Default Storage Unit in LT01

Hi experts,
When i create a tranfer order (LT01 tranx) field LTAP-VLENR appears with a value (SU) by deffault.
However, executing LT01 with the same material, with different Sotrage Type, this field appears empty,
In the other hand, in LT12 tranx, the system doesn't allow me save without SU.
I have checked customizing settings but i can not find the reason of this behaviour.
Thank you

Ideally if you are managing stock in SU..when executing the stock movement via LT01 you should enter the source SU (the very thing that is missing in your case) in the source line. This is because physically when you are executing the transfer you know your source SU.
But i guess you are entering the Source Bin and storage Type or only the source storage type.
I feel in that case for the qty of material enetered the system is unable to find the unique source SU. Check if you have multiple SU for the same material in the source Bin (if that is allowed). That could be the problem.

Similar Messages

Default the storage unit type

Hi Experts,
Is it possible default the storage unit type in LT04 ?
if yes, kindly advise how to configure in SPRO?
Thanks.
Regards,
Steven

Hi
Not sure if you use HU and packing material. You can try through this config
IMG-Logistics General - Handling Unit management - Basics - Warehouse Management - Assign Storage Unit type to Packing Material Type.
For every packing material you can maintain a default storage unit type
Regards
Jayaram

Storage unit type not found automatically on LT01

Hi,
We have just only one kind of storage unit type in the settings. I want it to be determined automatically on TO creation(LT01) , so that the user is not required to enter it everytime he creates a TO
I couldnt find a way to do it via custimizing. Appreciate any tips about it.
Thanks
Cihan Polat

Hi,
I dont have a problem with storage type determination.
Acctually what is missing on LT01 is storage type indicator LTAP-LETYP (EXP for my example).
This is the field on the second screen of LT01 (SAPML03T- 102).
It is located under quantity, which is just second line on the screen.
Requested qty    1                 PC   5SQ2 370-0KA06 /N-OTM.C6 3pol
Stor. unit type      EXP                   Material        5SQ23700KA06
Certificate no.                         Plant/Stor.loc. 1000   1550
Confirm
Printer                                 Stock category
GR date          12.04.2010             Special stock
                                        TO item         0
Tpe Sec Stor.bin    Target quantity   AUn
Src                                         0 PC
Dest                                        0 PC
Ret.                                        0 PC
Goods recipient                         Weight                   0,000

To Create New Storage Unit Automatically

Hi all,
I need some info for creating storage bin. I have a material with 100 KG in a storage unit XYZ. And i want to move 20 KG of 100 KG to new storage unit.
First i call BAPI_GOODSMVT_CREATE with movement type 311 with new quant 20 KG to create a new storage unit. After that i call L_TO_CREATE_POSTING_CHANGE for transfer posting.
But it does no effect to material. It have 311 movement successfully but than it puts the 20 KG to the same storage unit XYZ. How can i move it to a new storage unit ?
Regards,
techmaster

If you only want to do a WM transfer (manually with LT01), you can use L_TO_CREATE_SINGLE.
Best Regards, Dirk

Storage unit types

Hello,
I would like to know how to assign storage unit types for a stroage unit. are there any restrictions to assign a particular storage unit type for a storage unit.
Thanks,
Maxx

Hello Maxx,
When you create Transfer order at that time you need to mention the storage unit type for that transaction and based on that it will assign storage unit type to storage unit.
There are some controls for this
- Storage type level: Here you restric what are the storage unit type allowed for that particular storage type (Tran code: OMM1)
- You can activate SUT check for storage type in master data for storage type.
- You can define the Storage unit type in Material master which will be defaulted when you do pallatization
Hope this helps.
Regards
Arif Mansuri

Storage Unit type controlling

Hi,
I have really a serious problem about storage unit type controlling in my wm project.
I desinged the warehouse system according to some backround jobs like RLAUTA10. All my storage types managed with stoge units but we have just one storage unit type 001. But the problem is that when program RLAUTA10 run it gets errors about storage unit type. The job asks in every transfer requirement sut.I have just one sut and it must be default sut in system. Than the pragram RLAUTA10 can run as a backround job succuessfully.
Thanks.

Hello,
Please check if you have maintained the palletization data in the material master in WM2 view.
If you havent thats probably the cause why your background jobs are asking for SUT in TR's/
Please check and hope this helps.
Thanks,

Warehouse storage unit number by userexit

Hi
The requiremnet is to get the storage unit number from the user exit not from the internalnumber range set in configuarion. The function module used here is CONVERSION_EXIT_LENUM_OUTPUT.And we set the the value 3 in sunmber conversion(omnn transaction).Hope if we set the value to 3 then it will call the function module and the number we set in the userexit will trigger.
Now we are getting the number as mentioned in the userexit in transaction LT01. But it gives the number in display mode(lt21) also and gets appearing in the past transferorders in the table.If any prerequistion required the please let us know.
Anybodyhave the experience in this please helpus.
Thanks in advance.
Regards
Maharajan

Hi,
Try LS11 might help you.
Regards,
Ninad Kshirsagar

Storage Unit number in SAP is showing on SAP but user getting invalid trans

Regarding the Storage unit TS0C230037 issue.
Checked storage unit TS0C230037 in the transaction LS33 & Table LEIN. This storage unit doesn't exists in Transaction data as well as table entry level
Currently I couldn't even see the storage unit in system.
Note: I could see this Storage unit TS0C230037 in LX03 Transaction code. But when I double click on the storage unit it says Storage unit TS0C230037 cannot be displayed.
Customer want move the available 4 Qty stock from that storage unit to other storage unit.
Kindly advise.

Awesome, gr8.
Thank you Kiran.
But, not sure ,
1) How did you figure it out that this (just 4 fields) is bcz of UI Guideline app param?
2) If so, how do you know GL11 will fix it?
3) how do you know we are having GL20 in place, bcz in the below sap help link sap said GL11 is the default?
4) In which component SAP hard coded as 4?
5) Pls. let us know what are other params we need to check/test for our custom app?
Application Parameters and URL Parameters - Web Dynpro ABAP - SAP Library
Thank you

CJ20N, auto-defaulted storage location at activity level

Hi all,
we have this problem at CJ20N (PS) screen.
At activity level, componenent overview, if user keys in the material no, a storage location is auto-defaulted
later we found out that if the material is extended to only 1 storage location, the storage will be auto-defaulted at componenet overwview, is there any setting to prevent the auto-defaulted storage .. pls advice

Hi,
Carry out these IMG steps:
SPRO
Logistic Execution
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Set Up Storage-Location Dependent Shipping Point Determination
Assign Shipping Points According to Storage Location,,,,,,,,
Put in your combination of Shipping Conditions / Loading Group/ Plant/ Storage Location/ Proposed shipping point
Next time you create a Delivery document,, the system will pick up the above values from the Material/Customer master records and propose a Storage Location at line item number.
I just tried it and it works, let me know if this works.
Cheers,
Mohammed
Edited by: Mohammed Raheel on Jun 5, 2009 1:09 PM
Edited by: Mohammed Raheel on Jun 5, 2009 1:11 PM

Problems when creating a transfer order for moving storage units

Hi,
When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
is displayed. When i use the FM again after this message then the TO is created correctly.
When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
Does anyone have a solution for this problem?
Thx in advance.
Kind regards,
John Nijburg

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

Split transfer order on the basis of Storage Unit type(SUT)

Hi,
I got one problem and want the solution for that immediately.the problem is as follows:-
The transfer Order needs to be split by quantity according to the quantity per Storage Unit Type.
I have to do this making chages in the SAP standard user Exit EXIT_SAPLL03A_12 in the program SAPML03T.
Eg.One scenario is provided
Scenario 1: Perform transaction MIGO with a movement type 101 for Outbound Delivery 80000201. Enter a quantity of 15 kgs.
the result should be as follows:
Scenario 1: Check TOs created by going to transaction LT22. Enter Warehouse number 200; Storage type 902. Select the Dynamic Selections button and select Transfer order Item. Double click on Material and enter the material number (W075006). The SUT is 5kg so the expected result is for 3 TOs to have been created.
Means one TO got splitted in 3 TOs.
Please provide me the help.

Hi Vinay,
This can be done purely through customizing. Please check IMG -> Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data/Split. You will need to define a sorting profile for TO split in where LETYP (storage unit type) can be used as sorting condition. The sorting profile should then be assigned to defined TO split.
Hope it helps.
Have a nice weekend!

Mixing materials with different Goods Receipt date in the same Storage Unit

Hello everybody,
I´d like to know how FIFO strategy would affect to this example:
Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
Thanks in advance for your help

Hi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel

External Storage units to be entered in the Creation of Transfer Order

Hi Experts,
We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement. Now while creating the Transfer Order for this material document ,
The main issue here is that the businedd needs that if there are any number of Storage units in the Custom table say 3 SU's then the 3 SU's should be entered in the Transfer Order which is created in the bcakground using a BAPI.
please guide us how todo it
Thanks in advance

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

What is a logical storage unit in a database can anyone help me in a better

what is a logical storage unit in a database can anyone help me in a better
Thank u

Do you have something specific in your mind? Do you want to clarify something you did not understand in the documentation? If so please provide the document you are reading.
For example, a tablespace is a logical storage unit where datafiles are physical files. Did you read the concepts manual?

Default Storage Unit in LT01

Similar Messages

Maybe you are looking for