Deauthentication at the "same time".

Hello guys.
After collecting a lot of logs at the WLC , we can see that there is a problem:
May 25 18:42:29 10.3.0.251 APContr-1: *dot1xMsgTask: May 25 18:42:26.613: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 48:5d:60:68:ba:57
May 25 18:42:29 10.3.0.251 APContr-1: *dot1xMsgTask: May 25 18:42:26.813: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 30:7c:30:6f:17:d0
May 25 18:44:37 10.3.0.251 APContr-1: *dot1xMsgTask: May 25 18:44:35.413: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M3 retransmissions exceeded for client 40:6a:ab:55:c1:cc
May 25 18:44:43 10.3.0.251 APContr-1: *dot1xMsgTask: May 25 18:44:41.017: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 48:5d:60:68:ba:57
May 31 11:01:08 10.3.0.251 APContr-1: *dot1xMsgTask: May 31 11:01:07.033: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 00:18:de:ad:5f:28
May 31 11:01:09 10.3.0.251 APContr-1: *dot1xMsgTask: May 31 11:01:08.033: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 40:6a:ab:55:c1:cc
May 31 11:01:12 10.3.0.251 APContr-1: *dot1xMsgTask: May 31 11:01:10.833: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 48:5d:60:68:ba:57
Sometimes these errors shows up at "the same time":
*dot1xMsgTask: May 10 11:56:33.839: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 00:13:e8:af:98:69
*dot1xMsgTask: May 10 11:56:34.039: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 00:21:6b:b5:e1:a6
*dot1xMsgTask: May 10 11:56:34.239: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M3 retransmissions exceeded for client 10:0b:a9:f3:92:10
*dot1xMsgTask: May 10 11:56:34.839: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 40:2c:f4:34:f6:b4
How this is possible? Sometimes everything is working fine. Sometimes they are just deauthenticated.
I found this discussion:
https://supportforums.cisco.com/thread/2125425
And now MFP is disabled.
Could you share you ideas related with this problem?
Thank you!

I see the same thing on my Android 4.x and IOS devices
Andriod 3.2 was running perfect then i upgraded to Android 4.0.4 on my tab and phone and now they both drop on and off all the time
Here is a debug client on my Samsung Galaxy tab 10.1 runnig Android 4.0.4 i have marked a polace where the controller ignores a EAPoL rely from the device.
*osapiBsnTimer: Dec 04 14:41:18.558: 9c:02:98:81:cd:ed apfMsExpireCallback (apf_ms.c:609) Expiring Mobile!
*apfReceiveTask: Dec 04 14:41:18.558: 9c:02:98:81:cd:ed apfMsExpireMobileStation (apf_ms.c:5021) Changing state for mobile 9c:02:98:81:cd:ed on AP a0:cf:5b:ca:61:d0 from Associated to Disassociated
*apfReceiveTask: Dec 04 14:41:18.558: 9c:02:98:81:cd:ed Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: Dec 04 14:41:28.556: 9c:02:98:81:cd:ed apfMsExpireCallback (apf_ms.c:609) Expiring Mobile!
*apfReceiveTask: Dec 04 14:41:28.557: 9c:02:98:81:cd:ed Sent Deauthenticate to mobile on BSSID a0:cf:5b:ca:61:d0 slot 1(caller apf_ms.c:5113)
*apfReceiveTask: Dec 04 14:41:28.557: 9c:02:98:81:cd:ed apfMsAssoStateDec
*apfReceiveTask: Dec 04 14:41:28.557: 9c:02:98:81:cd:ed apfMsExpireMobileStation (apf_ms.c:5151) Changing state for mobile 9c:02:98:81:cd:ed on AP a0:cf:5b:ca:61:d0 from Disassociated to Idle
*apfReceiveTask: Dec 04 14:41:28.557: 9c:02:98:81:cd:ed Scheduling deletion of Mobile Station: (callerId: 47) in 10 seconds
*apfMsConnTask_0: Dec 04 14:41:33.375: 9c:02:98:81:cd:ed Association received from mobile on AP a0:cf:5b:ca:61:d0
*apfMsConnTask_0: Dec 04 14:41:33.375: 9c:02:98:81:cd:ed 10.145.16.119 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1633)
*apfMsConnTask_0: Dec 04 14:41:33.375: 9c:02:98:81:cd:ed Applying site-specific IPv6 override for station 9c:02:98:81:cd:ed - vapId 1, site 'default-group', interface 'management'
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed Applying IPv6 Interface Policy for station 9c:02:98:81:cd:ed - vlan 0, interface id 0, interface 'management'
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed Processing RSN IE type 48, length 20 for mobile 9c:02:98:81:cd:ed
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 RUN (20) Deleted mobile LWAPP rule on AP [a0:cf:5b:ca:61:d0]
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed Updated location for station old AP a0:cf:5b:ca:61:d0-1, new AP a0:cf:5b:ca:61:d0-0
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed apfMsRunStateDec
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed apfMs1xStateDec
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 RUN (20) Change state to START (0) last state RUN (20)
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 START (0) Initializing policy
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 START (0) Change state to AUTHCHECK (2) last state RUN (20)
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 AUTHCHECK (2) Change state to 8021X_REQD (3) last state RUN (20)
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 8021X_REQD (3) DHCP required on AP a0:cf:5b:ca:61:d0 vapId 1 apVapId 1for this client
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed Not Using WMM Compliance code qosCap 00
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed 10.145.16.119 8021X_REQD (3) Plumbed mobile LWAPP rule on AP a0:cf:5b:ca:61:d0 vapId 1 apVapId 1
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed apfMsAssoStateInc
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 9c:02:98:81:cd:ed on AP a0:cf:5b:ca:61:d0 from Idle to Associated
*apfMsConnTask_0: Dec 04 14:41:33.376: 9c:02:98:81:cd:ed Scheduling deletion of Mobile Station: (callerId: 49) in 1800 seconds
*apfMsConnTask_0: Dec 04 14:41:33.377: 9c:02:98:81:cd:ed Sending Assoc Response to station on BSSID a0:cf:5b:ca:61:d0 (status 0) ApVapId 1 Slot 0
*apfMsConnTask_0: Dec 04 14:41:33.377: 9c:02:98:81:cd:ed apfProcessAssocReq (apf_80211.c:5272) Changing state for mobile 9c:02:98:81:cd:ed on AP a0:cf:5b:ca:61:d0 from Associated to Associated
*apfMsConnTask_0: Dec 04 14:41:33.377: 9c:02:98:81:cd:ed Updating AID for REAP AP Client a0:cf:5b:ca:61:d0 - AID ===> 2
*dot1xMsgTask: Dec 04 14:41:33.381: 9c:02:98:81:cd:ed Creating a PKC PMKID Cache entry for station 9c:02:98:81:cd:ed (RSN 2)
*dot1xMsgTask: Dec 04 14:41:33.383: 9c:02:98:81:cd:ed Adding BSSID a0:cf:5b:ca:61:d0 to PMKID cache for station 9c:02:98:81:cd:ed
*dot1xMsgTask: Dec 04 14:41:33.383: New PMKID: (16)
*dot1xMsgTask: Dec 04 14:41:33.383:      [0000] 12 b5 fb 72 eb c7 35 2d e4 78 df f8 13 3b a5 77
*dot1xMsgTask: Dec 04 14:41:33.384: 9c:02:98:81:cd:ed Initiating RSN PSK to mobile 9c:02:98:81:cd:ed
*dot1xMsgTask: Dec 04 14:41:33.384: 9c:02:98:81:cd:ed dot1x - moving mobile 9c:02:98:81:cd:ed into Force Auth state
*dot1xMsgTask: Dec 04 14:41:33.385: 9c:02:98:81:cd:ed Skipping EAP-Success to mobile 9c:02:98:81:cd:ed
*dot1xMsgTask: Dec 04 14:41:33.385: Including PMKID in M1 (16)
*dot1xMsgTask: Dec 04 14:41:33.385:      [0000] 12 b5 fb 72 eb c7 35 2d e4 78 df f8 13 3b a5 77
*dot1xMsgTask: Dec 04 14:41:33.386: 9c:02:98:81:cd:ed Starting key exchange to mobile 9c:02:98:81:cd:ed, data packets will be dropped
*dot1xMsgTask: Dec 04 14:41:33.386: 9c:02:98:81:cd:ed Sending EAPOL-Key Message to mobile 9c:02:98:81:cd:ed
                                                                                                              state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.404: 9c:02:98:81:cd:ed Received EAPOL-Key from mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.405: 9c:02:98:81:cd:ed Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.405: 9c:02:98:81:cd:ed Received EAPOL-key in PTK_START state (message 2) from mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.406: 9c:02:98:81:cd:ed Stopping retransmission timer for mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.406: 9c:02:98:81:cd:ed Sending EAPOL-Key Message to mobile 9c:02:98:81:cd:ed
                                                                                                                    state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.411: 9c:02:98:81:cd:ed Received EAPOL-Key from mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.411: 9c:02:98:81:cd:ed Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.412: 9c:02:98:81:cd:ed Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 9c:02:98:81:cd:ed
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.412: 9c:02:98:81:cd:ed apfMs1xStateInc
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.413: 9c:02:98:81:cd:ed 10.XXX.XXX.XXX 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state RUN (20)
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.413: 9c:02:98:81:cd:ed 10.XXX.XXX.XXX L2AUTHCOMPLETE (4) DHCP required on AP a0:cf:5b:ca:61:d0 vapId 1 apVapId 1for this client
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.414: 9c:02:98:81:cd:ed Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.415: 9c:02:98:81:cd:ed 0.XXX.XXX.XXX L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP a0:cf:5b:ca:61:d0 vapId 1 apVapId 1
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.416: 9c:02:98:81:cd:ed apfMsRunStateInc
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.416: 9c:02:98:81:cd:ed 10.XXX.XXX.XXX L2AUTHCOMPLETE (4) Change state to RUN (20) last state RUN (20)
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.416: 9c:02:98:81:cd:ed 10.XXX.XXX.XXX RUN (20) Reached PLUMBFASTPATH: from line 4942
*Dot1x_NW_MsgTask_0: Dec 04 14:41:33.417: 9c:02:98:81:cd:ed Stopping retransmission timer for mobile 9c:02:98:81:cd:ed
*DHCP Socket Task: Dec 04 14:41:33.802: 9c:02:98:81:cd:ed DHCP received op BOOTREQUEST (1) (len 346,vlan 0, port 1, encap 0xec00)
*DHCP Socket Task: Dec 04 14:41:33.802: 9c:02:98:81:cd:ed DHCP dropping looped REQUEST from DS (encap type 0xec00)
The WLC is a 2112 running version 7.0.235.3
My guess is there is acompatability issue with Android 4.X.

Similar Messages

Finding Both ( and ) open and closed as the same time in grep

Hi,
I have a character style I want to apply to all the () in my document.
In the GREP area, the drop down shows I can select one at a time and make the change.
Is there a way to find both at the same time regardless of how many characters are in between?
thanks
babs

Hi Rodney,
I have an update here.
Ok-so yesterday everything worked great...
Today, it's acting very weird.
I am using the same find and change GREP I used yesterday: To find the (or)
And i am changing it to the character style I made with the baseline shift change. It worked perfectly yesterday, and now it's deleting the ()????
I thought maybe the document might be corrupt, so I made a new one and tried it and this was even worse. I had a bunch of () in the file and asked it to find in the GREP [\(\)] and change to a character style I made and it told me it could not find any?
Even if I chose, document, all documents selection, story, nothing worked???
I trashed all the InDesign Prefs but still no go.
Is this GREP stuff really that buggy or do you think it is something with my software and machine? If you have never seen anything like this, then I will throw up a new forum and try to find out if outers ahve problesm with this stuff.
thanks!!
babs

How to play one clip multiple times at the same time?

I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
myClip.setFramePosition(0);
myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
Edited by: andrasz on Feb 27, 2009 12:37 AM

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

Outlook autocomplete cache stops working for multiple users at the same time

Hi there
Ever since we upgraded our Exchange 2010 to Exchange 2013 we have had problems with the autocomplete cache in Outlook 2010.
We have 700 users and about once per week I get a call about the autocomplete cache. A few users are on cached mode, but most use online mode. The problem appears on both, but it can usually be corrected by /cleanautocompletecache.
Granted, the autocomplete cache gets corrupted sometimes, but it seems to happen a lot for us. I have noticed that often more than one user experiences the problem at the same time, and, since the problem starting after upgrading Exchange, I suspect that
the issue is with Exchange and not Outlook. Yesterday three users complained about the cache at the same time.
I know how to get a broken cache going again - that is not the issue. The issue is keeping this from happening so often.
Anyone out there able to help?
Thanks!
/Anders

Hi ,
Based on my knowledge , when you tried to send an email to a recipient in the same exchange organisation then the recipient address will be resolved in to legacy dn value and then that email will be delivered to destination mailbox by pointing towards to
that legacy dn value.
For the external recipients exchange user the smtp address to get it delivered.
For your issue :
Based upon the NDR message , we need to covert those values in to x500 format and add it to respective recipient mailbox as an x500 address.Then These erorrs will happen if the x500 value of the destination recipient is not available on it's maibox
and that would be the cause of the NDR for most of the times.Some time as you said autocomplete cache would get corrupted on the client end but it is very rare.
How to convert NDR to x500 address format :
http://msexchangeguru.com/2012/03/15/x500/
How to avoid getting such kind of NDR'S :
https://www.simple-talk.com/sysadmin/exchange/exchange-e-mail-addresses-and-the-outlook-address-cache/
In case if you don't want the users to use the autocomplete cache when composing the new emails :
In group policy we can use the office templates to disable the below mentioned option.
1.use autocomplete to suggest the names ---> this option will comes under the advanced settings on the outlook client.
In case if you don't want the users to use the autocomplete cache when composing the new emails as well as if you wanted to delete that autocomplete then you need to choose one more option along with the first one.
1.Empty autocomplete cache.
Please reply me if anyhitng is unclear.
Thanks & Regards S.Nithyanandham

How do you stop multiple users executing the same calc script at the same time?

We have an issue when users uplaod a spreadsheet and then run a calc script. at one time we have multiple exectuions of the script running.
This slows up the system and we have to go cancel all the executions and run it again.
Can we stop this and put them on a queue, so only one execution of the calc happens at one time. Or stop multiple executions getting submitted at all.

You could use EXCLUSIVECALC to stop more than one calc running at the same time, although this will apply to all applications on your server. And it doesn't just stop the same calc being launched twice. Easier than the alternatives I can think of though, if it works for you.

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

Is it possible to have an attachment within a pdf doc print at the same time the main doc prints?

Okay, so this may be kind of a weird question. We have some users who are wanting to add a page to an already existing xml document and correct me if I'm wrong, but I've read that it's not possible to add/delete pages from a pdf that's in xml format. Since that is not possible, I have added the page to the xml document as an attachment. Now what I am wanting to know is if it is possible to have the attachment print out at the same time as the main document. We are using the latest version of Adobe Reader and I have access to Adobe Acrobat Standard 9 & 10 and then I have access to Adobe Acrobat Pro 7. I've been unable to find anyting via google or by searching this forum so hopefully I'll draw out some kind of smart cookies and we'll get this figured out. I appreciate any and all input!
Thanks,

I know of no way to do this with Reader or XML.

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

Is there a way to open different books on various apps at the same time like in android devices?

hello good peolpe, i bought an ipad mini retina for books reading and i would like to know if there is a way i can open a book with different apps like i do on android device where you can use various apps to open differents books at the same time, i would like to also know if there is a way to do the same thing but with power point and word files, and how can i open them on my ipad and transfer them, thanks every one for their time

Currently you can't. Maybe in iOS 8 that will be released soon.
 Cheers, Tom

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

Is there a way to detect two keys at the same time?

Is there a way to detect the keys if the user is holding two keys down at the same time?

yes, but you'll have to check outside of the event loop (i.e. don't check for it in the keyPressed method).
just use an array of keys that keeps track of which keys are currently down and which are up. you could use a boolean array but I use an int array because... Im not sure I've just done it probably because of my C background. anyway, basic setup:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class MultiKey extends JFrame {
     int keys[];
     public MultiKey() {
          super();
          keys = new int[256];
          Arrays.fill(keys,0); // 0 = key is up
          enableEvents(AWTEvent.KEY_EVENT_MASK);
          show();
     public void processKeyEvent(KeyEvent e) {
          // the 0xff below binds the key code to below 256
          int key = (e.getKeyCode()&0xff);
          if (e.getID() == KeyEvent.KEY_PRESSED) {
               keys[key] = 1; // 1 = key is down
          else if (e.getID() == KeyEvent.KEY_RELEASED) {
               keys[key] = 0; // 0 = key is up
     protected boolean isKeyDown(int key) {
          return (keys[key] != 0);
     protected boolean isKeyUp(int key) {
          return (keys[key] == 0);
}so now at any time in your code you can check key state by using the isKeyUp and isKeyDown methods. this is about as close as you get to input polling in java unless you use LWJGL or something similiar ;)
you can try out a full executable example at my site here - just open up the jar and start holding keys down :)

Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

Can I show two angles at the same time in the final edit rather than alternate with Multicam?

Stack two clips on top of each other and reduce the sizes. I think that's what you want.

Can I use Creative Cloud for students on more than one computer at the same time?

I get different info when I read about how I could use creative cloud.
Somewhere it say I can install and activate on two computers but only run the applications on one computer at the time.
On antother place I read that I can use the applications on two computers at the same time.
So what is correct?
Can I install and activa Creative Cloud for students on my PC and my Mac and also run the applications on both computers at the same time?

I already gave you the info you seek, but you don't seem to want to accept it. Here it is in writing from Adobe's EULA (find it at: General-terms)
"4.1 Subscription-Based Software License.
If we provide the Software to you as part of your subscription to use the Services, then subject to your compliance with these terms, we grant you a non-exclusive license to install and use the Software: (a) in the Territory, (b) so long as your subscription is valid, and (c) consistent with these terms and related documentation accompanying the Software. “Territory” means worldwide, but excludes any U.S. embargoed countries and countries where you are prohibited from using the Software or the Services. You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation. However, you may not use the Software on these devices simultaneously."
You appear to want to believe that because you think you have a way of getting around the agreement without being caught it would be okay to do. You are bound to the agreement if you purchase the subscription. Do you understand what intentionally (and with fore-knowledge) failing to honor a contract constitutes?

Deauthentication at the "same time".

Similar Messages

Maybe you are looking for