DDIC objects not existing in standalone WAS

Hi all,
Here is our pb :
We started a bsp developpement on a R3 system with WAS6.20.
We transported our code (only the code concerning bsp application) to a new standalone WAS 6.40. But on this new machine a lot of ddic elements were not available. Especially all BAPI structures (BAPIORDERS, BAPIITEM...).
I don't undestand why these structures are not part of a basic standalone was. Is it a was installation issue ?
Anyway is there a way to pick the ddic elements from was 6.20 to export them to was 6.40 ?
Other solution would be to modify our code and create new data structures and elements but it seems quite a painful job to me !
Thanks
Sylvain V.

That situation sounds fairly normal. R/3 has extra components (APPL is one of them) installed on top of the standalone Netweaver system (basic Netweaver is just ABA, BASIS, and BW). Obviously any data elements or structures that belong to packages (development classes) that are part of R/3 won't be there.
I wouldn't necessarily suggest trying to transport them from an R/3 system. These objects are in SAP's name range and transport scheme. I think you would run into considerable problems trying to export/import them.
You can recreate them by hand as new objects within your customer name range. This is what I used to do quite often. Another option would be to use the BAPI Browser to create local definitions for the structures. I have also used XML and BAPI function module wrappers to avoid having to recreate structures. A final option would be to install your 640 system as a full R/3 (ERP2004) installation and not just a standalone Netweaver system. This will make your system considerably larger however.
Here are some weblogs that I wrote on the subject some time back:
/people/thomas.jung3/blog/2004/06/23/bsp-150-a-developer146s-journal-part-iv-rfcs-and-the-bapi-browser
/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs

Similar Messages

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

ORA-12545:connect failed because target host or object not exist

Dear DBA's
I am getting this error message when i want to connect oracle by using internet explorer browser.
ORA-12545:connect failed because target host or object not exist
I already started services: oracleservicesSID,OracleOraDb10g_home1TSNListener,
and OracleOraDb10g_home1HTTPServer

you should try to startup the Enterprise manager console.
emctl start dbconsole
regards

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

Error: microedition.io.* package does not exists

Been at this for a few days...frustration...funny.
Using JDK 1.6 NetBeant 6.8 with WTK 2.5.2 on XP
Was able to resolve the javax.bluetooth.* package does not exists and xylostudio by doing the following to add the libraries to the project file.
1) Tools > Libraries
2) in the pop up Library Manager window click 'New Library'
3) in the pop up New Library window typed 'bluetooth' > OK
3) highlight 'bluetooth' in Library Manager scroll menu on left
4) click add JAR/Folder
5) added jsr082 from C;\WTK2.5.2_01\lib\jsr082.jar
6) click OK
7) right click project and select properites
8) highlight the library node under Categories on the left side of the Project Properties window
9) 'Add Library' created 'bluetooth'
10) click OK
When the process was followed to resolve the microedition.io.* package does not exist error it was unsuccessful.
The difference in the two processes being New Library name: 'microedition' and added jsr75, MIDPapi20, jsr118, then MIDPapi21 with no resolution to the errors.
Also add the jsr75, MIDPapi20, jsr118, and MIDPapi21 directly to the project by clicking the 'Add JAR/Folder' button in the Project Properties window.
Here is the Output:
init:
deps-clean:
Updating property file: C:\Scholastic\4340MS\REU\ItsAForum\build\built-clean.properties
Deleting directory C:\Scholastic\4340MS\REU\ItsAForum\build
clean:
init:
deps-jar:
Created dir: C:\Scholastic\4340MS\REU\ItsAForum\build
Updating property file: C:\Scholastic\4340MS\REU\ItsAForum\build\built-jar.properties
Created dir: C:\Scholastic\4340MS\REU\ItsAForum\build\classes
Created dir: C:\Scholastic\4340MS\REU\ItsAForum\build\empty
Compiling 8 source files to C:\Scholastic\4340MS\REU\ItsAForum\build\classes
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:8: cannot find symbol
symbol : class Connector
location: package javax.microedition.io
import javax.microedition.io.Connector;
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:9: cannot find symbol
symbol : class StreamConnection
location: package javax.microedition.io
import javax.microedition.io.StreamConnection;
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:10: cannot find symbol
symbol : class StreamConnectionNotifier
location: package javax.microedition.io
import javax.microedition.io.StreamConnectionNotifier;
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:19: cannot find symbol
symbol : class StreamConnectionNotifier
location: class mobile.communication.Server
private StreamConnectionNotifier server = null;
^
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:20: cannot find symbol
symbol : class StreamConnection
location: class mobile.communication.Server
private StreamConnection connection = null;
^
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:58: cannot find symbol
symbol : class StreamConnectionNotifier
location: class mobile.communication.Server
server = (StreamConnectionNotifier)Connector.open(URL);
^
C:\Scholastic\4340MS\REU\ItsAForum\src\mobile\communication\Server.java:58: cannot find symbol
symbol : variable Connector
location: class mobile.communication.Server
server = (StreamConnectionNotifier)Connector.open(URL);
^
7 errors
C:\Scholastic\4340MS\REU\ItsAForum\nbproject\build-impl.xml:413: The following error occurred while executing this line:
C:\Scholastic\4340MS\REU\ItsAForum\nbproject\build-impl.xml:199: Compile failed; see the compiler error output for details.
BUILD FAILED (total time: 4 seconds)
any information would be much appreciated. Thanks,
LD

By completing the process shown in below link and adding the bluecove jar file directly to the project as of the reply post suggests, all compilation errors were corrected.
http://forums.netbeans.org/viewtopic.php?t=22823&start=0&postdays=0&postorder=asc&highlight=microedition
Thanks me for point me in the right direction,
Me is happy.

Error in Local Message System: RFC destination MB3AP1039 does not exist.

Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.

Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh

Error in Local Message System: RFC destination 10.189.98.10 does not exist.

Error in Local Message System: RFC destination 10.189.98.10 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam going inside the tcode SM30 in the satellite system and entering the destination ip of solution manager system and after that when iam creating a message from HELP-CREATE SUPPORT MESSAGE, then it is throwing the following error.
Can anyone please help me in the above issue.
Regards,
Mirza Kaleemulla Baig.

Hi Mirza,
For the RFC destination don't enter the IP address,enter the RFC name,somthing like SM_SP1CLNT200_BACK which is maintained in sm59.
Revert for any clarifications.
Thanks and Regards,
Avinash.

Connection Failed - The Server May Not Exist

On two 10.4.7 machines, when I try to connect to a 10.3.9 machine, I get a message that the server may not exist. It was working fine last week, then all were shut down over the weekend.
When I choose Network on the Desktop, the server shows up on the list as long as it's running, so the list of available servers recognizes it. Although I'm sure nothing was changed, I've checked and re-checked sharing and network settings on all three computers. IP addresses are correct and so are the names of the computers. I've run utilities on the 10.3.9 machine and one of the 10.4.7 machines. I've restarted every computer. The result remains the same.
Any help would be appreciated.

Only thing I can think of is that a setting did get changed or borked on the 10.3.9 machine.
Appletalk is available in both OSes, but Tiger can no longer do AFP over Appletalk... think it just uses it for "Discovery", so I'm thinking the 10.3.9 machine is trying to communicate via Appletalk instead of TCP/IP.
Have you tried from the Finder>CMDk>afp:// the actual IP of the other machine?

Insert when not exists

Is there anyway of getting owb to implement the following sql without
resorting to using a insert update operation:
insert into desttable
(select * from myview where not exists (select null from b where desttable.emp_id=myview.emp_id)
This sounds almost like the perfect application for an insert/update (or merge)
operation. But in my case, I do not want to update the destination tables if I get
a match, I am only interested in using the insert part of a merge operation. I could
create a dummy update clause, but that would be a waste of resources.
Any ideas?
Graeme

What I've done in this situation, and there might be a better way, is use an outer join. Essentially, I do this:
insert into desttable (
select a.*
from mytable a, desttable b
where a.emp_id = b.emp_id(+)
and b.emp_id is null
I believe this accomplishes the same thing as "not exists".
Message was edited by:
user631136

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Object does not exist : MESSAGE OL 826 - Production issue

R/3 release 4.6C
Transaction: FB03
Custom WF: Triggering events: FIPP-CREATE and FIPP-COMPLETED
When we try to post a document (journal) the workflow gets triggered and reaches the approver. The approver approves it and then it gets posted.
Here in this case, after the approval the workflow running into error with u201Cmessage OL 826 Object does not existu201D
When I click on the message I get this information
Object does not exist   :   Message no. OL 826
Diagnosis :   You tried to create an instance of the object type EMPLOYEET with the
                    key 1234520080603. No instance of this kind exists.
                PERNR u2013 12345
     Date      - 03.06.2008
I checked this using the FM P_EMPLOYEE_CHECKEXISTENCE and it is working fine there. This FM is used in EMPLOYEET object for existence check.
Initially I thought the problem was with document and the buffer but after checking u201Cdiagnosisu201D message, it confirms me that this is related to Employee.
This is happening only to one employee and all other have NO issues.
I have checked with HR team and they reckon everything is fine from their side.
Since this is in Prod I am unable to debug and test.
I was looking into the previous forums to find the solution but couldnu2019t find RIGHT one. Could you please suggest any solution for this ?
Your help greatly appreciated.
Sreethan
Edited by: SAP User on Jun 12, 2008 12:13 PM

Dear Mike/Martin,
        Could you please explain a bit about the authorization problem?
        PERNR    A, B, C, and D do the posting the docs through FB01 and PERNR X usually do the approvals. the problem is happening onlyl with PERNR A ... if the approver has the auth problem then it could be same issue with other... please correct me if I am wrong.
    As Martin suggested I have contacted HR team but they say .... they dont see anything different or changes for this EMP. The personal record is coming from the EVENT FIPP-CREATE or COMPLETED so there is no manual interaction.
Just guessing: if this is the problem for all the employees then what could be the reason ? guessing that in random it is happening to this emp. He has posted 6 docs....all of them have the same issue. I checked last 3 months records and I did see Couple of workflows in last 3 months with the same error.... so just thinking if this is the problem with all emp happens onlly ramdomly.
Thoughts ??
Thanks & Regards,
Sreethan

Object instance 1200 does not exist (while executing task SWUS)

hello all,
i have created a workflow class and two methods (constructor, display) and 1 attribute PLANT (instance,public) in it.
i am using this class and display method in task t code PFTC.
While executing this task from SWUS , i am getting this error.Object instance 1000 does not exist.
As i was going through this blog. i have created everything exactly just like it is mentioned there.
But still i am getting this error. please guide me to detect where i am mistaken.
http://scn.sap.com/community/bpm/business-workflow/blog/2006/07/25/using-abap-oo-methods-in-workflow-tasks
this is class screen-shot and error i am facing while executing the task.
The methods which are implemented using the interface are emtpy(don't contain any source code lines).

sorry i forgot to mention that input value 1000 does exist in our system.
i have also tried F4 help. it is showing all existing plants in our system, but still it is not accepting values select from f4 help.
Also to add information,
I have executed class using F8 option in class builder, and it is working perfect.
source code of display method.(i am trying to view plant in display method just like in blog).
method DISPLAY.
break-point.
   data: ls_vt001w type v_t001w.
   CLEAR ls_vT001W.
   ls_VT001W-MANDT = SY-MANDT.
   ls_VT001W-WERKS = me->PLANT.
   CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
     EXPORTING
       ACTION    = 'SHOW'
       VIEW_NAME = 'V_T001W'
     CHANGING
       ENTRY     = ls_vT001W.
endmethod.

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
   IN BACKGROUND TASK
   DESTINATION 'PI_DEST'
   EXPORTING
     t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

ORA-12545: Connect failed because target host or object does not exist

Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
Robert

Hi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun

ORA-34492: Analytic workspace object cubename _STORED does not exist.

I am having issues accessing cube data from a user other than where the AW was built.
Following is what I have done in User-1:
1. Create two AW's in User-1 : AW-1 and AW-2.
2. Create all objects in these two AW's
3. AW-2 is dynamically attached on attaching AW-1 by using PERMIT startup programs. Please refer Attaching multiple AW's
4. Refreshed both AW's to load data
5. ALLCOMPILE - no errors.
6. Created some SQL views on User-1 which basically query the underlying cube views. I also have some queries using the olap_table option.
7. All my querries work fine in User-1. I can access data from AW-1 and AW-2.
However, we give access to the above SQL views through an abstract user: User-abs. In 10g, all we did was grant select privs to all the User-1.AW$ tables and also on all the sql views. This would let User-abs get data from the cubes in User-1.
I am not able to get User-abs to do the same in 11g. We encounter an error mentioning that the workspace object <cubename>_STORED does not exist. The cubename it is referring to exists in AW-2.
I granted select privs on all AW$ tables, dimension views, cube views and the abstracted sql views but the error persists.
I tried searching this forum but could not find any helpful leads. Any help will be greatly appreciated.
Thanks!
Database - 11.2.0.1
AWM - 11.2.0.2.0A

I can think of two possible problems. First, you may not be properly qualifying the owner name when you refer to the object. This can be important when refering to objects owned by other schemas. For example instead of 'my_cube_stored' you would say 'user-1.aw-2!my_cube_stored'. You should also be careful about the order in which you attach the AWs. Do you want AW-2 attached first or last? Use the LAST keyword on AW ATTACH to control this.
Another possibility is that you have added additional logic to PERMIT_READ over and above the 'aw attach' comand. I was able to recreate the error with the following code in a new AW called TEST_AW in the GLOBAL schema.
DEFINE PERMIT_READ PROGRAM BOOLEAN
PROGRAM
aw attach global.global
show global.global!units_cube_stored
return true
ENDAttaching TEST_AW in RO mode as any user gives me the following error.
ORA-34492: Analytic workspace object GLOBAL.GLOBAL!UNITS_CUBE_STORED does not
exist.
ORA-06512: at "SYS.DBMS_AW", line 93
ORA-06512: at "SYS.DBMS_AW", line 122
ORA-06512: at line 1Here is the documentation for PERMIT_READ
>
PERMIT_READ
A PERMIT_READ program is a program that you can create and that Oracle OLAP checks for by name when an AW ATTACH read-only command executes. Depending on the value returned by the program, Oracle OLAP executes the code within the program after attaching the analytic workspace. Depending on the statements in the permit_read program the user is granted or denied access to specific objects or sets of object values. Within permit_read program, you can specify PERMIT commands that grant or restrict access to individual workspace objects. All of the objects referred to in a given permit_read must exist in the same analytic workspace.
>
Note, especially, the restriction in the last sentence. This means that a PERMIT_READ program in AW1, for example, cannot refer to objects in AW2. So this is why my PERMIT_READ doesn't work. The AUTOGO does not have these restrictions, but as we know from the forum post you cited, AUTOGO is broken in 11.2.0.1. You can move forward to 11.2.0.2 where AUTOGO is fixed, but there is workaround, which is to add a PERMIT_READ program to the second AW to do the work. For example, if I add this PERMIT_READ to GLOBAL and remove the 'show' command from the PERMIT_READ in TEST_AW, then everything works as expected.
DEFINE PERMIT_READ PROGRAM BOOLEAN
PROGRAM
if aw(attached 'test_aw')
then do
show global.global!units_cube_stored
doend
return true
END

DDIC objects not existing in standalone WAS

Similar Messages

Maybe you are looking for