Decision between multiple alternatives

Hi,
Can i use the function like this
MONTH_QUARTER1( '0calmonth' ) = 1 where 0calmonth is a infobject either in DSO or cube.
When I checked , syntax is correct.
Can anyone tell me whether I can use the infobject like ocalmonth or 0calday.
Thanks in advance!

This will work. You cannot use 0CALDAY directly because the data needs to be in the format YYYYMM. So, 0CALMONTH will work directly, but 0CALDAY will need to be converted first:
MONTH_QUARTER1( DATE_MONTH( 0CALDAY) )

Similar Messages

User Defined function in "Decision between multiple alternatives"

Hello,
I am looking to create my own User Defined function in the formula builder of the process type - "Decision between multiple alternatives" in a process chain.
Could anyone advise please how this can be done?
Many Thanks,
Abhijit

Hi Abhijit,
Where you want create you own user definefunction in Intergation planning or some where else.
Please specify your requirement.
Thanks and Regards,
Venkat.

Decision Between Multiple Alternatives-Process Chain Formula

Hi,
I need to write a formula in the process type 'Decision Between Multiple Alternatives'.
If the current date is on the end of month then i need to trigger a monthly snapshot dataflow if not then daily dataflow needs to be triggered.
Anyone have any idea of how to write a formula for this?

You can check both of these docs which defines how to use 'Decision Between Multiple Alternatives' process type:
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae&overridelayout=true]
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301fb325-9d90-2c10-7199-89fc7b5a17b9&overridelayout=true]

Decision between multiple alternatives process type

Hi All,
I want to use this process type "decision between multiple alternatives" in one of my process chains, but i want use this process type if the DELTA infopackage pulls ZERO records, skip the next process and more than ZERO records continue the process.
Please suggest me is it possible anyway.
Thanks a lot in advance.
Regards,
Ravi Kanth

Hi,
You can't do it with Decision type process as the conditions allowed are standard System conditions. As Suggested above, you need a code before that. The logic can be sketched as :
1. Load the provider.
2. Obtain the latest request in the provider.
3. Get the data from the request (std SAP prog is available for reading from providers).
4. Raise error upon getting no data (in this case you need to put the steps to be skipped in another chain and use in the main chain as meta chain).
--Akashdeep

Decision Between Multiple Alternatives in Process Chain

Hello all!
I wanted to use the process type "Decision Between Multiple Alternatives" in a process chain, so than i can choose wich DTPs will be executed. I was wondering to use the Function "PREDECESSOR_PARAMETER (<I_FIELDNAME>, <I_LOW_OR_HIGH>, <I_NUMBER_OF_VALUE>)" to get a parameter from an ABAP program step, but i do not know which I_FIELDNAME parameter should i use to receive the parameter. Did anyone use this logic or something similar? Do you think there are better ways of doing this?
Thanks in advance and Best regards,
Nuno

Hi,
The decision process type allows you to determine a set of conditions
For more info go though the below link , as they have explained step by step with screenshots
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301fb325-9d90-2c10-7199-89fc7b5a17b9&overridelayout=true
Regards,
Marasa.

Decision between multiple alternatives -question

Hello all,
I have some doubts about process Decision between Multiple Alternatives, from RSPC transaction.
The problem is like this:
1. I have one main process chain.
2. I have the process decision between multiple alternatives, in this main chain, after start.
I choosed formula and I put an if (as in the code below). Then I put the WORKINGDAY_MONTH
In it I want to test to have the 19-th working day of the current month , factory calender ' 01'.
If I have this day I want , I want to raise an event.
IF( WORKINGDAY_MONTH( Current Date, '01', '' ) = 19, 'ZEVENT_WD', 'ZEVENT_ERROR' )
This event would be usefull so I can start with it a second chain(inserted in the main chain).
The system says (when I check my formula) that it is sintactically correct, but incomplete.
Any clues why this message apears ?
I don't know if it is ok to put the events like that in my IF (one to start the subchain and one as error).
Thank you a lot.

Hi,
The decision process type allows you to determine a set of conditions
For more info go though the below link , as they have explained step by step with screenshots
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301fb325-9d90-2c10-7199-89fc7b5a17b9&overridelayout=true
Regards,
Marasa.

How to use the 'Decision between multiple alternatives' Process variant

Hi ,
Can anyone tell me how to use the 'Decision between multiple alternatives' Process variant in BI 7 Process chains ?
The requuirement is that I have a DSO eg DSO 1 from which i have to load DSO 2 and DSO 3 . Now if the number of Records in DSO 1 are < 100 i will load DSO 2 from DSO 1 else i will load DSO 3 from DSO 1 .
So in the PC i have used a 'ABAP Program' variant (which counts the number of rows in DSO 1) after loading DSO 1 and after this 'ABAP Program' Variant , i have used the 'Decision between multiple alternatives' Process variant. Problem is it is giving me only some some system fields in the formula , like sy-datum or sy-timlo , which are of no use here .
It would be great if i can receive some help here .
--Devraj

in RSPC you create a ABAP processing type "ending with specific values".
We use true or false for things as you specify.
your abap program should return a true or a false to indicate which of the situations is applicable.
Is this helpful?
Marco

Use ABAP code in "Decision Between Multiple Alernativesu201D in process chain

Hi, does anybody know if it is possible to include ABAP code in formula definition when using u201CDecision Between Multiple Alernativesu201D in process chain.
I wanted to read a specific parameter from one table in order to choose the next step in the process chain.
If it is not possible, do you any workaround?
Best regards,
João Arvanas

Hey. You could create your own custom formula which you would code. Then that formula is reuseable in the formula builder. That should get you where you need to be.
Here is a document on how to implement the custom formulas:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f095592f-42f7-2a10-6ab1-c836a559b48f?quicklink=index&overridelayout=true
Hope this helps.
Thanks

Intracompany STO between multiple plants

Hi Experts,
What should be the easy way of setting up STO between multiple plants via delivery. I've 15 plants defined here under a single company code and any plant can transfer goods to all plants. So should I maintain this settings at "Assign document type" factorial 15 times i.e., xxxxxxxxxxxxxxxxx times?
Please help. what should be the easiest way?
Thanks,
Rajoo

Do you want to create STO po between all 15 plants? Every time you create STO? Why don't you go for MB1b with movement type 301 or 303 and 305. Alternatively you can think about using special procurement key in MRP-2 view for direct withdrawel from the alternate plant.
But if you want to do STO between all plants then you need to give all possible combination with document type in config, you have no other alternate
regards
Antony

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

I setup messaging on my verizon, however I have multiple lines on the account and it is showing messaging only for one phone line. Is there a way to toggle between multiple lines on the myverizon site?

How do I toggle between multiple phone lines while on the myverizon website in regards to messaging?

The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups. Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

HT1198 If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own

If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own iPhoto application??

Have you read this Apple document regarding sharing a library with multiple users: iPhoto: Sharing libraries among multiple users?
OT

Any improvements in sharing an iPhoto Library between multiple users?

It is possible and Apple Approved to share an iPhoto Library between multiple users, but the Library must be stored on a drive or disk image that ignores permissions:
http://tech.kateva.org/2008/10/apple-supports-multi-user-iphoto.html
This doesn't work for me. Has Apple changed anything with iLife '09 to make it easier to share a Library? For example, have they changed from the prior Package format?
Message was edited by: jfaughnan

Alternatives to a trip to the Terminal:
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. The problem here is that OS X works very hard to keep your data safe and secure from the other users. You're trying to beat what's built in to the system. So, to beat the system
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a Disk Image or even partition your Hard Disk.
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Lastly: This method seems a little clunky at first, but works very well. Most importantly, it uses the System to do the job for you.
Create a new Account on your Mac, call it Media. Create an iPhoto Library there. (BTW: This will work for iTunes too.)
Enable Sharing on the Library:(Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other accounts. In those accounts, enable 'Look For Shared Libraries'. The Library will appear in the other source pane.
This means that both users will be able to see the pics. If you want to use a pic then simply drag it from the shared Library to your own in the iPhoto Window. This means that each user can have their own edits.
If you want to add photos to the Library: Log into the Media account for that purpose.
To make it all seamless: Set your Mac to log into the Media Account automatically. Set iPhoto to launch on log-in. Then switch to your own account using Fast User Switching.
Net result: a Library that's permanently available to all users but also protected. Each user can have their own versions of the pics if they want.
No partitioning, no permissions issues. Uses no extra disk space. What's not to like?
Regards
TD

Question/Problem Sharing iTunes Library between multiple users

Hello all,
I have a question (potential problem) regarding sharing an iTunes Library between multiple users.
In the past, I had placed the iTunes folder in /Users/Shared, and created an alias to it in the "Music" folder of each user, and it worked fine. However, with a recent upgrade to Mac OS 10.5, only the Home user account can access the library.
I read the Apple Support Document http://support.apple.com/kb/ht1203 uner Mac OS X which specifically states *not* to move the iTunes folder, just the iTunes Media folder (which I don't have, would that be iTunes Music?).
Any recommendations? Should I delete the different alias, move the iTunes folder back to the home user, and then follow the instructions in the support document?
We're also looking to sync music purchsed on our iPod touches, as well as apps (which weren't supported in our privous Mac OS X version.
Any advice is appreiciated.

David Guay wrote:
... iTunes Media folder (which I don't have, would that be iTunes Music?).
yes.
specifically states *not* to move the iTunes folder
*do* keep the entire iTunes folder in /users/shared, however, instead of creating aliases, launch iTunes while holding the option (⌥) key, click choose library when prompted, and select the iTunes folder in /users/shared.
obviously, only one iTunes at a time can access the library !

Using home sharing, can you sync libraries between multiple users in a household?

Using home sharing, can you sync libraries between multiple users in a household?

Hey lindsay146,
Home Sharing lets you to stream or transfer music, movies, and more with up to five authorized computers in your household. You can learn more about it in this link:
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Welcome to Apple Support Communities!
All the best,
Delgadoh

Decision between multiple alternatives

Similar Messages

Maybe you are looking for