Default "Recoverable Tax" account - cost center segment to specific value

Dear all,
I have tried couple of days to see how to use subledger accounting setup to default cost center of recoverable tax account (recoverable tax account - cost center segment to specific value which is based on the cost center of invoice distribution), however it is not succesful.
I think might be some of the setup is wrong, please see below my setup steps:
1) Set up Account Derivation Rules
Copy rule code AP_INVOICE_DIST to T_AP_INVOICE_DIST with adding a source ='Recoverable tax", condition = Invoice Distribution Account is not null
2) Setup Journal Lines Definition
3) Setup Accounting Accounting Definition
Please advice.

Madhu,
I did some investigation too and it looks like this is only way i can do this.
Do you think of any User Exit name, which i can use it here?
Thank you and appreciate your help.

Similar Messages

  • Error~ PR G/l Account & cost center is not appearing in PO while copying

    Dear All,
    I am converting PR into PO, while creating PR I  have assigned account assignment cat as "K"(cost center ), so i assigned Cost center and G/L account , After this I tried to convert this into PO, but in PO again it is asking for G/L account & cost center  onemore time,Earlier it wasn't .
    May be some where the setting got changed but I am unable to find where exactly this setting got changed.
    Please anyone could help in this.
    Regards,
    Nagaraj S

    well thats really wiered
    can u do one thing in your quality system create one PO and pleas but  make sure the data in the po sholud be same as that of PR but this PO will be created without the reference of PR
    i want to check if system is able to find the G/L account automatically which ideally it should find
    in case the g/l is not picked automatically then in that case check the valuation class in material master and the g/l which is maintained in gbb or not and make sure the g/l is a cost element
    if the g/l comes automatically then check the PO document type settings in the those 2 folder at the left poriton of screen in IMG>>olme>>POdefine document type

  • Budgeting on account & cost center level

    Hi ALL, My company is planning to implement SAP in the near future and I'm taking the SAP course now. According to what SAP instrcutor said, budgeting cannot be done on account & cost center level. In my company, our current practice is to record all budget figures under account & cost center level and for every expense (invoice or journal) input, account & cost center would be the mandatory fields so that budgeting can be monitored in such level.
    Can anyone tell me how this can be handled in SAP?

    HI
    DONT TRUST  that type of words.
    i hope that your instructer is not a real time guy.
    we have to do  Budgeting at cost center lavel in Cash Budget management. why because that is (Cost Centyer)Orgnisational level Responsibility Area
    and item level in Funds mangement.
    But for every expence you want do the budget you have to implement Funds mange ment Module.
    then your item level budgeting will be solved.
    Thanks & Regards
    Mala K Reddy. Vundela

  • WBS as default Acct Assgnmt  for Cost Center

    Hi experts !
    I need to save WBS as default Acct Assgnmt  for Cost Center (transaction KA01). I do not have  it on the screen. Would anyone help me, where I can change this sceen in spro ?
    Rgds, Stenwa

    Hi,
    I believe, you mean for cost element (and not cost centre). You can solve it by substitution (OKC9).
    Regards,
    Eli

  • Tax account cost object problem

    Hello Experts,
    I have configured HST tax codes in ON Canada i.e 5% going in to BS acc and 8% going in to P&L acc. The 8% portion of tax is non recoverable but it reportable thatu2019s why client wants to post it to a separate P&L acc.
    Issue isu2026
    When I am doing MIRO, I select the HST tax code and simulate it but system is asking for a cost object for this 8% P&L tax acc(off course it is standard), but the real problem is the cost center/WBS element fields are grayed out and I canu2019t enter the cost center here. Clients wants to enter the under lined expenses line item cost center here (doesnu2019t want to default cost center OKB9)
    With manual invoice FB60,.. no problem at all,..I can double click the 8% P&L tax acc and enter the cost center.
    Please advice how does resolve this issue. Any solutions please welcome.
    Regards
    Madhu

    Madhu,
    I did some investigation too and it looks like this is only way i can do this.
    Do you think of any User Exit name, which i can use it here?
    Thank you and appreciate your help.

  • Default Internal order and cost center

    Hi Experts,
    i am uploading one file into sap and here i am giving GL accounts cost centers and WBS elements.
    once i have done with upload.when i am checking in BSEG its showing one internal order and one default cost center with internal order.
    i can not understand how its finding internal order and default cost cente(which diffetrent from those cost centers i have mentioned in excel).
    please help me to find.
    thanks,
    Vani

    HI,
    Thanks for your reply.
    i have checked OKB9 and KA03 but there is no default assignment.
    checked also OBBH and OKC9 but no subtitution and i can't post manually now.
    is there any option.
    Waiting for your reply.
    Thanks,
    Vani

  • Management or Cost Center Segment

    Hi
    I am newbie and setting up my accounting flexfield segments. I want to have department as one of the segment. How should I qualify it as Cost Center or Management. I want to track the budget and expense by the department.
    I would really .appreciate all your advice.
    Regards
    Reem

    Hi
    use the below link which will give you more idea of Management segment Qualier with an demonstrated example.
    http://www.oracleappshub.com/release12/r12-management-reporting-security/
    Regards
    Madhav G
    Note: if you question is answered please mark the thread as answered and also mark weather the answer provided is correct/helpful.

  • Tax account cost element

    Hi dear all
    i am creating  cost elements in our company.But i have one query. Can i create primary cost element for tax category GL account as CO is used for internal reporting purpose only. I am little confused regarding this.
    Please any one give me suggestion
    Any Help will be appreciable.
    Thanks in advance
    nilesh

    Hello,
    Yes..you can create Primary CE for your Tax account..though CO is used for internal accounting/reporting, there should be a primary CE  for your GL ...to reflect true postings/reporting....
    Hope this helps
    Rgds
    Rajendra

  • Unplanned Delivery Costs Post to a different GL Account Cost Center err

    Hi,
    We added GL account  in config (OBYC >> UPF Transaction key ) such that 'Unplanned Delivery Costs' entered during invoice entry in MIRO will be posted a different GL account. We also changed in config from 'Distribute among invoice items' to 'Different GL Line'.
    When we try to post Invoice and add amount in 'Unplanned delivery costs' field in MIRO, system is giving error to enter 'Cost Center' since GL account characteristics is such  that Cost center is mandatory. The Cost Center field at item level in MIRO is disabled. Remember, we want to process this for INVENTORY items only, meaning items that go to stock and later issued, and not for POs created with 'Cost center' as Account assignment. We can create another GL and no cost element and assign that GL Account in OBYC for UPF Transaction key, but the client's requirement is to create 'Cost Accounting Doc' too when invoice is posted, along with Accounting and profit center docs.
    How do we fix above error ?
    Niranjan

    Closing this thread as the heading of the 'message' did not appear properly. Posting another message so heading of 'message' shows correctly.
    Niranjan

  • Non-Recoverable Tax Accounting for Purchasing of OPM Item

    Hi,
    As an industry practice and standard functionality of Oracle Inventory, Non-Recoverable TAX (tax paid upon purchase of items is not recovered through sales tax) is charged to the Inventory. However, this functionality is not available in OPM Inventory, due to which the non-recoverable tax amount remains as a debit balance in ISP (Receiving Inspection Account). Can anyone help us with regard to charging this amount to OPM Inventory.
    Thanks in anticipation.
    Regards,
    Hammad.

    Not got a reply, hence closing this thread

  • Validation for GL Account & Cost Center combination

    hi. i want to prevent gl postings to combination of gl account 123 and cost center abc.  the validation created via ggb0 under financial accounting, line items looks like this:
    PreReq:    BSEG-KOSTL = 'abc'
    Check:      BSEG-HKONT = '123'
    Message:  "Invalid Acct/Cost Ctr combo"
    but when i do f-02 for gl 123 cost center abc, the warning message doesnt appear.
    any insight is much appreciated!

    Hello,
      I did the same in our org. change the condition of check into prerequiste and prerequisite into check then it will work and in OB28 activate the same for your company code.
    Regards,
    sankar

  • Account/Cost Center Determination (OKB9) for same plant & 2 cost centers.

    Hi,
    I faced a weird situation My situation is i have the same plant but 2 different profit center's & 2 different cost center's . My OKB9 cost element is configured through "Plant/Valuation Area (1)".
    Previously when ever we used this "Plant/valuation Area" determination we used to give plant and corresponding cost center and left other fields like Business Area, Order and profit center blank. see below thing for clear idea
    Plant A - Cost Center A
    Plant B - Cost Center B
    Now with this weird situation, i am not sure whether we can configure OKB9  as below
    Plant A - Cost Center A - Profit Center A
    Plant A - Cost Center B - Profit Center B
    If we can do as above, will their be any implications.
    could anyone help me out of this situation.
    Thanks
    Shriya

    HI
    No complications for this u can assign the CCtrs to Profit Centres.
    Regards
    Shammi

  • G/L Account, Cost Center, Profit Center closing downstream issue

    Hello,
    We have issue and I hope most of you must be having this, kind of organization we are every year we need to close down some G/L or Profit Center or Cost Center, however there can be 1000's of reason where you need to reverse document  but problem is Object like G/L, Profit center or cost center are already closed and hence reversal gets error out.
    Do anyone have any thoughts how to handle this more better.
    Thanks
    parth

    Hi Parth
    1. Either you need to unblock the master data temporarily
    2. As a Best Practice, if you intend to discontinue a master from 01.01.2014 onwards, have it open till say, 30.06.2014 or any date as agreed by all.. So that, reversals wont be affected
    Br, Ajay M

  • Copa assessment from cost center posted with zero values

    Hello all,
    We are running for the first time in my clients system assessment cycle for actual values from cost center t copa
    The cycle at the test run shows the values and the reciever tracing factor allright but in update run the document created with zero values
    Can anyone adress me why this happnes
    Thanks
    Michal

    Hi,
    You must be getting some errors in update run, like profit center update (if new gl active) or other, please check and revert.
    Br

  • AP invoice with different tax rate and cost center?

    Dear all,
    We are just upgrade from 11i to R12.1.3. Before in 11i, we can change distribution account in AP invoice distribution line if the type is "Tax". However, after updated to R12, we define tax code (e.g. P1 for particular account combination), so once user selects tax code "P1" and invoice will automatic creates tax line for such invoice but the user cannot change distribution account anymore. Because in 11i, user will change the distribution account (cost center segment) but now in R12 user cannot change it.
    The only work around is defining different tax code for different cost center.
    For example: P1-0001 => 01.0000.999999.00001
    P2-0001 => 01.0000.999999.00002
    We have hundred of tax code and cost center combination.
    Any other work around for this? or anyone encounter the same problem?
    Please advice.
    Thanks.

    Let me explain more in details:
    1) The cost centre will will more. 2 cost centres just a simple example.
    For now, we have 5 cost centres for each of the tax rate. For the work around now, I need to define 5 tax codes for the same tax rate for different distribution combinations:
    Quote
    Tax Code ==>Tax Rate ==> AP Distribution Combination
    A1-3500 ==> 10% ==>001.9999999.3500.00
    A1-3600 ==> 10%==> 001.9999999.3600.00
    A1-3700 ==> 10%==> 001.9999999.3700.00
    A1-3800 ==> 10%==> 001.9999999.3800.00
    A1-3900 ==> 10%==> 001.9999999.3900.00
    2) The driving factor would be 100% percent.
    Please kindly advice.
    Many thanks.
    driving factor for the cost centre

Maybe you are looking for