Debug on sapscript

Hello
how do I debug a sapscript but when my form perfoms a rutine I have...
Inside  the form I have a
perform xxxx in program xxxx.
10nks!!
Gabriel P.

Hi,
GO to SE71..In the menu..UTILITIES -> ACTIVATE DEBUGGER..
Then you debug the sapscript text..
For the subroutine...
But a break point in the program..
BREAK-POINT.
Thanks
Naren

Similar Messages

  • How do we debug a sapscript and a smartform

    how do we debug a sapscript and a smartform.

    hi,
    1) DEBUG Smartform:
    One way to debug smartform is to debug the Function Module of that smartforms. If you want to debug particular smartform node that the solution would be, insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint. So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
    2). DEBUG SAPScript
    They are two ways to debug the SAPScript.
    1). Use Tools - Word Processing - Layout Set (SE71). Enter name of layout set and then Utilities - Activate Debugger.
    It is of no consequence which layoutset you enter when selecting the SAPscript debugger. (Menu path: Tools-Wordprocessing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger.
    2). Another way to set the SAPScript debugger is to run program RSTXDBUG.
    When you debug Print program it is same as you debug any other ABAP program.
    While when you debug SAPScript, you actually debug the code ( scripting) you have written SAPScript Form.
    rgds
    anver
    pls mark points if hlped

  • How to stop debuger in sapscript

    how to stop debuger in sapscript

    Hi,
    before executing the Script, goto SE71, and give the script name and press display, there in the utilites --> Activate Debugger
    or
    You can use the program RSTXDBUG, execute this program program for SAPSCRIPT debugging,
    If you want to Come out from the Debugger, In the menu we an ooption
    <b>Debugger --> Exit</b>    or <b>Press Shift+F3</b>
    Regards
    Sudheer

  • Unreasonable Jumping of Debugging in SAPSCRIPT.

    Hello There,
    PO output (message output NEU), Custom form & Subroutine. Initial creation of PO outputs the required, but when print preview incomplete info at the item's service info (sub details). When debugged it stops at one common hardcoded text & then jumps off to the next item hence making the PO item sub details incomplete.
    Thanks,
    Vinayah.
    Edited by: Rob Burbank on May 3, 2011 11:09 AM

    Hi,
    Can you mention the hardcoded text and the subsequent code.
    Regards,
    Harish

  • Sapscript Debug Medruck

    Hi,
    I have to debug the medruck form for a delivery plan "ME32l". To print the plan, I have to repeat a print message in the transaction "me32l".
    If I now start the sapscript debugger in SE71, it´s not reacting. The form is being printed, but without stopping in the debugger.
    How can I debug this form?
    If I use the print preview for an order in the order transaction "ME23N", it is stopping in the debugger...
    Thank You for Your help!
    Cheers

    Ok, maybe it´s easier for You to try the following, then You maybe can see my problem:
    Go to ME23N and print an order. Therefore create a new message or copy an old one and save the order. Try to debug the sapscript form now.
    I´m nearly sure, the debugger wouldn´t stop.
    The procedure in ME32L is the same... And I know, that form and program are set correctly, cause when I´m doing "blind" changes in the sapscript form, I can see it on the print out...
    Thank You!

  • How can I debug a Tr. Code which is running in background

    I want to debug a Sapscript. Tr. code is 'F110'. In this tr code, two sapscript is running for cheque printing. This Tr Code is running in backgruond mode. I want to debug the Sapscript. How can I do that?
    Regards,
    Subhasish

    hi,
    For a batch job or long running program (SM50):
    Select the program to be debugged
    Menu: Program/Session -> Program -> Debugging
    In the job overview(SM37) you can debug each job with the ok-code JDBG.
    Warning : This is like a restart of the job.
    -> All possible updates will be executed !
    Refer to this link...
    how to debug in program in background
    Edited by: avinash kodarapu on Dec 22, 2008 4:10 PM

  • Debugging of script

    hii guys,
    1. can we debugg form how
    2. can we debugg driver program how.
    regards
    rahul

    hi Rahul,
    <b>They are two ways to debug the SAPScript.</b>
    1). Use Tools - Word Processing - Layout Set (SE71). Enter name of layout set and then Utilities - Activate Debugger.
    It is of no consequence which layoutset you enter when selecting the SAPscript debugger. (Menu path: Tools-Wordprocessing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger.
    2). Another way to set the SAPScript debugger is to run program RSTXDBUG.
    When you debug Print program it is same as you debug any other ABAP program. While when you debug SAPScript, you actually debug the code ( scripting) you have written SAPScript Form.
    <b>Check this link:</b>
    /people/sudheer.junnuthula2/blog/2007/01/09/script-debugging
    Reward me if useful...........
    Harimanjesh AN

  • How to debug script

    1) i heard that we have to put layout in debug mode and then go to print program and execute it also in debug mode.
    am i right?
    2)where do we check like compilation errors in layoutset.

    One way to start the script debugger is:
    Se71->utilities->activate debugger.
    This may be a time-consuming process. Instead, open a session and execute the program RSTXDBUG. Even if you follow the above menu path to activate the script, it will internally execute the program RSTXDBUG. So you are saving some time in going through all of the above processes.
    2. Generally SAP script contains the Layout and corresponding print program.
    First go to SE71 and enter ur script name. In the same screen go to Utilities->click on activate debugger option.
    Now go to SE 38 and enter ur Print Program name and execute the program.
    Now you can debug the script Page wise and window wise.
    RSTXDBUG - SAPScript debugger
    Debug SAPScript
    You can debug a SAPScript: Use Tools - Word Processing - Layout Set.
    Enter name of layout set and then Utilities - Activate Debugger.
    It is of no consequence which layout set you enter when selecting the SAPscript debugger. (Menu path: Tools-Word-processing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger. This is quite handy when verifying which layoutset is being called (Verifying customizing settings).
    Another way to set the SAPScript debugger is to run program RSTXDBUG.
    When a Form is copied from one client to another .And If U try to display or change the form in the copied client .The possible error message cud be :
    1.Form not found
    Try coping again specifing the language .
    2.IF IT dispalys an error message saying That the text file is inconsistent .
    Then go to SE38 and Run “RSTXCHKO” .
    It will ask for the form name ,then check all the checkboxes and then run the program.
    Note : all Script related problems can be solved using Program ‘RSTX*’.
    Reward points if this Helps.
    sanjay

  • How  to debug BDC , Dialog program and Script

    Hi all,
    Please let me know, how to  debug BDC , Dialog program and Script
    Thanks&Regards
    Devi

    <b>SCRIPT DEBUGGING</b>
    When we want to debug the SAPSCRIPT, we need to first activate the debugger, we have 2 ways to activate the Debugger.
    1) Execute the program RSTXDBUG
    2) Go to SE71, from the initial screen enter the form name and press Utilities --> Activate Debugger
    When we are in the Debug screen,
    3.1) F5 will be debug filed by field, that means if a single line is having 5 fields, if we press the F5 this will do field by field,
    3.2) F6 will be line by line, that means when we press the F6, it will debug the line and it will go to the next line. F7 also do the same way
    3.3) F8 will be very useful when we have any include statement in the SCRIPT, if any include is there and we press the F5 or F6 then this will go that Include (normally SO10 or any transaction text), then if we want line by line debugging then we can press the F5 or F6, or if you want to execute that in a single shot then press the F8, then the debugger will be executed that include and come back to the Script debugging.
    Some times in the script, we may right lengthy lines, if we want to debug that whole line, we have an option called Left/Right, this we will find the Debug screen of the script, there is a Push button, we can make use this button to debug.
    We can put the breakpoints in the SCRIPT DEBUGGER also, just press the BREAKPOINT Pushbutton from the debugging screen or press EDIT --> Breakpoint
    If we want to debug the print program from the SCRIPT DEBUGGER, just press SHIFT+F7 or EDIT --> ABAP Debugging
    If we want to see the Windows which are defined in the forms, just press the Go to --> Form --> Windows .if we want to see the pages go to --> Form --> pages. Here we have an option to see the page wise window also go to --> Form --> page Windows
    If we want to see the paragraphs which are defined in that script, press go to --> Styles --> paragraphs. 
    If we want to see the Character formats which are defined in that script, press go to --> Styles --> Character Strings. 
    If we want to see the Page formats which are defined in that script, press go to --> OTF --> Page.
    If we want to see the Elements which are used in the Script, then press go to --> Text Elements --> Form Elements.
    If we want to see the commands which are used in the script, press go to --> Commands --> List
    Finally, if we want to exit from the SCRIPT DEBUGING, simply press Debugger --> Exit
    <b>DEBUG BDC</b>
    ust go into debugging mode and do the BDC step by step, when it comes to the Call Transaction line, check the mode which will be 'N'....Now, overwrite this with 'A' and execute the BDC...It will run in All Screens Mode....
    As suggested above the MODE 'A' will do the trick as it takes you to all screens.
    Normally MODE N will be defaulted as it will be used for background processing,
    Here is a simple tip,
    This will be the call transaction part of the program,
    CALL TRANSACTION 'IW32' USING BDCDATA MODE 'N'
    MESSAGES INTO MESSTAB.
    I would suggest you to make it like this,
    DATA: V_MODE TYPE C VALUE 'N'.
    *<In debug mode set V_MODE = 'A' for debugging>
    CALL TRANSACTION 'IW32' USING BDCDATA MODE V_MODE
    MESSAGES INTO MESSTAB.
    This will be very useful because you just need to change the value of the V_MODE at runtime as A for debugging besides it has N which is the default to be used. (i.e. you need not change the code again and again).
    This will be very useful when you have to debug some program in QA or PRD servers.
    regards,
    srinivas
    <b>*reward for useful answers*</b>

  • SAPscript unit of measurement (UoM) changed during print

    Hi Experts,
    I am doing my SAPscript and its print program for Invoice printing (VF02/VF03). The problem only occurs when its UoM is BOX. It will display in the Invoice printing as '012' instead of BOX. When I debug in the print program, in structure VBDPR (field VRKME), it has the correct UoM which is BOX. When I debug my SAPscript, it will give me 012 as its UoM!! I don't know what is the reason behind this behavior. Please advice.
    Points will be given....Thanks in advance.
    Regards,
    Fauzah.

    hi
    For all other UoM is it coming correct ?
      there is two table fields for UoM MEINS n GEWEI , check which one ur displaying in Sap Script.
        try with do change in that field , thic can solve ur problam .

  • Debugging the scripts and smartforms

    Hi,
    Please Tell me How to debug the SAP SCRIPTS and SMARTFORMS.
    Thank in advance
    Ajay

    DEBUG Smartform:
    1) One way to debug smartform is to debug the Function Module of that smartforms.
    If you want to debug particular smartform node that the solution would be,
    insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
    So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
    2) SFTRACE can be used for debugging SMARTFORMS.
    Read More here.
    http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    Re: How to Debug a Smartform
    Debug of smartform and sapscript.
    Debugging SmartForms
    LOGO on Smartform
    1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
    2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
    3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
    4) Select any picture and set its Resolution in DPI
    5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
    6) Set any other parameters if required, save and activate.
    7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
    8) Use TCode SE78 to upload new pictures and logos.
    look at Thread Dynamic Graph in smartforms
    Refer the links also -
    Re: Dinamic Graph in smartforms
    How to get file perperties in Unix server
    SMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
    For debugging -
    1. Write BREAK POINT in the code window.
    2. Put a break point on the call function in the driver program
    3. Put a break point in the generated Function module.
    OR
    1) DEBUG Smartform:
    1) One way to debug smartform is to debug the Function Module of that smartforms.
    If you want to debug particular smartform node that the solution would be,
    insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
    So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
    2) SFTRACE can be used for debugging SMARTFORMS.
    Read More here.
    http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    OR
    Four ways you can debugging.....
    1.place SFTRACE inplace where we enter T_CODE and press ENTER.
    after that press F8.
    2 ./H
    3 /SH
    4.after generating the function module there is a button DEBUGGING
    Refer to these related threads
    smartforms debug
    Smartforms debug
    How to debug Smartforms?
    How to Debug the Smartforms
    Re: Smartforms Debug
    Smartforms
    In the Smartform, within the Code Node you can hardcode a normal abap Break Point ..
    Please set a break point in side the smartform:
    BREAK <USERNAME>.
    Then at the time of print/ preview the program stops there.
    Example : If you set the break point in initializationas
    BREAK <USERNAME>.
    Program stops at break point. After that use Serach and set more break points.
    >Search the program logic/Textelement/Address via search and set the break point at that code.
    Other way to debug smartform is to debug the Function Module of that smartforms. If you want to debug particular smartform node that the solution would be, insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint. So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
    or
    SFTRACE can be used for debugging SMARTFORMS.
    http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    See the Below thread for how to debug the Smartforms
    How to Debug Smartform?
    Re: debug of smartfrom
    Smart forms
    They are two ways to debug the SAPScript.
    1). Use Tools - Word Processing - Layout Set (SE71). Enter name of layout set and then Utilities - Activate Debugger.
    It is of no consequence which layoutset you enter when selecting the SAPscript debugger. (Menu path: Tools-Wordprocessing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger.
    2). Another way to set the SAPScript debugger is to run program RSTXDBUG.
    When you debug Print program it is same as you debug any other ABAP program.
    While when you debug SAPScript, you actually debug the code ( scripting) you have written SAPScript Form.

  • SAPscript write form skips my first record

    Hello experts,
    I am currently debugging my SAPscript and I found out that on the first run one of my WRITE_FORMS seems that it skips the first record even though I have conditions both on the window and the report program. So in effect, what happens is that the valuy in my KOPF window that is supposed to be intended for the first page is based from the 2nd page! for example, on the main window, line item one is displayed, so the value in the KOPF window must be dealer 1 but it is displayed as dealer 2.

    Hi Viray,
    u need to set breakpoints in the loop and then c the values of the variables that u r passing to the script at the point of WRITE_FORM.. just check if a NEW_PAGE is getting triggered before u have written anything in the script..this u can do by activating the SAPSCRIPT debugger at the same time..in sapscript debugger it shows u the page number, window and the current Element..so u can know bit by bit wats happening in runtime.. this will definitely take some time, but then it also helps in the long run to understand how exactly data flows from program to script an also how the commands in the script work..
    Hope it helps,
    Regards,
    Bikash

  • Error - No SAPscript message exists

    Hi,
        I am try to print a sales document into form, Gettin the following fatal error - No SAPscript message exists.
    TD 000: No SAPscript message exists
    Any one came across this error.
    Cheers
    Senthil

    Hi,
    R u using The Print_TEXT FM?
    Then Go through the following link.
    [http://help.sap.com/saphelp_nw04/helpdata/en/d6/0dba00494511d182b70000e829fbfe/frameset.htm]
    If not then try to debug the SAPScript and Check in which Fm u r getting the error.
    Regards
    Sandipan

  • SAP script  & smartform debugging

    Hi experts
    can u plz give me the step by step procedure  for debugging the SAP script and smartform
    regards
    venkat

    Hi,
    They are two ways to debug the SAPScript.
    1). Use Tools - Word Processing - Layout Set (SE71). Enter
    name of layout set and then Utilities - Activate Debugger.
    It is of no consequence which layoutset you enter when
    selecting the SAPscript debugger. (Menu path:
    Tools-Wordprocessing - Forms, Utilities - Activate Debugger)
    The next layoutset called will invoke the debugger.
    2). Another way to set the SAPScript debugger is to run
    program RSTXDBUG.
    When you debug Print program it is same as you debug any
    other ABAP program. While when you debug SAPScript, you
    actually debug the code ( scripting) you have written
    SAPScript Form.
    DEBUG Smartform:
    One way to debug smartform is to debug the Function Module of
    that smartforms. If you want to debug particular smartform
    node that the solution would be, insert a "Program Line" just
    above the node you want to debug and this program line write
    a normal abap breakpoint. So whenever you call the
    smartforms, it will stop at this breakpoint and you can debug
    onwards.
    another way is SFTRACE can be used for debugging SMARTFORMS
    for details refer this link:
    http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    rgds,
    latheesh

  • Transaction F110 - Payment Run

    Dear Experts,
    I am using transaction F110 to print payment advise. I have copied the standard SAP script the associated  driving program  is RFFOEDI1. Further  I am using user exist in the SAPscript ie PERFORM  AND ENDPERFORM.
    I wanted to debug this Sapscript and also  custom program used in the layout set.
    Since transaction runs in background I have inserted  the following code in custom program
    Do
    if flag = 'X'.
    exit.
    endif.
    enddo.
    I have activated the debugger in SAPscript
    After maintaining all the parameters in F110  tried to run RFFOEDI1 in foreground.
    I have put break point in SE37 "open_form.
    None of the above techniques  does not work so far NO JOY at all..
    Could you please throw me light on this .
    I appreciate your time and help in this regard
    Many thanks in advance.
    cheers
    chandra

    Hi Seshu,
    I looked at configuration under FICO company level everything maintain in chinese (ZH)
    I have really exhausted all the resources. I am resolving this issue early.
    Any further help regarding this would be appreciated.
    Cheers
    chandra

Maybe you are looking for

  • Problem IDE

    I possess a badge mother K7N2 Delta-L and I have problems with the DVD and the CDRW. I Have connected the hard disk as master primary ,CDRW  as primary slave and the DVD like secondary master. My os. it is Win XP and there are times that the units CD

  • 3g ipod 20G with firmware 2.3 shutting down pc

    day 1: copying new songs to ipod via itunes 7.0.1.8 > blue screen on XP, pc shuts down to prevent damage result ipod info says: 0 songs, 6,5 gig free, ... the songs are still there but i cannot acces them... day 2: five r's, resetting, no changes, bl

  • Does Logic has a divide (strings divisi) signal (midi) command?

    I am working on a string orchestra piece and use a lot of divided string parts. I was wondering if Logic knows a command or way to automatically divide a strings section like 1st violins into two. For example, in Finale 2010, the notation program, wh

  • Lightroom CC does not support Intel HD 3000 on MacBook Pro - please add support !!!!

    Installed the new Lightroom but it does not support the graphics on: MacBook Pro (13-inch, Early 2011) OSX 10.10.3 (actual version) Intel HD Graphics 3000 512 MB I see that Intel 4400 is required in Adobe Photoshop Lightroom Help | Lightroom GPU FAQ,

  • DIFFERENCES IN BACKFLUSHING.

    Hello SAP Gurus, Please tell me the differences between backflushing in discrete manufacturing and REM Backflush. Looking for your early feedback. Regards, Kaushik.