DCOM Error on T430S since System Update

After running system update, I get the following error in the Event Log and continuous CMD Prompts opening and closing immediately.
Event ID 10010 The server {717D1D6E-9366-44A8-A935-725C2349D888} did not register with DCOM within the required timeout.
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          07/08/2014 21:20:40
Event ID:      10010
Task Category: None
Level:         Error
Keywords:      Classic
User:          LENOVO-PC\Marissa
Computer:      LENOVO-PC
Description:
The server {717D1D6E-9366-44A8-A935-725C2349D888} did not register with DCOM within the required timeout.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-07T20:20:40.326502000Z" />
    <EventRecordID>159374</EventRecordID>
    <Correlation />
    <Execution ProcessID="936" ThreadID="8348" />
    <Channel>System</Channel>
    <Computer>LENOVO-PC</Computer>
    <Security UserID="S-1-5-21-698325216-479766158-2809752964-1004" />
  </System>
  <EventData>
    <Data Name="param1">{717D1D6E-9366-44A8-A935-725C2349D888}</Data>
  </EventData>
</Event>
OS Win 8.1 Fully updated
Event goes away when booted into Safe Mode with Networking.
Have tried disabling AV, but error persists
Any help appreciated as it is getting really irritating. 

I found prosiable solution. 
Run untivirus or anything that scans your system, and while it runs film your screen using video recording device.  I used my phone. because scaner slowesdown the system your phone or video camera can capture the exact problem your system is trying to show. After freezing the video you will see your problem.  
In my case there was a BlackBerry folder that system was trying to delete but wasn't able to. So I went to save mode and deleted it. and DONE. 
It worked for me maybe it will work for you too. 
Good luck. 

Similar Messages

  • Application Manager fails to open on iMac since system update

    Since system update Application Manager fails to open.  Have tried new installation without success.  Works OK on my MacBook pro.

    Hi,
    Please rename the OOBE folder to OOBE.old from these location and reinstall AAM.
    Click Go/Go to Folder and type
    ~/Library/Application Support/Adobe
    /Library/Application Support/Adobe
    You can download AAM from this location
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4774&fileID=4438
    Please let us know if it helps.
    Abhijit

  • Since system update my emails wont connect to server- Please help

    My emails have worked fince since owning this phone, but as of 5/6 days ago the emails will no longer work. s
    I have looked at the settings and still says cant connect to server, so I deleted the account from the phone to then reinstall. But now it wont connect at all and I get the error message could not open conection to server. I have also tried entering manually but still have no luck. I had a system update around the same sort of time so I ma unsure if this has effected things.
    I have had to open the Hotmail app from the play stor in the mean time, but would like to get the phone working as it should as this had an email time setting so I wasnt disterbed by junk mail in the evening/night.
    Please can someone advise.
    Thank Jenny

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    First try clearing data for the email app under Settings -> Apps -> All -> Email -> Clear data and then restart the phone. When you then open the email app it will ask for your email address and password. Enter those but select manual setup, Exchange ActiveSync and then use m.hotmail.com as server address, your email address as user name and see if that works.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Error 77 with ThinkVantage System Update

    I haven't been able to use TV System Update on my T43 for sometime now.  After downloading ca. 20% (but it varies) of package information, it halts with "Error 77 received from the Package Index Server.  Please contact the Support Center."
    I have manually downloaded and installed  version 313-2008-3-13.  As part of installation, it looked like it uninstalled the previous version and removed the settings.  Despite this, I still get the same error.

    I have same issue. I bought a T60P with XP pro a year ago. I have since installed Vista Business and also a virtual pc with XP pro and with Vista as host. I have XP pro (virtual) setup on my home network. I am wireless (with printer wireless) and all works well. I am running NOD32 and Outpost Firewall Pro on virtual (2007). When I installed ThinkVantage System Update all went well till I got same message as you did. ThinkVantage System Update works ok with host, which is Vista, but not on virtual.

  • Since system update, can no longer save photos or access galleries

    I received and installed a system update yesterday.  Now, I can no longer access photos or save any photos.  Most of the time, when I press the camera button, I get a message that says "Sorry!  The process androoid.process.media has stopped unexpectedly.  Please try again."  I also get this message when I go to settings, about phone and it happens at random times, like when I'm checking email or texting.
    A couple of times I've been able to get the camera open and take a photo, but after I save it, when I go to gallery, it says there are no photos or videos to show.
    I thought all of my photos had been deleted, but I was able to plug my phone into the computer and copy them, so they are there on the phone somewhere.
    I tried restarting, removing and reinstalling the sd card, and installing a brand new sd card.  Nothing has helped.
    How can I fix this?

    July a Hard Reset or FR is a factory Reset what it does is takes your phone back to when you bought it new at the store an to get to were you do the hard reset you need to Hit menu > Settings > then Sd An phone Storage an scroll all the way to the bottom were you will see Factory Data Reset but dont Tap on it . Unless you know how to do the FR.
    Since your new to doing a Fr Call Verizon go to option 3 or Technical support on a landline phone or a cell phone other than the one that needs the FR Tell them you have the Original Incredible an you need to perform an Fr an they'll help U go thru the steps.
    Now you'll have to back up your contacts they'll tell you how to do it an if bought any apps they'll be save you free apps you need to write them down on a peice of paper so you know what you had an can re enter them.
    but a wildman said this will help the phone. Good Luck an let us know if it help ya.!  B33
    P.s Don't unmount your card an don't " format"  it.!    if you do you'll loose you pictures an Music. as they're on the Card

  • ISight audio no go since System Update

    Since last week's System Update my external iSight mic is no longer available as a choice for audio input in any app or in System Preferences->Sound. Have checked all the heretofore posted remedies to no avail. Works perfectly when I boot from my most recent backup disc (no Sys Update from last week). I see some others have had audio AND vid probs but mine is audio only. I get vid in all apps but no mic recognized. Any ideas or do I have to wait for another update from Apple to fix the prob?
    Jimbo

    WizOfAhhhs wrote:
    Since last week's System Update my external iSight mic is no longer available as a choice for audio input in any app or in System Preferences->Sound. Have checked all the heretofore posted remedies to no avail. Works perfectly when I boot from my most recent backup disc (no Sys Update from last week). I see some others have had audio AND vid probs but mine is audio only. I get vid in all apps but no mic recognized. Any ideas or do I have to wait for another update from Apple to fix the prob?
    Jimbo
    Well done on the good troubleshooting and clear explanation in your post, Jimbo!
    There is no need to await a later update. My external iSights work with the latest OS system software.
    Because your same iSight (and Firewire cable?) works with your pre-update system, perhaps your download or update installation had problems. Run the update again, this time with the Combo version as follows:
      • Connect external iSight.
      • Restart Mac and then use your Mac's Disk Utility to repair permissions.
      • Download and install http://support.apple.com/kb/DL1048
      • Repair permissions again as soon as the restart completes the Combo Update.
      • Then check to see if iSight's mic is available now.
    If you still have problems, the troubleshooting suggestions here may give you some more ideas:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Error message with ThinkVantage System Update

    When I run system update I am getting this message:
    "An error was detected with the package catalog for your system on the System update Server.  Please contact the Support Center."
    My system is the E420s. 
    brassie

    brassie,
    This seems to be a common problem and has to do with the servers the updates are on, the thread here: System Update fails with "An error was detected with the package catalog for your system...
    A few solutions are offered, sometimes the web server needs to be reset and sometimes an uninstall/reinstall of System Update does the trick.
    Not sure the root cause of this issue, it seems to be something that the Lenovo folks are working on still.
    Best Regards,
    Ed
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

  • Strange error with authentication after system update

    After a system update i get this strange thing in authentication.
    see image:
    Can anyone tell me what's this? Is this a virus?
    Thanks

    That is not a virus. That's a font problem, most likely a corrupt font cache. Try restarting in safe mode, then restart normally. (This will clear some of the font caches, among other things.)
    If that doesn't fix it, try some of the other fixes mentioned here:
    https://discussions.apple.com/thread/3273445?start=0&tstart=0

  • DCOM Error 10005 in PRD System - Secondary Cluster

    Hi,
    We have noticed the following errors getting listed in the Production
    Server - Secondary Cluster System.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2008/12/04,12:15:48,DCOM got error "The service cannot be started, either
    because it is disabled or because it has no enabled devices associated
    with it." attempting to start the service SAPPRD_10 with arguments
    "-Service" in order to run the server:
    {EFC29CCA-A03C-11D0-A1F2-0000F62893CC}
    2008/12/04,12:15:47,DCOM got error "The service cannot be started, either
    because it is disabled or because it has no enabled devices associated
    with it." attempting to start the service SAPPRD_02 with arguments
    "-Service" in order to run the server:
    {EFC29CCA-A03C-11D0-A1F2-0000F62893CC}
    2008/12/04,12:15:46,DCOM got error "The service cannot be started, either
    because it is disabled or because it has no enabled devices associated
    with it." attempting to start the service SAPPRD_01 with arguments
    "-Service" in order to run the server:
    {EFC29CCA-A03C-11D0-A1F2-0000F62893CC}
    2008/12/04,12:15:45,DCOM got error "The service cannot be started, either
    because it is disabled or because it has no enabled devices associated
    with it." attempting to start the service SAPPRD_00 with arguments
    "-Service" in order to run the server:
    {EFC29CCA-A03C-11D0-A1F2-0000F62893CC}
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    the above log has been translated from Japanese to English.
    We have gone the cluster log but could not find any clue as to what
    actually caused the error.
    BTW, we have noticed the below SAP Services are in Disabled mode in the
    secondary Cluster system
    01) SAPPRD_00
    02) SAPPRD_01
    03) SAPPRD_02
    04) SAPPRD_10
    Any Idea ?
    Thanking you in anticipation.
    Best Regards
    LRaghunahth

    Hi Goran,
    Thanks for your reply.
    It was really helpful. According to my knowledge we did not set the SAP services to  Disabled.
    So wondering how the SAP services on the secondary cluster is set to Disabled.
    Is there any possibility that the services are changed from manual to Disabled by itself ?
    Thanking in anticipation.
    Best Regards
    L Raghunahth

  • Why do I get random BSOD when using Firefox with windows XP pro 32 bit? Seems to happen since system updates on 01/09/13.

    I am using Chrome to write this and no crashes. I have defragged with the system defrager and Defragler both. I bought new memory but this issue happened a couple days after install around the time of some microsoft updates 01/09/13. I have run Memtest and a hard drive test as well, done a power cycle and run a disk cleaner. This only happens when using Firefox.

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • "System Update" refuses to load; perpetual restart message leads nowhere. R40, Windows XP.

    Folks,
    I get the following error message continuously - System Update never starts up, even after clicking "OK"; the only thing that happens is this error message goes away for about ten or fifteen seconds and then comes back. The only way I can get rid of it is to go into Task Manager and kill both of the relevant processes.
    http://files.iclippy.com/109436/1251274772.jpg 
    I removed and re-installed System Update 3.14 (the latest "driver"), and then removed that and installed an earlier version - no difference. I also repair-installed Microsoft NetFrame 2.0 ( or something like that), since System Update 3.14 apparently needs that - it didn't help .
    I hadn't run System Update in - god knows how long, so, wanting to make a fresh back-up after running CCleaner and doing AVG Anti-virus and Ad-Aware scans, I decided it was about time to see what the latest Lenovo updates were first; now this.
    Any ideas on how to get System Update to function properly on my machine (R40 2897-54U running Windows XP)?
    Note from Moderator:  Image(s) >50k converted to link(s).
    E
    Thinkpad R40 2897-54U running Windows XP Pro

    Hi,
    the firs thing, that I saw is, that you are using a realy old version of TVSU. You are using 3.13.0009.
    Go to following link and download the latest version of TVSU: <3.14.0024>
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TVSU-UPDATE
    And then make following steps:
    - delete the old version of TVSU using Control Panel
    - once it's removed, go to %programfiles%\Lenovo
    - if you see the folder "System update", then delete it manually
    * reboot the machine
    - after it starts back to OS install the downloaded version of TVSU
    - once it's installed, check whether it's working
    From your logs it's obvious, that this aplication could not be started in your environment/OS. TVSU could not be started, but unfortunately the reason is not realy shown.
    Test the above and let me know about the results
    Rgrds

  • Cannot install system update 3.14 on T42 and T30 as well

    Hi All
    First status I ve alreadu install SystemUpdate on a T42p everything works well.
    But
    On T42: I ve got the following error
    Another version of System update is installed would you like to unistall it I choose Yes. The it tell me that it is not able to uninstall it. and stops the installation . What should I remove manually ?
    On a T30:
    Without any message it stops the installation. What should I do to give you more information to solve this (perhaps using cmd line) ?
    Thanks
    Pierre
    Message Edited by pierr0t on 05-26-2008 07:54 AM
    Solved!
    Go to Solution.

    Pierre, welcome to the forum,
    If I remember correctly you need to uninstall the IBM Update Connector which doesn't show up in Control Panel - Software.
    If you run the SetUp file in C:\IBMTOOLS\APPS\UPDATER it should offer you the option of uninstalling it.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Runtime error when trying to use Thinkvantage system updater

    I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
    "Runtime error!
    Program:C:\Program Files\Lenovo\System Update\tvsu.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    Can somebody please help me to get the Thinkvantage system updater working properly?
    Thanks-George
    This issue has since been resolved.Thanks-G

    I'm getting the same error.   I tried reinstalling system updater but it didn't help.

  • Error 1722 when trying to install System Update

    Tried to run the install program for System Update 3.14, but keep getting the message "Error 1722.  There is a problem with this Windows installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor.  Action startsuservice.exe  Location...\startsuservice.e.c"
    I saw another post that suggested the startsuservice.exe file was missing and needed to be copied from another computer, but in my case the file is there and I don't have another machine. 
    Any suggestions?  Thanks

    Searching the forum I found another thread, not the one you mention, with a possible solution here.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • DPM 2012 UR3 Agent Update Error: HRESULT E_FAIL...DCOM Error

    My DPM Server is Windows 2008 R2 SP1 with a locally installed SQL and DPM Server and fully patched. My Workstations are all Windows 7 Ultimate x64, fully patched. I have manually installed the DPM RTM Agent and pushed the UR2 update from the DPM Server
    without any challenges or issues. I have SCEP running with process exclusions for the DPM services on the WS and DPM Server. I’ve been running DPM 2012 RTM and then UR2 without any issues or challenges to-date.
    I have recently updated my DPM 2012 Server from UR2 to UR3 and pushed out all the Agent Updates, which appeared to go successfully from the DPM Console perspective. I spot checked a few systems, 1 workstation (WS) and 1 server, everything looked good. A
    couple of days after this I noticed 2 of my workstations failed backing up to Tape. I noticed the recovery options available for these WS’s have stopped updating hours after pushing the UR3 Agent update. The 2 WS’s I'm troubleshooting have a little different
    scenario. I have 2 other WS’s that were updated in the same manner and are working perfectly.
    Both WS cannot connect to the DPM Server and displays this DCOM Error:
    "ERROR:ERROR HRESULT E_FAIL has been returned from a call to a COM component."
    The 1st WS DPM Client has a Yelow Sign over-lay and "Administrator has not configured backups." when you hover over it.
    The 2nd WS does not the Yellow Sign over-lay.
    All the properties of the Local DPM Client Console 'Summary and Protected item'  tabs are not updated on the 1st WS but are on the 2nd WS.
    1st WS process:
    The Recovery Tab shows the available recover dates to choice from.
    I can expand one of the backup dates, folders and copy a file to this system.
    I can view my previous recovery Points from the console dating back to when I updated the Agents.
    I’ve validated the DCOM settings on both WS's compared to a WS that is working, they are the same.
    I uninstalled the agent manually, then copied and reinstalled the new UR3 Agent Version with the same outcome.
    I uninstalled the new version and reinstalled the previous version, same error.
    I then proceeded with upgrading UR2 agent version installing the UR3 version over the top, same error.
    I logged on to this WS as the Domain Admin, removed and reinstalled the UR3 version, same error.
    I removed, applied and then re-added the DPM server to the local WS DPM and DCOM Groups.
    I removed, applied and then re-added the WS from the Groups on the DPM Server.
    I’m able to see, ping and view other backup folders presented on the DPM server on this WS.
    In the DPM Console I am able to connect to this Workstation successfully from the Administrative, Agent Space.
    The DPMClientProtectionCurr.errlog file shows this repeatedly:
    0FC0   
    065C    10/13   05:02:32.499 
    03        service.cpp(298)         
    [000000000021FD90]            
    ACTIVITY         
    CService::AnnounceServiceStatus
    0FC0   
    0D18    10/13   05:02:33.059 
    33        dlsclientprotection.cpp(778)           
    [00000000002BC850]            
    NORMAL          
    Connecting to DPM Server: (<Server.FQDN>)
    0FC0   
    0D18    10/13   05:02:33.171 
    33        dlsclientprotection.cpp(861)           
    [00000000002BC850]            
    WARNING         Failed: Hr: = [0x80004005] : Failed to set client OS details - ClientName:<WS.FQDN>, ClientOSVersion:6.1.7601, OSType:2, AgentVersion: 4.0.1920.0
    0FC0   
    0D18    10/13   05:02:33.171 
    33        dlsclientprotection.cpp(1490)           
    [00000000002BC850]            
    WARNING         Failed: Hr: = [0x80004005] : Failed to get connection to DPM server: lVal : ConnectToDPMServer(bstrClientMachineName, &pIUnknown, &fConnectionSuccessful, &dCurrentStatus,
    exceptionResult)
    The
    DPMRACurr.eerlog show this for both WS's:
    0EF0 1110 10/13 04:05:02.157 22 genericthreadpool.cpp(824) [000000000093C360]  NORMAL Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[20]
    0EF0 1110 10/13 04:05:02.157 03 miscellaneousutils.cpp(918)   NORMAL Error:ERROR_UNKNOWN_PRODUCT, While detecting DPM version. Assuming DPM isnt installed.
    And this one repeatedly:
    0BE8 08EC 10/13 13:59:40.404 29 radefaultsubtask.cpp(382) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID does not exist, {DB3F138D-DE37-414D-BADC-5A161C6E7E1C}
    0BE8 08EC 10/13 13:59:40.404 05 defaultsubtask.cpp(546) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceivedSpecific(pCommand,
    pOvl)
    0BE8 08EC 10/13 13:59:40.404 05 defaultsubtask.cpp(751) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceived(pAgentOvl)
    The 2nd WS Process:
    I did not remove or touch the local agent installation because the information is populated on this client’s agent properties fields.
    I can see the folder selections I’ve chosen to be backed up by the protection group configuration.
    When i open the Agent UI I receive the sam DCOM error.
    I also receive a different error message on this WS when I try and do a Sync Now from the General Tab: Failed to trigger synchronization.
    I was able to perform a consistency check on this WS that completed successfully from the DPM server.
    I’ve validated the networking configuration settings are correct.
    I flushed local DNS cache.
    Thanks,
    Paul

    Hi,
    I have a Windows 7 x64 machine that exhibits this problem. It seems that it is not caused on the client side but on the server side.
    In our case the server logs the following every time the client tries to connect:
    WARNING    Verify disconnected client failed with exception: System.ArgumentException: Das Element wurde bereits hinzugefügt. Schlüssel im Wörterbuch: "<machinename>". Hinzuzufügender Schlüssel: "<machinename>".
    (Translation: Element has already been added. Key in Table: "<machinename>". Key to be added: "<machinename>".
    I have uninstalled the agent on the client several times. One time I have seen the following error message on the server side:
    Deployment.cs(2815)            NORMAL    Removing all agent records for server[<machinename>] from table InstalledAgent.
    ntlmutils.cpp(185)            WARNING    Failed: Hr: = [0x80070002] : Error trying to open key [HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\NtlmAuthData\<machinename>]
    SchedulerImpl.cs(166)            NORMAL    Entering DeRegister, JobDefID: bafe2b8b-53b2-4694-aa28-9e2c6c152d51
    Catalog.cs(1006)            WARNING    No retry on exception The specified @name ('') does not exist. while executing sp_delete_alert
    Catalog.cs(1013)            WARNING    SqlException encountered, SqlRetryCommand diag details - SqlCommandText  => Name=msdb.dbo.sp_delete_alert, CommandType=StoredProcedure
    Catalog.cs(1013)            WARNING    CommandDiagInfo => CanRetry=False, CommandTimeout=3600
    Catalog.cs(1013)            WARNING    CommandParams   => Count=2, InTx=True
    Catalog.cs(1013)            WARNING         Param[0]   => ParameterName=@name | Value= | Size=0 | DbType=NVarChar | Direction=Input | IsNullable=False
    Catalog.cs(1013)            WARNING         Param[1]   => ParameterName=@RETURN_VALUE | Value=1 | Size=0 | DbType=Int | Direction=ReturnValue | IsNullable=False
    EventManager.cs(98)            NORMAL    Publishing event from SchedulerImpl.cs(838): JobScheduleChange, [JobDefID=bafe2b8b-53b2-4694-aa28-9e2c6c152d51]
    Errors on the client side appear the moment the agent is re-added to the DPM server (I use "connect agent" instead of "install agent"). After that moment I get the message "Error connection to the DPM server. Error: a COM-component returned E_FAIL" every time
    I open the DPM client. This is mirrored by the Verify error mentioned above on the server side.
    To me it seems that parts of the machine config are still in the MSDB after removal (maybe caused by the registry error). If this client is connected again, the orphaned database entries cause the Verify error
    If that's true, how could we get rid of those entries? Would it help to rename the client?
    Uwe

Maybe you are looking for