Decimales en moneda ARS y PEN

Buenos días Foro.
Quisiera saber cuantos decimales utilizan en sus instalaciones de SAP, en las monedas ARS - Argentina y PEN - Perú.
Gracias por la información.

Hola Luis:
Te comento que el estándar es usar dos decimales, en la compañía en la que actualmente laboro no tenemos plantas en esos países, pero en México, Guatemala y Colombia que es donde tenemos plantas se usan dos decimales.
Saludos Antonio Martinez

Similar Messages

  • Currencies with 5 decimals

    Hi,
    For pricing reason, I need to define 5 decimals in some currencies (USD, ARS, EUR and DEM). I was reading some information about it, and the solution I found is to create one Z currency for each estandar currency (USDN, EURN, AR5 and DEM5).
    I am not sure about the problem this procedure can cause in the system. Suppose that the local currency is USD, so I will have the SD invoice in USDN. The document will be managed as a document in foreing currency. I wondering if I will also have rounding differences in the cIearing document, and for some report I will have to adapt the information.
    Does anyone have implemented this solution?
    Which problems can cause?
    Any recomendation about that?
    Thanks,
    Cecilia

    Hi,
    check the following threads:
    Currency in 5 decimal places.
    Custom Table Currency field with 5 decimals
    Any changes you going to made in OY04 is affecting cross clients.
    It is NOT recommended that when postings have already been made, that a
    change in the currency be done, as amounts posted can become invalid or
    incorrect as a result which is most critical in production environment.
    The decimal places setting in OY04 is limited to 5. It is not possible to set more decimal places in standard SAP.
    Technial explanation is also described on note 434349, 137626 and 126857
    Hope this was helpful for you.
    Regards,
    Cristiano

  • Diferencia entre decimales

    Jóvenes expertos tengo el siguiente problema que al momento de crear una factura de venta siempre me resta un centavo del valor de la factura ej. valor de factura es de 2,000.00 pero en la factura de sap me refleja 1,999.99, como puedo solucionar esto.
    Ya coloque los decimales a 4 dígitos y ni así me funciono.
    De antemano agradezco su ayuda el respecto.

    Gracias David, con tu primera pregunta de que si existe conversión de moneda la respuesta es "No", pude ver que la diferencia es cuando hace el calculo del Impuesto sobre el valor agregado que es acá en Guatemala, al valor  neto le quita un centavo ej:
    el precio del producto es de 1.100.00
    Precio producto sin Impuesto 982.1428
    Cantidad del producto 2
    Impuesto 117.8571
    Total del documento es de 2,199.99
    Como podrás ver me quita un centavo del total de la factura.
    Con tu segunda pregunta es "No" también no tengo descuentos.
    Con tu pregunta del revisar el redondeo este activo en la propiedades de SAP si lo tengo seleccionado pero en la Propiedades de Moneda lo tengo Sin Redondeo y en decimales Valor de Propuesta.
    Espero me haya dado a explicar.
    De antemano muy agradecido por tu ayuda.
    Edited by: cjpgrajeda on Feb 17, 2012 7:22 PM

  • Decimales en norma de Repartos

    Hola
    Estimados
    Es posible generar las normas de reparto con decimales, cuando las configuro sistema siempre las redondea..Cual es el parametro que controla esto???
    GRACIAS! como siempre
    Sldos
    Oscar V

    Estimados
    la configuracion para que las normas de remarto sean con decimales, en los parametros generales, el importe debe tener decimales. Aunque esto puede traer problemas en la totalizacion de los documentos cuando la moneda es sin decimales.-
    Sldos

  • Feature to disable touch screen when pen is detected is no longer available in windows 7

    In N-trig drivers  with windows vista there was an option where one could select the option to disable the touch input when pen in near the screen.  That feature is no longer available when I installed new n-trig drivers in win7.
    I use my tablet a lot to take notes. But with dual mode on it detects input where I rest my palm on the screen to write. Every time I have to go and disable touch input completely before I start writing and enable after I finish. 
    I there any way to enable auto mode with Windows 7 n-trig drivers?
    This question was solved.
    View Solution.

    Thanks for your reply.
    I talked about this with HP tech support and they don't know anything about it. I don't even know whether they are qualified enough to provide support. They were just blaming the problems on Microsoft and N-Trig. I knew the problem is with the drivers and I wanted them to let N-Trig know that people like us are waiting to the Auto feature. But instead of considering my complaint they hung up on me not once but twice.

  • LACK OF FULL PEN TOOL FUNCTIONALITY WHEN CREATING A SHAPE LAYER

    Hello, I'm going through Chris Meyer's video course on being an AE apprentice and have spent over an hour on the following issue.
    Here is what I know.
    I know I am trying to create a shape layer, not a mask, to create a frame to surround the video of the green field on the attached screenshot.  Therefore, I pressed "F2" to make sure I am doing so.
    I want to define the borders of this picture frame by using the pen tool to draw a path on the layer entitled "Windy Peak".
    I have highlighted that layer in my timeline.
    This video was pasted on to a placeholder shape that I had created using Command Option "/" on my Mac.
    I do have limited use of the pen tool, because it displays properly when I hover it above the borders of the video to be framed.
    But I lack access to the toolbar controls I want to complete my assignment.
    For example, I would like to create a gradient to define the internal coloration of this frame, but I have no use of the eyedropper when I click on the Color Picker.
    Also, I am unable to access or manipulate any of the standard fill or stroke options for use of my pen.
    This is what I know.  
    Thanks for your help!   Matt
    Message was edited by: Matt Dubuque to add the fact that the video had been pasted on to a placeholder shape image by pressing Command Option "/" on my Mac.

    Thanks for pitching in Todd and Rick, I appreciate it very much.
    As previously stated, I do have use of the pen tool, but it only has limited functionality as demonstrated by the path I created on the green meadow.  My Tools Panel remains activated .
    My core problem remains that I am unable to adjust the fill or stroke settings for my pen.
    I have tried changing and resetting various work spaces and this has not helped.
    I'm scratching my head here.
    Matt

  • Pen-drive recovery from bitlocker

    Hello , i secured my pen-drive with bit-locker and i forgot my password and lost my recovery key . I have a lot of important files in there , please help me recover it.

    Hi,
    Like Aaron said, sorry, but unless you remember your password, your data is unfortunately lost.
    The entire point of encrypting your data is that no one but the holder of the password has access. If there where an easy way to bypass the encryption, there would not be much point to it.
    Karen Hu
    TechNet Community Support

  • Capture with new MBP, plus Pen Tool Question...

    Good Day everyone, I've searched the forums but have not been able to find my answer so I thought I'd post.
    Question 1...
    I've just received my new 17"MBP a few weeks ago. With my old PB, I would connect my camera via FW400 and capture the footage to an external LaCie drive via FW800 out of the computer.
    Now with only one FW port on the MBP, it looks as though I need to capture via FW800 (4pin to 9pin) and go out to the LaCie via USB? Is this correct? How are any of you doing this. It bums me out that I can't go out FW800 to the drive. I suppose there is always the option of getting an Express Card 34 with FW800 connections?
    Question 2...
    Why can I not get my pen tool to work in the timeline? I want to adjust opacity and audio levels but am unable to do this. My old version of FCP (v5) seemed to let me do this. Overlays are 'on'? Any suggestions? I find it easier and faster to be able to do these functions from the timeline, there must be a way?
    FYI...
    New 17" MBP 2.66 w/4GB RAM
    FCP (Studio2)
    I'm sure question 2 is just something stupid that I just haven't set up.
    Appreciate everyone's help as always!
    Rene.

    To be honest, nobody but Apple knows what Apple is thinking but usb is not a good alternative. I also don't know of too many professional post houses or broadcast studios that have anything to do with firewire infrastructure at all. You can get firewire 800 to firewire 400 adapter cables for cheap, search the internet. You can then daisy chain your camera/capture device in line with your storage device.
    The better alternative is to get a express firewire card for your MacBook pro as you mentioned which would create two firewire buses; one for capturing, one for storage. Again, you can search the internet and here's a place to get you started http://eshop.macsales.com/item/Sonnet%20Technology/FW800E34/
    I guess I would have thought maybe some research into a product of the expense of the MacBook Pro would have warranted some research about these things.

  • X200 Tablet - Wacom Pen Blue Screen of Death on Windows 7

    Hello...hopefully someone can help & point me in the right direction...I have a Lenovo x200 tablet PC (Stylus Only Version) - and recently installed Windows 7 Professional (64bit)
    The OS install went perfectly...Once installed, I did all the Systems Updates for Windows 7, including all the updates for Lenovo using System Update 4.01.....However, I have an issue that I cannot seem to figure out...
    PROBLEM # 1
    The biggest issue I now face is, whenever I put the Digitized Pen next to the Tablet Screen within 2 seconds I get the 'Blue Screen of Death'....and it automatically Reboots....This ONLY happens when I touch the Pen to the screen....
    I uninstalled the 'Wacom Drivers' - within the Device Manager, which i assume were installed by the system update(s)....After, uninstalling the issue of the 'Blue Screen' from happening when the pen touches the screen is gone.....However, I have no way of being able to use the Pen...it does not show any cursor or inking....Is there a specific DRIVER that I should be installing on my own to make this work properly - without getting the 'Blue Screen of Death' each time?....I really need some guidance on this issue. 
    PROBLEM # 2
    My Second issue, which is suddenly occured after day 2 of installing updates is the Lenovo System Update 4.01 -- Suddenly, after working on day 1 - now, whenever i try to 'Check New Updates' i get a popup that says "An error was detected with the Package catalog for your system on the System Update Server. Please contact the Support Center".
    I called techical support on the phone - and they made it seem like this was not their problem and they could not help me...The odd thing is, that this was working before, and now all of sudden it doesnt work...
    If someone can please advise me on what to do, especially with the Pen Driver problem, I would greatly appreciate it....Thanks!
    Solved!
    Go to Solution.

    **FIXED IT** TWICE!
    I've been messing with this on multiple machines at my school.
    I was getting the BSOD, "no tablet installed" all that good stuff.
    I installed this, that and the other thing.
    After testing another machine, I read something in the BSOD that caught my attention.
    It mentions resetting the cache of the BIOS. I wasn't sure what that meant, or how to do it.
    But I was able to get into the BIOS (F1 on the Lenovo splash screen) and I just tapped F9 (load default Bios options -paraphrasing) Then I hit ESC- it prompts to save the settings, agree and let the computer continue to boot.
    I was able to test the Pen at the login screen. Just repeated this process on another X200 computer and it worked again.
    Try it.
    Good luck!

  • Just bought Windows 7 for my HP tablet- disaster pen does not work

    Windows 7 came out today and I saw a good review of improved pen input so I thought I would install it on my Pavilion tx 2000 which I have had running Vista Home Premium since June 2008.
    Upgrade installation succeeded, except I was told to delete the DigitalPersona fingerprint recognition (no great loss) and HP Quicklaunch Buttons (slightly annoying) for reasons of incompatibiltiy.
    All went well until I started using the pen. It functions but not is usable since when I hold the pen over the screen the mouse pointer jumps around like a mad thing and when I press to click, it usually thinks there are two clicks, with obvious problems. 
    I have done all the sensible things like so a complete HP update before I started etc - what is the problem?  Is there some driver update I need?

     The following driver fixed the pen and touch screen issues on a tx 2500.
    http://h10025.www1.hp.com /ewfrf/wc/softwareDownloadIndex?softwareitem=ob-58776-1&lc=en& dlc=en&cc=u...

  • HP Revolve 810 - HP Executive Tablet Pen Does Not Work

    Any suggestions as to how to get the Revolve 810 to recognize the Executive Tablet Pen in "tablet mode" to be able to take handwritten notes in an application like Microsoft One Note? I have been unable to get my HP Executive Tablet Pen to work with One Note since I purchased the laptop approx. a month ago?
    Any pointers/suggestions will be most appreciated.
    Thanks.

    He mentioned that it was a Revolve 810. That's an Enterprise product.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

  • ThinkPad Tablet 10 (TPT10) digitizer pen does not work

    I have a new TPT10 that came with the ultra keyboard and digitizer pen. Pen is completely unresponsive, touch screen works fine. TPT10 is fully updated with both Msoft and Lenovo software/drivers. 

    did you ever get this resolved?  I have the same problem.

  • How to activate a pen tablet on photoshop on a All-in-one computer [touch screen]?

      I have a all in one computer touch screen- and I can use a pen tablet right on the screen, it's active- but when I go on PSCS6 and try to use the pen tablet, it is not active onto the screen- where do you go to activate it?? Can you?

    That is the question I asked you.  I think you will find that your display only functions as a touch device.   My old Wacom Intuos 3 Tablet was just a tablet device.  My new Intuos 5 Touch is both a Tablet and touch device. When the pen is in close proximity with the tablet surface touch is turned of and it functions as a tablet.  The Wacom device driver has some Touch functions the can be configured to work with Photoshop.  I could configure touch so I could finger paint in Photoshop. Photoshop does not have its own touch support and touch settings.   If you can find a device driver for your displays touch feature that use wintab api. to support a pen interface you may have a chance,

  • Issues with the Surface Pro 3's pen in Photoshop CS6

    I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
    However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
    The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
    It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

    If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop,  You shoule  Isstall Photoshop CC 2014 on your surface Pro 3.  It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
    If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3.  In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder.  To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
    You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome.  You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
    The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
    A couple of touchkey overlat keyboards could look something like this

  • Photoshop CC on Sony's Vaoi Fit15A (pen pressure problems)

    This question is very specific. I just downloaded the trial version of Photoshop CC on a new Vaoi Fit15A. It's like a hybrid between a tablet so I can supposedly draw on the screen directly. (So I don't have a pen tablet.) My problem is it doesn't register the pen pressure. I also tried borrowing a wacom bamboo to see if it can feel that, but nope, PS CC still won't recognize the pen pressure even from a pen tab. What should I do? Thanks to anyone who can help!

    Hi! Thanks so much for replying
    I tried attaching a bamboo create to see if it could sense the pen pressure. Alas, it still couldn't. I already installed the drivers but it still wouldn't.
    So um, just letting you know that I did take it to the store where I bought it. They told me that Adobe wasn't keeping up with something something industry-wise. Sorry I'm in Japan and my Japanese isn't that good but basically they told me that I have to wait for Adobe elements 12 (which isn't out yet) before I can hope that my Vaoi recognizes the pen pressure. So they basically told me that Vaoi fit15A, using PS CC, isn't compatible. There's no way I can get pen pressure using that program.
    But is this true? Adobe is late that's why I can't get it to work in Vaoi Fit 15A ? They just didn't tell me this because they couldn't get it to work right? When is this "Adobe elements 12" suppose to come out anyway? If I can't get it to work I'll have to return the Vaoi itself since I need my pen pressure working in PS.
    Thanks for your time!!!

Maybe you are looking for