Default synchronous message response - is this possible?

I have a scenario whereby a web service triggers an IDoc. The consumer of the web service just wants to see a response message that states the message was successfully received and being processed.
Under such circumstances, is there a way to send a default message back, without using the BPM engine?

Hi,
IDoc by default are not synchronous. You can probably use Async-Sync bridge using BPM only. I dont see any other way to trigger message without BPM.
Else you might want to consider the long route of two separate interfaces without BPM. One sending the IDoc and another interface where you can use a abap proxy program to check whether the idoc is there and send a flag to XI as Yes/No and accordingly send the response to the webservice. You need to come up with some logic to identify the idoc number based on date or time etc.,
Simple way would be to just send them back the common reference number in the idoc for them to identify that it has reached ECC safely.
Regards
Krish

Similar Messages

I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

No, you can stop using the account, but you cannot delete it.

BPM restar after synchronous message error

After an error during a synchronous message (external system not avaible) into a BPM, how I can restart the BPM and re-execute the synchronous message?
By,
Sergio

Hello There,
For synchronous messages, restart is not possible.
However trace back to the BPM node in which failed sync message delivery is one of the many processes and try restarting that particular BPM node alone.
Regards,
Sridhar

TS2755 I received a message from my wife, to which I replied but the response went to her and others in her contact list. How is this possible?

I received a message from my wife, to which I replied but the response went to her and others in her contact list. How is this possible?

I have had a similar but worse issue. I sent a text with photo to 6 friends and family members. Their replies went to folks in my contacts list who were not even part of the original string. In fact, one of the replies went to someone whom I had evidently called once but was not in my contact list. This is very strange.

Synchronous message stops at inbound channel response

Hi,
We have an outstanding issue in PI where our synchronous messages stops after receiving the response from the Receiver system. This is an ABAP proxy - JDBC scenario. We already increased the ICM Keep Alive timeout from 600 to 900 seconds but still the issue persist. Also, the processing timeout is already 900 seconds. Do you know the issue why this issue is occuring? On the R/3 side, when the abap proxy is executed it is throwing an error "Error while receiving.. HTTP 402".
Regards,
Geoff
Edited by: Geoffrey Mendoza on Jun 15, 2011 7:26 PM

Hi Geoff,
The error 402 means "Payment Required".
This code is reserved for future use and does not give us a good hint.
Is it possible for you to enter more details so we may be able to point out a specific cause?
Regards,
Caio Cagnani

Selective Deletion of Synchronous Messages Possible ?

I want to delete messages for few synchronous interfaces only.I do not want to archive these
messages and also I understand that archiving of synchronos messages is possible.
I scheduled the job SAP_BC_XMB_DELETE_<client> to delete the messages but this job deletes all messages(all asynchrouns and synchromous) based on the retetnion period even though I added the required few interfaces only in SXMB_ADM in Define Interfaces for archiving.
The job SAP_BC_XMB_DELETE_<client> should not delete all messages falling in the retention period but only the messages for the interfaces which I added in SXMB_ADM.
I have gone thru many threads and SAP notes but could not find a solution to my requirement.
Is there any way to delete synchronous messages selectively ?
Your suggestion is highly appreciated.

Sorry,I made a mistake in my question .
Please read "lso I understand that archiving of synchronos messages is possible." as
"lso I understand that archiving of synchronos messages is NOT possible."

When i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me

when i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me. She obviously has a different phone number and a different provider

See here to create a new apple ID
http://support.apple.com/kb/HE37
good luck

A mate has an iphone 4 as a work phone and needs to get all data incl messages onto an old iphone 3 as he is leaving. Is this possible, any help appreciated

A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
Robbie

You won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.

What settings do I need to have on my macbook pro to access student.ashford.edu when I get the following error message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your Sy

what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.

I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao.

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Hi,
The first run of Messages will ask you to enter an Apple ID to "register' with iMessages.
If you do not do this but open the App and look in Preferences > Accounts then you will see the iMessages account and the Bonjour Account which will not be activated.
Neither of these two account can be deleted. (even if not being used)
If you then press the + icon to add you will get the choices you posted.
To iMessage you need to "register" and Apple ID with the iMessages service.
As Diane then points out you can link this to your iPhone number.
This "syncs" (Displays on all devices) the various iMessages sent to either iPhone or Apple ID
You can then chose on both iPhone or Mac version how or which ID/Number is going to be used to "Start the conversations from"
I have my Mac version set to start from my Apple ID and the iPhone from it's number.
At this moment the Mac version cannot send SMS text messages to an iPhone.
This is apparently coming with iOS 8 and OS 10.10 (Yosemite)
An AIM account can send SMS Messages but only to a limited number of USA based phone users on these carriers.
(Basically you add a phone number with country code +1 as a Buddy to your List)
Mocked up number (It not really an auto responder although you do get sent back and Error message about it not being valid)
8:37 pm Sunday; July 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Would like each new site / link to open in tab as default. is this possible please?

I would like each new web site or link to open in a new tag as default rather than right click and 'open in new tab'. is this possible please?

No built-in function to '''''automatically''''' do that, but you can:
*right-click link or bookmark and choose Open in New Tab
*middle-click link or bookmark (middle-click = press the mouse scroll wheel
*CTRL+left click link or bookmark
NOTE: Options => Tabs => 'open new windows in a new tab' works only '''''when coding on a web page''''' would otherwise open a link in a new window.
Add-ons (set options after install: Add-ons > Extensions, click Add-on by name, click Options):
*https://addons.mozilla.org/en-US/firefox/addon/tab-utilities-lite/
*https://addons.mozilla.org/en-US/firefox/addon/tab-utilities/
*https://addons.mozilla.org/en-US/firefox/addon/tab-mix-plus/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Hi, i wanted to resize my windows partion. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partion from the backup. Is this possible?

hi,
i wanted to resize my windows partition. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partition from the backup. Is this possible?

I see youhave gotten recommendatons for using WinClone or CampTune. I have used both and they both work well.
You have asked about using the WIndows 7 utility to backup your drive and restor it onto a larger partition. I will tell you fro experience that this will probably not do what you want, and may do something that you don't want. You can use the Windows 7 native backup tool to make a backup of your Windows 7 partition. It will most liekly end-up making a dive image of the whole drive. When yourestore that backup, it will try to re-create teh partitions of exactly the same size as they were when the backup was taken, so it won't increase your partition size for you. Worse, since Windows doesn't natively know how to read./write HFS+ volumes, the backup will make a partition for your MacOS (replacing any you may have now), except that the copy restored by WIndows will be totally worthless, and you will not be able to boot MacOS from it, or even read it under MacOS.
Now I will tell you that I've also had some fairly good success working with the free tool CloneZilla. Since it hasn't been mentioned yet, and everything else mentioned does cost you money, I thought I would throw it out. CloneZilla is not as easy to use as the tools mentioned, but it has worked for me int hte past, so it is something to consider. I tend to use CampTune myself, but that was because I purchased a bundle deal for them and it was included in that deal.

HT5622 my friend believes her phone has been hacked as her ex partner has read all her messages from people for the last week how is this possible?

my friend has an iphone 4 and believes her messages on her phone have been hacked as and ex boyfriend has contacted her telling her who she has spoken to and read the message she has for the past week, is this possible and how can she stop this?
Thanks

You're welcome.
Ask her if they shared an Apple ID to download iTunes Store content such as apps and music?
If not, he knows the password for her Apple ID email address.
She can create a new Apple ID with this link.
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleIdForIK B?localang=en_US&path=
She needs to create a new email address first as well.
Tell her not to use any security questions that her ex knows or may know.
After she has created a new Apple ID, on her iPhone go to Settings > Messages > Send & Receive > Apple ID.
Select the Apple ID and at the menu window that appears, select Sign Out.
She signs back in at the same location with her new Apple ID to register her iPhone phone number with her new Apple ID and this will prevent her ex from having access to all iMessages that she sends and receives.

When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.

when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?

I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?

If the text is still on the phone and wasn't deleted, I don't see why not. Probably easiest to use an app like TouchCopy (Mac and PC) or PhoneView (Mac), rather than looking through things on the phone itself.

Default synchronous message response - is this possible?

Similar Messages

Maybe you are looking for