Default Storage Category for easyDMS

Hello Everyone,
I currently assigned default storage category (using KPRO) for my user on,
easyDMS -> Organize -> Preferences -> System (Tab)
How can I make this storage category defaulted for all the users using easyDMS?
Regards,
Mohan

Hello Chandu,
I already have above mentioned settings available in SPRO, these settings works for GUI and NWBC.
What that means is, there is no pop up window with Storage Categories to select while performing Document Check-In.
In easyDMS, system still asks user to manually select the Storage Category, I added Storage category for my user profile on easy preferences and I believe this needs to be done for all the users using easyDMS.
I would like to know how can I apply this change to all the users from configuration/system point of view.
Thank you
Mohan

Similar Messages

Default item category for components in task list

Hii all,
I need one help. We need to maintain default item category for components in task list.
Currently it comes as "L" and the field is non editable.
Is there any way wherein i can edit the item category to "N" or any other. Also need to know why this category "L" appears?
I can brint the default item category in the service order by the standard config.(PM/CS--> Maint & serv processing --> Main & Service orders --> General data --> define default values for component item categories)
But i want it in the task list.
Please help
Regards,
Vijay

Hi Vijay,
Just go to task list and then to component. go to item category field and press F1 (help)
its mention
Item Category (Bill of Material)
Categorization of the items in a BOM according to set criteria, such as whether they refer to an object (for example, material master or document info record) or whether they are kept in stock.
To my knowledge It wont be possilbe have item category N in task list by directly adding material.
Hi Pete,
Correct me if i am wrong that configuration setting for default material type and item category works for orders only.

Default storage location for transfer posting

Hi Gurus,
In transfer posting using mvt type 311,i want to make the storage location defaulted by a particular storage location. In other words system should not allow transfer posting if i use other storage location. Is this possible?
Regards,
Kumar

[Restrict user to post to a particular storage location|Restrict user to post 313 to a particular storage location.]

How do I change the default storage file for PDFs?

I want to save PDFs. Now the default files are in AppData/Local/Microsoft/Windows/Temporary Internet Files/Content IE5/V6ZGH08N. I have to drill UP through all those to get to where I want to save the item in PDF Files. How can I change the default?

The file path (AppData/Local/Microsoft/Windows/Temporary Internet Files/Content IE5/V6ZGH08N) that you posted is the internet cache of the MS Internet Explorer and not a location that Firefox uses although MS plugins like the Windows Media Player will use that location.
Files that are opened in an external program will be saved to the temp folder as specified in the %temp% and %tmp% environment variables.
What makes you think that Firefox is saving PDF file in that folder?
Are you using an extension like IE Tab or IE View to open specific locations with IE?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

What is the default storage direction for geograhic coordinates NE or EN ?

Hey
I got some data stored in WGS 84 (SRID 8307).
As I read the data, the map was 90 degree rotated or not
depanded on the map-viewer I used.
So can any one tell me in with direction is the right way
to store the coordinates North, East or East, North?
tschau
Andreas

If it is 90 degrees rotated, you probably switched long/lats in the sdo_geometry.
We store them as long/lat (x being the longitude, y being the latitude).
So x axis is from -180 to 180 and y is from -90 to 90.
siva

Set default storage categories

Hello,
We have content server on MaxDB with several repositories and storage categories.
How can I limit users for storage categories/repositories?
How can I configure a default storage category for user/document?
Thank you for your support,
Yossef

Hi Yossi
You can use profile option in DMS for this. More information on Profile option you can get in the community.
You can get detailed help in help.sap.com>erp>dms.> ..>defaut values for original application files.
Regards
Prasad

Storage category not defaulted during DMS doc. creation

Hi Experts
We are manually creating DMS Document info record with transaction CV03N and we are attaching some business document to it. As the "Storage category" is not defaulted with any value, the document attached is stored in the local PC memory instead of the content server.
It seems the configurations are in place.
1) Profile key created
2) Profile key assigned to role
3) Role assigned to User
4) Storage Cat. Assigned for the profile key and application key
Can you please let me know if I am missing anything?
Regards
Gobinathan G

Dear Gobinathan Govindarajan ,
Follow the steps as mentioned.
1. Create a storage category. I think you must haave alrady created for Exp say "ZHRW".
2. Go to "Define Profile"
3. Define profile say "ZREJP" give description "TEST"
4. Select profile "ZREJP" and double click "Assign groups/user to the profiles"
5. Enter Profile "ZREJP" and role or User ID to which the profile key is to be ssigned. Assign Profile key to only ROle or to user only.
6.Go Back.
7. Select profile "ZREJP" and double click "Determine definitions for applications".
8. Enter Profile "ZREJP" and against it enter " Worstation application say"xls" and storage category "ZHRW". and tick all check boxes.
9. Carry out step 8 for application you will be using.
10. Save and then try for the User whether the original is getting checked in default storage category "ZHRW"
11. If you want to ensure checkin should happen when DIR is saved go to DC10 and in Doc type status configuration for each status you have defined click the check box "Checkin required. so when user save DIR without checkin of files , the system will checkin the file in default storage category automaticall.
Hope it works for you.
With Warm Regards

Default storage for locally managed tablespaces

the documentation says you cannot have a default storage parameter for locally managed tablespaces. Does this mean that we cannot specify
INITIAL
NEXT
PCTINCREASE
MINEXTENTS
MAXEXTENTS for such tablespaces, or is there another way we can, without using default storage?
thanks

I amnot sure where you read that part that the default storage clause can't be given.Please see here,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1149
From the doc,
Creating a Locally Managed Tablespace
If the CREATE TABLESPACE statement includes a DEFAULT storage clause, then the database considers the following:
If you specified the MINIMUM EXTENT clause, the database evaluates whether the values of MINIMUM EXTENT, INITIAL, and NEXT are equal and the value of PCTINCREASE is 0. If so, the database creates a locally managed uniform tablespace with extent size = INITIAL. If the MINIMUM EXTENT, INITIAL, and NEXT parameters are not equal, or if PCTINCREASE is not 0, the database ignores any extent storage parameters you may specify and creates a locally managed, autoallocated tablespace.
If you did not specify MINIMUM EXTENT clause, the database evaluates only whether the storage values of INITIAL and NEXT are equal and PCTINCREASE is 0. If so, the tablespace is locally managed and uniform. Otherwise, the tablespace is locally managed and autoallocated.
HTH
Aman....

Default Storage Location - in DMS

Dear Gurus,
I am trying to integrate SAP Easy Document with DMS. I am able to chekc-in the file with Tcode CV01n in to storage category whcih I have created. But when I try to check-in the file through SAP Easy Document, system will give the error as " Error while check in storing".
I think SAP easy document is taking some other storage catogory by dafult. How can I default the storage catogory which I have created.
Thanks
Damodar Pai

Hi,
please check the following
1.)When logging on via Easy DMS for the first time, system will prompt you to create a root folder. Confirm dialog box with u201Cyesu201D and enter name of the root folder.
2.)When creating the first document (see Business Process Procedure script) of a particular document type, select the appropriate type from the dialog box (for example XLS for Microsoft excel files) and activate the checkbox Use this application for all files with this extension. Choose OK.
3.)When creating the first document (see Business Process Procedure script), select default storage u201CDMS_C1_STu201D and activate the checkbox Use this storage category for all files. Choose OK.
note : use your storage catagory!
Benakaraj
??P

DMS- Profile - Assigning Storage Category to Users

Hi All
I want the storage categories of the Content Servers to be mapped to User Profiles, so that while checking in the step "Check in to Kpro and Selecting the storage category" can be avoided.
I tried with the "Define Profile" node in spro, in that we have to select each Work station application and map the storage category. I read in one thread that using * in place of work station application selects all, but it isnt wrking..
Has anyone tried any method for this??.. I want all workstaion applications to be mapped to one storage category for a user - in a single step, not by adding all workstation applications....
Regards
Aby

Hi Aby,
if setting up a profile does not help, another proposal would be to use the BADI DOCUMENT_STORAGE01 with method BEFORE_LIST_STORAGECAT. Because here you will be able to influence which storage categories are displayed at "Check in to Kpro and Selecting the storage category". If only one category is handed back by the BADI method the pop-up should be avoided and the selected category should be choosen.
Maybe this could be a solution.
Best regards,
Christoph

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Set Default category for IBASE

Hi Experts,
I have an issue with Ibase and that is I need to set a default category for the IBASE as '01'.
Though there is only one category is there for Ibase I am still getting the pop-up for the Selection when I click on IBASE-Create in Web UI.
The requirement is not to have the pop-up for selection and it should take default category when i say create on IBASE.
plz help me in this regards.Any help is appreciated .
thanking U for the help,
Sree.

Hi kasper /rohit,
pls look into this and provide some insight to me.
here is the code .
code from ip_create() method to block pop up is
CONSTANTS: lc_maxrow1 TYPE int4 VALUE 1,
DESCRIBE TABLE gt_ibtyp LINES lv_rows.
IF lv_rows > lc_maxrow1.
     CHECK SY-SUBRC = 0.
*   lv_rows = lc_maxrow.
lv_title = text-cre.
lv_descr = text-sel.
create_popup = comp_controller->window_manager->create_decision_popup( iv_title             = lv_title
                                                                         iv_description       = lv_descr
                                                                         iv_visible_row_count = lv_rows
                                                                         iv_display_table     = gt_ibtyp
                                                                         iv_visible_columns   = lt_col_def ).
create_popup->set_on_close_event( iv_event_name = 'CREATE_POPUP_CLOSED' iv_view = me )."#EC NOTEXT
create_popup->open( ).
ENDIF.
it has stopped the creation of pop up and in the method EH_ONCREATE i wrote
ls_param-name = cl_crm_ibase_il_constant=>createparam.
ls_param-value = '01'.
* ls_param-value = ls_ibtyp-ibtyp.
APPEND ls_param TO lt_param.
lr_bol_core = cl_crm_bol_core=>get_instance( ).
TRY.
      CALL METHOD lr_bol_core->root_create
        EXPORTING
          iv_object_name = cl_crm_ibase_il_constant=>root_object
          iv_create_param = lt_param
          iv_number       = 1
        RECEIVING
          rv_result       = lr_root.
    CATCH cx_crm_unsupported_object .
ENDTRY.
CHECK lr_root IS BOUND.
entity ?= lr_root->get_current( ).
IF entity->lock( ) = abap_true.
    entity->switch_to_change_mode( ).
ENDIF.
Here the problem is the ibheader component is not getting the data
which it used to get by selecting the category in pop up and
all the screen is empty with out any data.
Is there anything to be written in IP_MAIN or some thing to be added to the existing code.
Thanking U,
Sree.
Edited by: Sree on Dec 3, 2008 2:32 AM

How to check in document in default storage when using CV01N?

Hi community!
I was in the process of configuring content server for an ECC 6.0.
I had installed the content server version 4.6 in a separate system and its working well.
Then i finished all the configurations relating to creation of repository and linking it to content server through CSADMIN. I am setting in DC10 use KPRO. In transaction spro Cross-Application Components --> Document Management --> General Data --> Define Profile. I am create a profile, which can be assigned either to a role. Under "Determine definitions for applications" i am define a storage category to a workstation-application. However, when I go to CV01N, and try to check in a new document i did not even get the drop down list instead of my default value. Saves if I manually select "Check In". Am I missing a step??
Edited by: Igor Polushkin on Apr 15, 2010 1:55 PM

Hi Igor,
If there is no profile based on user-id then it calls FM SUSR_USER_AGR_ACTIVITYGR_GET to check if there are any roles existing with the user-id assigned to it. For example: it returns one role.
Now if this role is assigned to two different profiles, then the system picks anyone profile and accordingly use the settings maintained to this profile.
Please make sure that if a user-id is assigned to more than one role and both these roles is used in different profiles then in this case you have to explicitly mention the user-id in the profile directly rather than using only the role name.
Below is the explanation with example :
Consider that USER_1 is assigned to ROLE_1 and ROLE_2. And this USER_1 is linked to two different profiles using these roles. If you want that USER_1 should use Profile_1 please make the settings as below :
Profile_Key     Role      User Name
Profile_1       ROLE_1       USER_1
Profile_2       ROLE_2        -
The below settings does not work, as system can pick wrong profile.
Profile_Key     Role      User Name
Profile_1       ROLE_1        -
Profile_2       ROLE_2        -
I hope this information could be useful for you and help to get your profile settings work.
Another solution for controlling which storage category will be choosen is to use an implementation of BADI DOCUMENT_STORAGE01 with method BEFORE_LIST_STORAGECAT.
Best regards,
Christoph

Link between DMS DIR's and Storage Category

Hello Experts,
How can i link DMS Document type to Storage category?
I have a requirement of storing different DIR document type in different storage category so can you please inform me in which transaction i need to assign Document types with content category.
-Thanks,
Ajay

Hi Christoph,
To understand more on the Storage category configuration -
At present there are 10 Document type which is having common Storage category and it will be selected as default when user create DIR's and attach documents to it.
My question is - Is it hardcoded in program of use common storage category? OR is there any place for configuration (Transaction code)?
-Thanks,
Ajay

Automatic storage location for a material

Hi,
Can anybody help on following issue-
Could we set up by Material number for each plant, which Default storage location ( and/or shipping point ) will automatically show up in order entry.
Pls. guide.
Regards

Hello,
Your requirements are standard & can be met.
Automatic/default Shipping Point:
Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Define Shipping Conditions.
You enter the shipping conditions in the customer master - sales area data - shipping screen. Also in the sales document type configuration in VOV8, you can enter the shipping point. If you enter the shipping point in the sales document then this entry will overwrite the entry of the customer master.
Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Define Loading Groups.
You enter the loading group in the material master - sales: general/plant data screen.
Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points.
Here you will find as under:
Shipping conditions + Loading group + Plant = Shipping Point.
Default Storage location:
Go to IMG - logistics execution - shipping - picking - Determine Picking Location - Define Storage Conditions.
Here you define the storage conditions which you enter in the material master - General Plant Data / Storage screen.
Now go to IMG - logistics execution - shipping - picking - Determine Picking Location - Assign Picking Locations.
Here you will find as under:
Shipping Point + Plantb + Storage conditions = Storage location.
Maintain the data in the customer as well as material master correctly & the assignments should be as per the data maintained. Then whenever you will create a sales order, the system will determine the default shipping point & the storage location.
Reward points if solution helps.
With best regards,
Allabaqsh G. Patil.

Default Storage Category for easyDMS

Similar Messages

Maybe you are looking for