEV.ORA' not found
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home D:\oracle\DEV\102
oracle_profile D:\oracle\DEV\102\database\initDEV.ora
sapdata_home D:\oracle\DEV
sap_profile D:\oracle\DEV\102\database\initDEV.sap
backup_mode ALL
backup_type offline_force
backup_dev_type disk
backup_root_dir D:\oracle\DEV\sapbackup
compress yes
compress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\mkszip -c $ > $
uncompress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\uncompress -c $ > $
exec_parallel 0
system_info SAPServiceDEV JXCDEV Windows 5.2 Build 3790 Service Pack 1 Intel
oracle_info DEV 10.2.0.2.0 8192 1870 13112942
sap_info 700 SAPSR3 DEV U0388471103 R3_BASIS 0002894446
make_info NTintel OCI_10103_SHARE Apr 2 2006
command_line brbackup -u / -jid ALGOF20060802210000 -c force -t offline_force -m all -p initDEV.sap -w use_dbv -a -c force -p initDEV.sap -s -w
BR0116I ARCHIVE LOG LIST before backup for database instance DEV
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\DEV\oraarch\DEVarch
Archive format ARC%S_%R.%T
Oldest online log sequence 1867
Next log sequence to archive 1870
Current log sequence 1870 SCN: 13112942
Database block size 8192 Thread: 1
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\DEV\SAPDATA1\SR3_1\SR3.DATA1
BR0120I Control files
File Size Id. Device Link Type
D:\oracle\DEV\102\database\CTL1DEV.ORA 8192 0 0 NOLINK FILE
BR0280I BRBACKUP time stamp: 2006-08-02 21.01.09
BR0115I Compression rate for all files 5.8422:1
BR0056I End of database backup: bdtelngh.afd 2006-08-03 06.07.57
BR0280I BRBACKUP time stamp: 2006-08-03 06.07.59
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2006-08-03 06.07.59
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20060802210000 -d disk -c force -p initDEV.sap -s -w'
BR0280I BRBACKUP time stamp: 2006-08-03 06.08.06
BR0292I Execution of BRARCHIVE finished with return code 1
1.It seems the correct control file can not been found.
I have checked the file "initDEV.ora" and spfile.In them the positions of control file are "/origlogA/cntrl","/origlogB/cntrl" and "/sapdata1/cntrl".
So I donot know why the process of DB13 cannot find the correct control file and search the file CTL1DEV.ORA.
Because the correct control file could not been backuped,I can not restore and recover the database.
What causes it?
2.
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
How can I solve this warning? And why it occurs?
Anyone can help me?
Thanks!
Ryan FungPraveen,
I had the same problem as Ryan and Gary on a new XI \ Oracle 10g installation and your suggestion did solve this. It seems that when you run the first BRTOOLS based backup, Oracle tries to create a PFILE from the automatically generated SPFILE, but the DB user doesn't have rights to delete the SAP.ORA file. Once you assign SAP_<SAPSID>_GOBALADMIN full rights to the Oracle folder, an updated INIT<SID>.ORA is generated and the default SAP.ORA is deleted on the next BRTOOLS backup run.
Thanks for the tip.
Rgds,
Andrew -
Job cancelled after system exception ERROR_MESSAGE in DB13
Hello All,
When i opened the t-code DB13 i saw that this job "Mark tables requiring statistics update" is cancelled.
JOB LOG:
12.02.2011 22:00:16 Job started
12.02.2011 22:00:16 Step 001 started (program RSDBAJOB, variant &0000000000085, user ID 80000415)
12.02.2011 22:00:18 Job finished
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
When check for the BGD Job in SM37 for this job i found the same error in the job log with the status cancelled.
Job log overview for job: DBA!PREPUPDSTAT_____@220000/6007 / 22001700
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
I couldn't find any logs in SM21 of that time also no dumps in ST22.
Possible reason for this error:
I have scheduled the job Check database structure (only tables) at some other time and deleted the earlier job which was scheduled during the bussiness hours which caused performance problem.
So to avoid performance issue i scheduled this job in the mid night by cancelling the old job which was scheduled during the bussiness hours.
And from the next day i could see this error in DB13.
Rest all the backups are running fine but the only job getting cancelled is for "Mark tables requiring statistics update"
Could anyone tell me what should i do to get rid of this error?
Can i schedule this "Mark tables requiring statistics update" again by deleting the old one?
Thanks.
Regards.
Mudassir ImtiazHello Adrian,
Thanks for your response.
Every alternate day we used to have performance issue at 19:00hrs.
Then when i checked what is causing this problem, i discovered that there was a backup "Check Database Structure (tables only)" scheduled at this time and it was mentioned that this backup may cause performance issue.
Then i changed "Check Database Structure (tables only)" the time of this backup to 03:00hrs.
The next day when i checked DB13 i found that one of the backups failed.
i.e. "Mark Tables Requiring Statistics Update"
Then i checked the log which i posted earlier with the error: "Job cancelled after system exception ERROR_MESSAGE"
I posted this error here and then i tried to delete the jobs scheduled i.e. "Mark Tables Requiring Statistics Update" and then re-schedule it at the same time and interval.
And then it started working fine.
So i just got curious to know the cause of the failure of that job.
Thanks.
Regards,
Mudassir.Imtiaz
P.S There is one more thing which i would like to say which is not related to the above issue, and m sorry to discuss this in this thread.
I found a few Bottlenecks in ST04 with Medium and High priority.
Medium: Selects and fetches selectivity 0.53%: 122569 selects and fetches, 413376906 rows read, 2194738 rows qualified.
High: 108771 primary key range accesses, selectivity 0.19%: 402696322 rows read, 763935 rows qualified.
There are a lot these.
I would really appreciate if you tell me what is the cause for these Bottlenecks and how to resolve.
Thanks a lot. -
Error when executing database check using brconnect or in DB13.
Dear Experts,
I am facing problem in executing database check using brconnect or in DB13.
I get the following error:-
<b>I am giving the last few lines where the error comes</b>
G:\oracle\MRP\sapbackup 6 52228060 20440724 60.86 0 0
G:\oracle\MRP\sapcheck 6 52228060 20440724 60.86 0 0
G:\oracle\MRP\sapreorg 6 52228060 20440724 60.86 0 0
BR0252E Function _stat() failed for 'G:\oracle\MRP\saptrace' at location BrDiskStatGet-1
BR0253E errno 2: No such file or directory
BR0277E Determination of disk volume status for G:\oracle\MRP\saptrace failed
BR0806I End of BRCONNECT processing: cdvnwuiw.chk 2007-06-23 16.45.39
BR0280I BRCONNECT time stamp: 2007-06-23 16.45.39
BR0804I BRCONNECT terminated with error
<b>This is the config path in my init<sid>.ora.</b>
*._OPTIM_PEEK_USER_BINDS=FALSE
*.background_dump_dest='F:\oracle\MRP\saptrace\background'
*.compatible='10.2.0'
*.control_file_record_keep_time=30
*.control_files='G:\oracle\MRP\origlogA\cntrl\cntrlMRP.dbf','G:\oracle\MRP\origlogB\cntrl\cntrlMRP.dbf','G:\oracle\MRP\sapdata1\cntrl\cntrlMRP.dbf'
*.core_dump_dest='F:\oracle\MRP\saptrace\background'
*.db_block_size=8192
*.db_cache_size=281699942
*.db_files=254
*.db_name='MRP'
*.dml_locks=4000
*.event='10191 trace name context forever, level 1'
*.FILESYSTEMIO_OPTIONS='setall'
*.job_queue_processes=1
*.log_archive_dest='F:\oracle\MRP\oraarch\MRParch'
*.log_buffer=1048576
*.log_checkpoint_interval=0
*.log_checkpoints_to_alert=true
*.open_cursors=800
*.optimizer_features_enable='10.2.0.1'
*.pga_aggregate_target=375599923
*.processes=80
*.recyclebin='off'
*.remote_login_passwordfile='exclusive'
*.remote_os_authent=true
*.sessions=96
*.sga_max_size=563399884
*.shared_pool_reserved_size=28169994
*.shared_pool_size=281699942
*.sort_area_retained_size=0
*.sort_area_size=2097152
*.statistics_level='typical'
*.undo_management='AUTO'
*.undo_retention=43200
*.undo_tablespace='PSAPUNDO'
*.user_dump_dest='F:\oracle\MRP\saptrace\usertrace'
*.workarea_size_policy='AUTO'
<b>The path in my system is same as mentioned in the init<sid>.ora</b>
Please help me to find out cause of the error.
ThanksDear Mr. Yaroslav,
Thanks,
I have checked in <sid>adm user since we have looged in the same user Id.
There was no entrie for the SAPTRACE in environmental variable.
I have inserted and given the requried path"F:\oracle\MRP\saptrace".
Thankyou....hope in my next restart of the server it will work.... -
DB13, Error while backup
Hello
I am trying to schedule Whole offline backup through DB13 in Solution Manager 4.
The backup kicks off at the schedule time but ends with error with in seconds.
When i go and check the background job in SM37, the Job DBA:ALLOFFLINE______@174008/4000 is with Finished successfully status
I check the JOB log in DB13,
21:00:00 Job started
21:00:00 Step 001 started (program RSDBAJOB, variant &0000000000000, user ID XYZ)
21:00:00 Execute logical command BRBACKUP On host DQESAP03
21:00:00 Parameters:-u / -jid ALLOF20090401210000 -c force -t offline_force -m all -p initDBI.sap -w use_dbv
21:00:01 Job finished
I go to Action log in DB13
Status is in Error
Return code is 003 Error during initialization.
when i go to detail action log:-
BRBACKUP Action Log for Database <DBSID>
From: 01.04.2009 20:40:09
LogFile: beagpiht.afd
Return Code: 0003 Error during initialization
No action log for this action found in the database
Check the detail log
There are no logs created at OS level /oracle/SID/sapbackup
I then started the backup usning BRTOOLS at os level and Backup is successful.
Please suggest what could be the problem.
Thanks>
Subhajit Sengupta wrote:
> I think you need to manitain the BRBACKUP command in table SDBAC to be able to run a backup from DB13.
OK, putting my 5cents
1) I do not think the recommendation is good.
Table SDBAC should only be "touched" if indicated by an SAP note.
2) at the same time, I think it may be part of the problem.
The OP states:
> I am trying to schedule Whole offline backup
also
> background job in SM37, the Job DBA:ALLOFFLINE___
and finaly, the command executed is:
> Parameters:-u / -jid ALLOF20090401210000 -c force -t offline_force -m all -p initDBI.sap -w use_dbv
That is an OFFLINE backup plus a verification.
AFAIK, that is not a standard SAP JOB.
I assume that someone has changed the entry in SDBAC introducing this "new" action.
DB13 does not have coded such action, therefore it is not able to find it on the "control" tables and also it is not able to find the log.
Advise
1) check if someone changed that entry
2) check if there any "beagpiht*" log file in your system
3) do not play with SDBAC
Another option would be that you are in a MCOD database. Is that the case?
Maybe you are looking for
-
ITunes 7.0.2.16 won't upgrade. 7.2 won't download.
Hi there, My current 7.0.2.16 iTunes crashs after about 2 to 5 min. When I try to download 7.2 nothing happens after I press download, except the "thank you for downloading screen". I don't get asked anything about running or saving a file. Nothing.
-
Major Bug in SSIS 2012 Script Component - Potentially
I think there is a major issue with the Script Component in SSIS when running SSDT on Windows 8.1. I have a Script Component that functions as a data source. The script compiles successfully. However, when returning back to the Data Flow Task, I stil
-
LSMW - Migration of Opportunites, Text field is missing !!!!
Hi everybody, I try to migrate opportunites via LSMW into SAP CRM. (Idoc: Message Type "CRMXIF_ORDER_SAVE_M, Basic Type "CRMXIF_ORDER_SAVE_U04") I have done this with one legacy system and it works fine. But for the second legacy system I wa
-
Just a minor anoyance which for which I'm hoping there is a quick fix. When I put new photos into iPhoto on my iMac, it always seems to take a few days before they appear on the Apple TV. They always do get there, but not till after everyone has lost
-
Close tap icon (x) disapear after i update to v 6
after i upgrade i found when i open about 3 tab the x icon was hide and cant close the tab and when i close the browser and open it its appear > then 3 or 4 tab its disaapear