Default value in custom field in webdynpro screen

Hi.
We have added a custom field in the Item level for Shopping Cart (SRM 7.1).
I however want a default value to show up or get populated in that custom field all the time. What is the best way to achieve this?
Thanks.
Anuradha.

depends upon how you have added it.
if its just though the structures and not added in the WD then you need to do it with doc-change badi.. and this is a preferred option.
if you have done it though WD then you can default the values using the post exits in the INIT method.
you can check if the value is blank then populate this default value (so that it does not overwrite the edited values).
moreover, do you want it as a non editable field or just a default value which user can change on the screen as well?

Similar Messages

Default value to a field in PBO

Hi all,
I need to set a default value to a fields in a screen.
But when i declared field as NUMC , i am not able to store 0 (zero value) into it .
and also when iam declaring as integer also iam not able to store 0 .
Pls anybody let me know how to set the defualt value.
its urgent

Hi Madhavi,
This is the issue with NUMC type field. It will not display zero on the screen. As you want it only numeric field then NUMC not suit your need as it can also store CHAR values. So you better declare it as CHAR field and in the code give error if someone enters CHAR values for that field like below.
IF l_field CA sy-abcde.
ERROR -Only numeric values allowed.
ENDIF.
Regards,
Atish

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

How to set default value to input field dynamically

Hello Experts,
I am using adobe forms inside Webdynpro Java.
Adobe form is having few input fields where at run time i want to assign default value to those fields.
How can i do it ?
Thanks in advance,
Vinay
Edited by: VINAY on Feb 24, 2011 6:39 AM

Hi Mate,
Just set the value to the webdynpro context fields on view init.
if its like that will override the values entered by use on the form.
just check if the default value is equall to the field value if yes leave it, if not dont touch that field.
does this make sense...?
Cheers,
Sai

Want to affix a default value to a field in PO creation

Hi all,
I want to set the default value for the field 'Account assignment category ' when a certain type of Purchase order is created in all the screens pertaining to Purchase order.
Please suggest
regards
kanishak

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Hello Guru's, How to setup default value to a field

Hello Guru's,,
will anyone guide me the procedure how to setup a default value to a field in mm01 SAP STD Transaction.
example: material description ' xxxxxxx ' , it should be constant for all materials.
full points for the answer
PV

Hi,
Pls look into it
These are the way to set the default values.
Step 1 :
CONSTANTS : P_MAKTX TYPE MAKT-MAKTX VALUE 'DESCRIPTION'.
STEP 2:
SET PARAMETER ID 'MAT' FIELD 'DESC'.
CALL TRANSACTION 'MM01' AND SKIP FIRST SCREEN.
If it is useful reward points.

Assigning a default value to a field

Hello Everyone,
       Could you please tell me how to assign a default value to a field in a transparent table, so that while creating an entry even if we don't enter the value, a default value will be assigned.
Thanks,
Anbu.

Like this
DATA: BEGIN OF itab OCCURS 0,
        field1 TYPE c VALUE 'X'
        field2 TYPE c,
      END OF itab.
append itab.
append itab.
You will have by default X set in both rows for field1.
Regards
Marcin
PS: Ooops I just noticed you meant transparent table but I wrote about internal one. As long as you maintain that table using maintenance view you can use event 05 - When Creating a New Entry and set fixed value for a field there. So whenever you create new entry it will receive that value.
Edited by: Marcin Pciak on Jun 23, 2010 8:57 AM

Field with a default value from another field

I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
Ben

Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

Show value in "customer" field of FAGLB03

Hi Experts,
we have a requirement to Show value in "customer" field of FAGLB03 for all sales related transactions.
Your support is appreciated.
Thanks

solution has been implemented using badi FAGL_ITEMS_CH_DATA

Adding customer field to selection screen of RFKORD11 - Customer Statement Printing Program:

Hello,
We are required to add an important customer field to selection screen of customer
statement printing program: RFKORD11 for our South African branch.
Please advise us regarding this matter,
is there a proper user-exit or a repair is needed?
Kind Regards.

Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better .

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

SDK: adding new value in custom fields

Hello,
I wanted to add new value in custom field of the resource table... I used this code (taken from SDK example) :
//Create and fill request for CustomData Service
SaveCustomDataRequest request = new SaveCustomDataRequest();
List<CustomValue> customData = new ArrayList<CustomValue>();
CustomValue attribute = new CustomValue();
//Field name
attribute.setName("NOTIFICATION_NUMBER");
//value received from ERP
attribute.setValue(notification);
customData.add(attribute);
request.setCustomData(customData);
//table name
request.setObjectAlias("RESRCE");
request.setRef(handle);
customDataService.saveCustomData(request);
But get a validation error, complaining about no ModifiedDateTime providen... How can I initialize this date or avoid the validation ?
I also tried using the ResourceDOService, using the setCustomData method, but same error...
Thanks

I'm using ME 5.2.2.2, sdk 5.0.1.8, for the moment locally on my laptop for development.
There is no stack trace, I can just see the error when debugging :
com.sap.me.frame.domain.RequiredValueValidationException: class com.sap.me.domain.model.CustomFieldDOmodifiedDateTime
The resource exist, I do a read request before to check if the custom field has value or not. Anyway, it's a collaboration plug-in, executed when we change the resource status, so I got the resource handle as input ;o)
I can confirm there are some resource with custom value in other fields with date = null. It occurs when I'm saving the data in the GUI (so entering data's manually in custom field, do a save => fields are not initialized)
Regards

How to set the default values of the field of the context.

Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.

In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh

Not allows to assign default value to input field using values in datastore

Hi Masters,
Consider that I have one input field in a form. I should assign default value to it. I should assign to it, the value which i have stored in a datastore. When i run the application, if i give default value as 123 ,then it is working fine i.e., it is showing 123 in the textfield in form , but if i give the default value as STORE@ProductId, then it is not displaying that value in the form.
Please help me out.
Thanks & Regards,
Kaushik Sreeram

Hi,
i faced this problem and here's what i concluded:
There's no way you can set default value for input field dynamicly, since the default value of input control is caculated only once (i think on initializing of the iView). The input control and the data store are initialized at the same time, STORE@productID is empty that time...
If you don't need to recieve value through the input field you're trying to initialize, but just to display the value from the store - I suggest you try using another control - Expression Box. It's value is calculated continiously, just like the Label's, and you can refere to it later.
Regards,
Yulia

Change the value of the field on the screen

Hello All,
I want to change the value of another field on the screen when the user selects the value for a particular field.
For eg: If i select ship-to-party value on the screen by F4 based on that the sales office and sales group values should change on the screen.
I am modifying the internal table that has these values, but its not showing the new values on the screen.
Please let me know how to resolve this issue.
Points gauranteed.....
Thank You,
Suresh

hi
use at selection-screen on help request for field1
OR on value request for field1.
Use selection screen events.
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN ON sel_opt1.
AT SELECTION-SCREEN ON test1.
AT SELECTION-SCREEN ON END OF sel_opt1.
AT SELECTION-SCREEN ON HELP-REQUEST FOR sel_opt1-low.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR test2.
AT SELECTION-SCREEN ON BLOCK block1
AT SELECTION-SCREEN ON RADIOBUTTON GROUP rad1.
Regards,
Prasanth
*Reward points if helpful

Default value in custom field in webdynpro screen

Similar Messages

Maybe you are looking for