Default Time Stamp in PO

Since we upgraded from 11.5.9 to 12.0.6 we are getting a receiving tolerance message that I believe is tied to the time stamp. Say a Need By date is
30-JUN-2010 00:00:00 When the receiving folks perform the receive transaction and say it is 30-JUN-2010 13:07:00 the receipt tolerance message for Days Early or Late pops. They tell me this didn't happen before in 11.5.9. Thoughts of getting around this? In their minds the transaction is on time because it is in the same calendar day. I don't believe it is an acceptable option to put the tolerance at one day late.
Thanks in advance

There is a profile PO: Default Need-By that we will utilize

Similar Messages

Customizing Time Stamp In Receiver File Adapter

Hi,
I am working in a XI to file adapter scenario.
The default time stamp in receiver file adapter is yyyyMMdd-HHmmss-SSS.
I want to time stamp as "ABC_MM_DD_YYYY_HH_MM_SS".
i searched SDN,but not getting an end to end approach.
Like...I developed a UDF ,but when I map it to receiver root node..I am getting error.
Please help.
Just request for a step by step procedure.
Also,ASMA is not v clear to me......
Plzzzzzzzzzzzz help!!
Regards.

Hi sriparna,
The timestamp used by the File Receiver Adapter is a default pattern, to achieve that you have to use a UDF in the middle of the MM and set the receiver file name with the ASMA, read this for further information:
´´´´ Dynamic Configuration vs Variable Substitution - The Ultimate Battle for the File Name
/people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
It really helps,
regards,
Juan.

Time stamp information in default trace file

How to check the time stamp in defaulttrace.trc or application.trc files for logs in XI server.
I have seen following timestamp in above mentioned trace files. But seem to me, during the shutdown time of server, system put the timestamp in trace file.
ERROR       gateway shutdown
TIME        Fri Jun 20 11:01:08 2008
Except for shutdown time, how the system put the timestamp for other activity of system in the default trace and application trace file??
Sometime, i need to check the timestamp to get some specific information in default trace file for some system activities.
is timestamp mentioned in coded form as per following log:
#1.#36CC34C00F02009B000001B400001FF40004510B33EAB6D3#1215008464352#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCDefaultRequestHand
ler.handleRequest()#J2EE_GUEST#0##XQA#SAPSYS                          #4869A1FC78690A8DE10000000A2C0AC7#SAPEngine_Application_Thread[impl:3]_51##0#0#Error##P
lain###java.lang.reflect.InvocationTargetException#
#1.#36CC34C00F02009B000001B500001FF40004510B33EAB76C#1215008464352#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCDefaultRequestHand
ler.handleRequest()#J2EE_GUEST#0##XQA#SAPSYS                          #4869A1FC78690A8DE10000000A2C0AC7#SAPEngine_Application_Thread[impl:3]_51##0#0#Error##P
lain###java.lang.reflect.InvocationTargetException
Thanks
Amar

Hi Amarjit
The timestamp is noted in unix epoch time (java does use this as well). It is this field:
#1.#36CC34C00F02009B000001B400001FF40004510B33EAB6D3# 1215008464352 #com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCDefaultRequestHand
ler.handleRequest()#J2EE_GUEST#0##XQA#SAPSYS
The first 10 digits are seconds since epoch. The last 3 digits are milisecondes. Converted in human readable format: 07/02/2008 16:21:04.352
[Unix Time|http://en.wikipedia.org/wiki/Unix_time]
Damn, i remeber having answered this already here in the forums, but i cannot find the thread anymore myself :-(((
Best regards
Michael

Date and time stamp for the file

Hi Experts,
My Requirement is to create a csv file with the name testfile_date&timestamp.
If i select add time stamp in the receiver file communication channel the file be as testfile_yyyymmdd_hhmmss_XXX.
The XXX is message id which comes by default by selecting add timestamp option.
but, i don't want the message id displayed in the file name.As i know from the blogs we can reach this requirement as per Michels blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
I am not clear in the mapping. after writing the udf, to which filed i need to map with that udf.
can you please tell me stel by step how how to do mapping and how to achieve the requirement. request you to send the code forthe udf.
Thanks
Rahul

Hi,
you can wirte udf and map it to root element of the target message type. u just need to execute the udf.
UDF:
// UDF havs one input parameter - timestamp
Code:
DynamicConfiguration conf = (DynamicConfiguration) container .getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String OldFileName = conf.get(key);
String newFileName = "";
if (OldFileName != null) {
newFileName = "testfile_" +timestamp ;
conf.put(key, newFileName);
return newFileName;
Mapping:
Date (standard function) [Formmat yyyyMMdd_hhmmss] -> UDF -> MesageType.
Thanks.
Ritu

Can't show 7PM with Time Stamp Control

Maybe it's just me, but I can't seem to get any time stamp controls to accept 7PM as an entry.
....this is kind of a problem for the data entry I'm supposed to be doing this weekend.
Any workaround?
Patrick Allen

Thanks for the reply Guenter.
It's very strange. Even after shutting down LabVIEW and starting with an entirely new VI, the time stamp control always displays 00:00:00 when I try to enter 7PM.
I've tried changing the defaults to just about everything. But it's always the same behavior.
For my work around I decided to just use Excel for all my raw data entry. I'll write program to stuff it all in the database later.
*edit*
I just downloaded the attachment on your reply.....and it worked just fine.
I'm uploading the entire .vi now. This is bizare.
Message Edited by pallen on 10-03-2009 05:44 PM
Patrick Allen
Attachments:
time stamp weirdness.vi ‏6 KB

HCM Process & Forms: Date & Time Stamp issue in Prev Comments Box

Hi
We implemented HCM Process and Forms and we are in EHP4. We need user name, date and time stamp in each step for audit purpose.
Form Process Example:
Step1: Manager -> Initiates a Form for employee pay/position changes (REQUEST)
Step2: 1-Up Manager -> Approves a Form for employee pay/position changes (APPROVE)
Step3: HR Admin -> Process a Form for employee pay/position changes (PROCESS)
Process Overview: HR Admin can open a form once all steps are completed and they want to see all 3 steps date & stamp here.
New Comments -> To enter user comments in each step. Used data type HRASR_CURRENT_NOTE
Previous Comments-> To display prev. step / user's comments including user name, date & time. Used data type HRASR_PREVIOUS_NOTES.
I tried all different property settings in the form. May be I am still missing some property settings here.
Issue: If user enters any comments in "New Comments" box then only date & time stamp is coming along with their comments in "Previous Comments" otherwise not showing anything, just blank in the Prev. Comments. I added some code in form script in case no data in "New Comments" then default a value ":" . It is working fine for first step but not working the same for other 2 steps.
Trying in different way:
Creating 3 text fields in a form just for display purpose and modifying each field (data set) with some text (combination of user name, system date and time) at each stage/step in a BADI.
Method: IF_HRASR00GEN_SERVICE~DO_OPERATIONS
Here it is updating correctly for first step/stage (REQUEST) and other 2 fields are not updating accordingly. I did debug for each step and updating the data set correctly but finally not dispalying the valuse in a form except first field.
Can someone please share your ideas or inputs.
Appreciate your time & help!
Thanks
Hari

Hi Sahir
Thank you for your reply.
As I explained in my post, user details with date & stamp are coming when user enters some comments otherwise it is blank., All users may not enter comments because it is not a "required".
HR is needed this for audit purpose, just at end of the process they need to see all user names, date & stamp in the form. Forget about comment boxes, Can't we make just simple text fields with user details for each step (all 3 stages)?
FYI:
Issue: If user enters any comments in "New Comments" box then only date & time stamp is coming along with their comments in "Previous Comments" otherwise not showing anything, just blank in the Prev. Comments. I added some code in form script in case no data in "New Comments" then default a value ":" . It is working fine for first step but not working the same for other 2 steps.
Appreciate your inputs !
Thanks
Hari

Error when converting time stamp in date time time zone CST in IC

Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
Teja

Hi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon.

Time stamp to excel sheet

I want to print time stamp every second to an excel sheet, tried 1000 of times to add row to the sheet but failed, any clue how to?
Attachments:
time stamp in a row.vi ‏67 KB

That's because you're wiring the N value of the for-loop to the "column" element of the cell cluster, and you are wiring a constant of 1 to the "row" element of the cluster. You also have several issues with the code:
Do NOT hard-code a path the way you are doing. What will happen if someone else tries to run this code? What will happen if it runs on another computer that has Windows XP? Use a control and set it to a default value if you want.
No error handling whatsoever.
Do not use integer constants in lieu of enumerations. The VIs you are calling have parameters for which enumerations are provided. Use them. Right-click on the inputs and select Create->Constant. This will create the enumerations for you. They are self-documenting.
Do not have a time delay that cannot be bypassed if there is an error. You are running the loop 500 times. What will happen if there's an error on iteration 20? The loop still has to run 480 times, forcing you to wait 480 seconds before you can stop.
Be aware that timestamps between LabVIEW and Excel are different, since they use different epochs. This has been discussed ad nauseam in these forums, so do a search and you will find out how to deal with this.
See attached modification as a starting point. You should also review the LabVIEW training materials. To learn more about LabVIEW it is recommended that you go through the introduction material, tutorial(s), and other material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. There are also several Technical Resources. You can also take the online courses for free.
Attachments:
time stamp in a row MOD.vi ‏79 KB

5800 does not retain date&time stamp for SMS trans...

I just got a new 5800XM a week ago. I upgraded from a Samsung SGH-C260. When I tried to copy the SMS messages off my SIM and on to the Nokia, all the date and time information of the original messages was lost. I tried the SIM in a new Samsung Star and it was able to read the date and time information without trouble, so obviously the information is there and readable.
Does anyone know of a way to successfully transfer these SMS messages without losing the date and time information?
Thanks!

Paresh - my understanding of the original post is that when she does show startup-config that no date is there. There is an explanation for this.
Narayan - the service timestamps is a good command and I agree that specifying datetime is better than the default of displaying uptime. But this command does not have anything to do with the date in the config file.
What does control the presence (or absence in this case) is whether the router has authoritative time at the time the config was changed or saved. The router can have authoritative time by use of the clock set command or by use of NTP. I believe that NTP is a much better solution.
So if the router really knows correct time it will put the time stamp into the config. And if the router does not know correct time it will supress the time stamp. From the fact that the startup config does not have a time stamp we can believe that the router did not know authoritative time when the config was saved. And I do not know any good way to go back and discover it.
HTH
Rick

Format Time Stamp String for excel error

Hi all,
I am currently trying to format the time stamp from labview to excel, in an excel recognizable format. Ive attached a photo of that part of the vi. The time stamp is formated correctly when it leaves the format time stamp block and after it leaves the build array block, but when it is written to excel file it is formated in what looks like a standard format and excel does not recognize this as a time stamp.
Any ideas to fix the issue?
Thanks
Attachments:
Time stamp.PNG ‏7 KB

The Example Finder has a few ActiveX examples I think one uses Excel.
Also if you have the Report Generation Toolkit I think this is what you need
http://digital.ni.com/public.nsf/allkb/38D7104644E0F7A5862578B1001A86C5
It sets the cell format to be how you want. The default for a timestamp is "m/d/yyyy h:mm".
BUT I just think I have an easier solution. The problem is it correctly detects that this is a time stamp, but the cell format is incorrect. If we convince it that it is a string it will look right and I assume that's all that matters. So add a space to the front of your time, so have the format be " %Y-%m-%d %H:%M:%S" (notice the space) and I think it will look the way you want because Excel thinks it is a string.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Question on Time Stamp

Hi Gurus,
I have a question. When we select the date range for Date filter we see the Time Stamp as 12:00 AM beside the Date. Is there a way to turn off this Time Stamp to not to show.
Thank You

hi,
check this:
http://oraclebizint.wordpress.com/2007/12/19/oracle-bi-ee-101332-dates-dates-and-dates/
above article tells how to preserve deserved date format to prompts.
Save as system-wide default to particular column only not for all columns which are having same data type..
If you want to change this date format of this particular column in any report you can simply mention data type in column properties, but don't save format at this moment...

What logs are effected by "Ignore Time Stamp in Client Messages " rule?

Hello,
We're considering whether we can set "Ignore Time Stamp in Client Messages" system rule to false.
Now we're implementing 2 functionality and use them at the same time.
One is to change equipment status immediately and log the record to RESOURCE_TIME_LOG table.
The other is to log equipment status change reason code. That's recorded into PRODUCTION_COMMENT table.
We already find "Ignore Time Stamp in Client Messages" system rule. It's explained in HELP site like following and plan to set it to false.
=====
true: Ignores time stamps from the client during validations for starts, completes, nonconformances, and parametric data. Use this rule in cases such as when the client clock does not match the rest of the system (the client clock is "out of synch").
false (default): Uses time stamps during validations
Can override at: site, resource
=======
However, we're a little confused becasue above help says the default value is false and the default value in our customer's ME is true. When we try with the rule as true, these time stamps are sometimes different. (I guess the reason, these tables can't handle smaller time than 1 second.)
Which ME tables will be effected if we set "Ignore Time Stamp in Client Messages" to false?
As I mentioned, we'd like to set equal time stamp into There're RESOURCE_TIME_LOG and PRODUCTION_COMMENT.
In the other hand, we concern the rule may make bad effect with other functionality and/or tables (e.g. PRODUCTION_LOG, ACTIVITY_LOG , and so on).
Best Regards,
Takahiro Uesugi

Takahiro,
From the beginning the system rule was introduced with default value of Fasle which was described in the online help. However, later the customers started using XML Production Interface more intensively which caused the problem of data inconsistency due to abuse of timestamp fields and sending messages with delays and not in chronological order. The solution in that case was to switch the rule on. And sicne that time the default value has been changed to True.
So, the system rule should control timestamp fields of XML Production requests where the actual time of activity execution is specified
Regards,
Sergiy.

Document Properties time stamp

Post Author: Hieu
CA Forum: crystalreports.com
The time stamp in Document Properties (such as this one "07-08-08 17:04:50.338") is based on Eastern Time Zone. Is it possible to change this to reflect my local date/time as seen on the bottom of the Crystal Reports XI application? We are in Hawaii, and we don't observe daylight savings. Therefore, our users must remember to calculate a difference of 5 hour or 6 hours depending on Fall/Winter or Spring/Summer, respectively. Quite tedious.
Also, can you change the 4-digit year instead of only the last 2 digits? When viewers see xx-xx-xx, they tend to first think mm,dd,yy which is not correct. Thanks.

Post Author: Henry
CA Forum: crystalreports.com
Thanks for your suggestions. We may provide features for end users to set the default timezone and date format in future releases.

Default calender stamp in infoview ( webi/deki)

I am facing a problem related to date formats when picked from calender. I have noticed this in almost all ful client reports viewed through infoview. I am using a date object in the prompt, this object is set as mm/dd/yyyy format in the universe. When the user enters a date in the prompt field, it works fine, BUT when the user chooses a date from the calender, it appends time stamp with the date. Even though the report works, but the timestamp then appears on my report cells.
How can the calender's default format be changed?
I checked the prm file and updated and even though its not working
BO XIR2 SP5
Websphere
DB2
Windows

Kamal,
As Soni pointed out, there is really no way to modify the code behind the Java panel since it is a pre-built Java applet that is downloaded and run within InfoView.
There are a few settings that you can change within the applet, but most of them are only cosmetic changes, nothing functionality-wise. You can take a look at the config file for the applet located at "D:\BusinessObjects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\webiApplet\AppletConfig\defaultConfig.xml", but again, it would not really let you modify the date format that you are looking for.
I wonder why you are looking to do that - what is the date format in your database? Does it match with the one you intend to use?
Cheers,
Sarang

Number to time stamp function: criptic help

Your help is VERY misleading.... it costed me hours...
If you say that the time stamp is "time-zone-independent number of seconds that have elapsed since 12:00 a.m., Friday, January 1, 1904, Universal Time" you should display it as it is or *please* say that the time stamp is calculated in UTC time but displayed in local time.
In fact, if I want to convert 3600, I would expect to see 1:00 am 1/1/1904, but I see 6:00 pm 12/31/1903, because I am in Colorado....
By the way... it is wrong anyway, because there is now Daylight Savings time, which puts CO at UTC-6, not UTC-7..... Why don't you just have it display UTC time and we can all figure out where we live??

Did I say something like that?
And in LabVIEW 8.6 the Date/Time Format functions have an option to select if you want to see local time or UTC. And believe me if LabVIEW would display by default UTC instead of local time, 99.999% of the users would complain in a way that NI would not be able to do other business than answering those complaints anymore.
About the time zone difference you should probably check your Windows settings. LabVIEW is simply using whatever Windows believes is the timezone it is working in. You usually select that during installation of a Windows system and there are various options such as not letting Windows adjust for DST automatically and then you might have adjusted simply the timezone or something.
Rolf Kalbermatter
Message Edited by rolfk on 08-18-2009 09:32 PM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Default Time Stamp in PO

Similar Messages

Maybe you are looking for