DBUA errors out after collecting server information

Hi,
We are in the process of upgrading Oracle Database from 9i to 11g on AIX 6.1. After installing the Oracle Software 11g (11.2.0.1) we try to run the DBUA but after showing the screen collecting server information a blank page appears (with no error code) after which the DBUA stops.
Please any hints or any comments.
Thanks.

There are a few oracle notes which may help :
DBUA Fails With a Screen Showing 'Null' [ID 1285052.1]
Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1]
11.2.0.1 Catupgrd.sql Hangs While Running Procedure POPULATE_DBID_AUDIT [ID 1062993.1]
Best Regards
mseberg
Edited by: mseberg on Aug 10, 2011 8:02 AM

Similar Messages

BPEL Console errors out after 10.1.3.4 MLR#9 8589928 upgrade

BPEL Console is completely down after upgrading from 10.1.3.3 to 10.1.3.4 using patchset# 7272722 and on top of it applying the MLR#9 8589928 patch. It errors out as follows:-
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Sat Aug 29 23:33:27 PDT 2009
Build type: release
Source tag: PCBPEL_10.1.3.4.0MLR9_GENERIC_RELEASE
Exception Message:
javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
Any expedited response/answers to resolve this issue is very much appreciated as it is mission critical for us to bring up the environment for significant development tasks immediately. Thx!
Edited by: user11995464 on Oct 11, 2009 1:58 AM

This kind of problems have been observed earlier. May be some of the previous posts in this forum can help you
SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch
http://blogaodosoa.blogspot.com/2009_04_01_archive.html

Tab Page Errors out after migration to new instance

Hi All,
Tab Pages are running well in test instance but when I migrate it to dev instance then
On click of a particular tab that page errors out.
ERROR STACK
## Detail 0 ##
java.lang.NullPointerException
     at exl.oracle.apps.per.eexit.webui.EmployeeUpdateCO.processRequest(EmployeeUpdateCO.java:228)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanConta
[2096]:UNEXPECTED:[fnd.framework.webui.OAPageErrorHandler]:inerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2336)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1735)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
     at oa_html._OA._jspService(_OA.java:84)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:595)
java.lang.NullPointerException
     at exl.oracle.apps.per.eexit.webui.EmployeeUpdateCO.processRequest(EmployeeUpdateCO.java:228)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2336)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1735)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
     at oa_html._OA._jspService(_OA.java:84)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:595)
In PR in EmployeeUpdateCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
String requestParams = pageContext.getParameter("partyNumber");
if ("AlreadyDeleted".equals(requestParams))
System.out.println("Above through already deleted Employee Exception");
OAViewObject disVO = (OAViewObject)am.findViewObject("DisabledPVO1");
if(disVO !=null)
disVO.first();
disVO.getCurrentRow().setAttribute("XXDisabled", Boolean.TRUE);
//throw new OAException("This Employee has already been deleted. Please click on Home Link to come out from this page.", OAException.ERROR) ;
//EXL_EEXIT_ALREADY_DEL//on 20.10.09
throw new OAException("EXL","EXL_EEXIT_ALREADY_DEL");
String employeeNumber = pageContext.getParameter("partyNumber");
if (employeeNumber !=null)
OAViewObject disVO = (OAViewObject)am.findViewObject("DisabledPVO1");
if(disVO !=null)
disVO.first();
disVO.getCurrentRow().setAttribute("XXDisabled", Boolean.TRUE);
//throw new OAException("Employee Resignation has been reversed sucessfully", OAException.CONFIRMATION);
throw new OAException("EXL","EXL_EEXIT_RESIGN_REV");
else
System.out.println("In the else condition of EmployeeCO");
System.out.println("Before disabling Reinitiate Button");
OAViewObject disvotest = (OAViewObject)am.findViewObject("testVO1");//(XXJADisabledPVO1);
System.out.println("Value of testVO1"+disvotest);
if(disvotest != null)
disvotest.first();
//System.out.println("before falsing");
disvotest.getCurrentRow().setAttribute("testnew", Boolean.TRUE);//erroring out here....
//System.out.println("after falsing");
System.out.println("After disabling Reinitiate Button");
if (!pageContext.isFormSubmission())
am.invokeMethod("initQuery", null);
am.invokeMethod("InitUpdateLov", null);
am.invokeMethod("renderJAPage");
am.invokeMethod("renderSupPage");
System.out.println("Calling New Method");
am.invokeMethod("XXrenderSupPage");
am.invokeMethod("disabledRadioButton");
am.invokeMethod("disabledNoticeRadioButton");
String UserId = pageContext.getEmployeeId()+"";
String AUserId = pageContext.getUserId()+"";
System.out.println("Anil EmployeeID is "+UserId);
System.out.println("Anil EmployeeID1 is "+AUserId);
Serializable[] personid = {UserId};
// Commented on 27 May
String userId = (String)am.invokeMethod("getEmployeeNumber", personid);
String userName= pageContext.getUserName();
System.out.println("USER NAMe is "+userName);
System.out.println("userId in CO is "+userId);
Serializable[] params = {userId};
System.out.println("calling LOV in UpdateCO");
am.invokeMethod("XXhandleMyLovUpdateEvent", params);
System.out.println("Method Called in UpdateCO");
// end here 09 june
//end here code of Radio Button
//==> //OAViewObject vo = (OAViewObject)am.findViewObject("EmployeeEOVO1");
//am.invokeMethod("test");
OAViewObject vo = (OAViewObject)am.findViewObject("EmpUpdateEOVO1");
System.out.println("ROw COUNT IN EMPLOYEEUPDATE CO IS "+vo.getFetchedRowCount());
if (vo != null && vo.getFetchedRowCount()>0)
System.out.println("InsidePR of RADIO BUTTON");
// vo.reset(); //New line added
// vo.next(); //new line added
OARow row = (OARow)vo.getCurrentRow();
String email = row.getAttribute("NoticePayBuyoutFlag")+"";
String email1 = row.getAttribute("JoiningBonusFlag")+"";
String email2 = row.getAttribute("RelocationBonusFlag")+"";
String email3 = row.getAttribute("ServiceAgreementFlag")+"";
String email4 = row.getAttribute("NoticePayAdjustedPl")+"";
String email5 = row.getAttribute("NoticePayWithoutAdjustedPl")+"";
System.out.println("RADIO BUTTON VALUE IS "+email);
System.out.println("RADIO BUTTON VALUE IS "+email1);
System.out.println("RADIO BUTTON VALUE IS "+email2);
System.out.println("RADIO BUTTON VALUE IS "+email3);
System.out.println("RADIO BUTTON VALUE IS "+email4);
System.out.println("RADIO BUTTON VALUE IS "+email5);
row.setAttribute("NoticePayBuyoutFlag","NW");
row.setAttribute("JoiningBonusFlag","NW");
row.setAttribute("RelocationBonusFlag","NW");
row.setAttribute("ServiceAgreementFlag","NW");
row.setAttribute("NoticePayAdjustedPl","NW");
row.setAttribute("NoticePayWithoutAdjustedPl","NW");
Thanks,
Sombit...

OAViewObject disvotest = (OAViewObject)am.findViewObject("testVO1");
System.out.println("Value of testVO1"+disvotest);
if(disvotest != null)
if(disvotest.getFetchedRowCount()>0)
disvotest.first();
disvotest.getCurrentRow().setAttribute("testnew", Boolean.TRUE);
Also double check VO should have this VO Attribute.
Thanks
--Anil

LR 2.2/2.3 errors out after every 15-20 image imports

I've seen several topics in the forums discussing errors when exporting images out of LR but I have been experiencing issues during the import process.
I was running LR 2.2 on Mac OS 10.5.6 without any issues. When 2.3RC was released, I addded it on and used it for a few days. It was very buggy so I deleted it and started using 2.2 again. Last night, I went to import the first batch of images (in 2.2) since deleting 2.3RC and got an error message which killed the import process. Now, I totally apologize but I do not have the actual error message to provide but I think it was something along the lines of LR not being able to find a location of sorts.
I assumed that this was a fluke and restarted the import (minus the images that were already imported into the catalog) and the same error occurred after another 20 or so images.
Is it safe for me to assume that this is related to the memory leak issue that others are posting about when exporting? Also, is it possible that some remnants of 2.3RC are in use even though I deleted the actual application? Should I remove all instances of the app and re-install?
Thanks for any help!
Brian

I hadn't imported many files using 2.3RC so I just tried it.
306, Nikon D300 NEF files imported from internal disk
MacBook Pro ('unibody')
The operation took 1 minute 10 seconds excluding the time to create the standard profiles.

Remove-FASTSearchMetadataManagedProperty errors out with config server

Hi,
I have a problem when I execute the command: Remove-FASTSearchMetadataManagedProperty, it errors out with:
Remove-FASTSearchMetadataManagedProperty : Error when communicating with the config server 'The remote server returned
an error: (503) Server Unavailable.'.
At line:1 char:41
+ Remove-FASTSearchMetadataManagedProperty <<<< -Name TestMP -Force
    + CategoryInfo          : OperationStopped: (:) [Remove-FASTSearchMetadataManagedProperty], AdminException
    + FullyQualifiedErrorId : e552: Error when communicating with the config server 'The remote server returned an err
   or: (503) Server Unavailable.'.,Microsoft.SharePoint.Search.Extended.Administration.Commandlets.Schema.RemoveMetad
ataManagedPropertyCommand
but Get-FASTSearchContentCollection works just fine. If I reboot the server, the Remove-FASTSearchMetadataManagedProperty works ok again. I have SP1 and the Decemeber CU installed. Has anyone seen this?
Thanks in advance,
Frank Chin

I'm also getting this. Not sure what to do.. Did you manage to overcome this without re-booting?
Much Thanks!!
Freddie Maize ..A story with Glory is History. Doesn’t matter whether Glory rest in the world of Demon or God. Lets create History..

Expense request getting errored out after Expense approver rejected

Dear Experts,
I am facing issues where employee expense request is getting errored out when the expenses approver reject the Request.
We are using a workflow to move this request.
Once the employee submitted the expense request. We are having 2 level approval of his/her. Supervisor at the 1st and Expense approver at 2nd level
In the 2nd phase the Expense approver rejecting the travel request to make modifications, however the rejected request is NOT routing back to the employee.
Any assistance highly appreciated

Hi Venkat,
Many thanks for your reply
The required work flow is properly configured. I can see after rejection it has been routed to the employee again.
However after rejection its getting errored out, any idea on the possible reasons, does er approver is selecting or inputing any incorrect parameters.
Regards,
Tamiz

Calendar Error 500 after Maverick Server Update

Hello!
After updating our MacMini Server to Maverick and the new OS X Server Version, the Calendar Server is not working. Every client gets this message:
Antwort des Servers
„500“
an Vorgang CalDAVDeleteEntityQueueableOperation.
Any idea to solve the problem?
best regards
Wolfgang

Hi,
Check /var/log/caldavd/error.log
You should find some Python tracebacks indicating which code path was running when the error happened. Each traceback is composed of multiple lines between the word Traceback and an empty line. It's likely that there's a small number of unique tracebacks being printed over and over, so you only need to reply with one instance of each traceback.

DHCP giving out incorrect DNS server information

Migrated my ONLY DHCP server from a 2k3 server to a new 2k8 server and I cannot figure out why it wont give out the correct DNS server settings.
Here is what I have tried so far:
Stopped service on the old DHCP server and forced a /release /renew on the workstation.
Stopped service on both DHCP servers to see if there is some other DHCP server, computers wouldn't get any IPs.
If I setup a reservation for the workstation it will give out the CORRECT DNS settings.
Ran a GPO Policy result for the user and computer I'm testing and no IP configuration is configured at all for any GPO.
Other Information:
Only have 1 scope setup.
When I run a ipconfig /all it does show the DHCP server as the correct one (new server).
This problem was happening on the old server as well, I thought maybe migrating to a newer server would help but I'm getting the exact same results.
Thanks!

Hi,
We can perform a network capture on the client. It will show the process of the DHCP.
Please check the DHCP offer message sent by the DHCP server and the DHCP request message sent by the client.
Make sure that the server gives the right DHCP setting.
If the server is giving the right setting, it should be a client issue. Please check the event log of the DHCP client.
If the server is giving the wrong setting, it should be a sever issue. Please check the configuration of the DHCP sever.
To download Network Monitor, please click the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.
Steven Lee
TechNet Community Support

[Solved] pacman errors out after a hardlock

Hi, I experienced a hardlock today due to a bad memory stick during a pacman update. Now pacman tells me this (with --debug):
looking for inter-conflicts...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package openoffice-base-3.1.0-1
debug: returning error 33 from compute_download_size : package filename is not valid
error: failed to prepare transaction (package filename is not valid)
I deinstalled openoffice-base but I still get the same error.
Oh I think I found the culprit, in /var/lib/pacman/sync/extra/openoffice-base-3.1.0-1/ all files are empty.
I'm removing this directory now...
execute pacman -Syu again
still doesn't work
someone on IRC suggests pacman -Syy, this forces a synchronization of the database
I did that and now I do pacman -S openoffice-base.
This works, it's downloading openoffice-base from one of the mirrors now.
I thought I'd share this.

Thanks for sharing, I'm sure it'll help out someone in the future.

Supplier Sites Interface errors out -- URGENT!! please help.

Hi All,
The log file has the following message when executing the supplier sites interface import program that errored out:
REP-1419: 'beforereport': PL/SQL program aborted.
I have searched Metalink where they said the Batch Size should be 1000 by default. I did the same but still did not work.
I have made sure that teh vendor_id, vendor_site_code, org_id combination is unique.
I am not sure why I am getting this record. I have to process around 300000 records. When I ran the import progam the first time, it errored out after processing 171000 records. Then when I ran the program again for new records(that were not imported) it errored out after processing 42000 records. I dod not know how to resolve this issue.
Please help!!
Swati

Please check if the following notes are applicable to the issue:
Note: 369443.1 - Supplier Sites Open Interface Import Errs With Rep-1419 Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369443.1
Note: 369913.1 - Supplier Open Interface Import (APXSUIMP) Errors: Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369913.1

HT5052 I have been trying to upate my ipod to 5.0.1, but every time i get an error message of the server timed out after downloading for over an hour. My broadband speed here is is 1.5mbs, not good any help?

I have been trying to update my ipod to the 5.0.1 but after waiting for a hour for the download i get an error message that the server has timed out as my broadband speed is not good, could this be the problem and if so how can i get the update?

I have the same problem I disable msconfig mode all the programs escept windows and apple products but the same error appears at the last second of downloading the update

HTTP error 500 on Content Server test (RSCMST), after CS migration.

Hello all,
I have migrated a Content Server 6.30 system from HP-UX and MaxDB 7.3.00.42 to CS 6.40 on Windows and MaxDB 7.7.06.15. While the migration of the database and the install of the CS 6.40 seems to have completed successfully, I am having trouble connecting to it from the R/3 system.
Following some clean up steps suggested by SAP support, I am able to connect to the CS system using the "serverInfo" query, and I am also able to connect to the existing repository through CSADMIN. However, when I run the RSCMST tests, they all fail with the error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0".
Below is a summary of the tests/connections that work and the ones that do not.
URL for serverInfo: http://<hostname>:1090/ContentServer/ContentServer.dll?serverInfo - Returns successfully and displays status of CS.
CSADMIN - All tabs on csadmin display correct information, from the CS and respository.
SE38 - program=RSCMST - All tests return the following error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
I have also confirmed that I am using the most recent ODBC driver on this CS(at the request of SAP support), with the command sdbregview -l. - Returns the following: ... ODBC g:/sapdb/programs 7.7.06.15 64 bit valid ...
If anyone has any suggestions on what else I can check for this error, I would greatly appreciate it. Thanks in advance.
Regards,
Rusty Robbins

Well, I have good news to report... finally!
The main problem I had with the 500 error was caused by an incorrect version of MaxDB, for CS 6.40 (as SAP support pointed out in the message I had opened with them). Once I had completed the migration using MaxDB 7.6.06.05, I was able to connect successfully.
When I first performed this migration (with 7.6.06.05), I "thought" I was still getting the same 500 - internal error, but after looking at it closer I realized that the error had changed to say something like "table is set to read-only". I then realized that I had forgotten to perform a full data backup, following the last import. Once I completed this backup, I was able to connect to this CS system from R/3, with all of the test programs (RSCMST, etc).
Just to be sure, I performed this migration from scratch again, and was able to repeat the successful migration and tests. I have now turned it over to the functional teams for testing, and hopefully they will not find any issues. ;p
Thanks to all that responded and to those that reviewed this post!
Regards,
Rusty Robbins

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

[SOLVED] error: Resolving timed out after 10000 milliseconds

EDIT: it was a DNS lookup problem. I don't know why but it is better to manually specify nameservers in resolv.conf than in the home router control panel (a NETGEAR DGN2200v3). See the #3 post.
Hi
I just installed arch and I need to downgrade to xorg 1.12 to be able to use catalyst proprietary driver (legacy).
As I read into the wiki, I added the two required repos:
[catalyst-hd234k]
Server = http://catalyst.wirephire.com/repo/catalyst-hd234k/$arch
[xorg112]
Server = http://catalyst.wirephire.com/repo/xorg112/$arch
when I try to do an update, I get "database file does not exist".
In logs appears a curl error 28, timeout error, but the repository is online (I can ping it and I can browse its contents with firefox).
What can I do?
sudo LANG=C pacman -Syy
warning: database file for 'xorg112' does not exist
warning: database file for 'catalyst-hd234k' does not exist
:: Synchronizing package databases...
error: failed retrieving file 'xorg112.db' from catalyst.wirephire.com : Resolving timed out after 10000 milliseconds
error: failed to update xorg112 (download library error)
error: failed retrieving file 'catalyst-hd234k.db' from catalyst.wirephire.com : Resolving timed out after 10000 milliseconds
error: failed to update catalyst-hd234k (download library error)
core 105.0 KiB 122K/s 00:01 [######################] 100%
extra 1412.9 KiB 418K/s 00:03 [######################] 100%
community 1929.7 KiB 447K/s 00:04 [######################] 100%
multilib 95.7 KiB 115K/s 00:01 [######################] 100%
Last edited by yell! (2013-03-10 14:16:22)

yell! wrote:
thanks for replying. I edited the first post.
Solved:
After a lot of hours trying wget, aria2 and curl, with a lot of options, I just stopped observing pacman output behaviour in the console.
Seemed that it was a DNS lookup problem but, in my resolv.conf, the specified nameserver was my home router.
Anyway, I changed that specifying google's nameservers; is working now. It's a weird thing because in my homerouter I was already using google's nameservers.
Now I can open the repos in browser without lag.
Example of my resolv.conf:
Before:
# home router nameserver
nameserver 192.168.0.1
After:
#Google nameservers
nameserver 8.8.8.8
nameserver 8.8.4.4
Thanks you help me so much love you

[Solved] xorg server & keyboard conf error messages after upgrade

I ran my daily upgrade (today was big, from FF to the kernel to xorg) and I was not able to login on GDM afterwards.
It's weird. The X server will start, and so will the GDM login screen. But entering the password will result in a GDM crash (I later found out that KDM and SLIM have the same issue; KDM not starting and SLIM refusing the keyboard input). So after starting an alternate console and trying to start x (startx), I have this error message:
"Th e XKEYBOARDMAP keymap compiler (xbcomp) reports:
Error: Cannot close "/tmp/server-0.xkm" properly (not enough space?)
Output file "/tmp/server-0.xkm" removed
Errors from xkbcomp are not fatal to the X server
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices "
I have been fiddling with the keyboard config on xorg.conf but I'm not sure I'm getting anywhere. Also, I downgraded the xorg-server and xkeyboard config packages just to be sure.
Any clue?
Thanks!
Last edited by southerncross (2012-07-24 15:46:38)

Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks!

DBUA errors out after collecting server information

Similar Messages

Maybe you are looking for