Default Import Action in the Match records tab in Import Manager

Hi All,
In one of the requirements, I tried importing the data to MDM system from a source XML. The map was already existing and I used the same to work out the import. The same is working fine in the other environment however Development shows some different behaviour.
I got following Default import actions after selecting the matching fields.
4 of 4 Single None Skip - Changed to Create
0 of 0 Single Exact Skip - Updated (All mapped values)
0 of 0 Multiple Exact Skip [I want to make this field as update(all mapped values). However I am only getting two options to be selectied here "Skip" & "Replace". how can I enable the other two options to be selected in Default import action and save the updated map]
I am currently on MDM7.1 SP05.
I tried verifying the field and value mapping, configuration options and it is same as in the othe systems in the environment.
Can someone help me resolve this asap?
Thanks & Regards
Rahul

Hi Kanstantsin, Adrivit
you are right. My Dev and Preprod are in Sp5 and Prod is in SP3 at the moment.
However there's no need for me now to use replace since the intended functionality is met with the earlier two option.
Hi Adrivit,
Well I have the complete data being refreshed in everyday import so it is showing for me the multiple records with exact matching.
In any case, thans for your opinions/suggestions.
I am closign the thread now.

Similar Messages

DELETE THE MATCHED RECORDS IN DB2 TABLE

DELETE THE MATCHED RECORDS IN DB2 TABLE
sql server table sqlserver_emp(c1,c2,c3,4)
records:1 2 3 4
DB2 table db2_emp(c1 key,c2,c3,c4)
records:1 2 5 6 7 8
Both tables having same structure
Matched records : 1 2
1.Delete the matched records in db2 table : 1 2 (without using truncate option for DB2 in Anywhere)
2.Finally Load all records in sql server(Because duplicate records in db2 already removed so no duplicates occured)
3.NEED final OUTPUT AS:db2 table: 5 6 7 8 1 2 3 4
Note:
1.DB2 truncate doesn't used
2.STARING AREA: ORACLE
3.SQLSERVER AND DB2 CLOSED ENVIRONMENT DOESN'T USED AS STAGING AREA.
HOW MANY INTERFACES AND PROCEDURES SHOULD BE CREATE? WHAT ARE THEY?
HOW TO REACH MY REQUIREMNT?
Answer provider is more appricatable.
Thanks in advance.
Edited by: krishna on Nov 9, 2011 8:40 PM

1st option
See in this scenario you can use two interface and one procedure step.
1st interface-->poricedure-->2nd interface
1st interface will bring data to oracle staging-->then procedure will delete matched record from target using keys--->3rd interface will simple insert the the data in oracle staging.
2nd option
Insted of deleting the target matched records, you just update target matched record with latest records in your staging oracle.You can use IKM Merge
Thanks

How to delete the matching records from two internal tables

Hi ,
I have two internal tables say A and B of the same type. If A has 10 records and B has 4 records , I want to delete the 4 records in B from A .
loop at B into wa .
delete A where key = wa - key .
endloop.
takes a long time if the table B is huge. how can I improve the performance.
Thanks.
Gayathri

Hi Gayathri,
You could try field-symbols. It reduces the data transfer from the internal table B to the work area.
field-symbols <fs_itab_b> like line of B.
loop at B assigning <fs_itab_b>.
delete A where key = <fs_itab_b>?-key.
endloop.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

PA30 Delimitation action deleting the old record

For Infotype 2012, when we use PA 30 to delimit the record, the system deletes the record completely. Has anyone come across this issue? How did you solve it?

Hi, Ajay,
Overview of PA30
Existing Record:
Beg Date         End Date               Subtype   Hours
6/1/2009         12/31/9999            ZPOI          480
Use Delimitation, put in 1/1/2010 as the delimitation date, and cliick the delimiation button again.
In the overview of PA30, now the system is showing
Beg Date         End Date               Subtype   Hours
6/1/2009         12/31/2009           ZPOI          480
Exit and then go back to same PERNR using PA20, check overview,
no entry in it any more.
Is that what you are looking for as an example or you need more info?

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
   a.[Remote Key] : Checks the current source rec with
     repository along with all the fields - This is
     default
   b.Remove [Remote key] - by double click the same; and
     choose any single fields like Vendor Number or
     name - Then the current record will be matched
     with the repository based on the field.
   c.Instead of single field you can choose combination
     also.
3. Based on the Match results, match class will be set
   automatically;
   a. None
   b. Single
   c. Multiple
4. Then Match Type
    a.Exact-All the individual value matches are Equal.
    b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
    c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

Tuple Loads using Import Manager

Running on 7.1 SP05 using the SAP supplied Vendor Master repostory archive.
Attempting to load company code data in the Vendors main table. Company Code Data is set-up as a tuple table in Console.
When defining the map in Import Manager it will only allow me to select Vendor Number as the matching field. And, as a result, it will not load all of the data in my load file - it loads the first value of Vendor Number and skips the other records where Vendor Number is duplicated. This makes sense; however, I need to be able to select both Vendor Number and Company Code as my matching fields when defining the map. These two fields are the unique identifier for the load file and all the data would be loaded correctly if I was able to select Company Code as well.
I read where you can set the tuple update option and I did this by adding Company Code, but for some reason, it is still only using Vendor Number as the matching field and not including Company Code with it.
Does anyone know how to get Company Code to appear in the "Mapped destination fields" so that I can match on both Vendor Number and Company Code? Or do other options exist where I could accurately load the tuple table?

You match on the correct vendor in the Match Records tab. This positions you at the correct vendor.
To match on the correct Company Code you use the update tuple option (as you have done). The Company Code should be the only field that you use to match on the Company Code tuple. So, when the incoming record has the same Company Code the tuple will get updated. If the incoming record has a different Company Code, then you can set the options to either create a new tuple or skip the input record.
You can not match on the Company Code in the Match Records tab.
Edited by: Tom Belcher on Feb 18, 2011 10:13 AM

Import Manager Match Records question

Hi
I am following the below file
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0a9cee4-9cd1-2a10-62b6-ea2acb06a5a3
Till 5.2 I have done it successfully
while proceeding through the match records
i.e.
In Import Manager, Match Records------> Default Import Action
is not active to create Records
35 of 35 ->None->None--->SKIP (its inactive)
pls check this screen shot
http://www.flickr.com/photos/11212307@N08/2555733854/
why it is inactive , where should I have to check
Any Help pls
Thanks
manian

Hi,
i have got your Problem, you could come to know if you try this
Create an Excel file as below
Category Type Attribute Value
PC Text A 10
PC Text B 11
Now during import this Taxonomy:
First Map your Source Category Field with your Target Name Field when Select Categories as Destination Table
So in MDM Data Manager: when select Categories as destination Table you will GET PC as Value there.
Noe 2nd step Select Categories( Attributes) as your Destination Table here Map Source Attribute and Type Fields with corresponding Target Destination fields.
If you skip this 2nd step and just go for Saelcting Categories(Text Values) as your Destination table , the problem you describe is come into picture.coz that attributes are not available into MDM data Manager.thats why even for Update All Update Options it is showing 0 Record.
Hope it will clear your doubt,
Rewards if useful.....
Mandeep Saini
Edited by: Mandeep Saini on Jun 6, 2008 9:51 AM

Match Records - Import manager

Dear Experts,
When there is a table with NO DATA init, the match records options work diffrently.
This could be because matching record allways tries to compare source with destination values.
As here the destination table is blank i guess this could be the reason i am not able to judge the outcome.
Lets say i have 3 fields.
name        dept   cost
adapter    IT        20
adapter    IT        20
when i try to import the above data..
matching fileds : name
active     match type      default import action
2 of 2        NONE                 CREATE
Now if i chk the DM i can see only 1 record.
Is this behaviour correct!!! please educate me if i am missing something.
I would like to know how matching records work on a empty table.
Kind Regards
Eva

Hi Eva,
if 2 fileds selected INDIVIDIALLY.
1st field values are duplicated and second field does not have duplicate.
all the records where 1st field duplicates are present ARE NOT IMPORTED.
Yes, your understanding is partial correct, i mean new record will not imported(gets created into MDM) but it can be imported with updated fields with conditions (Partial or conflict) only
Now, when i need to push some data to a table which has data already.
-> it first chks the Matching fields comparision 'within' source fields data first.
-> then it compares the result data and Destination data
See as suggested above, if you select matching field as single field or Multiple fields selection with combined option then it worka as single match for these records if it finds already existing match for the combination of these fields only in that case you will able to update else result in newly created records.
If you go mutliple fields selection with Individual Option, I mean you will able to create new record only if all of these records fields has distinct values e.g. Suppose
Existing record in MDM
Name dept rating
adapter elec 30
will create new record only if your source file has below record.
Name dept rating
adapter1 elec1 40
else if you have any of the record for which any of the fields has same value it will only update the records based on condition as below:
Exact. All the individual value matches are Equal. e.g. source file has values adapter elec 30
Partial. At least one value match is Equal and at least one Undefined;   e.g source file has values adapter 20
here one value is equal adapter, one value is not defined value for dept is null in your source file
Partial. At least one value match is Equal and no value matches are Not Equal e.g source values as adapter elec1 40
Conflict. At least one value match is Equal and at least one value match is Not Equal. e.g. Src value as adapter elec 40
@Sudhanshu, M i right or not. Your understanding is correct. Imported records would be only one of these 1 a d, 1 a z , 2 a b
For more understanding Please refer page 347-348/432 of import Reference guide
http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/72b8e7a42301bae10000000a42189b/MDMImportManager71.pdf
Figure 220. Multiple matching fields (SKU and UPC) and Figure 221. Multiple matching fields (SKU and Mfr. & PartNo.)
Hope it clarifies both of you.
Regards,
Mandeep Saini

Matching records in Import Manager

Dear experts,
I'm using SRM-MDM Catalog 3.0 and I need to create different catalogs using the same records, distinguished only by some fields like Catalog name, Category and supplier.
But because Iu2019m using same product ID, when I try to import the new records I can only update or replace the fields, which was not the idea.
Does anyone know if this scenario is possible?
Thanks in advance.
Best regards,
Andreia Nascimento

Hi Andreia,
For importing new records with same Product ID. In Import Manager under Match Records tab Your Matching fields: should be combination of Product ID, Catalog Name, Category and Supplier rather than Product ID only. This will result in importing new records rather than update or replace the fields.
Regards,
Mandeep Saini

Update (All Mapped Fields) Import Action creates a new record.....

Hi All,
I am on MDM 5.5 sp6,and this weird thing happens everytime i run the "update all mapped fields" option in the import manager,it creates a new duplicate field with the updated value record.Is this a bug in sp6 or I guess i am going wrong somewhere.I want to update a particular field in the qualified table and i am using a import file which has values for qualified field on the main table and the values for the qualified table itself.
Any Help greatly appreciated
Thanks

Hi Aravind,
I am on MDM 5.5 sp6,and this weird thing happens everytime i run the "update all mapped fields" option in the import manager,it creates a new duplicate field with the updated value record.Is this a bug in sp6 or I guess i am going wrong somewhere.I want to update a particular field in the qualified table and i am using a import file which has values for qualified field on the main table and the values for the qualified table itself.
MDM should not behave in this way. I thing there is an issue with the Matching Field you have choosen.
I think you have choosen all the FIeld as the Matching Field ( Tab) while IMporting.
Hence any change in any value, creates another dupliacte record( which we do not want)
Please select any Field with unique values ( like the Material ID, Customer ID etc) which will ensure that the particular records are updated with the new Values coming in.
You will find the new value getting updated for the records which are already present. It will not create a duplicate record
Hope it helps.
*Please reward points if helpful
Thanks and Regards
Nitin Jain

Blank Screen in Import Manager under Import Status Tab

Hi Experts,
Problem: Blank Screen in Import Manager under Import Status Tab.
I have opened import manager with source file(excel & xml) and i have also did mapping from source fields to destination fields and also seleted display/key field in match records tab and refreshed it. when I select Import Status tab. I am not able to see any details/status regarding the map which i have done. when i click on excute button.. the source file is sucessfully import and pop up dailogue box shown. I have also checked in Data Manager and data was visible.
But.. at Import Status Tab in import manager.. i am not able to see any details.. it is just showing as white blank screen.
If any one know the solution could you please help me out.
Thanks
Bharat

Hi Bharat,
As per New MDM Release we have to Install MDM 7.1 servers on 64 bit machine and GUI's can be installed on 32 machine, whreas if you are using MDM 5.5 Version then 32 bit machine can be used.
Now as you said that you have sucessfully imported the excel file and then you have mapped the filed after that without any error you got the ready to import screen to import the data into MDM database then processwise there is no problem as far as screens are concern i will suggest you please un-install MDM Import Manager GUI and then again install it, your problem would be solved.
If it doesnt please do let us know.
Thanks and Regards
Praful.

Match Records Error

Hi Sdners,
I am facing some problem in the match records process in the import manager.
After I map the fields when I add the display fields in the matching fields as a combination , the process continous for a particular time period after which it stops processing without even showing any error.
Does this have to do with any of the configuration settings to be done
in the import manager.
Thanks in Advance.
Minaz

Hi,
Just check the Import Status tab. If the status is Ready for Import that means your mapping is proper.
If i have not interpreted your query properly kindly explain in slightly different way.
Regards,
Jitesh Talreja

Which operator should i used for loading not matched records

HI ALL,
I am just evluate OWB tools.
and i met a question.
I need to join two tables A and B with Condition A.id=B.id
For example,
A has 1000 records, and B has 100 records,
what i need to do is
(1) to get matched 100 record from B to a new table C,
(2)to get the not matched 900 records from A to another table D.
By the requirement like above, which operator could i use for?
I tried to use joined but can not get the record of (2).
Thanks for your attention.
Regards

Hi,Sutirtha
Thanks for your attention.
because joiner has only one output group.
so what you mean is use joiner operator twice?
One joiner userd to get the matched records,
and the other used to get unmatched records?
Thanks
Rachel

To find matching records across two tables

Hi folks,
I have a question regarding modifying the query. I am trying to compare the data between two tables, there are matching records in two tables, but are not in the same order. How to modify the query so that it finds the matching record between the two tables?
Here is my code
loop at itab_A.
      read table itab_B with key
             employeenumber = itab_zmgr_training-empid binary search.
          if sy-subrc = 0.
Any thoughts?
Thanks,
Sk
Here I am getting the return value as '4'

I have tried all that, but why is it that while reading a record from itab_B I see no record in the header line,
Let me paste the entire code of what I am trying to achieve.
data: itab_A like A occurs 0 with header line.
data: itab_B like B occurs 0 with header line.
some validation.....
loop at itab_A.
read table itab_B with key employee number = empid binary search.
if sy-subrc =0.
per form validation.
else.
perform validation.
endif.
endloop.
My observation: while reading recrod from itab_B the header line is clear, no record is read here hence sy-subrc = 0.
How can I correct this? Since it is not reading any record from itab_B no matching record is found.
Any thoughts would be really helpful.
Thanks,
Santhosh.

What is "Uninstalled Processes" in the App History tab in the Task Manager?

In the App History tab in Task Manager there is an entry for "Uninstalled processes". It
hasn't used much CPU time but it use too much from network. I scanned my PC by BitDefender [full scan] but it didn't remove and also i tired to reboot my PC but it's still there! and it's still taking from my network.
What is it???!
Screenshot,
http://i.imgur.com/MeyjyxD.png

Can you please go through the list of Apps. Did you install any new Apps which looks like consuming too much network bandwidth?
Also from the screenshot, I see lot of programs on the desktop. I recommended uninstalling software cos I see lot of programs on the desktops related to system maintenance. Wondering if any of these programs is responsible for the process.
I apollogize for not able to point out to a single culprit. This is one of the cases where you have to try uninstalling programs one by one and check if it removed the process.

Default Import Action in the Match records tab in Import Manager

Similar Messages

Maybe you are looking for