[Solved] pacman errors out after a hardlock
Hi, I experienced a hardlock today due to a bad memory stick during a pacman update. Now pacman tells me this (with --debug):
looking for inter-conflicts...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package openoffice-base-3.1.0-1
debug: returning error 33 from compute_download_size : package filename is not valid
error: failed to prepare transaction (package filename is not valid)
I deinstalled openoffice-base but I still get the same error.
Oh I think I found the culprit, in /var/lib/pacman/sync/extra/openoffice-base-3.1.0-1/ all files are empty.
I'm removing this directory now...
execute pacman -Syu again
still doesn't work
someone on IRC suggests pacman -Syy, this forces a synchronization of the database
I did that and now I do pacman -S openoffice-base.
This works, it's downloading openoffice-base from one of the mirrors now.
I thought I'd share this.
Thanks for sharing, I'm sure it'll help out someone in the future.
Similar Messages
-
BPEL Console errors out after 10.1.3.4 MLR#9 8589928 upgrade
BPEL Console is completely down after upgrading from 10.1.3.3 to 10.1.3.4 using patchset# 7272722 and on top of it applying the MLR#9 8589928 patch. It errors out as follows:-
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Sat Aug 29 23:33:27 PDT 2009
Build type: release
Source tag: PCBPEL_10.1.3.4.0MLR9_GENERIC_RELEASE
Exception Message:
javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
Any expedited response/answers to resolve this issue is very much appreciated as it is mission critical for us to bring up the environment for significant development tasks immediately. Thx!
Edited by: user11995464 on Oct 11, 2009 1:58 AMThis kind of problems have been observed earlier. May be some of the previous posts in this forum can help you
SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch
http://blogaodosoa.blogspot.com/2009_04_01_archive.html -
Tab Page Errors out after migration to new instance
Hi All,
Tab Pages are running well in test instance but when I migrate it to dev instance then
On click of a particular tab that page errors out.
ERROR STACK
## Detail 0 ##
java.lang.NullPointerException
at exl.oracle.apps.per.eexit.webui.EmployeeUpdateCO.processRequest(EmployeeUpdateCO.java:228)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanConta
[2096]:UNEXPECTED:[fnd.framework.webui.OAPageErrorHandler]:inerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2336)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1735)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
at oa_html._OA._jspService(_OA.java:84)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
java.lang.NullPointerException
at exl.oracle.apps.per.eexit.webui.EmployeeUpdateCO.processRequest(EmployeeUpdateCO.java:228)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2336)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1735)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
at oa_html._OA._jspService(_OA.java:84)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
In PR in EmployeeUpdateCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
String requestParams = pageContext.getParameter("partyNumber");
if ("AlreadyDeleted".equals(requestParams))
System.out.println("Above through already deleted Employee Exception");
OAViewObject disVO = (OAViewObject)am.findViewObject("DisabledPVO1");
if(disVO !=null)
disVO.first();
disVO.getCurrentRow().setAttribute("XXDisabled", Boolean.TRUE);
//throw new OAException("This Employee has already been deleted. Please click on Home Link to come out from this page.", OAException.ERROR) ;
//EXL_EEXIT_ALREADY_DEL//on 20.10.09
throw new OAException("EXL","EXL_EEXIT_ALREADY_DEL");
String employeeNumber = pageContext.getParameter("partyNumber");
if (employeeNumber !=null)
OAViewObject disVO = (OAViewObject)am.findViewObject("DisabledPVO1");
if(disVO !=null)
disVO.first();
disVO.getCurrentRow().setAttribute("XXDisabled", Boolean.TRUE);
//throw new OAException("Employee Resignation has been reversed sucessfully", OAException.CONFIRMATION);
throw new OAException("EXL","EXL_EEXIT_RESIGN_REV");
else
System.out.println("In the else condition of EmployeeCO");
System.out.println("Before disabling Reinitiate Button");
OAViewObject disvotest = (OAViewObject)am.findViewObject("testVO1");//(XXJADisabledPVO1);
System.out.println("Value of testVO1"+disvotest);
if(disvotest != null)
disvotest.first();
//System.out.println("before falsing");
disvotest.getCurrentRow().setAttribute("testnew", Boolean.TRUE);//erroring out here....
//System.out.println("after falsing");
System.out.println("After disabling Reinitiate Button");
if (!pageContext.isFormSubmission())
am.invokeMethod("initQuery", null);
am.invokeMethod("InitUpdateLov", null);
am.invokeMethod("renderJAPage");
am.invokeMethod("renderSupPage");
System.out.println("Calling New Method");
am.invokeMethod("XXrenderSupPage");
am.invokeMethod("disabledRadioButton");
am.invokeMethod("disabledNoticeRadioButton");
String UserId = pageContext.getEmployeeId()+"";
String AUserId = pageContext.getUserId()+"";
System.out.println("Anil EmployeeID is "+UserId);
System.out.println("Anil EmployeeID1 is "+AUserId);
Serializable[] personid = {UserId};
// Commented on 27 May
String userId = (String)am.invokeMethod("getEmployeeNumber", personid);
String userName= pageContext.getUserName();
System.out.println("USER NAMe is "+userName);
System.out.println("userId in CO is "+userId);
Serializable[] params = {userId};
System.out.println("calling LOV in UpdateCO");
am.invokeMethod("XXhandleMyLovUpdateEvent", params);
System.out.println("Method Called in UpdateCO");
// end here 09 june
//end here code of Radio Button
//==> //OAViewObject vo = (OAViewObject)am.findViewObject("EmployeeEOVO1");
//am.invokeMethod("test");
OAViewObject vo = (OAViewObject)am.findViewObject("EmpUpdateEOVO1");
System.out.println("ROw COUNT IN EMPLOYEEUPDATE CO IS "+vo.getFetchedRowCount());
if (vo != null && vo.getFetchedRowCount()>0)
System.out.println("InsidePR of RADIO BUTTON");
// vo.reset(); //New line added
// vo.next(); //new line added
OARow row = (OARow)vo.getCurrentRow();
String email = row.getAttribute("NoticePayBuyoutFlag")+"";
String email1 = row.getAttribute("JoiningBonusFlag")+"";
String email2 = row.getAttribute("RelocationBonusFlag")+"";
String email3 = row.getAttribute("ServiceAgreementFlag")+"";
String email4 = row.getAttribute("NoticePayAdjustedPl")+"";
String email5 = row.getAttribute("NoticePayWithoutAdjustedPl")+"";
System.out.println("RADIO BUTTON VALUE IS "+email);
System.out.println("RADIO BUTTON VALUE IS "+email1);
System.out.println("RADIO BUTTON VALUE IS "+email2);
System.out.println("RADIO BUTTON VALUE IS "+email3);
System.out.println("RADIO BUTTON VALUE IS "+email4);
System.out.println("RADIO BUTTON VALUE IS "+email5);
row.setAttribute("NoticePayBuyoutFlag","NW");
row.setAttribute("JoiningBonusFlag","NW");
row.setAttribute("RelocationBonusFlag","NW");
row.setAttribute("ServiceAgreementFlag","NW");
row.setAttribute("NoticePayAdjustedPl","NW");
row.setAttribute("NoticePayWithoutAdjustedPl","NW");
Thanks,
Sombit...OAViewObject disvotest = (OAViewObject)am.findViewObject("testVO1");
System.out.println("Value of testVO1"+disvotest);
if(disvotest != null)
if(disvotest.getFetchedRowCount()>0)
disvotest.first();
disvotest.getCurrentRow().setAttribute("testnew", Boolean.TRUE);
Also double check VO should have this VO Attribute.
Thanks
--Anil -
LR 2.2/2.3 errors out after every 15-20 image imports
I've seen several topics in the forums discussing errors when exporting images out of LR but I have been experiencing issues during the import process.
I was running LR 2.2 on Mac OS 10.5.6 without any issues. When 2.3RC was released, I addded it on and used it for a few days. It was very buggy so I deleted it and started using 2.2 again. Last night, I went to import the first batch of images (in 2.2) since deleting 2.3RC and got an error message which killed the import process. Now, I totally apologize but I do not have the actual error message to provide but I think it was something along the lines of LR not being able to find a location of sorts.
I assumed that this was a fluke and restarted the import (minus the images that were already imported into the catalog) and the same error occurred after another 20 or so images.
Is it safe for me to assume that this is related to the memory leak issue that others are posting about when exporting? Also, is it possible that some remnants of 2.3RC are in use even though I deleted the actual application? Should I remove all instances of the app and re-install?
Thanks for any help!
BrianI hadn't imported many files using 2.3RC so I just tried it.
306, Nikon D300 NEF files imported from internal disk
MacBook Pro ('unibody')
The operation took 1 minute 10 seconds excluding the time to create the standard profiles. -
Expense request getting errored out after Expense approver rejected
Dear Experts,
I am facing issues where employee expense request is getting errored out when the expenses approver reject the Request.
We are using a workflow to move this request.
Once the employee submitted the expense request. We are having 2 level approval of his/her. Supervisor at the 1st and Expense approver at 2nd level
In the 2nd phase the Expense approver rejecting the travel request to make modifications, however the rejected request is NOT routing back to the employee.
Any assistance highly appreciatedHi Venkat,
Many thanks for your reply
The required work flow is properly configured. I can see after rejection it has been routed to the employee again.
However after rejection its getting errored out, any idea on the possible reasons, does er approver is selecting or inputing any incorrect parameters.
Regards,
Tamiz -
DBUA errors out after collecting server information
Hi,
We are in the process of upgrading Oracle Database from 9i to 11g on AIX 6.1. After installing the Oracle Software 11g (11.2.0.1) we try to run the DBUA but after showing the screen collecting server information a blank page appears (with no error code) after which the DBUA stops.
Please any hints or any comments.
Thanks.There are a few oracle notes which may help :
DBUA Fails With a Screen Showing 'Null' [ID 1285052.1]
Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1]
11.2.0.1 Catupgrd.sql Hangs While Running Procedure POPULATE_DBID_AUDIT [ID 1062993.1]
Best Regards
mseberg
Edited by: mseberg on Aug 10, 2011 8:02 AM -
[SOLVED] Pacman error when installing Arch from installation cd
Hey I''ve been checking the wiki, forum and even google and I've found some responses but they don't seem to apply to my problem and I just need a little help.
I'm at the 4th step "Select Packages" and when I select it I get "Pacman preparation failed! Check /dev/tty7 for errors"
the error on tty7 is "pacman: error while loading shared libraries: /usr/lib/libalpm.so.4: cannot read file data: Input/output error"
I apologize if this is an easy fix but its been almost a year since I've used arch and I'm a bit spoiled with ubuntu.
****The cd was outdated. Burning a new copy fixed it*****
Last edited by Rabbit (2012-01-03 01:40:33)I'm afraid it might be too old. I'm going to try to burn a new copy tomorrow when I can borrow a friends computer. I just wanted to make sure I wasn't missing something real simple before I gave up.
-
How to Solve "General Error: Out of memory"
Hi all experts,
I have this "weird" error which I encountered for the first time.
I converted a AVCHD file from my SD card (in mts) to .mov format using clipwrap. I played the resultant .mov file using Quick Time and it plays smoothly without any problem.
Now, I imported this .mov into FInal Cut and it appears into my project panel. Then I click on this file expecting to see the video in the Viewer Window but it doesn't. Instead, an message saying "General Error: Out of Memory" appeared on the Viewer Window.
Then, I tried another method by draggin rhis file from the project panel straight into the timeline. When I put my CTI onto it in the timeline, the video appears on the Canvas window but when I press the spacebar, the movement of the video is very jerky.
Both the sequence settings on the video & sequence are matching at 1920 x 1080.
Any idea what is going on ?
ThanksMartinR wrote:
Did you convert the AVCHD video to QuickTime using _Apple Intermediate Codec (AIC)?_
(.mov files are QuickTime, but the video codec inside would be H.264 if all you did in Clipwrap was convert .mts to .mov without also specifying conversion to Apple Intermediate Codec. A QT/H.264 video file would be playable in QuickTime but could not be edited in FCE. Needs to be QT/AIC.)
Suggest checking (and let us know) what your clip & sequence properties are.
Thanks Martin.
And you are right ! The clip converted from clipwrap is QT/H.264. But how do I instruct Clipwrap to convert it to QT/AIC ?
Also, how come Final Cut classified this as an "Out of Memory" error ?
Thanks -
[Solved] Pacman error after incomplete upgrade
Hi
I was updating my archlinux when my X11 crashed (I was restarting it after tweaking my gnome 3) .
Trying to update after that indicated that my system was already uptodate. Installing anything indicated that pacman was running else to delete a file /var/lib/pacman/db.lck , which I did.
Now I can install but get these errors (for an example of re-installing pacman):
pacman -S pacman
warning: pacman-3.5.4-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/xulrunner-6.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/xulrunner-6.0-1/desc: No such file or directory
Targets (1): pacman-3.5.4-3
Total Download Size: 0.00 MB
Total Installed Size: 2.87 MB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading pacman [######################] 100%
ldconfig: file /usr/lib/xulrunner-6.0/libxul.so is truncated
Can any one help me? I am clueless. I know I made a mistake ... will be careful next time. Also I am sure that my system is not upto date, though pacman indicates it is.
Last edited by jlight2011 (2011-08-17 12:00:19)No luck mate!
I get the following
pacman -Syy
:: Synchronizing package databases...
core 35.6K 1413.9K/s 00:00:00 [#######################################################] 100%
warning: resuming download of extra.db not possible; starting over
error: extra.db appears to be truncated: 485471/485689 bytes 176.0K 289.1K/s 00:00:01 [####################-----------------------------------] 37%
error: failed to update extra (failed to retrieve some files)
multilib 26.5K 204.0M/s 00:00:00 [#######################################################] 100%
I tried copying the extra.db file directly from my repo to the folder. But get the same error! -
(SOLVED) Pacman error: GPGME does not exist
Hi, I have also just been struck with the same issue - a broken pacman (and for no reason that I can fathom). Was working perfectly yesterday and all I did that wan't usual was to uninstall clamav.
Anyway, I have read this post and done a pacman -Syy, which upgraded core and archlinuxfr only. I then ran pacman -Syu and received this:
[grant@ARCH ~]$ sudo pacman -Syy
[sudo] password for grant:
error: GPGME error: No data
error: GPGME error: No data
error: GPGME error: No data
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
core 106.2 KiB 353K/s 00:00 [######################] 100%
error: GPGME error: No data
error: failed to update extra (invalid or corrupted database (PGP signature))
error: GPGME error: No data
error: failed to update community (invalid or corrupted database (PGP signature))
error: GPGME error: No data
error: failed to update multilib (invalid or corrupted database (PGP signature))
archlinuxfr 30.3 KiB 81.9K/s 00:00 [######################] 100%
error: database 'extra' is not valid (invalid or corrupted database (PGP signature))
error: database 'community' is not valid (invalid or corrupted database (PGP signature))
error: database 'multilib' is not valid (invalid or corrupted database (PGP signature))
[grant@ARCH ~]$
Should I do a reinstall of pacman using the CD? I know this is clumsy, but anything I have missed?
Last edited by mcduling (2012-12-03 06:43:56)Here is my pacman.conf in separate screens:
GNU nano 2.2.6 File: /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
GNU nano 2.2.6 File: /etc/pacman.conf
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
GNU nano 2.2.6 File: /etc/pacman.conf
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
GNU nano 2.2.6 File: /etc/pacman.conf
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
GNU nano 2.2.6 File: /etc/pacman.conf
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
GNU nano 2.2.6 File: /etc/pacman.conf
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[multilib]
#SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
# An example of a custom package repository. See the pacman manpage for
GNU nano 2.2.6 File: /etc/pacman.conf
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs -
[SOLVED] Pacman not working after updating.
While I'm trying to resolve issue "package-query: requires pacman<3.6", I did wrong that entering "pacman-key --init" right after upgrading pacman. Now it neither upgrade nor install programs.
pacman -Syu
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirrors.kernel.org : Could not resolve host: mirrors.kernel.org; Name or service not known
error: failed retrieving file 'core.db' from mirror.yandex.ru : Could not resolve host: mirror.yandex.ru; Name or service not known
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from mirrors.kernel.org : Could not resolve host: mirrors.kernel.org; Name or service not known
error: failed retrieving file 'extra.db' from mirror.yandex.ru : Could not resolve host: mirror.yandex.ru; Name or service not known
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from mirrors.kernel.org : Could not resolve host: mirrors.kernel.org; Name or service not known
error: failed retrieving file 'community.db' from mirror.yandex.ru : Could not resolve host: mirror.yandex.ru; Name or service not known
error: failed to update community (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# PGP signature checking
# NOTE: None of this will work without running `pacman-key --init` first.
# The compiled in default is equivalent to the following line. This requires
# you to locally sign and trust packager keys using `pacman-key` for them to be
# considered valid.
#SigLevel = Optional TrustedOnly
# If you wish to check signatures but avoid local sign and trust issues, use
# the following line. This will treat any key imported into pacman's keyring as
# trusted.
#SigLevel = Optional TrustAll
# For now, off by default unless you read the above.
SigLevel = Never
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
#SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Last edited by bilgee0629 (2012-02-06 13:34:40)Gcool wrote:
Could you post the output of the following commands:
* ifconfig -a
* cat /etc/resolv.conf
* ping mirrors.kernel.org
* ping 8.8.8.8
* tail -50 /var/log/pacman.log
1)
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet6 fe80::ea9a:8fff:fe63:6190 prefixlen 64 scopeid 0x20<link>
ether e8:9a:8f:63:61:90 txqueuelen 1000 (Ethernet)
RX packets 6820 bytes 1956857 (1.8 MiB)
RX errors 48 dropped 1 overruns 0 frame 46
TX packets 3693 bytes 398312 (388.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 1 collisions 48
device interrupt 43
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 26 bytes 2052 (2.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 26 bytes 2052 (2.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1492 metric 1
inet 49.0.145.198 netmask 255.255.255.255 destination 8.8.8.8
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 3103 bytes 1539691 (1.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3589 bytes 312371 (305.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4098<BROADCAST,MULTICAST> mtu 1500 metric 1
ether d0:df:9a:30:2d:8e txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
2)
nameserver 202.72.241.5
nameserver 203.34.37.3
3)
PING mirrors.us.kernel.org (149.20.4.71) 56(84) bytes of data.
64 bytes from mirrors2.kernel.org (149.20.4.71): icmp_req=1 ttl=53 time=241 ms
64 bytes from mirrors2.kernel.org (149.20.4.71): icmp_req=2 ttl=53 time=242 ms
64 bytes from mirrors2.kernel.org (149.20.4.71): icmp_req=3 ttl=53 time=242 ms
^C
--- mirrors.us.kernel.org ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 241.653/242.080/242.345/0.504 ms
4)
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_req=1 ttl=255 time=10.3 ms
64 bytes from 8.8.8.8: icmp_req=2 ttl=255 time=11.4 ms
64 bytes from 8.8.8.8: icmp_req=3 ttl=255 time=210 ms
64 bytes from 8.8.8.8: icmp_req=4 ttl=255 time=7.34 ms
64 bytes from 8.8.8.8: icmp_req=5 ttl=255 time=10.6 ms
^C
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 7.349/50.062/210.542/80.252 ms
5)
[2012-02-06 17:58] Running 'pacman -Rdd package-query'
[2012-02-06 17:59] removed package-query (0.9-1)
[2012-02-06 17:59] Running 'pacman -Syu'
[2012-02-06 17:59] synchronizing package lists
[2012-02-06 18:11] upgraded linux-api-headers (3.0.1-1 -> 3.1.6-1)
[2012-02-06 18:11] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2012-02-06 18:11] Generating locales...
[2012-02-06 18:11] en_US.UTF-8... done
[2012-02-06 18:11] en_US.ISO-8859-1... done
[2012-02-06 18:11] Generation complete.
[2012-02-06 18:11] upgraded glibc (2.14-6 -> 2.15-4)
[2012-02-06 18:11] upgraded libarchive (2.8.5-2 -> 3.0.3-3)
[2012-02-06 18:11] installed pth (2.0.7-4)
[2012-02-06 18:11] installed gnupg (1.4.12-1)
[2012-02-06 18:11] installed libksba (1.2.0-1)
[2012-02-06 18:11] installed libassuan (2.0.3-1)
[2012-02-06 18:11] installed pinentry (0.8.1-3)
[2012-02-06 18:11] installed dirmngr (1.1.0-3)
[2012-02-06 18:11] installed gnupg2 (2.0.18-1)
[2012-02-06 18:11] installed gpgme (1.3.1-2)
[2012-02-06 18:11] >>> Run `pacman-key --init` to set up your pacman keyring.
[2012-02-06 18:11] upgraded pacman (3.5.4-4 -> 4.0.1-4)
[2012-02-06 18:12] Running 'pacman -S firefo'
[2012-02-06 18:13] Running 'pacman -S firefox'
[2012-02-06 18:13] Running 'pacman -S package-query'
[2012-02-06 18:13] Running 'pacman -Syu'
[2012-02-06 18:13] synchronizing package lists -
[SOLVED] pacman times out
Hi, I'm new to arch, but have used ubuntu for a while now.
New installation, and when I run pacman -Syu, it says the following
#pacman -Syu
:: Synchronizing package databases...
error: failed retrieving file `core.db.tar.gz` from mirror.pacific.net.au : Connection timed out
error: failed to synchronise code: Connection timed out
Also, I think my network is set up correctly as I can ping google.com
I am using a wired connection with dhcp.
Do I need to edit the resolv.conf, and the hosts files, I am not sure what needs to go in these files.
I installed from the 2008.06 core i686 iso.
Thanks in advance
EDIT:
view http://bbs.archlinux.org/viewtopic.php?id=56376 for solution to problem
Last edited by bensmith87 (2008-11-14 21:11:56)Thanks again for all your help Xyne,
I am trying the install from within Ubuntu, and it isn't looking good.
I needed to follow http://wiki.archlinux.org/index.php/Ins … ting_Linux instead of the link you posted because of pacman.static being removed or something.
Anyway, it is still timing out
I don't know what to do, I don't think it can me my connection, as it seems to be working well for everything else.
Also, I read this in the wiki guide, and was curious, I'm not using x86_64.
You may want to manually resolve DNS in the /etc/pacman.d/mirrorlist, because pacman-static for i686 may not be able to get address information on x86_64 systems.
mirrorlist
# Arch Linux repository mirrorlist
Server = ftp://ftp.iinet.net.au/pub/archlinux/$repo/os/i686
Server = http://ftp.iinet.net.au/pub/archlinux/$repo/os/i686
# North America
# - United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
#Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
#Server = http://archlinux.unixheads.org/$repo/os/i686
#Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
#Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
#Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
#Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
#Server = http://mirror.neotuli.net/arch/$repo/os/i686
#Server = http://mirror.rit.edu/archlinux/$repo/os/i686
#Server = http://mirror.umoss.org/archlinux/$repo/os/i686
#Server = http://schlunix.org/archlinux/$repo/os/i686
# - Canada
#Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
# South America
# - Brazil
#Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
#Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
#Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
#Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
#Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
#Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
#Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
#Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
#Server = http://mir.archlinux.fr/$repo/os/i686
#Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp.rez-gif.supelec.fr/Linux/archlinux/$repo/os/i686
# - Germany
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
#Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
#Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
#Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
#Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
#Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
#Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
#Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
#Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
#Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Norway
#Server = http://arch.likbilen.com/$repo/os/@carch
# - Poland
#Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
#Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
#Server = http://unix.net.pl/archlinux.org/$repo/os/i686
# - Portugal
#Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
#Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
#Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
#Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
#Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
#Server = http://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
#Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
#Server = ftp://hell.org.ua/archlinux/$repo/os/i686
#Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
#Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# - Vietnam
# Domain name is ftp.indochinalinux.com but there are frequent DNS problems
#Server = ftp://202.78.230.5/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686
pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs -
[SOLVED] Pacman errors
Hello,
I've been trying to install fluxbox on my freshly installed arch linux (with updates) and I've been following a guide on how to do so. The problem is that I can't really install anything but 'pacman -S xorg', like for example if I try 'pacman -S hwd' I get this error:
http://rs51gc.rapidshare.com/files/1985 … G_1785.JPG
and this happens to pretty much every package that I've tried.
I've googled a lot and I've found some suggestions but none have worked =/
Please help.
Thanks.
Last edited by loxaXcracker (2009-02-16 11:44:20)loxaXcracker wrote:
Nvm guys, I've figured out what the problem was.
(edit in rc.conf (change to eth0="dhcp") and then simply restart the network.)
Thanks for the help anyway guys!
Glad to hear that Add [SOLVED] in the topic. -
[SOLVED] Pacman errors/weirdness
Hi, I recently installed Arch Linux on my PC. I have had experience with the Arch Linux distribution before so I roughly knew what I was doing. When I sucessfully installed Arch Linux I logged on and setup my wireless connection. After that I updated my system with:
pacman -Syu
It told me that there was an update for Pacman, but I wanted to update my system first of all so I skipped it. It installed during the package update process anyway. When it installed the new pacman version it created a new "mirrorlist" file as "mirrorlist.pacorig", so I deleted the old one and renamed the new one. But it seems to be having some bother, it is going really slow (probably nothing to do with the "mirrorlist" file) and it is detecting that I have a newer version of some packages than in the repositories. Why is this?
I apoligise if this is just a small error on my end but it was really fast before this update and functioning really well.
EDIT: I will reinstall my system just incase I have done something wrong somewhere.
Last edited by john.meikle37 (2009-01-03 22:02:16)john.meikle37 wrote:
Hi, I recently installed Arch Linux on my PC. I have had experience with the Arch Linux distribution before so I roughly knew what I was doing. When I sucessfully installed Arch Linux I logged on and setup my wireless connection. After that I updated my system with:
pacman -Syu
It told me that there was an update for Pacman, but I wanted to update my system first of all so I skipped it. It installed during the package update process anyway. When it installed the new pacman version it created a new "mirrorlist" file as "mirrorlist.pacorig", so I deleted the old one and renamed the new one. But it seems to be having some bother, it is going really slow (probably nothing to do with the "mirrorlist" file) and it is detecting that I have a newer version of some packages than in the repositories. Why is this?
I apoligise if this is just a small error on my end but it was really fast before this update and functioning really well.
EDIT: I will reinstall my system just incase I have done something wrong somewhere.
There's nothing wrong. You need to comment out, or move ftp.archlinux.org to the bottom of the list. It's heavily throttled so people don't use it as their primary server. Unfortunately, there really isn't a good way to have a default server list. So, find mirrors close to where you live, move them up to the top of the list, move archlinux way down or off of the list, and everything will be fine. -
[SOLVED] Pacman error: failed retrieving file : No address record
I just installed Arch on a x86 laptop using the cd as the package source. I wanted to do a net install, but when I attempted to (regardless of the mirror) I got many responses from pacman in tty7 of "No address record". This happened despite having a network connection and being able to ping any site from the cli.
After installing, I am still having the same problem. The laptop is plugged in via ethernet, and I can ping any site I want, but a call to pacman -Syyu just returns numerous errors such as
error: failed retrieving file 'core.db' from mirror.rit.edu : No address record
And just as a test, I was getting replies when pinging mirror.rit.edu.
Last edited by process91 (2011-11-18 18:21:17)Try the following steps:
1 - Set the VirtualBox Networking option to NAT
2 - Start the arch machine in the VirtualBox
3 - Edit /etc/rc.conf as a dynamic IP:
HOSTNAME="arch"
interface=eth0
address=
netmask=
broadcast=
gateway=
4 - Run dhcpcd
5 - Try to ping a couple of sites, or your router
If you still can't ping or anything, I suggest you start a new thread specifically about your problem. Include the output from "ipconfig -a". You're not going to get much help from posting in a thread marked "[SOLVED]".
Last edited by process91 (2012-01-18 07:21:14)
Maybe you are looking for
-
Re: To obtain values from fields in a web page.
Pamella -- Thank you for the detailed response. In order to solve your problem, you must do two things: 1) convert your field widgets to HTML elements via WindowConverter::FieldToElement( ... ) 2) grab the information you want from the incoming reque
-
Batch file to deactivate photoshop
Would there be poissible to have a batch file to deactivate (possibly activate) Photoshop on a machine? Thank you!
-
IDoc string field to JDBC date field - Not working
Hello everyone, Once again I must ask you something that is keeping me.. I had a interface type RFC ASync to JDBC SQL Server, it was working fine. Then, I was asked to change to a type iDoc ASync to JDBC SQL Server. At first, it was not a problem, ju
-
Hi, i Would like to know if its possible in Flash IOS to make a Virtual Joystick that only can move left and right and does something when the joystick is pulled in a certain direction like if the joystick was pulled left it would play the left walki
-
i have enough memory on my pc but it will not download i have never downloaded the trial before...it keeps saying error 105..????? please help