Loading all dataproviders at the same time in a template

I have a web template with 3 options in a drop down box. Each displays a chart and is based on a different query. One chart is displayed on the initial load. When one of the other options in the drop down box is selected, it takes a while to load the other chart. This is because the query on which the chart is based is run only then. Is there a way to run all the queries before the web page is rendered and then show the results?

Hi,
If I understand right, you have a single Chart webitem bound to a single Data Provider DP. DP is assigned to Query1 on initial load. On change of DropDown selection, you reset DP to Query2/Query3 using SET_DATA_PROVIDER_PARAMETERS Command. I think this should be the ideal way of having the Query run on demand rather than having each of them run at template load. But if you are ok with increased load times, you can either have 3 DPs mapped to 3Qrys instead at design time & assign the respective DP to the Chart by SET_ITEM_PARAMETERS on DropDown selection OR have 3 separate Chart webitems each assigned to its own DP at design time; keep two hidden & make them visible on DropDown selection using SET_ITEM_PARAMETERS.
Instead you can work towards improving the performance of your Queries (nothing to do with WAD) by checking on Cache/QD options/Query Variables etc.
--Priya

Similar Messages

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

On I-Mac, how can I close all tabs at the same time?

On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.

Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly

How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

IPVC-3511-MCU - Can't see all persions at the same time on conference

Hello,
I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
Does IPVC-3511-MCU support multiple conference with multiple video screen?
Regards,
John.

Hi -
This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
You did not mention the release of the 3511 software you are running. Knowing that might help too.
Ginger

Upadting all articles at the same time?

is there a way of upadting all articles at the same time? I have like 64 articles in one folio and I dont see a way of updating them in the folio builder all at once, I have to click on every article and choose update in the Folio Builder, then wait, then click on another, update and wait....

That will definitely be a relief
BTW, when I import several articles, I sometimes lose the links to internal pages inside articles ("go to page 3"). Is that a known issue?
Updating articles is the cure, but it's a pain when I have to do that 25 times...

How to load several documents at the same time (PWA 2013)

Hi
In 2010 there was an option for that:
In the document library of a project site, I want to load several documents at the same time.
How can we do that in PWA 2013 ?
Thanks

Robert,
Here is a video taht might help. if the Dragging does not work, you could also use the regular Explorer method.
https://www.youtube.com/watch?v=7n4fP3YWYI4
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

After updating firefox today to 6.0, firefox is unable to load multiple tabs at the same time. When I try, firefox refuses to load any pages, and instead is stuck trying to connect to each page.

After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.

Other solutions
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page -
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working.

Why do all documents get the same time stamp?

All files show the same creation time, 19.21, even those created today before that time. I have a new PowerBook Pro 17" running 10.6.8.

Go to System Prefs > Language & Text > Formats. In the Times section, click Customize.
Everything in the four lines at the top should be "elements" dragged from the lower section, not actual numbers.

How to display all layers at the same time?

Hi,
I have created several theme based FOIs with a checkbox to set visible them. Each theme has some data and when you click in the theme region it displays this data in an information box. But when I set visible more than one theme, can only display the information box of the last one theme that I set visible (the others are not clickable because they are under the last no?). Is there anyway to make all of them clickable at the same time?
For each theme that I create I call this function:
 function addThemeBasedFOI(value, i) {
 /* Add JDBC SQL Query theme based FOI */
 baseQuery = "SELECT value,annotation as label FROM " + value;
 var theme = "<themes><theme name='JDBC_THEME'>"
 + "<jdbc_query asis='true' spatial_column='value' jdbc_srid='4326' label_column='label' " +
 "render_style='colorScheme' datasource='DSTest'>"
 + baseQuery + "</jdbc_query></theme></themes>";
 buffertheme = new MVThemeBasedFOI('bufferthemeL_' + i, theme);
 buffertheme.addStyle(sc1);
 buffertheme.enableLabels(true);
 buffertheme.setBringToTopOnMouseOver(true);
 buffertheme.setVisible(false);
 buffertheme.setClickable(true);
 buffertheme.enableInfoWindow(true);
 buffertheme.setAutoRefresh(true);
 buffertheme.attachEventListener(MVEvent.MOUSE_CLICK, showInfoPanel);
 mapview.addThemeBasedFOI(buffertheme);
 function showInfoPanel (loc, foi){
 var width = 250;
 var height = 150;
 var html = "Name: " + foi.name + " Localization: X:" + loc.getPointX() + " Y:" + loc.getPointY() + "";
 mapview.displayInfoWindow(loc, html, width, height, "MVInfoWindowStyle4");
/* Function to set visible a layer */
function setVisible(item) {
 var themebasedfoi = mapview.getThemeBasedFOI(item.value);
 themebasedfoi.setVisible(!themebasedfoi.isVisible());
 if(themebasedfoi.isVisible()) {
 themebasedfoi.centerToTheme();
 themebasedfoi.zoomToTheme();
Thanks in advance,
Esteban.

Hi Esteban,
pls refer to these threads - they may help you with that issue:
Re: MVThemeBasedFOI Index
MapViewer and WMS layers
Dominik

Can I have the dock show up on all monitors at the same time

As the topic beckons ... is it possible to have the dock show up on all connected monitors at the same time ?
Currently I have a setup with 2 external monitors apart from the main iMac monitor. Both external monitors are connected via thunderbolt and I'm running MacOS 10.9.4.
I know I can get the dock to appear on any of the external monitors by hovering with the mouse on the secondary/tertiary monitors where the dock "should" be, after a few seconds the dock appears. However I'm looking to have the dock present at all times on all monitors, with each monitor running separate spaces, nothing mirrored or duplicated.
Thanks in advance.

If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

Two effects concurrently? all together. at the same time?

So- I'm trying to have three effects happen at once. quick Fade in- outline float - then slow fade out.
the fade in is the only thing that looks how i want it to. it fades in evenly all at once. The fade out fades from screen left to screen right. is that because I have it as a long-long slow fade? Can I make it fade all at once instead of left to right?
I'm having the text fade and after a few seconds of fadeing the outline float kicks in. so both efects are supposed to happen at the same time. am i asking too much?
I made the outline white, so I should be able to see it flow upwards. thats not the case when I import to fcp. but i do see it happen in the canvas window in live type. Is there something else I need to do in order to see this effect?

DaNam and Bogie offer solid advice.
And it's the cancel out message from Bogie that doesn't allow you to have the white outline float up.
To achieve that you need to select your text in the timeline.
In the Inspector click on the Style Tab then Outline and click the Enable box. Then change the color to white and this will allow your outline to be white in both LT and FCP.
Good luck

I recently bought a 4th generation ipod shuffle. Am I able to have both music and audio podcasts loaded on it at the same time?

I have not been able to include both music and audio podcasts on my shuffle at the same time. Is this possible with the shuffle?

I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

Apple Remote works all Computers at the same time when i don't want it too

Hi I have a Mac mini on my TV and imac and MBA on my desk if i use the apple remote for my mac mini it operates all of the machines at the same time can i stop this ?

Have you 'paired' the remote to a specific computer?
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8993.html

Process file after file / not all files at the same time

Hi There,
i have a new Problem with our XI Systems.
We process XML Files.. they come in a folder on the Server.. from there the Engine takes it and processes the message.
This works so:
In the folder /xyz/ comes a XML File... File1.xml
After 2 Minutes the XI System takes the messages and proccess it. The Engine then move the file to Folder /archive/
Another two minutes later a new file comes in to the Folder /xyz/ File2.xml
File2.xml change now data that comed with File1.xml
and two minutes later the Engine processes the message
and so on and on....
My problem is now.. when i put File1.xml and File2.xml in the Folder /xyz/ at the same time.. the Engine processes the Messages at the same time.. and inconsistencys comes into my system.
So what i want is:
I Put File1.xml and File2.xml into the same folder.. then the Engine comes and Process first File1.xml and when this finished the System proccesses File2.xml
Do you know what i mean?
Eventually someone has a solution for my question?
Thanks
Bjoern

OK. I found now in the INtegration Builder the Point as you can see in the Screenhot here:
http://img253.imageshack.us/my.php?image=58047457ux6.jpg
But my Problem is that i dont know exactly which queue i have to take..
In SXMB_ADM i found the following queues:
http://img253.imageshack.us/my.php?image=57846606uq4.jpg
And in the SXMB_MONI i see the following for messages:
http://img111.imageshack.us/my.php?image=47303569tg7.jpg
From the screenshots above, can you tell me which queue i have to take?
Or did i have to take the Queue that comes automatically when i choose EOIO?!
Thanks
Bjoern
Edited by: bjoern bayerschmidt on Dec 18, 2008 2:17 PM

Loading all dataproviders at the same time in a template

Similar Messages

Maybe you are looking for