Default value to notes tab in opportunity
Hi:
How to populate the default value to Notes (long text) in opportunity screen(Notes Tab). Any help is appreciating.
Many Thanks
Selvam
Hi Selvam,
you've marked your question as solved. Please share your solution so you can help others.
Regards
Gregor
Similar Messages
-
Default Value is not getting displayed in SUN ONE Ldap
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil KumarHi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi -
Why the default value is not the Oracle recommended?
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com -
BEx Variable default value does not pass thru to Webi report
Hi,
It appears that the integration between BEx and BOBJ Webi does not support default values when the webi report is scheduled. This means that if Webi/Infoview is the delivery method, than clients require 2 reports. 1 for adhoc and 1 for scheduling. Is there another way around this so 2 reports are not required? See SAP Knowledge Base Article https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136363534393826
Regards,
Dae JinHi,
Yes it is not supported. you can achieve by writing customer exit for this.
in istep 2,
check whether the variable value is intial.
if intial
pass default value
if not intial (else)
dont do any change, just pass the user input to restriction.
-Sriram -
Enterprise Project Fields Default values do not Register on PDP Pages for mandatory fields
Is it normal for "mandatory" eneterprise project field to come up as blank in a PDP page, when I have defined it to default value to a specific value in a list?
I've inserted such fields using the project field web part within the PWA Category. They display with the red astericks at the end of their name, but the field is blank. The default value does not appear in the field. However, if I select
the button next to their name and display the the list, the default value is shown in bold as if it is the one selected. I
I am not using any workflows in the EPT that is responsible for displaying such pages. Aslo, this is not a problem when the fields are not set to mandatory; they display the default value.
the problem with this is that you have to manually select the default (or some value form the list) in order to check in the project.
Would you agree that this is a bug in 2010?
/Spiro TheopoulosI tried anothe approach using javascript. I documented
here...
Juan Pablo.
surpoint.blogspot.com
jpussacq.me
@jpussacq -
Report parameter default value do not default correctly
Hello Experts, I have a cascading parameters in my report.
The first parameter called "Project" will allow to select a single Project Name from the list and based on the Project Name, the second parameters which is a "Date" parameter will give out list Months and Year in the Format 'Nov-14'.
For this Second parameter I defaulted the parameter to show First Month in the retrieved list of Months. But the problem is it will display the default Date correctly only certain times (there is a refresh problem). If i select a different project and it
has a month that was retrieved in the first project it will still show the that Month but not the actual default month (Start Month) for that particular Project.
Example: If I select Brisk from Project parameter, It will give me 18 months of Dates in the Date parameter. In that 18 month range first month is Sep-13 it will default to Sep-13 correctly. Then if I select a different project like "Creek" (example)
as Project , the Date parameter retrieves some dates corresponding to Creek Project and in the retrieved months if Date parameter has Sep-13 it will still show Sep-13 even though the
Start Date for Creek project is Jun-12.
1. Project Brisk: Defaulted correctly to Sep-13
2. Creek Project : Should default to Jul-12 but still shows Sep-13
Just for default value I created a separate dataset and used it to populate the default value and the SQL I used just for default value is as below:
SELECT DISTINCT TRUNC(DATE_KY, 'MM') AS DEFUALT_DATE
FROM DATE_D D
WHERE (DATE_KY = ADD_MONTHS(:PROJECT_DT, - 6))
Date parameter datatype is Date/Time,
Available Values Tab: label field is a String but the Value field and the default field (Default Values tab) are Dates
Thanks in advanceThanks Vicky for reply.
Yes you are right but I did not use First function as the query above retrieves only one date.
I used your suggestion but it did not fix it.
In this report I have three parameters.
1. Project Code (Visible)
SELECT DISTINCT PROJECT_CODE
FROM DIM.PROJECT
ORDER BY PROJECT_CODE
2. Project Date (Invisible)
SELECT
MAX(CASENA.MILESTONE
WHEN'ABCD'THENTRUNC(PROJECT_DATE,'MM')ELSENULLEND)PROJECT_DATE
FROM
DIM.PROJECTNA
WHERE(NA.PROJECT_CODE
=:PROJECT_CODE
or'ALL'=:PROJECT_CODE)
3. Start Date (Visible):
Available Values Query:
SELECT DISTINCT
--DER_DATE is "Value Field"
TRUNC(D.DATE_KY, 'MM') DER_DATE
--Display_date is "Label Field"
, TO_CHAR(D.DATE_KY, 'Mon-YY') Display_Date
FROM DATE_D D
WHERE DATE_KY BETWEEN ADD_MONTHS(:PROJECT_DATE, -6) AND ADD_MONTHS(:PROJECT_DATE, 6)
ORDER BY 1
Default Values Query:
SELECT DISTINCT TRUNC(DATE_KY, 'MM') AS DEFUALT_DATE
FROM DATE_D D
WHERE (DATE_KY = ADD_MONTHS(:PROJECT_DATE, - 6))
When you select a Project from "Project Code", it will give a "Project Date" and based on the "Project Date" it will give a date range in "Start Date". That is why I am using "Project Date" parameter in my
query. I even tried using Project code as you suggested but I still got the same result.
Thanks a lot for your reply. -
SUN ONE Ldap - Default value is not getting displayed
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
Can any one help me in this for this issue.
Regards,
K. Senthil KumarI assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.
-
SQL Loader- Default value is not inserted in table by direct method
Hi All,
I am trying to load data from a file to a table by SQL Loader. There is a particular date column which I am not loading from the File but have used a Default constraint to put SYSDATE in it. When I am using direct method load then it is not inserting nothin in this column but in conventional method it is inserting SYSDATE. But I want to do the load by direct method. Can anybody provide me a solution as how to load default value in direct method?
Thanks & regards.
SudiptaFor this special case, you can specify:
column_name SYSDATE
in your SQL*Loader control file. -
PROMPT WITH DEFAULT VALUES DOES NOT DISPLAY VALUES THE FIRST TIME
Hi,
With one of our scorecard reports, when you select a division, the leader role/leader prompt picklist values do not get populated the first time. Because this is only happening in reports we have written in house, we do not see this happening to the reports that are installed as default.
Is there any workaround known for this error.
Thanks and RegardsHey can somebody please let me know how to go about this isssue ..
Thanks -
Select-options How to assign Default value as "Not equal to something"
My req. is to asssign default value for a select-option as <> "DS1" . I am able to give default value as DS1 But dont know how to give "<> DS1" . Please help me
Thanking u in advance ..INITIALIZATION.
s_lifnr-low = '0001'.
s_lifnr-high = '0002'.
s_LIFNR-sign = 'I'.
s_lifnr-option = 'NE'.
append s_lifnr.
Regards,
Subramanian V.
P.S. - Raja, still mode = BSP ??? :-P
Message was edited by: Subramanian Venkateswaran -
Default Value in Operation Tab for Work and Numbers
Hi All,
When i save maintenance order, Work and Number column in operation tab defaulted with values as 2 & 1. Due to this duration is 2HR.
Calculation key is set as Calculate Duration in configuration.
Any Idea how Work and Number column in operation tab defaulted with values as 2 & 1 ??Sunil,
This is not standard..
Go to the Planning tab and click on the <SELECT ALL> button to see if any task lists have been automatically assigned. If so, then have a look at user-exits IWO10020/21.
In addition to the checks above, also check if you are using transaction variants or GuiXT.
PeteA -
How to assign default values to fileds in the org. tab of an oppurtunity
hi Experts,
I created a new org data profile and assigned it to a transaction type.
The org. tab consists of
org. unit
sales Org.
Distribution Channel
Sales Office
Sales Group
out of which first four are mandatory.
Now I need to populate "10" in the distribution channel field irrespective of whoever logfs in.
At present a list of sales offices and distribution chaneel popups up for selection by the user.
In my business scenario, I don't want the distribution channel to be taken from there instead it should hold a default value "10".
Pls help me in this.
regards,
Arul jothi.AHi Arul,
You can implement BADI 'CRM_ORGMAN_BADI' to populate the distribution channel field by default.You are to code in the method 'CRM_ORGMAN_MERGE' . The code you will have to write for defaulting value will be something like this :
CODE :
method IF_EX_CRM_ORGMAN_BADI~CRM_ORGMAN_MERGE.
data : lv_guid type CRMT_OBJECT_GUID,
lv_process_type type CRMT_PROCESS_TYPE.
finding the process type *****
lv_guid = is_orgman_wrk-REF_GUID.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
EXPORTING
IV_ORDERADM_H_GUID = lv_guid
IMPORTING
EV_PROCESS_TYPE = lv_process_type
EXCEPTIONS
ADMIN_HEADER_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*********defaulting value if process type is opportunity(OPPT)
if lv_PROCESS_TYPE = 'OPPT'.
cs_orgman_badi-DIVISION = '10'.
endif.
endmethod.
Hope this solves your problem.
Regards, -
Default value of BeX customer Exit variable not Displayed in WeBI??
Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PMHi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H -
Default Value in a DFF is not getting populated in Self Service Page
I had an issue in Self Service Page.
In the SS page there is hidden mandatory field in DFF segment,which should get populated with a default select statement.
But this field is not getting populated with the default values.
But this is working fine in Forms , i.e the default value is populated in forms.
Why the default value is not populated in Self Service Pages?
For Eg: If there is a DFF "SAMPLE_DFF" which has some context with segment
Context Code : GB_CODE
Segment : "Enter the Group"
and this segment is made required and defaulted with a select stmt (select stmt returns 'XXXXX')
In forms if am not entering any value, then its defaulted to 'XXXXX'.
But in Self Service this is not happening.
Can anybody help me out...Actually, I have narrowed down the problem. It is not quite the same.
DFF is Receivables, Address Information (Release 12). We have 2 attributes defined and we want the default value of the 2nd to be dependent on what the user selects in the 1st.
So the default value of the 2nd is defined as a SQL Statement, select :$FLEX$.INDUSTRY_CODE from dual (where INDUSTRY_CODE is the value set name from the 1st).
We know the syntax is correct because if we actually hardcode a default value in the 1st attribute (select 'BLAH' from dual), then we do see that the default value for the 2nd attribute fills in with BLAH as well. However, we do not want that. We want the user to choose a value for the 1st attribute from the LOV, and then have the 2nd attribute default to that same value. This is the part that does not seem to work in OAF, but definitely used to work in Forms.
Any thoughts?
Thanks much! -
Ssrs parameter default value not showing ,when available values is binded to query dataset
I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
ChandraHi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
Maybe you are looking for
-
How do i stop someone from hacking our accounts and we never know they do it?
My girlfriend and I have been struggling with her ex. He knows anything we talk about and gets pics that we send to each other or to other people. Somehow he logs on to both of our accounts and uses verizon messages to talk to other people then he sc
-
Need UNDO command to undo multiple objects at once
I'm writing an Illustrator plugin (in actionscript, no C code) that creates a group object and then adds some path items to it. The problem I have is as follows: If the user tries to UNDO (Ctrl+Z) what my plugin has done, Illustrator will undo each p
-
Need help with burning a dve from an imovie I have completed. I cannot find iDVD which i understand I should have with my original package. Can anyone help. Many thanks
-
Hi experts, Iam working on dialog programing and i have requirement to save two long texts at a time. I put the long texts(custom controls) in tab strip control(container1,container2). My problem is while saving.... 1)if i enter data only in first co
-
Hi All, I want to load data into FDM directly fom Oracle database through an Integration Script. I developed the script for integrating , but when i run the script i got an Error:in line Set rsAppend=DW.DataAccess.farstable(strworktablename) the Erro