Multiple OBIEE installations on Linux

Are there any issues or gotchas to installing multiple full OBIEE infrastructures (specifically, OAS 10.1.3.3.0 and OBIEE 10.1.3.4.0) on a RH Linux box? I want to have two separate stacks present, one acting as Dev and one as UAT on the same hardware, if possible. Is this even possible? How adaptive are the various components (OAS, OBIEE) to port selection when the default ports are already in use? And if it can be "done" then should it be done with the second install done within a separate shell account / owner, or can I simply install additional ORACLE_HOMES (and ORACLEBI_HOMEs and ORACLEBIDATA_HOMEs...) under the same shell account?

Bob,
there're no issues to what you're trying to accomplish - just make sure the port #s are different (bi server and presentation services)...
I'd suggest a different account for simplicity sake - but you should be fine with different homes
Do you have a copy of a deployment guide?
Also check this thread
Re: Selecting a repository when multiple repositories are available

Similar Messages

  • How can I validate OBIEE installation on Linux server?

    I am at a new site where I am trying to validate an OBIEE 10.1.3.3 (Linux) installation done by a third party (which has left without providing even a hint of any documentation).
    In the linux box, I can see all the files installed and the proper directories created. Can you please tell me how to verify if the installation is indeed proper? For example, I would like to log on to the OBIEE portal to see if I can log in and create an Answer (I assume the paint.rpd will be the default repository). Can you tell me what are the default port numbers? e.g what would this URL be http://hostname:port/analytics
    where hostname = oracletest.myclient.com.
    Thanks a lot!
    KMora

    If you go to the OracleBI/setup directory there are a number of scripts you can use to stop and start services:
    ./run-sa.sh start
    ./run-sa.sh stop
    Will stop and start the BI Server (log file OracleBI/server/Log/NQServer.log)
    ./run-saw.sh start
    ./run-saw.sh stop
    Will stop and start the Presentation Sever (log directory OracleBIData/web/log/)
    The port for the URL will depend on whether the default OC4J server was used, or an existing one, as the previous post says 9704 is the port for the default, the port for an existing one could be anything, try 7777. The OC4J server will also have to be running - this be be done with the ./oc4j -start command for the default one, and probably using opmnctl for an existing one.
    If you find the Configuration and Installation Guide all the port numbers are listed there.
    Jon

  • How To Install Multiple OBIEE Instances On One Linux Machine

    Hi,
    OS: Red Hat ES 5.2
    OBIEE : 10.1.3.4
    We one development server(Linux) where one OBIEE 10.1.3.4 was installed with os user as 'ora1a' (Deployed on Oracle Application Server 10.1.3.4)
    and now I have installed OBIEE 10.1.3.4 on same Linux Server with different user(ora2b) and different mount point (Deployed on Another Oracle Application Server 10.1.3.4 )
    But My OBIEE was not working and I came to know that only one can be working by default.
    After following few notes i have update NQSConfig.inc and odbc.ini with different ports ie from 9704 to 9725 and bounced BI server and presentation server
    But still its not working can any one tell me what are all needs to update to make it work
    Thanks in advance
    Regards,
    Bhanu Chander
    Reference's i used: HOW TO: Install Multiple OBIEE Instances On One UNIX Machine          (Doc ID 605582.1)

    Hi
    I was not much clear about what you are telling
    See my first OBIEE instance URL is http://hostname18.oracle.com:7777/analytics (As i deployed OBIEE on Application server 10g(OAS1))
    and second one is http://hostname18.oracle.com:7778/analytics (As i deployed OBIEE on another Application server 10g(OAS2))
    Also My port for first OBIEE instance is 9704 and second one is 9725(Which i changed to this)
    Now tell me what are all i should update
    Thanks,
    Bhanu Chander

  • OBIEE 11g upgrade wizard & installation on linux 64bit

    Hi,
    Is it that on Linux 64 bit machine, i should install OBIEE 11g in "Software Only" mode, only then upgrade wizard works correctly, if i need to do "Software Only" should i be installing weblogic server independently? or at high level what are steps to be followed.
    Thanks,
    Sree

    Hi Sree,
    What you are mentioning here is relevant for Windows 64 bits environment where you have to install the software only after installing web logic standalone.
    The installer for Linux 64bit will install all the components for you except of course the RCU that you need to downlaod and install first.
    Please refer to this link for more details about the installation
    http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
    NB: Devlopement tools (Admin tool or catalog manager..) don't exisit for Linux, so you have to use windows for development
    Regards
    Adil
    PS: Please don't forget to close the thread and assign points when your question is answered

  • Starting OBIEE 11g on Linux 64 bit

    Hi,
    I installed OBIEE 11g on Linux 64 bit and it worked fine after installation. I rebooted the system and I need to start it again.
    I am trying to run
    run-sa.sh
    run-saw.sh
    etc.
    but it looks like the scripts are broken:
    ./run-saw.sh: line 43: syntax error near unexpected token `('
    ./run-saw.sh: line 43: `ANA_INSTALL_DIR=$N($P(installLocation))'
    it looks like these scripts were not processed by the installer during installation, $N($P(installLocation)) should have been replaced by the installer with actual paths I assume.
    is there another way to start OBIEE?
    Thanks,
    Calin

    Are you sure you are running OBIEE 11g? YOu are meant to use those scripts any more in 11g. See this post:
    Startup Scripts for OBIEE 11g on Linux

  • Sharing reports across different OBIEE installations

    Hello,
    Is there a way to import/export reports from/to different OBIEE environments?
    We developed a number of Answers reports, and would love to share them with our counterparts who have their own OBIEE installations. The problem is that our environments differ and our repositories differ as well (.rpd file). Some of us are running Windows, others are running Linux; some use Oracle, others SQL Server, or even Microsoft Access.
    We tried copying the xml and corresponding .atr files from the catalog in one environment to the catalog in the other, but we quickly found out that the reports fail due to different configurations (missing tables, unknown users, problems with permissions, etc.)
    Any help or ideas will be greatly appreciated.
    Thank you very much.
    -sb

    Hello,
    Thank you for your response.
    I am replying to my own original post now. You are right, I was asking for the impossible -- it was late on Friday, and I must have been really tired when I submitted my original post.
    The problem I needed to solve was this. Someone gave me Microsoft Access database, the .rpd file and the .xml and .atr files for the Answers reports. My job was to make those reports run in my environment, which is Oracle on Linux. I have finally made it work, but I did have to make changes in the .rpd and add a TNS entry before this started to work. Since there was a change in the physical layer, I had to recreate the BM layer to generate the correct mappings. Then I was able to simply copy and paste the presentation layer from the .rpd that was given to me.
    Again, thank you very much for your response.
    -sb

  • OBIEE, OBIA on Linux

    I am new to OBI and hence need advice on the architecture:
    I have 2 solutions: I have 3 Linux servers for the OBIEE + OBIA installation: All linux servers are 2 CPU, 8GB VMs. Which solution is better?
    Solution A:
    Server 1: for database. This DB will host OBIEE MEtadata + Informatica Repository + DAC Repository
    Server 2: for Infomratica + DAC Servers
    Server 3: OBIEE related components + OBIA
    On Windows 7 desktop, I will install Informatica + DAC Client.
    Solution B:
    Server 1: for database. This DB will host OBIEE MEtadata + Informatica Repository + DAC Repository. Also Informatica + DAC Servers
    Server 2 & 3: OBIEE related components + OBIA

    It depends of your needs.
    What I can say is that you need minimum a windows machine if you check the typical topologie.
    http://download.oracle.com/docs/cd/E14847_01/bia.796/e14843/windows_ic.htm#BABCDDGD
    Cheers
    Nico

  • Multiple Windows installations on Bootcamp

    I am presently running Windows XP via Bootcamp on my 13" MBP. I'm considering a change to Win 7 but didn't want to just dump XP and replace it with 7. Is there a way to setup multiple Windows (or even Linux) installations and have them all selectable on startup instead of just having the present choice of OSX or Windows?

    Mac and MBR doesn't support 3 unique partitons.
    Windows will have its own dual boot menu. OS X won't see all three.
    You generally always have Windows boot menu when you have more than one partition.
    Mac EFI boot manager in this case, by shrinking Windows, you won't.
    Boot Camp doesn't support triple boot, but there are people that have.
    Just search for Triple-boot on forum or Google or check Ubuntu forum and guides.
    Virtual machines are always a lot easier, whether under Mac or under Windows. I doubt you'll really find you need XP in the end.
    The normal method is to shink what you have, assuming it is large enough, to create a sub-partition in XP to hold Windows 7.
    http://www.techspot.com/guides/143-dual-boot-windows7/
    Normal structure is the GPT, Mac OS X, MBR, Windows, plus EFI partition(s) at the end of each user volume.
    Backup, experiment, and proceed. But be ready to restore your hard drive partitions.

  • OBIEE Installation doc's and integration with EBS 12.0.6.

    HI,
    I had installed OAS 10g with OSS and OID and integration with EBS R12.0.6.
    Now I want to install OBIEE(On Linux) and wants to iuntegrate with SSO.
    Please provide me the Master Doc for this and anyother private doc also if any.
    thx

    Hi,
    Check this might be helpful... http://gerardnico.com/wiki/dat/obiee/linux_installation
    http://onlineappsdba.com/index.php/2007/10/29/biee-installation-on-linux-business-intelligence-enterprise-edition/
    To integrate with EBS check these.....http://it.toolbox.com/blogs/eye-on-obi/oracle-bi-applications-obiee-security-integration-with-oracle-ebusiness-suite-17246
    http://obibb.wordpress.com/2010/07/30/integrating-oracle-ebs-and-oracle-bi-ee-part-i/
    Thanks,
    Srikanth

  • Problem on installation of linux through the vmware software on compaq CQ60

    Problem on installation of linux through the vmware software on xp operating system. My laptop is Compac CQ60.
    The error message is no device found compatable for the installation.

    user12190571 wrote:
    The error message is no device found compatable for the installation.The question after this kind of information is usually : What is the exact error you got, from who and when you were doing what.

  • Multiple BAM installations on the same machine?

    Hi guys,
    I have a customer with the following requirement:
    "We have installed BAM 10.1.3.3 with EL and upgraded to 10.1.3.4. It is currently using a remote database 10.2.0.3 in our test envt. We want to use the same Windows server for monitoring our Development enviroment also using the Dev database. Is it feasible or will it corrupt the IIS of the windows machine already running BAM 10.1.3.4. Please provide your recommendations on this, whether to have separate windows servers or we can have multiple BAM installations on same server."
    Any ideas on this?
    Thanks in advance,
    Catalin
    Oracle Support Services

    Multiple BAM 10g installations on the same box is not supported.

  • Oracle Errors while Solution Manager 4.0 installation on linux

    While installing Oracle 10g instance for Solution Manager 4.0, The following popup message displayed. I checked the log file and not much information. Please tell me what shall I need to do.
    Error message:
    Error in invoking target 'ntcontab.o' of make file '/oracle/<sid>/102_32/network/lib/ins_net_client.mk'
    see '/oracle/orainventory/logs/installActions2006-10-08_06-39-02PM.log' for details
    Thanks in advance
    Regards
    Srinivas

    Hello, have some one solved the problem ? I have the same problem on SLES9. I have fond note #499055. There are something about relinking files during Oracle installation on Linux. Please give an information did You soled a problem.
    Best Regards
    Marcin Sobolewski

  • SAP BI 4.0 Installation on Linux Machines

    Hi,
    Can some body send me the document or Detailed steps regarding how to install the SAP BI 4.0 software on the Linux machines.also let me know what are the pre-requisites for this installation.
    This software needs to be installed in both Server and Clinets as well.
    Kindly consider it as a bit urgent and send me the details.
    Thanking you in Advance,
    Warm Regards,
    Naga Nanda Kishore.     

    Hi Nanda,
    Please refer the below link for SAP BI 4.0 Installation on Linux Machines.
    Linux System Landscape Overview
    Link:
    http://wiki.scn.sap.com/wiki/display/BOBJ/Linux+System+Landscape+Overview
    Linux Pattern Prerequisites
    Link:
    http://wiki.scn.sap.com/wiki/display/BOBJ/Linux+Pattern+Prerequisites
    Business Objects Installation:
    (a) Setting up BI platform server 1
    (b) Setting up BI platform server 2
    (c) Changing the Linux Pattern Cluster Name
    Link:
    http://wiki.scn.sap.com/wiki/display/BOBJ/Setting+up+BI+platform+server+1?original_fqdn=wiki.sdn.sap.com
    Regards,
    Daya Jha

  • Cannot find the installer"server/Linux 64/DisK.. Erron on Informatica 8.6.1

    Hi Friends,
    I am trying to install Power Centre Informatica 8.6.1 (64 bit) on RHEL 5.4 (64 bit) and while invoking the installer i am getting the following error:
    cannot find the installer "server/Linux 64/Disk1/Instdata/VM/install.bin
    Please let me know the fix.
    Regards,
    DB

    Hi,
    This is the data mining forum so we don't have anything to offer for Informatica installation issues.
    I am not sure what forum to recommend given Informatica is not an Oracle product.
    You could try the data base general forum:
    General Database Discussions
    Thanks, Mark

  • Issue with multiple application installation and server share

    Hi,
    SCCM 2007 SP2 R3 ICP2
    All servers W2K8R2
    I am having an issue with software installs.  When using a variable for multiple applciation installs, I get access errors when the applications go to install.  It appears to be a multiple connection issue, but I can't figure out why.
    I am using server shares for my DPs.  The proper permissions are set.  The servers (DP) are W2K8R2.  I think it has to do with the way R2 handles the conenctions.  I want to know if this is a known issue or if anyone has come accross
    it.
    I am going to post in the software distribution forum as well, but thought this would be a config question.

    Hi! I'm waking up this dead thread but I've got a *very* similar problem!
    I've got a SCCM 2007 SP2 R3 installation on Win2008.  All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got  three DPs in the same site-boundary as the
    CM-server itself.)
    Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
    but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
    I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
    the same Task-sequence with the Multiple Package installation step
    works fine in our site-boundary where the ConfigMgr-server is installed.
    Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
    <![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"><br/><![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"><br/><![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"><br/><![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"><br/><![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"><br/><![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"><br/><![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"><br/><![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"><br/><![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"><br/><![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"><br/><![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"><br/><![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"><br/><![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"><br/><![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"><br/><![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"><br/><![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"><br/><![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"><br/><![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"><br/><![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"><br/><![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"><br/><![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4<br/>CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15<br/>CCMClientTimestamp: 2011-12-12T22:02:17Z<br/>CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg><br/>]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"><br/><![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443  CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"><br/><![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"><br/><![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"><br/><![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"><br/><![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"><br/><![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"><br/><![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
    <br/><br/><![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
    <![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
    <![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
    <![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
    <![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
    <![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
    <![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
    <![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
    <![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
    <![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
    <![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
    While installing a single package from the same DP (VAXCMDP01) looks like this:
    ![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
    <![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
    <![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
    <![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
    <![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
    <![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
    <![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
    <![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
    <![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
    <![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
    <![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
    <![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
    <![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
    <![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
    <![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
    <![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
    <![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
    <![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
    <![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
    <![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
     Notice that it never checks for DPs in the same way as the multiple package install:
    <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
    I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
    The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
    Any ideas?
    Kind regards,
    Mathias

Maybe you are looking for

  • Convert sql select statement to oracle

    Hi All, Can anyone help me converting this Sql select statement to oracle .... -----------------------------------------Query-------------------------------------------------------------- select emp_master.emp_code , emp_master.dept_cd , attendance_m

  • How to make data in Essbase cube equal to data in DW when drilling through

    Is there standard ways in Oracle BI + Essbase to make data in Essbase cube and DW equal (corresponding)? For example when we are drilling down from cube to DW in this moment in DW may be loaded additional data (new data) which are not loaded in the c

  • IPad line-out design flaw - really!!!

    I just bought a cable that uses the line out of the ipad to use with my car stereo (Kensington 2-in-1 Charger and Audio Cable for iPhone/iPod) I first tested the cable by plugging it into some external computer speaker ... hissssss. Then into my nice

  • Editing PDFs w/embedded fonts

    I make pdfs w/the fonts 100% embeded (not subset), and i use dummy type where i want others to be able to fill in, example phone and address so in my pdf the type is 000-000-000 Address Line 1 City, ST 00000 I can go into the pdf and change the type

  • Usage of EO/EOIO and BE

    I know there are limitation in using EO, EOIO and BE for cross apps and adapters.. do u have a list what are these limitation for Adapters/Corss application wise. For an example, EO can't used is IDOC's thanks-GS