DBAdapter serious issue

Sorry but I cant use this adapter here. Its very important to my job but we failed. I tried everything including redeploy adapter and reconfiguring it.
A operação selecionada execute não pôde ser chamada.
Ocorreu uma exceção ao chamar a operação de serviço da web. Veja mais detalhes nos logs.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked.<br>Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'guiaServiceTesteSelect' failed due to: Could not create/access the TopLink Session.<br>This session is used to connect to the datastore.<br>Caused by Exception [TOPLINK-25004] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.exceptions.XMLMarshalException<br>Exception Description: An error occurred unmarshalling the document<br>Internal Exception: Exception [TOPLINK-27101] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.platform.xml.XMLPlatformException<br>Exception Description: An error occurred while parsing the document.<br>Internal Exception: oracle.xml.parser.v2.XMLParseException: Can not find definition for element 'object-persistence'.<br>". <br>The invoked JCA adapter raised a resource exception.<br>Please examine the above error message carefully to determine a resolution.<br><br>
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'guiaServiceTesteSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [TOPLINK-25004] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.exceptions.XMLMarshalException
Exception Description: An error occurred unmarshalling the document
Internal Exception: Exception [TOPLINK-27101] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.platform.xml.XMLPlatformException
Exception Description: An error occurred while parsing the document.
Internal Exception: oracle.xml.parser.v2.XMLParseException: Can not find definition for element 'object-persistence'.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575)
     at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381)
     at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'guiaServiceTesteSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [TOPLINK-25004] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.exceptions.XMLMarshalException
Exception Description: An error occurred unmarshalling the document
Internal Exception: Exception [TOPLINK-27101] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.platform.xml.XMLPlatformException
Exception Description: An error occurred while parsing the document.
Internal Exception: oracle.xml.parser.v2.XMLParseException: Can not find definition for element 'object-persistence'.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260)
     at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985)
     at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:716)
     at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569)
     ... 68 more
Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'guiaServiceTesteSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [TOPLINK-25004] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.exceptions.XMLMarshalException
Exception Description: An error occurred unmarshalling the document
Internal Exception: Exception [TOPLINK-27101] (Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)): oracle.toplink.platform.xml.XMLPlatformException
Exception Description: An error occurred while parsing the document.
Internal Exception: oracle.xml.parser.v2.XMLParseException: Can not find definition for element 'object-persistence'.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:882)
     at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:715)
     at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:226)
     at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:97)
     at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256)
     ... 71 more

Hi Jose,
the DbAdapter's db.jca file contains a property MappingsMetaDataURL, which points to an Oracle TopLink file ending in or-mappings.xml.
The first entry in this xml file is (for 11.1.1.2.0):
<toplink:object-persistence version="Oracle TopLink - 11g Release 1 (11.1.1.2.0) (Build 091016)" xmlns:opm="http://xmlns.oracle.com/ias/xsds/opm" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:toplink="http://xmlns.oracle.com/ias/xsds/toplink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
Starting in 11.1.1.3.0, whenever you create an or-mappings.xml, we now use the EclipseLink schema, which is the open source version of TopLink. So the head element looks like this:
<object-persistence xmlns="http://www.eclipse.org/eclipselink/xsds/persistence" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:eclipselink="http://www.eclipse.org/eclipselink/xsds/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="Eclipse Persistence Services - 2.1.2.v20101104-r8475">
11.1.1.3.0 can read either schema. However 11.1.1.2.0 can only read the first one. Maybe what happened is you are trying to run on 11.1.1.2.0 a process that was at least partially modeled on 11.1.1.3.0.
Failing that maybe your *or_mappings.xml file is corrupt somehow, and you should run through the DbAdapter wizard in edit mode to hit finish and regenerate it, or try doing so.  You may need to recreate it and redeploy.  Also make sure you are not using an 11.1.1.3.0 JDev with 11.1.1.2.0.
Thanks
Steve

Similar Messages

  • Non-English characters not displaying correctly - Serious Issue

    My corporate email is on a Lotus Domino server with Lotus Traveler installed.
    I have set my PlayBook (with OS 2) up to syncronize with the corporate email trough Active Sync (see http://alturl.com/qh3nn), which works perfectly.
    I have however noticed that in some emails special non-english characters are displayed correctly but in some emails special non-english characters are displayed as a black diamond with a question mark inside.
    This is of course a serious issue as most non English speaking countries use some special characters.
    When trying to understand this problem how can I analyse the emails and see what character set is being used?
    And of course better; has someone solved this?

    I am having the same problem. Is there any update available?

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • What program to use to repair a hard disk with "serious" issues?

    Norton Disk Doctor that came preloaded on my G3 iBook found some "serious issues" that must be repaired with Disk Doctor on CD-ROM. When I go to Symentec website to order Disk Utility Software on CD-ROM, I find only such utility software avilable for PC.
    Apple Disk Utility also found that this hard disc needs to be repaired, but the Repair button is not active, even when I restart the computer with OS X CD-ROM.
    Any suggestions, please?
    iBook G3   Mac OS X (10.1.x)  

    Hi, and welcome to Apple Discussions.
    Try starting up in Single-User Mode and running fsck. (File system check.)
    At the command-line prompt, type /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (nameofvolume) appears to be OK
    If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    *** FILE SYSTEM WAS MODIFIED ***
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in.
    This allows you to repair the drive without the CD or third-party software. If after multiple tries with fsck, errors remain, post back and we will explore other possible solutions.
    (Note: Information in this post is from Apple Knowledge Base article #106214.)

  • W540 + Ultra docks = big serious issue

    Hello everyone, We recently ordered 30+ x240s and w540 laptops using the ultradocks. Here's the prequel
    1. initially they had the issue with monitors going blank, that has been fixed with a firmware update
    2. there was a second firmware update ver 2.21 that fixes some issues with HP monitors. Ok , done.
    Ok now all is well, we have the x240s on the docks and w540s with their docks + the 175w powersupply supplies etc.
    Now we have users that wanted 27inch and some 30 inch monitors and a big big problem comes up.
    The docks cannot drive anything higher then those 24inch monitors (1920x1200). the 27 inch (2560x1440) and the 30inch (2560x1600) does not work AT all.
    it does not work with even ONE of those monitors hooked into the dock not speaking of the 2 that users wanted.
    So w540+ultra dock + 1 27/30 inch monitor = nothing, blank screen, go to display settings and it detects a grey option
    Now, the w540 without the ultra dock and hooked directly into a 27/30 inch monitor = no problem, we have full functionality.
    We have tried every combination to try to get it to work and it's a no go.
    Researched the dock's DVI port and see if we can possibly use that, nope, the DVI is only single link so our only option are the 2 display ports on the dock.
    Of course those don't work at all. We have opened a ticket with lenovo and it's been escalated, awaiting responds.
    This maybe a serious issue I am seeing here since we have 30+ docks and more coming. (yes we have tested on them all and their firmwares are 2.21)
    Anyways, if anyone has run into this please confirm. Suggestions are welcome, but I am sure we have tried just about everything.
    Thanks Everyone, J

    I was able to connect a W540 to an Ultra Dock (170W) in "Standard" mode and then get an external monitor working at a resolution of 3840 x 2160. The monitor is a Samsung U28D590D connected via the DisplayPort on the docking station. Note that "Advanced" mode was very unstable, and often crashed within a few minutes. Standard mode works when connected via DisplayPort but would also crash instantly and repeatedly if connected via HDMI.
    Tested with a variety of bios, firmware and driver versions. Including System BIOS v2.17 & v2.18. Docking station firmware v2.22 and multiple Intel and NVIDIA driver versions. None worked with HDMI or in Advanced mode. Hopefully this gets fixed at some point.

  • I think there is a bug in safari......Whenever i swipe my fingers for going to the previous page on safari the tabs open get hanged up and i have to restart safari.This is a serious issue.!

    Serious issue.....

    Might be a Safari extension issue...
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • HT201401 I am writing to bring to your attention a serious issue I had with your product. My brother  bought one iPhone 4, 16 gb mobile phone from US last year and gifted me in India. but it couldnt be serviced in India why ?

    Hi,
    I am writing to bring to your attention a serious issue I had with your product. My brother  bought one iPhone 4, 16 gb mobile phone from US last year and gifted me in India. In few months it had a problem with its home key. I took the phone to service service center and they told me that your phone is having hardware problem and as the phone is under warranty cannot be replace in India. You can come back when this is out of warranty. Now few days back when i walk again to the service center they stated that this phone we cannot repair here in India because of this phone purchased from US. 
    This a total disgraceful service from such a big brand like apple.
    I hope to hear back from you about this incident.
    Sincerely,
    Niranjan
    <Personal Information Edited by Host>

    No iPhone has a international warranty. Warranty is valid only in
    country of original purchase. Since iPhone was bought in the US,
    you must return the iPhone to the US. That means you must personally bring
    the iPhone to Apple in the US or send it to a friend/relative in the US for them
    to take to Apple. After replacement, your friend can ship it back to you. Shipping
    and insurance costs are your responsibility.
    Apple does not accept international shipments for evaluation/repair
    and will not ship replacements out of the country.

  • Serious issue in discoverer viewer

    Dear all,
    I have serious issue with discoverer viewer 9.0.2.53 version.
    I am in need of displaying lengthy worksheet in discoverer viewer,i am using crosstab format.
    my client wants to compare the datapoint value of worksheet with leftside drillup/down and top drill up/down values.
    I want the assumption of "display similar to desktop display of worksheet"..is it possible to have same type of format or alternative one by customizing viewer?
    Plz help me out of this..if viewer does not support this issue i think..its not best suited for report making..
    plz somebody confirm about this issue..its very urgent to proceed further...
    regards
    chandra

    Already checked that. I don't think the problem is color profile related.
    Besides, when I reset the viewer as described above the colors look perfectly fine.

  • Serious issue in delegated administration

    I have serious issue in delegated administration. i have created delegated admin
    role and assign to group. so that i should be able to view/modify only that
    group, but i can view/modify using API all groups irrespective whether the role
    is assigned or not for a group.
    I have scenario like this.
    1. Create a group called "officeAdmin"
    2. Create a group called "users" under group "officeAdmin"
    3. Create a user called "companyadministrator" under "everyone" tree structure
    of admin portal
    4. create delegated administrator role called "companyrole" for a user "companyadministrator"
    5. assign "companyrole" to group "officeAdmin". so user "companyadministrator"
    will be administrator for "officeadmin" group and its child.
    Now my requirements is when "companyadministrator" login i should get only groups
    which he can administer i.e in this case i should get only "officeadmin" and "users"
    groups.
    Please help me how i should programatically get the groups "officeadmin" and "users"
    when "companyadministrator" logs in.
    test the scenaio : create the above scenario using admin portal and then login
    as "companyAdministrator" and you can see only "officeAdmin" and its child groups.
    thanks, shashi

    Jeanne,
    Thanks for answering.
    I tried changing the setting Preferred Navigation Pane
    Format, however, the results were not satisfactory.
    What is the most interesting aspect of the second issue
    (broken Glossary pane) is that the issue exists in newer browsers
    or browser versions (on Linux an HP-UX) and that on Windows
    systems, the issue was not seen with all browsers which were
    tested.
    Has anybody else spotted these issues, too?

  • Serious issue with Mac OS X 10.6.4 and wireless networking

    Hello there, I'm having a serious issue with my TP-Link WP-8910G wireless router and Mac OS X 10.6.4 .
    Problems began some days ago. In short, after a certain period of time, my router drops the wireless connection out and, when I try to re-establish it, if a very short period of time has passed after disconnection Airport detects the wireless network and returns "connection timeout". If I wait more, no wireless connection is detected, and I have to reset the router and re-connect Airport. This is very annoying.
    How can I solve this issue?

    Have you verified that the router is not the problem?

  • BIOS non accessible after installing W10 x86. Serious Issue.

    Potentially a serious issue.
    From a "cold boot" (following a previous shutdown command) the BIOS is non accessible. The actual clickable text of "Press F2 to enter set up" is missing. This means that no recovery of this PC exists such as booting from
    a Windows disc or other bootable media.
    Fortunately, providing you can boot into W10 and do a restart, then the BIOS options appear.
    This means that if Windows didn't boot into Windows your PC could well become a brick.

    I hope I can help you about. I've note a funny thing on my PC: I have installed Windows 10 on a spare HDD, clean install on new formatted disk, without any other HDD inside. Later I've "shut down", unplugged all cables and removed
    from PC the Windows 10's HDD. I have then rebooted my PC on my usual HDD, it was telling me when pushing the power-on button "stepping out from hibernation". I've seen ~ this before in 7 and 8 installations (only). Not a BIOS/PC/HDD problem for sure.
    Maybe you have already done that before, sorry if my message is giving too much details, but I wouldn't want that you break something down on the process :-)
    Try to follow those steps in this order:
    1 - Remove all the medias connected (USB keys, CD, external HDD etc.).
    2 - Plug off the power cord, remove the battery, remove the HDD (usually is easily accessible from one side or from down-side of your laptop), wait for 4-5 minutes, then put in the battery (or the power cord) and try to power on your laptop
    without any HDD, USB key or DVD.
    Normally you should see the BIOS as usual, it will announce you that you have no boot media, or that there is an error and default settings were loaded. If so, power off, disconnect power source (cord and battery), plug in the HDD and
    restart the computer. If it's again blocking your bios, return to step 2 for removing the HDD. You may consider to thoroughly cleaning your HDD (including the MBR, formatting will not clear everything out, rather delete the partitions, re-create them, re-format).
    If 1 and 2 don't change the state of your BIOS, the error it's not connected with your HDD/OS installed. It just happened that starts just after you installing a new OS.

  • Serious issue with password manager - mouse selection in MS word 2007

    A little while ago, after installing some thinkvantage updates, I started to loose selection with the mouse in microsoft word 2007 after few minutes of usage (and derivatives such as outlook). I have a T61 with Windows 7 64 bit ultimate.
    I did many internet searches and surprisingly many other users who had this issue were Lenovo users so I'm not even sure if this issue is windows 7 specific.
    Disabling totally the password manager solved the problem - so there might be a serious issue there...
    Erik.

    Confirmed here http://forums.lenovo.com/t5/Windows-7-Discussion/Weird-issues-with-T61-and-Win-7/td-p/179635
    I forgot to subscribe to the topic

  • HELP: SERIOUS ISSUES WITH BILLING

    I have had serious issues with BT since joining their service. Without getting into the issues we had with the BT homehub and other things at the start of the contract with them here is what's been happening. 
    When we joined BT we explained that we wanted a monthly direct debit. Sounds simple enough but apparently not. 
    I have phoned over 6 times in the last year to change this. It has still not happened. Several times we were told that on the system it said monthly for it to be then taken out quarterly. In July while we were away this happened again. Only as we assumed that as they had informed us it would definitely be on monthly direct debit that it was the money for the whole of the quarter was not there. So when they took the money for a quarterly bill again. We were charged. It has set back other bills as the money had been eaten up by charges for this. As you can imagine we were quite annoyed. This was not our fault and we felt that BT were not capable of holding our account details without taking money they we repeatedly requested not to. I admit we should have kept a closer eye on our bills account but you don't think that a company will repeatedly do this to you. 
    After phone calls it emerged that they would not say more than a 'sorry' about this. 
    The saga then continued. I cancelled the quarterly direct debit at the back and have asked BT to send me monthly paper bills. Then last month our phone and internet was cut off. 
    We rang up and suggested that due to the mix up could they add the money we owed to our monthly bills and we'd pay this off on top of the monthly bill. Despite that the reason we owe this at all is not through any fault of our own but through theirs. The money would have been available had they taken it as repeatedly requested.
    We were on the phone for 1hr and 10 mins ( 21st September) to three different people. No, they said  must be paid in 10 day. My partner only managed to get money off this in about an hour - the point being we were happy to pay the whole amount over a year and were not allowed. We asked to speak to a manager after 1hr and 10 and were put back to the start of the queue. 16 minutes later the man we spoke to said a manager named Samantha would call us back. No-one did. 
    On the 22nd of september a rather annoyed me called back and repeatedly requested a manager - sadi would be put though. After 17 minutes the phone went dead. 
    Called later on same thing phone went dead after requesting a manager at 10 minutes.
    Later on called for 28 minutes and told the call centre the issue £20 deducted from amount but said it had to be paid in ten days and a  bill would be sent. Was told that the internet would be reconnected that day. 
    23rd September was hung up on after thre minutes on requesting why the internet had not been connected.
    Phoned later. The man that I spoke to said that no action had been put through to reconnect the internet. He would do it and it would be through by 5pm.
    My partner phoned at 8pm when the internet still had not been reconnected. It was done the next day. 
    Today BT phoned to ask if I had the bill ( Not sent) and tell me that the line will be disconnected by the end of the day. i explained that we were in the middle of complaints procedures with them. She looked on the system and said that there were no notes on the account. I asked for a manager and then asked for this managers superior. She put me through to someone that when questioned was not her superior and half way through my explanation of this....you guessed it..... the line went dead. 
    I am so annoyed that we've been fine with bill paying and as of their mistake we're now in debt to them and feel like we can't sort it out as there is not anyone who will listen or help. Has anyone had similar probelms or does anyone have a number for their English call centre?
    Jess

    hi Jess,
    I am really sorry that you have had so much trouble trying to get this sorted out.  I'll get this straightened out.
    Could you drop me in an email please to the address in my profile with your BT account and telephone number along with a link back to this thread.
    Cheers
    Craig 
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My iphone 4s has some serious issues. After clicking some youtube link, some apps, safari, settings and app store have been deleted. Please help.

    My iphone 4s has some serious issues. After clicking some youtube link, my photos, settings icon, app store icon and safari icon and many more apps have been deleted. My iphone is useless since last 4 weeks. I cant do anything without these missing apps. please help.

    If it was just my router then my own network would kick in wouldn't it?
    No.  Not even sure what you mean by that.  The phone is trying to access particular IP addresses on the internet, which don't exist on "my own network."
    plus all my internet items at home running on my wifi are doing fine
    No again.  The fact that your router works with other devices doesn't mean it's compatible with the iPhone.  Did you even try restarting and updating the router as suggested?

Maybe you are looking for