Number of audio tracks

Hi everyone.
I'm using Core Audio Mac Os X with and apogee mini me. I've changed the number of audio tracks from 40 to 50 in my audio configuration window but when I try to create a new track after no. 40 by SHift Ctrl Return as normal: No New Track! SImilarly, in the scroll down list of possible tracks only forty are specified, not fifty as I have told the configuration panel I need. Does anyone have an idea how I can get more tracks, I need 'em right now!
Thanks in advance.
Ben.

Thanks a bunch, guys: That works!
If you've got a moment can you tell me one more thing...
Now I've got these new tracks, how can I make them come in between track 40 and Audio Instrument No.1 in my mixer...Right now, I've put them under tracks 1 - 10 ....
It's just a layout thing, but if you had a moment I'd appreciate it.
Thanks again!

Similar Messages

  • Number of audio tracks possible? in logic

    im trying to determine the number of possible audio tracks in logic....in my pulldown menue, there are only 24 possible...i imagine i can set this to a higher number?? any suggestions?
    thanks

    I think what you are looking for is in the Arrange window, Track->Create Multiple->Track Type: Audio. This should allow you to access the unlisted tracks from the Arrange view. Just add however many you need.

  • How do I control the number of audio tracks in an exported QT movie?

    I am at a loss. I have 59.94 fps DVCProHD files that I want to trim and to export in the same format. The original clips have two tracks of audio, but the exported tracks have eight tracks of audio. I normally use an 8-track audio card, but nothing I do seems to prevent the 8-track export: I have selected "stereo downmix" in the audio mixer tool and set the audio playback device to "Built-in Audio," to no avail. I want the exported files to have the same two audio tracks as the original, not two plus an empty six. There seem to be no controls that allow me to specify this. Can anyone explain to me what is going on and how to change it?
    Thanks.
    I am using FCP 5.0.4
    G5 Dual2.7GHz   Mac OS X (10.4.5)  

    Hello Robert,
    It might be that your sequence is set to output 8 channels. try this...
    Go to Sequence>Setting> and go to the 'Audio Outputs' tab. Here, change the 'Outputs' to 2.
    You might also want to check the track-assign buttons on the timeline, ctrl+click on the auto assign square (just to the right of the little padlocks) and go to the Audio Outputs. Check that each track is assigned to 1&2.
    J

  • Audio Tracks Mulitplying Like Rabbits...

    Whenever I import a stereo track of audio, and then drag it to the audio tracks, it wants to insert that audio over the number of audio tracks available. So, if it's eight tracks, suddenly eight (rather) than two copies of this audio file are inserted. What's happening here?

    Hi, thanks for replying. The source of the audio is an .aif file I imported—a :05 sound effect.
    I have two audio tracks selected as destination tracks. There are eight tracks in total. When I drag the stereo file to the two destination tracks, all eight tracks get the stereo file. Now, if I try to do this again, the existing eight tracks will double to make sixteen! (That's how I ended up with eight in the first place, placing the stereo track a couple times...)
    What's goin' on?

  • Macbook Pro C2D HD 5400rpm. How many audio tracks?

    I'm looking to move from my Ti 1Ghz G4 to a newer Macbook Pro C2D, and i've a question about using the internal HD on the MBP.
    On my old TiBook, ive popped in a 100GB 7200rpm drive, and from this i've been able to acheive around 44 to 46 stereo tracks (playback only) before i get "disk too slow errors" (the drive had around 55GB used)
    Does anyone know the max number of audio tracks that can be streamed off an internal 160GB 5400rpm in a MBP C2D?
    Anyone able to run a quick test for me please?
    Powerbook Ti 1Ghz   Mac OS X (10.4.8)   1GB ram, 100GB 7200rpm HD

    whoa he came down hard on you there...
    ok i have a macbook, not pro, didn't need the little extra u get more for a lot more money if you buy pro, not worth it to me... i run my sessions on the internal 5400rpm. keep everything in the lappy, samples and all, have her juiced up 2g's of ram and let me tell ya i haven't had any speed issues at all. i have all of logics performance tweaks set to blazing (128, live playback only) and it's comparable to my G5 tower. These Intel chips are no joke. If you have room in your go bag for the external HD take it with you cuz it'll even run sweeter. i'm seriously thinking of getting rid of the old tower and getting another lappy, but no i'll prob just get another macbook, for a grand it ain't bad at all, throw in the apple care, max out the ram and presto you've got all your gonna need from a computer-any application

  • How do you "UNLINK" the audio tracks?

    I have had LOGIC now for about 3 weeks. I am learning tons and enjoying the program overall. I have received some great help from this forum. My latest adventure is creating more audio tracks. I found out recently from this forum that I had the settings in my LOGIC setup. I increased the number of audio tracks that I can use. My current question is, If I need more audio tracks in a project, I click on an audio track and then go to the Track>Create Multiple Tracks menu. I can import as many as I need.
    The problem I am having is, when I create the tracks, they are somehow "linked" to whatever track that I clicked on when I choose to create the new tracks. I have tried changing the track and midi channels in the LH side of the arrange window, but when I change one track, the other one changes also. I don't know how to separate them. Is there some way to do that? ALSO>>>> Is there a way to create new audio tracks without having to click on an existing track first?
    Thank you for your consideration.

    The fastest way I know is to 1)- open the track mixer window, 2) click on the global button - to turn it on, 3) click on track button - to show all available tracks, 4) double click on an unused track, this will put a new track into the arrange window.
    Turning off the global button in the mixer window and selecting the parts you want to display (Track, Instruments, MIDI, auxs, busses, etc) will show you the active tracks you have in the arrange window.
    Regards
    BB

  • Adding More Than 16 aUdio Tracks.

    How do I add more than 16 Audio Tracks when my computer says there are no more audio tracks available?

    " I set the max number of audio tracks to 35 and I am still notable to add more audio tracks."
    Did you then re-launch the audio driver by deselecting it and then re-selecting it? It does not take effect until you do.

  • Languages on audio tracks

    Hi, I am working on a project with 11 different languages.
    I have named the audio tracks with the languages names, i.e. Track 1 is Englis, Track 2 is French
    however, when i get to these three languages
    Bosnian
    Sylheti
    Mandarin
    I can't find them in the list, and when i choose the -- option, on the remote control it shows at English 2, can anyone help me with this issue please?
    Thank you very much,
    Mariana

    Welcome to the forum.
    Somewhere in the recesses of my feeble memory, it seems that there is a limit to the number of Audio Tracks. If I am wrong, then someone will quickly correct me on this. My guess would be that you have exceeded that limit. I'll poke around and see if I can confirm a limit and will post my findings, if Jbowden, Jeff, or others do not step in to correct this old guy.
    Good luck,
    Hunt

  • How to add more audio tracks to my environment ? i forgot !!

    Hi. I dont see this in the Logic Ref guide.
    In my previous autoload (made through the initial setup assistant) , i had selected 24 audio tracks. My current project requires more tracks , how can i add more tracks to the environment in this project.
    I havent done this in so long , i forgot.
    In the Environment , i choose AUDIO layer , then New Audio Object , i'm lost from here on.....
    Please help. I'll try and find this in the manual aswell.
    Thanks a lot
    Faisal

    Hi
    If you want to do it the easy way:
    Go to the arrange page, go to the smaller menu labelled 'Track' and select 'create multiple' then choose what you want (mono, stereo or audio instrument). Voila.
    This will add the extra tracks to your environment too. If it doesn't happen then check your audio preferences for max number of audio tracks and adjust accordingly.
    Del

  • Creating more than 16 Audio Tracks

    I am working on a project that needs more than 16 Audio Tracks. Then I click on the track, then go to Audio Tracks, there is only 16 available, and they are all being used. I went into Preferences --> Audio --> Drivers, and boosted the Max. Number of Audio Tracks up, but there is still only 16, and my 16, I mean 16 different Channels. I know there has to be a way to do this. I have gotten more the 16 using Garage Band. Thanks in advance.

    ChicleB76 wrote:
    I am working on a project that needs more than 16 Audio Tracks. Then I click on the track, then go to Audio Tracks, there is only 16 available, and they are all being used. I went into Preferences --> Audio --> Drivers, and boosted the Max. Number of Audio Tracks up, but there is still only 16, and my 16, I mean 16 different Channels. I know there has to be a way to do this. I have gotten more the 16 using Garage Band. Thanks in advance.
    You need to learn to use the Environment.
    In the Environment there is an audio objects page, and there it is where you have to manually create the new 17+ audio tracks you need.
    Now, go crack open the manual, and go to the Environment chapter... it will enlighten you.
    Cheers

  • How to split audio tracks into left and right channels as we do in FCP or Avid needed for dubbing?

    We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Pl help. Since we need to maintian the split track to dubb into other languages.

    You need to do this before adding the footage to the sequence:
    Select the clip (or multiple clips) in the bin
    Menu > Clip > Modify > Audio Channels (Shift G)
    Change 'Number of Audio Tracks' to 2
    Change 'Channel Format' to Mono
    Dismiss the info message.
    When you place the clip in a sequence it will now drop L and R into separate tracks (assuming your sequence allows that audio model).

  • Multiple audio track editing problem

    Hello, Im editing a film right now and we have a tons of temp music score tracks along with the standard vocal track from the camera. I am running into major problems, because when I go to trim a clip a little, it says operation not allowed because a piece of audio temp music is below it. I have to lock the the audio (say its 7&8) to make the trim, but then all the music on that track doesnt get shifted down. How the **** I am supposed to edit with multiple tracks. Is it just not possible? Please say no.

    Sequence settings, Source material specs, number of audio tracks, please.

  • FCP 4.5 Sequence w/ No Audio Tracks

    How can I create a sequence with no audio tracks? When I try to delete the audio tracks, I get an error message saying "Deleting all tracks is not permited."
    Any help? Thanks

    I'm getting the feeling that people are confused with what my goal is. In the timeline window, I want there to be NO audio tracks.< </div>
    I understand. You're not grasping the answer.
    How can I create a sequence with no audio tracks? When I try to delete the audio tracks, I get an error message saying "Deleting all tracks is not permited."< </div>
    Instead of saying A1, A2, etc, there would be NOTHING. < </div>
    You can't. Period. You can reduce the number of audio tracks to one but no fewer. You can create a preset, a default empty sequence, to open with only one audio track. But you cannot delete all audio tracks. Can't be done.
    bogiesan

  • Urgent - and probably easy - audio tracks appear without faders

    in my logic pro song i have 20+ instrument tracks, most with exs24's on them.
    i also have 20+ audio tracks, but only the first 4 display with faders, 5-20+ display without faders, without plugins, and have no output
    is there a way to get a fader, and output on these audio tracks?
    please help, a client is coming over today!!
    MacBook Pro   Mac OS X (10.4.8)   2Ghz Duo Core 2 / 2GB Ram / Logic Pro 7.2

    Ashermusic SAID -- " In your Audio Hardware and
    Dirvers panel what is the maximum number of audio
    tracks you have it set to? "
    So I set it to 40, unchecked core audio and rechecked
    it, and badda BING, its all good, nice one
    ashermusic!!! thankyou
    You're very welcome.

  • How do i get itunes to play in 5.1 on windows, 5.1 works on everything else on my comp, blueray,dvd,games... just not itunes. even though the things i am trying to play have a 5.1 audio track.

    on the files that have multiple audio tracks the option to switch pops up but i am unable to select it.
    i've tried talking to an apple tech at an apple store, independent tech at mac dealer, i have spent countless hours surfing forums, and even managed to talk to some condicending jerk at an apple customer service number"just because you spent a lot of money converting you're media to itunes doesn't mean you get support" i was told "  aslo while in itunes looking at where the option to go 5.1 is i was told" there is nowhere in itunes to set that setting" i'll mention again i had itunes in fullscreen and was looking at the damm option while he said that.
    feeling really ripped off here bought system for media and would have been better off buying dvds
    spent about 3 hours last night surfing forums, took a few hours to find a number at apple where i could talk to a real person just to be brushed off.

    i just tried disabling adblock and checking if i had any no script or noscript sort of addon. i do not have a script killer. disabling adblock did not solve the issue.

Maybe you are looking for