Deadline behaviour for ADR deployments from month to month

I have set up an ADR rule to run on patch Tuesday to get updates. I configured the ADR to re-use the software update group each time. The dates configured on the ADR are:
- Software available to install: in 3 days
- Installation deadline: 4 days
This creates a corresponding deployment when run. However, the deployment has hard dates in it. For eg: if I run the rule today (Nov 10), it will have dates of Nov 13 and Nov 14 for the available and deadline dates.
I was wondering if these dates will be updated every month when the ADR is run? Otherwise all clients will deadline immediately when the ADR runs during the second month (as the deadline would have already been past).
if that is the case, I will have to set it to create a new software update group each time, but I was just trying to avoid that to reduce the clutter that would result each month.
thanks,
-Ravi

The deployment did get replaced with a new one and the new deployment reflects the new dates as well. However the date calculation is slightly off..
The "software available time" is correct, but the "installation deadline time" was set to be available + 4 days instead of available + 1 day as configured in the ADR. Is this a bug, or is there some logic built-in that says that
the deadline cannot be that close to the available time?
thanks,
-Ravi

Similar Messages

My itunes files were deleted. I was able to use an old back up file to restore some but new downloaded purchases from iTunes for the past 5 months weren't in the back up. How do I get those back since I've paid for them one before and use the same account

My itunes files were deleted. I was able to use an old back up file to restore some but new downloaded purchases from iTunes for the past 5 months weren't in the back up. How do I get those back since I've paid for them one before? Can you redownload? If so, how?? Please help as I'm missing over 500 previously paid for and downloaded iTunes song purchases.

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

HT2513 In I cal, I am trying to make a schedule for the gym. It is basically the same every month. How can I transfer it from month to month.

In I cal, I am trying to make a schedule for the gym. It is basically the same every month. How can I transfer it from month to month.? Please help me.

Set each day to repeat? Edit the event, and select repeat. You can set a custom repeat, if it's specific days and not specific dates, for instance.

HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

After my 1 month trial verion expired, i paid for the Adobe XI month to month sub, downloaded the trial version again from the cloud and now when i try to use the month to month paid version it says my trial version has expired, an clues on how i access m

after my 1 month trial verion expired, i paid for the Adobe XI month to month sub, downloaded the trial version again from the cloud and now when i try to use the month to month paid version it says my trial version has expired, an clues on how i access my paid version?

sign out and then back in to your cc desktop app, Sign out, Sign in | Creative Cloud Desktop app
when signing in, use the same adobe id you used to subscribe.

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months.

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months. There is definitely a glitch somewhere because if I am on day view and try to click on day 15 of October, it will not let me. It totally is acting weird.

Free fonts, fonts from a reliable foundry?
Have you tried removing them temporarily?
Do you still have problems if you create a new Windows user account and log in with that? How about if you start in Safe Mode?
And I would run a memory checker and see Troubleshoot font problems | Windows

How to extract data from monthly tables for annual balance chart?

Hello Again!
I am wanting to decide whether to enter all of my transactions into one table for the whole year or separate tables for each month. If I was to use one table for the whole year it would probably have in the region of 1000 entries, and as I understand it, Numbers doesn't work so well with such large tables. Also, as I will be mostly using Numbers on my iPad, where it runs slower, this may well slow things down considerably. Another reason for using Monthly Tables is that it would be easier to search.
Having said this, I am using the following method to construct balance charts for my accounts which seems to depend on having just one table for all transactions for the year. Here is a sample of the transactions table:
which updates the balance for each account after each new transaction is entered.
Then I use the following table for creating the balance charts:
It uses the following formula to return the balance at the end of each week for each account (this is the formula for Account 1) which then is displayed in the chart.
=LOOKUP(A2,$Week Number,All Transactions :: Account 1)
If I was to use the Monthly Tables method it is not obvious to me how I would create the Weekly Balance Table, given that I would need to draw data from 12 different tables, and that some of these Tables would contain the same Week Number (for weeks that overlap months).
I would be grateful for any advice on achieving the result I am looking for by the most efficient method.
Thanks
Nick
P.S. Hopefully this is the last question for a while!

I wasn't urging you to keep an annual table but to spit it on an easier to rule basis.
Split it in chuncks of exactly 35 days starting from the first one of the 'year' in operation
Doing that everything will be easier
the index of a day will be calculated by
=DATEDIF(B,D,"D")+1
The index of the 'custom_week' will be calculated by :
=1INT((DATEDIF(B,D,"D")1)/7)
So, it would be easy to gather datas from a given 'custom_week'.
Yvan KOENIG (VALLAURIS, France) jeudi 5 août 2010 10:22:25

HT204291 My AirPlay has suddenly stopped working!! I've been using it for the last 4 months, today I tried to watch a video from my iPad 2 iOS 5 and I have no AirPlay icon. Have also tried it on my iPhone 4 iso5 and also no icon on that. Please help.

I have been using my appletv for the last 4 months, gone to ue it today and the airplay icon dose not appear on me ipad2 running iso5 where is has been. I have also tried on my iphone 4 running iso 5 and again no joy.
I have compleated a soft reset on all devices and checked that they are all conected to the same wifi which they are.
Can you Help

Thanks Winston, restarting my router worked for me too. Seems that somehow the DCHP (maybe due to the Mountain Lion upgrade?) had assigned the same IP address to both the AppleTV and my iMac. The AppleTV stopped appearing as an AirPlay device for my iPhone and Mac, but still the AppleTV had Internet access.
Restarting the router reassigned IPs and without fanfare, the AppleTV is now available to AirPlay.

Terrible service for the past few months, trouble ...

Hi all,
I'm hoping I may be able to get more help here.
For the past few months my phone line has been incredibly crackily and faint, my broadband (not with BT) has also been cutting out for long periods of time making it almost impossible to use.
About 2 months ago an engineer came out and supposedly fixed the fault (I'm not even sure if there was one to fix) only a day later it was back to being crackily and faint.
I called up numerous times and did online fault checks, and nothing came of it, they said there were no faults!
During the past few months I noticed that when the weather is bad (wind, rain, wind and rain, frost) my phoneline is terrible and my broadband connection is non existent. I kept note of this and yup, everytime the weather is bad, so is my broadband+phoneline. It's completely fine when it's dry and calm out.
I contacted BT again (multiple times because the service is terrible) and they said there isn't a fault with my line and that I should call my ISP.
Today I called again because the phoneline was terrible as is the weather, they called my mobile to do a linecheck on the landline, then 2minutes later they put the phone down on me and never called back. I had waited over 30minutes just to get through..
It seems like I'm never going to get this fixed as it's almost impossible to deal with BT on the other end of the phone, and I can't do a fault test online because my internet is dead during the times it is bad..
I also reported that the wire connecting from my house to the telegraph pole is all loose and looks unravled, but they obviously didn't think it was a problem because they wouldn't send anyone out for it.
What am I to do?

I called 151 and reported the fault, they found nothing wrong. As it's intermittent they are going to run a 24hr line test and then get back to me (though he said he'd call in the morning to let me know if an engineer needs to come out.. 24hrs?) fingers crossed the weather is absolutely abysmal tonight!
@HHGTTG If it eventually gets fixed, I'll probably always be waiting to let out a sigh when I see that the weather is bad. Haunted! I hope you're in the clear now.
@surfer157 Perfect, I just bought my nephew a land telescope for his birthday, now i'm going to scope out the wires if nothing comes of the 24hr line test!
My wire is all loose and looks like it has come unravled at the telegraph pole compared to the others that look like they are pulled tightly, so I'm pretty confident it's a similar, if not the same problem you had with a corroded wire. Not confident about getting it fixed anytime soon though...

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Stock report with value and qauntity for given date not month wise

Hi gems,
can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location level

Hi
check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
Thanks

Help: How to get number of sales for a period of months in a report?

I am working on a report with a table having emp_id and order_date. Given input date Begin_date (mm/yyyy) and End_date (mm/yyyy), I need to create a report that shows the number of orders have sold for each emp_id for each of the months within the input range.
Thank you in advance.
Jimmy

I think it should work for you.
select
   ORDERtable.emp_id,
   allmonths.xmonth,
   ORDERtable.amt
from
   (select
      ORDERtable.emp_id,
      to_char(ORDERtable.order_date,'MM/YYYY') order_month,
      sum(ORDERtable.amt) amt
    from
     ORDERtable
    group by
       ORDERtable.emp_id,
       to_char(ORDERtable.order_date,'MM/YYYY')) ORDERtable,
    (select
       to_char(add_months(trunc(:p_datefrom,'mm'),cn-1),'MM/YYYY') xmonth
     from
        (select rownum cn
           from
             dual
             connect by level <= (months_between(:p_dateto, :p_datefrom)+1))) allmonths
where
   allmonths.xmonth = ORDERtable.order_month(+)
order by
   ORDERtable.emp_id,
   allmonths.xmonth

Remote Desktop Licensing Server for multiple deployments

Hi all. I'm towards a project of implementing 4 deployments of RDS in branch offices and 1 in head office. Those tend to be VMs on Server 2012 R2.
I've began collecting info from technet and even found that great post:
http://blogs.technet.com/b/yungchou/archive/2010/01/04/remote-desktop-services-rds-architecture-explained.aspx
but I still can't figure out if I'm to use separate licensing server for all deployments or there is a possibility to use a single one for 5?

If all machines are in the same domain a single license server will be fine. you will just need to add the licence server to your individual deployments via server manager. We have a single license server for 2003TS, 2012RDS 2012citrix VDI and 2008 Citrix
XenApp

IOS 7 Calendar on iPad I cannot go from month view to day view. When I tap on the day of the month nothing happens.

I use to be able to look at my month in the month view and when I wanted to make an appointment for a specific day I just tapped that day and it would open up the day and I could add my appointment to the time slot I wanted. Now when I am in month view and I tap on the day I want to make an appointment it does nothing. If I hold my finger on the day it creates an All Day event which is not what I want to do and even if I add a start time to the event, I don't know what times I have available on that day because the Day view hasn't opened. This is extremely frustrating. On my iphone it works properly...I can go from month view to day view by tapping on the day I want to view. Why can't I do this on my iPad?? If I could go back to ios 6 I would, calendar is not impressive at all!!
Please help with any suggestions or PLEASE APPLE.....FIX THIS!!!

I just tested, and this unfortunately still seems to be a bug in the latest iOS 7.1 release of the Calendar on the iPad, which is too bad since the release notes suggest that this iOS update included both bug fixes and enhancements to the Calendar.
To my knowledge the bug has never been an issue on the iPhone version of the Calendar which behaves exactly as you would expect it should.
It seems inconcievable given the obvious broken-ness of the current behavior coupled with what I would expect is a massive number of people who use the Calendar on the iPad, but is it possible that this bug isn't on Apple's radar?
I'm happy to submit a bug report; does anyone know offhand the process for how the public can report bugs?
This has been persistent in the product for nearly six months; it's well overdue that this bug be squashed.

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

Deadline behaviour for ADR deployments from month to month

Similar Messages

Maybe you are looking for