Default ALV format for MB5T Report

Dear Experts ,
I want to have a defalut selection of ALV format for MB5T report .
How can I do this .
Regards
Anis

Hi Chakrapani ,
Please suggest if there is any other way to tackle it without the intervention of ABAPer .
Regards
Anis

Similar Messages

  • How to set the default print format for the report

    Hi,
    In ALV report , i want to defalut specific print format and printer for background processing .
    Any clues!!!!!!!!!
    Regards
    Swatantra

    Hi
    Please check below code:
    DATA: PRIPAR TYPE PRI_PARAMS,
          ARCPAR TYPE ARC_PARAMS,
          LAY    TYPE PRI_PARAMS-PAART,
          LINES  TYPE PRI_PARAMS-LINCT,
          ROWS   TYPE PRI_PARAMS-LINSZ.
    DATA: val(1).
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        destination            = 'LOCL'   " <--- Printer Name
        no_dialog              = 'X'
        immediately            = ' '
      IMPORTING
        out_archive_parameters = arcpar
        out_parameters         = pripar
        valid                  = val
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc <> 0.
    *     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *** Specifying the page formats
        pripar-linct = 65.
        pripar-linsz = 190.
        pripar-paart = 'X_65_132'.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        in_archive_parameters  = arcpar
        in_parameters          = pripar
        no_dialog              = 'X'
    *      list_name              = 'Testing Purpose Only' "l_list
      IMPORTING
        out_archive_parameters = arcpar
        out_parameters         = pripar
        valid                  = val
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc EQ 0.
      NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS pripar
      ARCHIVE PARAMETERS arcpar
      NO DIALOG.
    ELSE.
      write:/ 'Unable to create spool'.
    ENDIF.
    So now a spool is created with the required print parameters...
    The list that is created from here will be in the spool.
    Once the list is completed, close it with NEW-PAGE PRINT OFF.
    Hope this helps.
    Regards
    Eswar

  • How do I change the default file format for saving files in Preview

    I often take screen clips and save them as files to my desktop, then upload them to my website or include them in emails. The default file format for Preview seems to be TIFF, but I'd prefer jpg. How do I convince Preview to use jpg as the default file format?
    TIA,
    Thad

    I should have been a little clearer...
    If I'm emailing a screen-clip, I can just paste it right into the email, but I post on a lot of discussion boards and it's often nice to be able to include a screen shot in those. My preferred way to do that is to post the clip at my personal website and then put a link in the post. It gives me the ability to delete the image whenever I want (a plus for any security freak) and it works on every discussion board I know. Some boards allow attachments, some don't. Plus I don't want to have to remember different d/b file attachment procedures. Anyway, when I make a screen-clip, I need to temporarily save it (usually to my desktop), then ftp it to my website. I use Preview to do that. It's simple. But I'd like it to default to .jpg instead of .png or .tiff. (FWIW, I just tried it and the default was .png, but I swear I did something similar earlier that defaulted to .tiff when I first tried to save the newly-created file).

  • What is the default file format for saving in MS Office 2013? Is it still the transitional OOXML or the ISO/IEC 29500 strict format?

    As I have read, MS Office 2013 is able to read and write the ISO/IEC 29500 strict (standardized Office Open XML) file format. MS Office 2010 was only able to read the strict format and MS Office 2007 could neither read nor write the strict format. The
    .docx, .xlsx and .pptx saved by Office 2007 and 2010 were only complying to the OOXML transitional, as far as I understood.
    My main question is what the default file format for saving in MS Office 2013 actually is? Is it still the transitional OOXML or the ISO/IEC 29500 strict format?
    In case, MS Office still saves in the transitional standard by default, is it possible to set the strict standard in the settings? Is this recommended (I assume that OOXML strict is the future) to do this?
    Thanks.

    Yes, the Transitional is still the default file format for saving in Office 2013, and we can modify this setting in Word Options, Save:
    As Alex Brown covers in his
    blog post, "Transitional is intended to preserve the fidelity of existing binary documents being migrated to ISO/IEC 29500, and includes many legacy features for compatibility with existing documents. Strict is a subset of Transitional that does not
    include legacy features – this makes it theoretically easier for a new implementer to support (since it has a smaller technical footprint, so to speak), but also makes it less able to preserve the fidelity of existing documents."
    Max Meng
    TechNet Community Support

  • [svn] 3148: You can now use CSS styles to set the default text format for TextView.

    Revision: 3148
    Author: [email protected]
    Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
    Log Message:
    You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
    SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
    Reviewer: Glenn
    Bugs: -
    QA: Lots of new stuff to test!
    Doc: No
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

    Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
    Thanks for taking a look though!
    Shaun

  • How can I set the default save format for photoshop edited photos?

    I just spotted that some of my photos that I've edited in Photoshop from Lightroom are a whopping 450MB. Looking deeper I found that they are saved as uncompressed TIFF files, this despite the default save format for Photoshop in Lightroom's preferences being set to ZIP compressed TIFF files. So why doesn't this setting work and how can I make Photoshop save things compressed?

    Sounds funny but first tell us what version of PS you have, what version of Lr and which OS. Thanks.

  • Default Disk Format for HDD in Time Capsule (5th Generation)

    Anyone happen to know the default disk format for the HDD in the new Time Capsule? It seems like it arrives preformatted in FAT with Time Machine backups being saved into sparsebundles containing HFS+ case-sensitive volumes.
    Can anyone else confirm this?

    Anyone happen to know the default disk format for the HDD in the new Time Capsule?
    All Time Capsules are formatted in Mac OS Extended (Journaled), also known as HFS+.
    It seems like it arrives preformatted in FAT
    See answer above.
    with Time Machine backups being saved into sparsebundles
    Correct

  • How to set default number format for whole app

    Hi!
    I have a bunch of View Objects and I have to set the format for each attribute of type number. I've tried using
    MyAtt_FMT_FORMAT=#,##0.00
    MaAtt_FMT_FORMATTER=oracle.jbo.format.DefaultNumberFormatter
    on just a couple of attributes and it works OK. But since I have a lot of number fields across application in a lots of view objects, I would like to set this format as default for all the number fields in my application.
    Can I do that and if yes, how?
    Thanks

    you can use Domains.
    chapter 26 Advanced Entity Object Techniques in Developer’s Guide For Forms/4GL Developers
    Regards,

  • How to use different default parameter value for different report subscriptions

    In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
    Report name – Testsubscription.rdl
    Subscription-1
    Input parameter (default values):
    start_date = first day of current Month
    end_date = till date
    Subscription-2
    Input parameter (default values):
    start_date = first day of current Quarter
    end_date = till date
    I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
    Thanks!
    spp

    Hi sppdba,
    As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
    goal by using a single report definition file.
    Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
      1. In design surface, right click start_date and open Parameter Properties dialog box.
      2. In General pane, type Name and Prompt, set Data Type to Date/Time.
      3. Click Available Values in left pane, select Specify Values.
      4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
    =DateSerial(Year(Now()), Month(Now()), 1)
      5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
    =DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
      6. Right click end_date and open Parameter Properties dialog box.
      7. In Available Values pane, select Specify Values.
      8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
    Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
      1. Open Report Manager, and locate the report for which you want to create a new subscription.
      2. Hover over the report, and click the drop-down arrow.
      3. In the drop-down menu, click Manage. This opens the General properties page for the report.
      4. Select the Subscriptions tab, and then click New Subscription.
      5. Select the delivery extension and data source for the subscription.
      6. Select a method of delivery, then choose report delivery options.
      7. Specify conditions that cause the subscription to process and delivery to occur.
      8. Set start_date to First day of Current Month, end_date to Today, then click OK.
      9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
    The following screenshots are for your reference:
    For detail information about Creating Standard Subscriptions, please refer to the following document:
    http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.

  • Is ALV possible for this report layout?

    Hi,
    I'd like to know if I can create this layout in ALV (layout as seen below):
    ......................|..........Column Header1............|.......Column Header2..........|  ...
    ......................|.Col Header3..|..Col Header4.....|..Col Header5.|.Col Header6.| ...
    Row header1...|.....data..........|......data............|.......data........|......data.......| ...
    Row header2...|.....data..........|......data............|.......data........|......data.......| ...
    Row header3...|.....data..........|......data............|.......data........|......data.......| ...
    If this is possible, can you give me an idea how can this be done?
    Thank you so much for taking time to read my post.
    Best regards,
    Jen
    Message was edited by:
            Jen Abap

    i will suggest you to go for classical report because it will be more easier ... but in alv list display you can achieve this kind of thing... just check this prog whether it suits you or not....
    type-pools : slis.
    tables : mara,marc,mard,makt.
    data : begin of imara occurs 0,
           matnr like mara-matnr,
           mtart like mara-mtart,
           end of imara.
    data : begin of imarc occurs 0,
           matnr like mara-matnr,
           werks like marc-werks,
           end of imarc.
    data : begin of imard occurs 0,
            matnr like mara-matnr,
            lgort like mard-lgort,
           end of imard.
    data : begin of imakt occurs 0,
           matnr like mara-matnr,
           maktx like makt-maktx,
           end of imakt.
    data : begin of itab  occurs 0,
           rowheading(16),
           matnr like mara-matnr,
           mtart like mara-mtart,
           werks like marc-werks,
           lgort like mard-lgort,
           maktx like makt-maktx,
           end of itab.
    data : ifieldcat type slis_t_fieldcat_alv,
           wfieldcat type slis_fieldcat_alv,
           ilayout type slis_layout_alv,
           IEVENT    TYPE SLIS_T_EVENT,
           WEVENT    TYPE SLIS_ALV_EVENT.
    data : tabix(3).
    select-options : s_matnr for mara-matnr obligatory.
    start-of-selection.
    perform get_data.
    perform build_finaltab.
    perform build_fieldcat.
    perform build_layout.
    perform build_eventtab.
    perform displaydata.
    *&      Form  get_data
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM get_data .
    select matnr mtart into table imara from mara where matnr in s_matnr.
    if not imara[] is initial.
    select matnr werks from marc into table imarc for all entries in imara
                                       where matnr = imara-matnr.
    select matnr lgort from mard into table imard for all entries in imara
                                       where matnr = imara-matnr.
    select matnr maktx from makt into table imakt for all entries in imara
                                       where matnr = imara-matnr.
    endif.
    ENDFORM.                    " get_data
    *&      Form  build_finaltab
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_finaltab .
    loop at imara.
    tabix = sy-tabix.
    move-corresponding imara to itab.
    read table imarc with key matnr = imara-matnr.
    itab-werks = imarc-werks.
    read table imard with key matnr = imara-matnr.
    itab-lgort = imard-lgort.
    read table imakt with key matnr = imara-matnr.
    itab-maktx = imakt-maktx.
    concatenate 'Row no' tabix into itab-rowheading separated by space.
    append itab.
    endloop.
    ENDFORM.                    " build_finaltab
    *&      Form  build_fieldcat
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_fieldcat .
    wfieldcat-fieldname = 'ROWHEADING'.
    wfieldcat-col_pos = 1.
    wfieldcat-outputlen = 15.
    wfieldcat-seltext_l = ''.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'MATNR'.
    wfieldcat-col_pos = 2.
    wfieldcat-outputlen = 18.
    wfieldcat-seltext_l = 'Material no'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'MTART'.
    wfieldcat-col_pos = 3.
    wfieldcat-outputlen = 10.
    wfieldcat-seltext_l = 'Mat gr'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'WERKS'.
    wfieldcat-col_pos = 4.
    wfieldcat-outputlen = 10.
    wfieldcat-seltext_l = 'Plant'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'LGORT'.
    wfieldcat-col_pos = 5.
    wfieldcat-outputlen = 10.
    wfieldcat-seltext_l = 'Stor loc'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    wfieldcat-fieldname = 'MAKTX'.
    wfieldcat-col_pos = 6.
    wfieldcat-outputlen = 30.
    wfieldcat-seltext_l = 'Material desc'.
    append wfieldcat to ifieldcat.
    clear wfieldcat.
    ENDFORM.                    " build_fieldcat
    *&      Form  build_layout
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_layout .
    ilayout-no_colhead = 'X'.
    ENDFORM.                    " build_layout
    *&      Form  build_eventtab
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_eventtab .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = IEVENT
    *   EXCEPTIONS
    *     LIST_TYPE_WRONG       = 1
    *     OTHERS                = 2
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE IEVENT INTO WEVENT WITH KEY NAME = 'TOP_OF_PAGE'.
      IF SY-SUBRC = 0.
        WEVENT-FORM = 'TOPOFPAGE'.
        MODIFY IEVENT FROM WEVENT INDEX SY-TABIX.
      ENDIF.
    ENDFORM.                    " build_eventtab
    *&      Form  displaydata
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM displaydata .
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
       I_CALLBACK_PROGRAM             = sy-repid
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   I_STRUCTURE_NAME               =
       IS_LAYOUT                      = ilayout
       IT_FIELDCAT                    = ifieldcat
    *   IT_EXCLUDING                   =
    *   IT_SPECIAL_GROUPS              =
    *   IT_SORT                        =
    *   IT_FILTER                      =
    *   IS_SEL_HIDE                    =
    *   I_DEFAULT                      = 'X'
    *   I_SAVE                         = ' '
    *   IS_VARIANT                     =
       IT_EVENTS                      = ievent
    *   IT_EVENT_EXIT                  =
    *   IS_PRINT                       =
    *   IS_REPREP_ID                   =
    *   I_SCREEN_START_COLUMN          = 0
    *   I_SCREEN_START_LINE            = 0
    *   I_SCREEN_END_COLUMN            = 0
    *   I_SCREEN_END_LINE              = 0
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER        =
    *   ES_EXIT_CAUSED_BY_USER         =
      TABLES
        T_OUTTAB                       = itab
    * EXCEPTIONS
    *   PROGRAM_ERROR                  = 1
    *   OTHERS                         = 2
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " displaydata
    form topofpage.
    write : / sy-uline.
    write : /17 sy-vline,28 'Contents from MARA',47 sy-vline,
             50 'plant & strg loc',69 sy-vline, 78 'Matrl desc'.
    write : / sy-uline.
    write : /17 sy-vline,22 'Material no',36 sy-vline, 39 'Mat gr',47 sy-vline, 48 'Plant',58 sy-vline,
            60 'strg loc',69 sy-vline.
    endform.
    this is a test prog just change as per your requirement.
    regards
    shiba dutta

  • ALV output for Purchase reports

    Hi Friends,
    How can I have ALV output for my Purchase reports like ME2L, ME2N, ME2M. My scope of Lists do not have ALV output as yet. How do we configure it..?
    Thanks in advance.
    Sarvesh

    which ECC version are you working on? I think versions below 4.7 didnt have ALV (im not sure though)
    Try this  path :
    SPRO->Materials mgmt->purchasing->Reportng->Maintain Purchasing lists->Scope of lists->Define scope of list.
    check if ALV is maintained here.  if not , create ZALV by Copying from ALLES or make your own new one ZALV  , and inside ZALV  , make sure to Tick the  "Use ALV grid Control"  in the last  tab "settings for ALV  grid control"

  • ME2J CNB2 will not do ALV format for Projects

    Please help...Our users want to look at all PO's for a range of Projects & in ALV format.  The ALV format works for the Reqs and for ME2L, ME2K and ME2M but everytime we try it for ME2J and CNB2 (which both use program RM06EKPS) it won't work.  We are on 4.7.
    Thks

    I don't know if our projects are setup differently but that didn't show us anything.  Unfortunately, we create our req's & po's through me21n & me51n and tie them to the network but we don't do it through PS so maybe that's the problem.
    Any idea why we can't get the ALV to work for ME2J?

  • How to set default export format in Crystal Reports Viewer

    When Viewing Crystal Reports, the top left button can choose export file format, how to set it default to Excel?
    If we can only go with hidden the button, and create a new button, any one can kindly provide how to?
    The BOE version is XI R2 SP2.
    Thanks in advance!
    Jennie

    hi all , i have same problem like i want only 1 report to be generated like for ex:only PDF should be generated n all others has to be disabled. my jsp is as follows:
    <%@page import="com.abc.def.crystalReports.JRCHelper,
    com.crystaldecisions.reports.reportengineinterface.*,
    com.crystaldecisions.report.web.viewer.CrystalReportPartsViewer,
    com.crystaldecisions.report.web.viewer.CrystalReportViewer,
    com.crystaldecisions.reports.sdk.ReportClientDocument,
    com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
    com.crystaldecisions.sdk.occa.report.reportsource.IReportSource,
    com.crystaldecisions.report.web.viewer.*,
    com.crystaldecisions.sdk.occa.report.exportoptions.*,
    java.sql.Connection,
    java.sql.DriverManager,
    java.sql.ResultSet,
    java.sql.SQLException,
    java.sql.Statement,
    java.util.ResourceBundle"%><%
         // This sample code calls methods from the JRCHelperSample class, which
         // contains examples of how to use the BusinessObjects APIs. You are free to
         // modify and distribute the source code contained in the JRCHelperSample class.
         try {
              ResourceBundle messageBundle = ResourceBundle.getBundle("resources.ApplicationResources");
              String reportName = messageBundle.getString("report.path");
              ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
              if (clientDoc == null) {
                   // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
                   // tag can be removed to open the reports as Java resources or using an absolute path
                   // (absolute path not recommended for Web applications).
                   clientDoc = new ReportClientDocument();
                   // Open report
                   clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
                   // ****** BEGIN CHANGE DATASOURCE SNIPPET **************** 
                        String connectString = "jdbc:oracle:thin:@****:db;
                        String driverName = "oracle.jdbc.driver.OracleDriver";
                        String JNDIName = "";
                        String userName = "root";               // TODO: Fill in database user
                        String password = "root";          // TODO: Fill in password
                        // Switch all tables on the main report and sub reports
                        JRCHelper.changeDataSource(clientDoc, userName, password, connectString, driverName, JNDIName);
                   // ****** END CHANGE DATASOURCE SNIPPET ****************      
                   // Store the report document in session
                   session.setAttribute(reportName, clientDoc);
                   // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** 
                        // Create the CrystalReportViewer object
                        CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
                        ReportExportControl exporter = new ReportExportControl();
                        //     set the reportsource property of the viewer
                        JPEReportSourceFactory rptSrcFactory = new JPEReportSourceFactory();
                        IReportSource reportSource = (IReportSource)rptSrcFactory.createReportSource(reportName,request.getLocale());
                        Boolean b1 = new Boolean(messageBundle.getString("Toggle.Group.TreeButton"));
                        Boolean b2 = new Boolean(messageBundle.getString("Has.ExportButton"));
                        Boolean b3 = new Boolean(messageBundle.getString("Has.SearchButton"));
                        Boolean b4 = new Boolean(messageBundle.getString("Display.GroupTree"));
                        Boolean b5 = new Boolean(messageBundle.getString("Has.Logo"));
                        Boolean b6 = new Boolean(messageBundle.getString("Display.Toolbar"));
                        crystalReportPageViewer.setHasToggleGroupTreeButton(true);
                        crystalReportPageViewer.setHasExportButton(true);
                        crystalReportPageViewer.setHasSearchButton(false);
                        crystalReportPageViewer.setDisplayGroupTree(false);
                        crystalReportPageViewer.setHasLogo(false);
                        crystalReportPageViewer.setOwnPage(true);
                        crystalReportPageViewer.setOwnForm(true);
                        crystalReportPageViewer.setReportSource(reportSource);
                        crystalReportPageViewer.processHttpRequest(request, response, application, null);
                        IReportSource reportSource = (IReportSource)rptSrcFactory.createReportSource(reportName,request.getLocale());
                        //CharacterSeparatedValuesExportFormatOptions csvOptions = new CharacterSeparatedValuesExportFormatOptions();
                        ExportOptions exportOptions = new ExportOptions();
                        //exportOptions.setExportFormatType(ReportExportFormat.characterSeparatedValues);
                        //exportOptions.setExportFormatType(ReportExportFormat.PDF);     
                        exportOptions.setExportFormatType(ReportExportFormat.characterSeparatedValues);
                        exporter.setReportSource(reportSource);
                        exporter.setExportOptions(exportOptions);
                   //exporter.setExportAsAttachment(true);
                        exporter.processHttpRequest(request, response, application, null);
                   // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************          
         } catch (ReportSDKExceptionBase e) {
             out.println(e);
    %>
    if i want to add custom button where to add

  • Chinese Character in PDF format for Oracle Reports 11g

    Hello Everyone,
    Currently we have a Report that need to be display chinese character in PDF format.
    We followed the steps specified in the "Oralce Fusion Middleware Publishing Reports to the Web with Oracle Reports Services"
    documentation but things doesn't work. We also installed Adobe Acrobat Reader 9 and Asian Font Pack 9 on the server side
    and even on the client/user/development side and followed the steps in the documentation, but no effect at all. Or we even
    tried "Arial Unicode MS", same thing no effect.
    For sure, we may miss something during PDF aliasing or PDF subsetting setup.
    Anyone out there who has the same experience and able to resolve the issue that currently using the Oralce Fusion Middleware Reports 11g?
    Doesn't matter if it does not related to chinese character, as long as it relates to this issue like japanese or arabic characters in PDF.
    If its ok, kindly provide the steps how you do it.
    Your help is highly appreciated.
    Regards and Thank you very much!

    I am now facing exactly the same problem as user449955 (Eric's). Dear Eric, how about your situation? If you have resolved this problem, may I ask for your solution?
    In my case, using either font aliasing or font subsetting doesn't work at all (displaying "garbage" characters instead of Chinese characters). The setting in my uifont.ali is as follows:
    If using font aliasing:
    [PDF]
    .....ZHT16HKSCS = "MSungStd-Light-Acro"
    If using font subsetting (the REPORTS_PATH already includes "C:\Windows\Fonts"):
    [PDF:Subset]
    "Courier New" = "mingliu.ttc,2"
    For both cases, the report server's NLS_LANG already set to "TRADITIONAL CHINESE_HONG KONG.ZHT16HKSCS" (I am in fact located at Hong Kong). For font aliasing, the client side already has Asian Adobe Reader with Asian font pack installed.
    By the way, I noticed that the WebLogic EM is configuring/updating the uifont.ali file at "<instance home>\config\FRComponent\frcommon\tools\common" directory, but the Oracle Reports 11g's documentation sometimes advise to refer to another uifont.ali file located at "<instance home>\config\FRComponent\frcommon\guicommon\tk\admin" directory. Which one of the uifont.ali files is the one used by the Oracle Reporting Service?
    My report server's platform is Windows 7 Enterprise (64-bit) and the Reports version is 11.1.1.3.
    Anyone can help to advise?
    Thank you very much.
    Regards

  • Date Format for BEx report

    Hi Gurus,
    I have a report which will return the Posting Date and Document date in the mm/dd/yyyy format. I need this to be displayed in dd/mm/yyyy format. I need this to be done in the BEx level since this report will be automatically generated and emailed to user.
    I promise will assign point for your kind answers.
    Thank you

    Hi Saravanan,
    You can change Date format in your system.
    Start->Settings->Control panal->Regional & language options-> Regional options->
    customize->Date
    Here change Date format from mm/dd/yyyy to dd/mm/yyyy
    Once u did it logoff from Bex and login again.

Maybe you are looking for