Customer Master Record :Sales area INSO IN IN is not defined for customer

Hi Experts
I got error , when creating Customer Master Record .The error message likes below
"Sales area INSO IN IN is not defined for customers" .I maintained all the settings .But why i am getting again and again the same error .Even i checkd in TVTA table in SM30 but is shows clear data , please tell me where i made mistake .
I traid so many times maintain with new configuration ,but still field .Please what i have to done to over coome this issue .
Your Suggestions needful to me .. Please
Issue Details :
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
Regards
Rajesh .P

Maintain relevant entries in t.code VOR1 and VOR2 and then try again. Here assign the distribution channels and divisions to reference distribution channel and division.

Similar Messages

  • SALES AREA MPPS MP LP IS NOT DEFINED FOR CUSTOMERS

    At present I am working on integration of FI module with SD.When I am tryng to create Customer Master Record I am getting the error message "SALES AREA MPPS MP LP is not defined for customers".MPPS , MP , LP are sales org,dist channel,division created by me.Plase give solution.

    Maintain common distribution channel & common division using transaction codes VOR1 & VOR2.

  • Sales area VNMH 01 02 is not defined for customers

    Dear sir.
    I have some  questions, help me.
    I'm creating a customer, but I have an error " Sales area VNMH 01 02 is not defined for customers".
    I want to create plants, but I don't know the path.
    Finanly, how to create branches, departments, storages
    Help me deal the problem.
    Thank you very much.
    Regard,
    Hangvt

    Hi
    Please Check Img>SD>master data-->Common dist. channel / division
    Your Sales org with dist. channel/division will refered by some other dist. channel/division.
    Kindly replace with urs.
    example:
    common dist. channel
    ABCD     AB     AB
    Common division
    ABCD    CD      CD
    Do like this and u will not get the error.
    here we are assisning common reference dist. channel/ division for a dist. channel/ division
    reward if helpfull
    Muthupandiyan

  • Sales area JI00 JI JI is not defined for customers

    i created enterprise struv for SD
    DIVISION     JI
    Plant     JI00
    Sales Organisation     JI00
    Dist Chan     JI
    Divi     JI
    Sales Office     JI00
    Sales Grp     JI0
    Stor Loca     JI00
    Shipping Point     JI00
    Company Code     0001
    and all necessary assignmnets done successfully and consistency chk also , it is OK'
    now i am creating custoemr in XD01 then i got an error as Sales area JI00 JI JI is not defined for customers
    pls guide me wat to do, i am not done any other settings except i mentioned

    Hi,
    please check the following customizing:                                                                               
    - transaction SPRO                                                                               
    > SAP Customizing Implementation Guide                                    
      > Enterprise Structure                                                  
        > Assignment                                                          
          > Sales and Distribution                                            
            > Assign sales office to sales area                                                                               
    > Sales and Distribution -> Master Data                                   
              > Define Common Distribution Channels and Common Division.                                                                               
    - Transactions need to also be checked and maintaained if neccessary:     
         -> OVXG:  Define sales area                                          
         -> VOR1:  Joint Master Data: Distr. Channel                          
         -> VOR2:  Joint Master Data: Distr. Division                         
    Kind regards,
    Zsuzsanna

  • Sales area ABCD CB AB is not defined for customers

    Hi Guru,
                  When I was trying to create customer T-CODE:  XD01
    Getting following  error:
    Sales area ABCD CB AB is not defined for customers
    I am working on ECC6.
    could you please help me out?
    Regards,
    sha

    Hi
    Please Check Img>SD>master data-->Common dist. channel / division
    Your Sales org with dist. channel/division will refered by some other dist. channel/division.
    Kindly replace with urs.
    example:
    common dist. channel
    ABCD     AB     AB
    Common division
    ABCD    CD      CD
    Do like this and u will not get the error.
    here we are assisning common reference dist. channel/ division for a dist. channel/ division
    reward if helpfull
    Muthupandiyan

  • "Sales Area zzzz zz zz is not Defined for Customers"

    Hi All
             I am trying to create a customer using XD01. In my org structure there is only one sales org, one dist channle, one division and hence One Sales Area zzzz zz zz which I have set up in IMG. The Error I am getting is
    "Sales Area zzzz zz zz is not Defined for Customers"
    And Peformance Assistant gives the following message
    Message no. F2644
    Diagnosis
    The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
    Procedure
    You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
    I have already checked that
    1)My Sales area has been defined and Sales org is assigned to company code, Dist Channel and Division is assigned to Sales Org
    2)In Table TVTA my Sales Area Exist...
    3)I have tried creating my sales org by copying IDES sales org as well as creating a NEW sales org...however the error is still there
    Any Ideas???
    Thanks
    Raj

    Hi!
       This error is coming due to assinment is not made for common Divisions. You can assign this by going to SPRO>S&D>Define common divisions. Here you assign sales org ZZZZ , division ZZ, division for conditions ZZ, division for Customers ZZ. Then try to create customer master for ZZZZ ZZ ZZ .
    This assignment for master data can be created in one sales area and that can be referenced to other sales areas also without creating again.Read the help below for details.
    Define Common Divisions
         In this step, you define the divisions that common master data should
         apply to. The definition is valid within each sales organization.
         Example
         You can determine, for example, that the conditions which are valid in
         division "01" also apply to divisions "05" and "06".
         Note
         The common master data across various divisions refer to the conditions
         and the customer master data.
         You thus minimize the effort of entering and managing master data.
         In addition, you can extrapolate your own statistics per division
         without having to create master data in the different organizational
         subareas.
         Action
         For the divisions, define from which other division the master data
         should be copied.

  • Problem in creating customer in new sales area

    Hi
    I am creating a customer in new sales area but system is not allowing but giving following message Sales area UKA1 U1 U1 is not defined for customers.
    In IMG, sales area UKA1 U1 U1 exists.
    How to resolve this problem?
    Thanks

    Dear Uttam,
    There are two ways to maintain Customer Master records:
    1. By creating master record for each Sales Area
    2. BY creating single master record & define common Distribution channels & Divisions.
    In second case e.g. you have two distribution channel & Divisions C1 & C2 and AA & BB respectively. You create a master record for C1 & AA & if you have defined the above Sales areas as common then you need create new master record for C2 & BB...
    These settings can be done at IMG - Sales & Dist - Master Data - Define Common Dist. Channel & Divisions.
    Hope this clears your doubt.. .
    Reward if useful...
    Thanks,
    Jignesh Mehta
    Mumbai
    98700 10230

  • Zfield is not apearing in the batch input session ( Customer Master Record)

    Hello,
    We have added one Z field in the customer master record (sales are tab). But this Z table not appear in the Batch Input session(SM35). My user want to update this field for all the customers at once, but this Z field not appearing even in MASS transaction.
    For your information, we have appended the KNVV table. Can any one of you give some suggestions on this.
    Regards,
    Srinivas.

    It's rather easy via a custom ABAP program to wait for the end of a batch input session. Some codes were already pubilshed (look whole SCN for APQI-QSTATE).
    What you can do is to select the sessions to be started via this custom program, and it will submit a job which will run in an endless loop until the last session is released. It might use a WAIT UP TO X SECONDS to sleep for a few seconds between each scan of session status.

  • SALES AREA IS NOT DEFINED FOR CUSTOMERS

    dear All,
    1.I got this error while creating Sales Order,
    "Ship to Party x is not defined for Sales Area".
    2. while creating Customer Master I got the following error.
      "Sales Area  xxxx  10  20  is not defined for customers,"
    Can any body send soln ASAP.
    Thanks and Regards
    RAMS

    Hi,
    i think u have done this
    Define Sales Area
    SPRO
    Enterprise Structure
    Definition
    Sales and Distribution
    Maintain Sales Office
    Go to New entries and define the sales office
    Go to Address Icon and maintain the details and save it.
    Now Maintainain Common distribution channel and common division. common distribution channel and division helps in sharing maste data effectively. Assure you have 10 sales areas. it will b painful process to define a customer at all these areas. instead, it will be wise to create a common distribution channe and division. this can be used as a ref dchnl and divn fo other dchnl and divns. then the master data can be effectivel shared
    Go to Spro: Sales and distribution: Master Data : Define common division and disrtibution channel.
    Hope this will help you.
    Reward ?Point if helpful.
    Thanks,
    Raja

  • Error message: Ship-to party 1111 not defined for sales area 1000 01 50

    Hi friends,
    I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
    When created SO, I got a error message saying "  Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
    Please advise where I missed configuration.
    Thanks,
    Linda
    Edited by: LindaSAP on May 25, 2010 5:40 PM

    Hi,
    Please check the below links
    Ship-to party not defined for sales area
    "SHIP TO PARTY NOT DEFINED FOR SALES AREA "
    Ship to party is not defined for sales area..
    Ship-to party not defined for sales area
    Ship-to party 147 not defined for sales area US DS 20
    ship to party -sales area error
    Regards
    Senya

  • Is there a BAPI or Function module can create a Customer Master record?

    Hi experts,
    In SE37, Is there a BAPI or Function module can create a Customer Master record?
    Regards

    BAPI_CUSTOMER_CREATEFROMDATA1
    also see this thread.
    Re: Create customer record  in SAP via BAPI
    кu03B1ятu03B9к

  • Sales document item is not defined for this transaction in Pur.Order

    hi,
    At the time of convertion of pr to po one error message received.
    Sales document item 46 000010 is not defined for the transaction
    Message no. V1198
    Diagnosis
    You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
    This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order.
    Procedure
    Please check your entries.
      this is MAKE TO ORDER SCENARIO  THIS ERROR IS FOR RAW MATERIAL  CONVERTION  AGAINST SALES ORDER.

    Hi,
    Check in material master MRP3 view there is field called strategy group where you have option to define the planning strategy like make to order/make to stock & like.
    Regards
    Ravi Shankar.

  • Err in PO creation-Sales document item is not defined for the transaction

    Hi,
    I am getting the following error while creating PO
    "Sales document item 30000183 000100 is not defined for the transaction
    Message no. V1 198
    Diagnosis
    You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
    This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order."
    I have used an item category which is copy of TAB and the sales order line item is attached to WBS element.
    can any one guide me what needs to be done.
    thanks

    If you want the sales order creation to initiate a PO creation automatically, check if the "Create PO Automatically" button is ticked on for the item category in Transaction flow tab in tcode VOV7
    This will solve your problem, provided your configuration for PO on the MM side is fine.
    Reward if this helps.

  • Restrict the creation of customer master records at sales area level

    I know that you can supress fields at the company code and sales area level in customer master, but, is there a way in configuration to restrict the creation of a customer master record at the company code and sales area levels?  Only the general data level is needed for this customer account group. 
    Any help would be greatly appreciated!!

    Hi
    Create the Customer Master without entering the Company Code and sales Area. The system will allow and ask you to fill only the General Data.
    The other way is that Create a Account Group and suppress its all Fields of Accounting View and Sales Area View, so that for that account group you will have to maitain only the General view.
    Regards
    Amitesh Anand

  • Customer Master Record and Sales Area

    Hi All,
    I'm new to SAP SD and so would appreciate some help.
    A Customer Master Record may exist for many sales areas.  Does this mean many sales area within one Sales Organizational right??

    Welcome to the forum.  As a new member, I would like to inform you that there are certain rules and regulations applicable to this forum which you can find to your right screen where it has also been indicated that posting basic / repeated query is not allowed.
    Please AVIOD  posting queries like this.  Since you have indicated that you are new to SD, it would be better if you test in SAP and see whether system is allowing or not so that you will learn on your own. 
    G. Lakshmipathi

Maybe you are looking for