Default display or print methods

Hello All,
Is there a default method that is called to display a user defined type instance? For example, lets say there is a type myType. If I use the following SQL:
select myType from myTypeTable;
Is there a method that is called for myType to format it? In other words, does Oracle have an equivalent to Java's toString() method?

You can add a title to your worksheet and include the conditions used in the report.
Add title:
From edit worksheet view-> options button -> table tab: check Title.
To add conditions to printout of report...I think
from report view double click title -> text tab: click insert button - select conditions
CC

Similar Messages

Help reqd to display the FORM without Print method.

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Sankar,
Its bit ambigious......but logic is very simple...........
1. Create a Z.....report
2. Inside this create your selection parameters
3. Do your logic for the selection screen(use list box option or F4 help) to ask for the gate pass number.
4. Call the required form. (For print preveiw assign 'X' to tdpreview of ITCPO)
5. Finally assign your print program to the tcode which will finally do rest of the coding.
Thanks,
Mark

User default format in printing

Hi experts,
I have a question about the user default print format.
When I try to print out a output, the print format turn to be a format that I donu2019t want to use, I have to change the format manually everytime. Is there any method that I can set the user default print format for a specific output?
Thanks,
Nadali

The right way to change the default print format
1°) Display a printable data on the screen
2°) Click on the Print icon
3°) On the next screen, enter an Output device and click on the "Properties" button
4°) Double-click on the parameter value of the line "Format"
5°) In the field "Format" change the value of the print format and click on the "Specifications" button
6°) On the next screen click on the "Copy settings" button
That's it. Now the new value you enterred in 5°) is set as the default one for print format.
Note that following this procedure you can set or change other printing default parameters.

How can I set bind parameter as Default Display Value in JHeadstart

Hi,
I am using -
JDeveloper Studio Edition Version 10.1.3.1.0.3984
JHeadstart Release 10.1.3.1.26
Can anybody help me for the following:
I am using a super class of ViewObjectImpl where I am definning a bind parameter (Student ID) using login userid:
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
Then I defined p_std_id in Bind Variables tab in VO Editor and used that in Where clause in the SQL Statement tab.
This is working fine.
Now what I want to do is:
I want to put the value of p_std_id as Default Display Value for a field.
Can anybody let me know how I can put the value of p_std_id in JHeadstart Application Definition?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hi Jan and Steven,
Thanks for your reply.
I need to show the default value in the table layout.
Steven, could you please give some more hints about EL Expression?
To obtain the value of p_std_id now and pass it on as bind param, I am using a class extending ViewObjectImpl. Inside that class I am using the following method:
I'd appreciate if you could help for the EL Expression.
Thanks
protected void executeQueryForCollection(Object Object, Object[] bindParams,
int i) {
String userId = ((ApplicationModuleImpl)getApplicationModule()).getUserPrincipalName();
try{
getLdapInfo(userId);
catch(Exception e) {
sLog.debug("executeQueryForCollection: Userid = " + userId);
if (bindParams != null)
for (int j = 0; j < bindParams.length; j++)
Object[] bindParam = (Object[])bindParams[j];
if ("p_user_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_user_id, setting value to " + userId);
bindParam[1] = userId;
if ("p_emp_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_emp_id, setting value to " + employeeNumber_from_LDAP);
bindParam[1] = employeeNumber_from_LDAP;
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
super.executeQueryForCollection(Object, bindParams, i);
Thanks
Syed

Usage question about Default Display Value based on calculation

Hi,
I read on page 3-70 of the devguide about using EL for Default Display Values.
I want to something similar as the defaultSalaray based on some kind of calculation. There is stated to store the value on the request or session (request is fine for me).
I'm only wondering how I can put some infromation like this on the request using JHS.
Regards,
Marcel

Marcel,
This requires custom code in a JhsDataAction subclass. For example, you can overwrite method handleLifeCycle, and before calling super you can add a request attribute:
actionContext.getHttpServletRequest().setAttribute("defaultSal","23000");
Alternatively, if you have a business service method that calculates the default salary, you could create a separate DataAction, drag and drop this method on the data action, and add a success forward to your data page action. In the DataAction you can configure the method result location (requestScope, sessionScope). This way, you do not need to write java code.
Steven Davelaar,
JHeadstart Team.

I ordered a photobook, when I went to purchase it flashed up a warning about default text saying 'printed books will not include this text'. Really dissapointed, my photo book arrived with the default text printed. Will I have to return it?

I ordered a photobook, when I went to purchase it flashed up a warning about default text saying 'printed books will not include this text'.
Was really dissapointed when my photo book arrived with the default text printed. Will I have to return it? Or can I get some sort of discount? I don't live near a post office so I'd rather not have to return it.

Contact Apple support - they can answer that type of questions - we are just users here like yourself
BTW - it is best not to order when you have errors - to resolve that error place a single space in the subject text box
and always
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

HP Officejet Pro 8500A Plus stalls displaying "Now Printing".

Hi, in the office i work in we have 2 HP Officejet Pro 8500 A910 Series. One is networked to 3 PC's running WIndows 7 and the other is connected via wifi to a PC also running Windows 7.
The problem is the printer that is networked often stalls displaying "now printing" on the printer screen. The only way to continue printing is to turn the computer off and then on again, wait for it to do its cleaning etc then press print again. This is usually ok for that print job but as soon as further print jobs are added it has to be reset and the whole cycle repeats endlesly throughout the day. Until recently the other printer that is connected via wifi was working fine but now that is also doing exactly the same thing described above.
Recently i searched the forums and have discovered this is a common problem with this type of printer.
I have done partial and full resets of both printers to no avail.
Bothe printers are currently using firmware version: LRP1FN1126AR , which i believe is the latest firmware.
Please can someebody explain how to make these printers work properly? Many thanks
This question was solved.
View Solution.

ok, i have done the most research into this issue of all people, as i bought 3 of them for buisness.
the most common problem is the printer will only print for 20 or so mins after a reboot, then it goes to sleep,
if attempting print after this time, it will display "now printing" but nothing prints.
after hours to customer support, and a new printer delivered, plug in the expired/refilled genuine cartrige, same issue.
you can wake up the machine tempoarily by opening and closing the cartridge door.
i finally got the lady from HP to admit there is a page count on the chips, and instead of an error on screen,they do this to avoid law suits.she didnt admit to the last bit tho,lol.
i have 3 expired , refilled genuine chips now, all do the same all after around 5000 pages.
cheeky buggers!!
someone with time and money, please sue them , im tired of bieng ripped off.

Vendor Ref. no. not displayed in print preview in vendor aging report

Dear SAP team,
Vendor reference number is not displayed in print preview/print on vendor liabliteis aging report,
but this vendor reference number actually show in report,We are taking report by journal postings,
vendor reference entered in NumAtCard in AP invoice get copied to Ref2 in Journal Entry,then
why it is not showing in print preview/print.
Whether this is an application error / missing functionality ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 36.
Whether upgrade to latest patch 2005B PL46 will solve this issue ?
Jeyakanthan

Hello Jeyakanthan,
I would like to draw your attention to the enhancements we delivered within Aging Report in 2007 version and plan for 8.8 release.
The primary enhancement in 2007 version is reflecting new concept of Internal Reconciliation with more convenient backward reporting.
Within the 8.8 release ...
- when you generate the aging report you can group the report by customer or sales employee in the customer receivables aging report, and by vendor or buyer in the vendor liabilities aging report;
- when the aging report has been generated, you can view multicustomer/multivendor detailed information in the aging report window. There is no need to double-click each customer/vendor row to view the details.
We would strongly to recommend you to upgrade to 2007 version or join the ramp-up of 8.8 release soon.
Peter Dominik
B1 Solution Management

Printed front panel graphics quality (Print Panel to Printer method vs. Append Front Panel Image to Report.vi)

LV 6.02 (or 6.1)
NT 4.0
I have a vi that the front panel includes all the information I need to print except that it is on different pages of a tab control to conserve screen space. I was attempting to programatically cycle the value of the tab control in a For loop and invoke the Print Panel to Printer method to print 7 pages of the front panel, each with a different tab page selected. The printouts were excellent quality but beginning with the second consecutive Print Panel to Printer method the on screen front panel image of the VI being printed would become jumbled (sometimes, by the time 7 printings were done, the entire front panel image would disappe
ar and a bitmap of the desktop or underlying windows would be visible in the VI's panel frame) yet the subsequent Print Panel to Printer methods continued to print the panel as they should appear. The visible front panel graphics would never return to normal and the only solution was to close the vi (in the dev system) or exe (compiled) and re-launch. I tried a lot of things (like hiding the panel to print before printing and showing it after printing) with no luck. It appears that two or more of these consecutive invoke methods caused the problem regardless of whether the tabs were cycling, or even if there was no tab control and much fewer controls on the panel to be printed than normal. I also had the same problem with LV 6.1.
Finally, I was forced to switch to the report generation toolkit vi's, I cycle through the tab pages and use the Append Front Panel Image to Report.vi to append each image to the report. This is faster and control returns to my program quicker but I a
m unhappy with the printed quality of the graphics of the front panels. They are not as high of resolution as those generated via the Print Panel to Printer method.
Any suggestions?

You might try changing the way the VI is printed by going to tools >> options >> printing. Try the postscript and bitmap settings.
Jeremy

Mass display or print Purchase Order History

Instead of checking your Purchase Order History one at a time, you can now mass display or print them with this customized abap report.
Mass display or print Purchase Order History
You can request report by :
1. Change date
2. User Name
3. Purchase Order Number
4. Vendor Code
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com
REPORT ZPOCHANGE LINE-SIZE 132 NO STANDARD PAGE HEADING
                 LINE-COUNT 065(001)
                 MESSAGE-ID VR.
TABLES: DD04T,
        CDHDR,
        CDPOS,
        DD03L,
        DD41V,
        T685T,
        VBPA,
        TPART,
        KONVC,
        EKKO.
SELECT-OPTIONS: XUDATE FOR CDHDR-UDATE,
                XNAME FOR CDHDR-USERNAME,
                XEBELN FOR EKKO-EBELN,
                XLIFNR FOR EKKO-LIFNR.
SELECTION-SCREEN SKIP.
TEXT-001 - Sorting Sequence
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS: SUDATE RADIOBUTTON GROUP R1,
            SNAME RADIOBUTTON GROUP R1,
            SOBID RADIOBUTTON GROUP R1.
SELECTION-SCREEN END OF BLOCK BLK1.
DATA: WFLAG,
      WCHANGENR LIKE CDHDR-CHANGENR.
DATA: INDTEXT(60) TYPE C.
DATA: BEGIN OF ICDHDR OCCURS 50.
        INCLUDE STRUCTURE CDHDR.
DATA: END OF ICDHDR.
DATA: BEGIN OF ICDSHW OCCURS 50.
        INCLUDE STRUCTURE CDSHW.
DATA: END OF ICDSHW.
DATA: BEGIN OF EKKEY,
        EBELN LIKE EKET-EBELN,
        EBELP LIKE EKET-EBELP,
        ETENR LIKE EKET-ETENR,
      END OF EKKEY.
DATA: BEGIN OF ITAB OCCURS 50,
        BEGIN OF EKKEY,
          EBELN LIKE EKET-EBELN,
          EBELP LIKE EKET-EBELP,
          ETENR LIKE EKET-ETENR,
        END OF EKKEY,
        CHANGENR LIKE CDHDR-CHANGENR,
        UDATE    LIKE CDHDR-UDATE,
        UTIME    LIKE CDHDR-UTIME,
        USERNAME LIKE CDHDR-USERNAME,
        CHNGIND LIKE CDSHW-CHNGIND,
        FTEXT    LIKE CDSHW-FTEXT,
        OUTLEN   LIKE CDSHW-OUTLEN,
        F_OLD    LIKE CDSHW-F_OLD,
        F_NEW    LIKE CDSHW-F_NEW,
      END OF ITAB.
DATA: OLD_OBJECTID LIKE CDHDR-OBJECTID.
FIELD-SYMBOLS: <F_OLD>, <F_NEW>.
SELECT * FROM EKKO WHERE EBELN IN XEBELN AND
                         LIFNR IN XLIFNR.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID   = EKKO-EBELN.
PERFORM GETCHGDOCS.
ENDSELECT.
IF SUDATE = 'X'.
SORT ITAB BY UDATE EKKEY-EBELN CHANGENR EKKEY-EBELP
               EKKEY-ETENR.
ELSEIF SNAME = 'X'.
SORT ITAB BY USERNAME EKKEY-EBELN CHANGENR EKKEY-EBELP
               EKKEY-ETENR.
ELSE.
SORT ITAB BY EKKEY-EBELN CHANGENR EKKEY-EBELP EKKEY-ETENR.
ENDIF.
LOOP AT ITAB.
CLEAR: INDTEXT, EKKEY.
CASE ITAB-CHNGIND.
    WHEN 'U'.
        INDTEXT(50) = ITAB-FTEXT.
        INDTEXT+51 = TEXT-020.
        CONDENSE INDTEXT.
    WHEN 'D'.
        INDTEXT = TEXT-021.
    WHEN 'E'.
        INDTEXT(5) = ITAB-FTEXT.
        INDTEXT+51 = TEXT-021.
        CONDENSE INDTEXT.
      WHEN 'I'.
        INDTEXT = TEXT-022.
    ENDCASE.
    RESERVE 4 LINES.
    IF WCHANGENR NE ITAB-CHANGENR.
      WCHANGENR = ITAB-CHANGENR.
      EKKEY = ITAB-EKKEY.
      WRITE:/ ITAB-UDATE UNDER 'Change Date',
              ITAB-UTIME UNDER 'Time',
              ITAB-USERNAME UNDER 'User Name',
              ITAB-EKKEY-EBELN UNDER 'PO No',
              ITAB-EKKEY-EBELP UNDER 'Item',
              ITAB-EKKEY-ETENR UNDER 'Sch No',
              INDTEXT     UNDER 'Changes'.
    ELSEIF ITAB-EKKEY NE EKKEY.
      WRITE:/ ITAB-EKKEY-EBELP UNDER 'Item',
              ITAB-EKKEY-ETENR UNDER 'Sch No',
              INDTEXT     UNDER 'Changes'.
    ENDIF.
    CASE ITAB-CHNGIND.
      WHEN 'U'.
        ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
        ASSIGN ITAB-F_NEW(ITAB-OUTLEN) TO <F_NEW>.
        WRITE: / TEXT-023 UNDER 'Changes',
                 <F_OLD>.
        WRITE: / TEXT-024 UNDER 'Changes',
                 <F_NEW>.
      WHEN 'E'.
        ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
        WRITE: TEXT-023 UNDER 'Changes',
               <F_OLD>.
    ENDCASE.
    SKIP.
ENDLOOP.
TOP-OF-PAGE.
WRITE:/ SY-DATUM,SY-UZEIT,
       50 'P U R C H A S E O R D E R   H I S T O R Y',
      120 'Page', SY-PAGNO.
WRITE: / SY-REPID,
         60 'Purchase Orders Changes'.
SKIP.
ULINE.
IF SUDATE = 'X'.
WRITE:/001 'Change Date',
         014 'Time',
         024 'User Name',
         038 'PO No',
         050 'Item',
         057 'Sch No',
         065 'Changes'.
ELSEIF SOBID = 'X'.
WRITE:/001 'PO No',
         013 'Item',
         020 'Sch No',
         028 'Change Date',
         041 'Time',
         051 'User Name',
         065 'Changes'.
ELSE.
WRITE:/001 'User Name',
         015 'Change Date',
         028 'Time',
         038 'PO No',
         050 'Item',
         057 'Sch No',
         065 'Changes'.
ENDIF.
ULINE.
FORM GETCHGDOCS.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
       EXPORTING
            DATE_OF_CHANGE    = CDHDR-UDATE
            OBJECTCLASS       = CDHDR-OBJECTCLAS
            OBJECTID          = CDHDR-OBJECTID
            TIME_OF_CHANGE    = CDHDR-UTIME
            USERNAME          = CDHDR-USERNAME
       TABLES
            I_CDHDR           = ICDHDR
       EXCEPTIONS
            NO_POSITION_FOUND = 1
            OTHERS            = 2.
CHECK SY-SUBRC EQ 0.
DELETE ICDHDR WHERE CHANGE_IND EQ 'I'.
CHECK NOT ICDHDR[] IS INITIAL.
LOOP AT ICDHDR.
    CHECK ICDHDR-UDATE IN XUDATE.
    CHECK ICDHDR-USERNAME IN XNAME.
    CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
                 EXPORTING CHANGENUMBER       = ICDHDR-CHANGENR
                 IMPORTING HEADER             = CDHDR
                 TABLES     EDITPOS            = ICDSHW
                 EXCEPTIONS NO_POSITION_FOUND = 1
                            OTHERS             = 2.
    CHECK SY-SUBRC EQ 0.
    LOOP AT ICDSHW.
      CHECK ICDSHW-TEXT_CASE EQ SPACE.
      MOVE-CORRESPONDING ICDSHW TO ITAB.
      MOVE-CORRESPONDING ICDHDR TO ITAB.
      MOVE ICDSHW-TABKEY+3 TO ITAB-EKKEY.
      APPEND ITAB.
    ENDLOOP.
ENDLOOP.
ENDFORM.
END OF PROGRAM

Hi,
copied from          http://www.sap-img.com/mm001.htm

Month view display and print format

An earlier version of iCal would display (and print) the current month without showing the last few days of the previous month and the first few days of the next month to fill out a week. Is there any way in version 3.0.7 to display and print in this format again?

testing and testing and testing
here the newest info
it is not the letter size. small or caps letters.
i added a new pdf. here under the bold number you must see "581*LAVENDER". but with reader 9.x it looks like the printer cardridge goes empty.
i´ll go crazy with this sh... :-)
thanks
markus

Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

Try Adobe support, that's not a Firefox support issue. <br />
http://forums.adobe.com/index.jspa

Change sided printer back to default single sided printing on hp Officejet Pro 8600 printer

How to change 2-sided printer back to default single sided printing on hp Officejet Pro 8600 printer.

Hi @rdwill13
You can change the default back to single sided in the preferences. I can help you with this. What operating system and version do you have? Mac or Windows?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

In the Print dialog, select the Color Matching tab and then select Vendor Matching.

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

Default display or print methods

Similar Messages

Maybe you are looking for