Dbx forward reference not defined (for templated variable)

I get the 'forward reference not defined' message very frequently when working with the Forte 6.1 C++ compiler and workshop. On the one occasion the variable wasn't an instance of a templated class, doing module <file>.cc fixed the problem. But what do I do for templated variables? Issuing the module command on the header file where they are defined doesn't work. It's very annoying, because it means that most of the time I can't inspect templated variables in the debugger.
Regards,
Martin.

Haven't seen this myself but I saw this after some searching.
http://forum.brightcove.com/t5/Player-APIs/new-error-on-ContextMenuClipboardItems/td-p/228 6
Someone mentioned in the thread that compiling for FP10 as a workaround, can you try that.

Similar Messages

Item category RENN is not defined for this item

Hey SD experts,
I've created a sales order with free of charge and standard items.
Now, I'm trying to create a return order with reference to this sales order.
I got this error message: Item category RENN is not defined for this item.
I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
Why am I getting this error message then ?
Regards,
Bahia.

Dear Bahia,
Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
Once again check item category determination through VOV4 transaction for the combination of
Your returns order document type+Itemcategory group-->RENN.
I hope this will help you,
Regards,
Murali.

Order Reason ABC not defined for Order Type Retrun order

Hi
I am getting following " Message no. V1 899 " when i am doing return order without refernce .
Order reason is defined in customization but still we are getting the following message " Message no. V1 899 " /Order Reason E18 not defined for Order Type ZEF9.
Can any one help me
regards,
kiran

Hi Kiran
As you have created sales order with document type ZEF9 but you have not taken any reference document then go to VOV8 and select ZEF9 and maintain the order reason feild and then do the process
Regards
Srinath

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

Vendor is not defined for purchase organization

Dear Friends,
I am receiving this message :
"vendor is not defined for purchase organization "
What has to do in the system to avoid this message ?
Regards
Marco

Hi,
This is not a config problem,. so, you have extend the vendor to the respective purchase organization using T-code XK01 - create vendor as follows.
Type XK01
Vendor Code :________ (to be given)
Company Code : ______ (to be given)
Pur.organization : _____ (to be given)
Account Group : ______(to be given)
Reference :
Vendor code : ________ ( vendor code given)
Company code : _______ (company code given)
Pur.organization : _______(vendor created pur.org code given)
After fill the above data and press enter key and SAVE. The vendor extended to the respective (under reference data's) purchase organization.
Hope, it is useful for you.
Regards,
K.Rajendran

Error message: Ship-to party 1111 not defined for sales area 1000 01 50

Hi friends,
I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
When created SO, I got a error message saying " Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
Please advise where I missed configuration.
Thanks,
Linda
Edited by: LindaSAP on May 25, 2010 5:40 PM

Hi,
Please check the below links
Ship-to party not defined for sales area
"SHIP TO PARTY NOT DEFINED FOR SALES AREA "
Ship to party is not defined for sales area..
Ship-to party not defined for sales area
Ship-to party 147 not defined for sales area US DS 20
ship to party -sales area error
Regards
Senya

Ship-to party 1600 not defined for sales area 1000 10 20

Hi Friends,
I am making inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regards

in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

Excise modvat accounts not defined for 57FC transaction and excise group

Hi,
When creating a subcontracting challan through J1IF01 after the goods issue through 541,I am getting the following error.
*Excise modvat accounts not defined for 57FC transaction and 70 excise group*
*Message no. 8I402*
Thanks,
Kiran Bodla

Hi,
You need to first specify the Excise Accounts for the combination of Excise Transaction Type: 57FC and subtransaction Type '01'. LAter maintain the G/L accounts for the ETT 57FC and subtransaction type 01. Also, maintain the attributes for subcontracting and movement ytpe groups. Later maintain the number ranges accordingly. The below are the navigational paths for ur reference.
SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction
SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction
Hope this solution satisfies ur requirement
Regards,
Phani

"Transport zone is not defined for country US" error during sourcing

Hi Friends,
I have an issue that is happening when I transfer purchase reqs from ECC to SRM sourcing. We are on ECC 6.0 and SRM 5.5.
when there is a transport zone defined for a storage location for a certain plant, then transfer of that purchase req does transfer to SRM SOCO. I get a error "Transport zone MXXXXXX is not defined for country US".
DNL_CUST_BASIS3, Prod0, Prod1 have been replicated from ECC to SRM. It works if there is no Transport zone defined for a storage location.
SRM Org structure has Location and Storage locations defined that has Transport Zone and exists in ECC.
This is stopping me from moving forward with proper testing. Please advise or suggest anyresolution.
Thanks all
Viktor P

Dear Muthu,
Thanks for the reply. There is another Address spro setting in SRM - Address Management where Transport zones can be nmaintained. I have not tried this Tcode as I do not have authorization.
Thanks
Viktor

Sales area VNMH 01 02 is not defined for customers

Dear sir.
I have some questions, help me.
I'm creating a customer, but I have an error " Sales area VNMH 01 02 is not defined for customers".
I want to create plants, but I don't know the path.
Finanly, how to create branches, departments, storages
Help me deal the problem.
Thank you very much.
Regard,
Hangvt

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD AB AB
Common division
ABCD CD CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

Sales area ABCD CB AB is not defined for customers

Hi Guru,
              When I was trying to create customer T-CODE: XD01
Getting following error:
Sales area ABCD CB AB is not defined for customers
I am working on ECC6.
could you please help me out?
Regards,
sha

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD     AB     AB
Common division
ABCD    CD      CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

Customer Master Record :Sales area INSO IN IN is not defined for customer

Hi Experts
I got error , when creating Customer Master Record .The error message likes below
"Sales area INSO IN IN is not defined for customers" .I maintained all the settings .But why i am getting again and again the same error .Even i checkd in TVTA table in SM30 but is shows clear data , please tell me where i made mistake .
I traid so many times maintain with new configuration ,but still field .Please what i have to done to over coome this issue .
Your Suggestions needful to me .. Please
Issue Details :
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
Regards
Rajesh .P

Maintain relevant entries in t.code VOR1 and VOR2 and then try again. Here assign the distribution channels and divisions to reference distribution channel and division.

"Sales Area zzzz zz zz is not Defined for Customers"

Hi All
         I am trying to create a customer using XD01. In my org structure there is only one sales org, one dist channle, one division and hence One Sales Area zzzz zz zz which I have set up in IMG. The Error I am getting is
"Sales Area zzzz zz zz is not Defined for Customers"
And Peformance Assistant gives the following message
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
I have already checked that
1)My Sales area has been defined and Sales org is assigned to company code, Dist Channel and Division is assigned to Sales Org
2)In Table TVTA my Sales Area Exist...
3)I have tried creating my sales org by copying IDES sales org as well as creating a NEW sales org...however the error is still there
Any Ideas???
Thanks
Raj

Hi!
   This error is coming due to assinment is not made for common Divisions. You can assign this by going to SPRO>S&D>Define common divisions. Here you assign sales org ZZZZ , division ZZ, division for conditions ZZ, division for Customers ZZ. Then try to create customer master for ZZZZ ZZ ZZ .
This assignment for master data can be created in one sales area and that can be referenced to other sales areas also without creating again.Read the help below for details.
Define Common Divisions
     In this step, you define the divisions that common master data should
     apply to. The definition is valid within each sales organization.
     Example
     You can determine, for example, that the conditions which are valid in
     division "01" also apply to divisions "05" and "06".
     Note
     The common master data across various divisions refer to the conditions
     and the customer master data.
     You thus minimize the effort of entering and managing master data.
     In addition, you can extrapolate your own statistics per division
     without having to create master data in the different organizational
     subareas.
     Action
     For the divisions, define from which other division the master data
     should be copied.

My app went from working fine to: Id field not defined for cfc Path.to.my.ORMCfCPag when I restarted

Hi everyone,
I have a CF9 ORM problem that I haven't been able to figure out and thought I'd see if you had any idea. I have seen a few postings talking about a "similar" problem but none of them correctly resolved this particular issue. I appreciate any help you can offer.
I recently created a CF9 app where I generated scripted ORM CFCs for my app using ColdFusion Builder. It worked great and my app was completely working. However, when I was adding some enhancements, I ran into an error when I restarted the CF app server. Here's the message I keep getting:
"Id field not defined for cfc Path.to.my.ORMCfCPage. Either the table should have a PK column mapped to a cfc field OR at least one field should be specified as id."
My App.cfc file only had orm enabled (no other mappings) when it was working. I've since tried specifying things like the cfc location etc. and it still hasn't helped.
// MORE DETAILS:
- When my app was working, I had moved it to 2 other servers. I had this error on both of those but not on my local copy. They all use the exact same database.
- The last change I made before the error was adding a generator="identity" field to my generated ORM beans. Once I got the message, I tried changing it back and restarting again but still got the error.
- I've also made sure all of the Adobe tags are in my web root (as suggested in a prior posting about this problem). I've search all over for a solution and nobody has a solution posted online that works so far.
Do you have any idea why this is happening?
Thanks!
Jeff

Quick thought and probably not relevant, but do you have this.ormsettings.savemapping set to true in your Application.cfc? I've fallen foul of this before - once CF has generated the hbmxml files and saved them to disk you can make all kinds of changes to your code which won't make a difference as it'll continue to read from the file versions, but only for certain properties and methods at times it seems.
Long shot I know, but I found CF ORM to be a nightmare for seemingly random caching.

Dbx forward reference not defined (for templated variable)

Similar Messages

Maybe you are looking for