To Create New Storage Unit Automatically

Hi all,
I need some info for creating storage bin. I have a material with 100 KG in a storage unit XYZ. And i want to move 20 KG of 100 KG to new storage unit.
First i call BAPI_GOODSMVT_CREATE with movement type 311 with new quant 20 KG to create a new storage unit. After that i call L_TO_CREATE_POSTING_CHANGE for transfer posting.
But it does no effect to material. It have 311 movement successfully but than it puts the 20 KG to the same storage unit XYZ. How can i move it to a new storage unit ?
Regards,
techmaster

If you only want to do a WM transfer (manually with LT01), you can use L_TO_CREATE_SINGLE.
Best Regards, Dirk

Similar Messages

Creating mix storage unit at id point

how can I create mix storage unit at id point. When I do gr of purchase order TO is created & confirmed automatically for id point. so I want to create mix pallet at id point. How can I create it . I checked LT09 but there only one storage unit I can enter in initial screen.

is this pallet number known into the system (is the warehouse HU managed) ?
if it is a SU managed
As per standard SAP flow the stock first comes to 902 storage type and then it goes to physical bin location.
in your case since there are 10 different material document are there 10 different TR will be there and against each TR you are supposed to create the TO now another complexity is that physically all the material is on the same SU whereas none of the TO is confirmed yet so the SU number is still in runtime. at least one TO should get confirmed so that you can use the top up logic by using the same SU
Looking at the complexity and other operational issue (during picking) I don't suggest that you should go with this approach however you are free to design the system based on your business requirement by taking into consideration of all the pros and cons of system as well as physical operation

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Authorization required for creating new Organizational units

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

the basis guy should be able to help.
at a higher level: you need to set authorizations to the roles assigned, the transaction code is pfcg.
you may create a new role with the required authorization and assign to the relevant users.
hope it helps..
regards
RH

Authorization required for creating new Organizational units in CRM

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

Hi archana,
U can Create a role through Transaction PFCG.
Just create a role and assign the tcode PPOCA_CRM if u want to give the user just only this authorization otherwise u can select the menu list from sap menu and assign this role to that user.
Another way is if that user already exist in that system then just assign that particular transaction codr with that user.
Hope it will help u
Regards
Subhash

L_TO_CREATE_SINGLE - new storage unit is not created by SAP

Hello Friends,
I am using a FM L_TO_CREATE_SINGLE to create transfer order.
But, When I am not passing Destination SU as import parameter, it gives me following error.
"Storage unit XXXXXXX is not consistent with other transfer order data"
This is happening in ECC 6.0. Earlier i was using ECC 5.0 and there was no problem.
How can I get rid out of this problem?
Regards,
RH

Hi,
Check the long text of the message.
It clearly says that
"Data in the transfer order item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered."
So check to see if the storage unit number you entered is correct.
This seems to be a data issue.
Regards,
Ankur Parab

Create new storage location

Hi all,
How do I create a new storage location.
Thanks in advance.

HI,
New Storage Location can be created by using the T.Code:OX09.
After Executing the T.Code OX09,
Give the Plant Name for which you need to create storage location.
Click on Go to New Entries, Enter S.Loc Code and Description and then save.
Number of Storage Locations created for a Plant can be seen at Table T001L.
Thnaks
Sunil.

Duplicate period appearing in German when creating new Org Unit in PPOME

Hi Guys,
My users are encountering a problem when they create an Org. Unit/Position in PPOME.
Whenever a new Org. Unit is being created (lets assume with the validity date of 01.11.2006), an earlier period would automatically be created, thus making the object having 2 periods.
Upon clicking on the "Select Period" icon for the object in the Detail area of the screen, 2 lines of periods are being displayed.
When i view the second period, i would see the correct details of the Org. Unit that was keyed in by the user.
However, when i view the first period, the details are all on German language (this record was not created by the user at all).
Therefore, i checked the tables T528B and T528T, i found duplicate records for certain Object IDs. It seems the Org Unit that was created by the user is being appended after the Org Unit that is in German.
Any ideas on how to clean up those lines of data that is appearing in German and prevent such an occurance from happening in future?
Thanks in advance

Hi Duxton,
Thanks for the reply.
I followed your instructions but i am unable to detect anything out of the ordinary.
I'm compared the configuration in Development again Production and they are the same.
However, the problem i described in this thread is not appearing in Development. It is just happening in Production.
Any other ideas?
It's not really affecting my client's business process but i would like to know what is causing it out of curiousity

Create New EIC activity automatically

Hello
we want to create EIC activity automatically when the emial is recieved by the EIC agent.
The sap standard bsp to create EIC activity is HREIC.
The controller class CL_HREIC_ACTIVITYCUCO_IMPL has method save in it.
But that uses CRM BOL entity layer.
Any idea to get the code to update or Create the EIC Activity???
Thanks
Meghana Munj

Hi EIC Expert,
I have a requirement in e-recruitment that changing navigation from Inbox to Activity.
In standard solution of Employee Interaction center creating an activity involves in the following steps.
1. Select the self service request and click on process button
2. Leads to the employee search screen, click on same as contact
3. Click on Create activity button to create activity
4. Fill in the details and save the activity.
In the current scenario steps 2, 3, are avoided and an activity has to be created automatically from step 1 to step 4.
How can I do it. Can any one describe the procedure & methodology?
Please help me on this?
If possible can you come for quick chat to venkata.praveen at gmail dot com
Regards
Venkat.

Storage Unit Date

Dear Experts
Please advice which exit / badi / enhancement can be used to derive the same / orginal storage unit date in case when we transfer stocks from one storage location to other.
when the stocks are transfered from one Sloc - WM location to other Sloc WM location, the system consumes the orginal storage unit in the source location and creates new storage unit in the destination location. due to this the ageing of the item in the destination storage bin becomes new and the system does not consider the orginal storage unit number
Can you please help me find a solution for this since the ageing report is being developed and derived from BI
Thanks

closed

Automatic determination of storage unit number while putaway

Hi all,
In my system while creating TO either i require to enter SU number by viewing MMBE/LS26
or Have to create the new storage Unit number (i.e. assighning the new number).
Is here any provision to automatically determine new storage unit number & which setting its require.

Number range once implemented then applicable to all storgae types. Please check SUT tick is active in storage type.
Check all relevant things of SU .Previously there was on thread on this subject in forum. Please check the same.
Regards,
Prashant

Creation of new handling unit management storage location

Hello
I am using transaction HU02 and create a handling unit from existing material. But i don't have any HU management storage locations in the system.
Could you please explain me how to create a HUM storage location?
Thanks,
Ilya

Hello,
I am trying to create new Handling unit, with HU02 t-code, and i am getting the following errror:
The number range object 1 does not exist
Message no. NR002
Diagnosis
The number range object was not defined.
Procedure
Maintain the specified number range object using Transaction SNRO.
I've customized number range for object LE_SSCC in SNRO.
Сould you please advise, what is my mistake?
Thx in advance

New storage location created in R3- How to push to BW?

HI Friends,
Our R3 consultants created new storage location and how should i push it BW? I checked infoobject: 0Stor_loc. But this is not in 0plant as attribute . How to load the new storage location?
Regards,
Siddhu

Hi,
Storage location infoobject (0STOR_LOC) has to bring as attribute of 0PLANT. Move this from right panel to left so hat storage location will be visible in attributes of Plant.
Sometimes you can maintain as compounding attribute also. Adjust as per your requirement.
Check this once and then load data accordingly.
Also, check the relevant data in ECC before loading to BI.
Hope this helps,
Regards,
Rama Murthy.
Edited by: Rama Murthy Pvss on Nov 26, 2009 6:33 AM

R/3 request storage unit during TO confirmation

Dear all,
I bump into an obstacle while perform TO confirmation.
During TO confirnmation, there is one screen requesting me to key in the storage unit.
I tried to put in some of the storage unit from the the search screen (i.e. the little round shape next to the field), but system don't allow.
May I know how to handle this?
Do I need to create a new storage unit and put in to this field during TO confirmation?
thanks
tuff

Dear Sinéad, and other,
Ok this is how I bump into the error (in between, my WM knowledge has not reach the Storage Unit yet).
I have created a TO for picking from a delivery order via VL02N's menu screen (i.e. movement type 601). Next, I perform a TO confirmation in LT12, and when I click the "Confirm Internally" button, R/3 jumps to this screen requesting the following two data:
1- Storage unit
<< I tried to assign some randomly existing SU unit to this field but R/3 complaint "Storage unit 00157032650003548391 does not exist Message no. L3209">>
2- Destination Storage Unit
<< I tried to assign some randomly existing SU unit to this field but R/3 complaint "Target handling unit 157032650000046104 is not assigned to TO 0000353991 Message no. L3822">>
I just don't know how to proceed now as without the confirmation there is no picking (i.e. as the actual quantity field in the LT12 screen still empty) and there is a problem on PGI later on my delivery.
Please teach me how to proceed when encounter above obstacles.
thanks
tuff

Bin to BIN transfer storage unit

Dear All,
I am moving the stock from open bin to actual bins but system is creating a new storage unit number. But when I transfer from normal bin to normal bin system keep the same SU number. My requirement is to keep the same SU number when moving from open bin to normal bin. Could you please advise how can I do this.
Regards
Sakkir

when you transfer partial quantity from a source storage unit to another bin it creates a new Storage unit number and when you transfer full quantity of a source storage unit to another bin then system retain the same storage unit number.
In your case it seems when you are transferring the stock from open to actual bin then the quantity is partial hence system is creating a new storage unit number and when you are doing actual bin to bin then you are transferring the full quantity hence system is retaining the same storage unit number

To Create New Storage Unit Automatically

Similar Messages

Maybe you are looking for