Defective router or head space problem?

I just got an HP 9237 PC System 7 with wireless G networking. My older computer is hard wired into the router.
My airport extreme is also brand new, never used.
I can connect the HP on the Airport guest network, but I can't connect on the regular network. I can see the network in the list of available wireless networks, and both networks are set up in an identical except for the password.
But when I attempt to long into the wireless network, I get prompted for the password, I enter it, and then I get an error msg from the HP. But if I connect to the guest network, I get prompted for the password and then I connect OK.
This appears to be a problem with the airport router, but I wanted to ask you alls opinion before returning it.
I will continue with some more troubleshooting, I think I will change the guest network password to the same as the main wireless network password. Maybe somehow the HP isn't registering the seperate passwords, though I can't see why that should happen.

fyi, apple support was able to tell me how to correct this problem. I offer their solution in the event this also affects anyone else.
They had me delete the guest network and leave only the main network up. I was then able to log into the main network.
Later I will put in another guest network, I assume that will work. For some reason when both networks are established at the same time, it can cause the main network to fail to be able to be connected to. At least fail with the HP Windows 7 computer I was using, not sure about other OS computers.

Similar Messages

  • Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

    HI Friends,
    I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
    C: 9.6GB
    G: 24GB
    H:64GB & I: 73GB.
    RAM is 6GB
    While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
    i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
    During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
    G: drive has one more folder Program files which is of 155KB  and no other files exist in it.
    But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
    My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
    I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
    What could be going wrong?? Please suggest me how to correct this
    Thanks
    mv_d

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • HD space problem - startup disk shouldn't be full...

    Hello everyone.
    I'm having a really weird problem with my hard drive. All of a sudden, a message popped up saying that my Startup Disk was almost full, and the system profiler read it as having "zero k". This is extremely odd because I had about 19 Gb free just a moment before, and after checking folders, apps and documents there really shouldn't be a space problem. The first message came up right after importing a CD, but that shouldn't have caused this.
    I tried deleting some items, but space increased only by that tiny amount. After a restart, the indicated hard drive space randomly jumped up to 1 Gb. When I woke it back up right now it was down to 200 Mb, and after another restart it's just come up to 650Mb. It just seems to fluctuate...
    If anyone knows what the issue might be or what I could do about it, please help! Thanks,
    silvia

    Hi. Thanks for the tip, it was really helpful. Everything was as expected except for some log files in my Library. The sizes are mostly up to 100 K except for one huge 15.9 Gb file, called console.log.2 in a strange folder called 501
    It's located in
    Library > Logs > Console > 501 >
    I'm really not sure what these files are and what they do, or what these folders are. Can I trash them or is that a problem?
    Also, I've noticed that my hard drive space is actually continuously decreasing little by little... Do you think this is related?
    Thanks,
    silvia

  • Hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!!!

    hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!
    does anybody know how to solve this problem? thx!

    If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

  • HD space problem in iMovie projects

    I'm having hd space problems with one of almost two identical iMovie projects. I'm looking for a way to reduce size (or free up space with in the overly large project.)
    Both projects were imported same...firewire from camera.
    Both are about same length...approximately 1.25 hours.
    Both have approximately same number of clips and are at the same stage in the process...some minor editing...no titles or transitions in either.
    However, one project is 14gb in size, the other is 54gb. This is obviously causing space issues with my 160gb hd. (I rarely have a project over 25gb...even with lengthier projects with titles and transitions,)
    When I view trash info for larger project in iMovie, it shows 12gb, but when I delete, space is not cleared from hd. Project size remains at 54gb.
    The only difference in projects...with larger project I copied some files from a third iMovie project that I've since deleted.
    Any thoughts on how I go free up space or reduce file size?
    I've restarted computer, deleted iMovie pref file, ran disc utility.
    I'm running latest version of Tiger (10.4.11) on eMac. iMovieHD version is 6.0.3

    I suspect that when you copied those files from the third iMovie project you brought over portions of the clips that had been edited out. For example, if you have a 20 minute clip in iMovie that you trim down to 5 minutes, the project still retains the entire 20 minutes, even though you are using only 5 minutes of it in the project. This is true even if you empty the trash. As long as any part of the clip remains in the project, the entire clip remains in storage. This is due to iMovie's nondestructive editing feature. You never lose any part of a clip that you trim off. Some or all of the clips that you copied over from the old project may have been edited that way such that you thought, for example, that you were bringing over a 5 minute clip, but actually brought over 20 minutes of material. Thus your project size is larger than needed.
    One way to get rid of the space caused by the extra 15 minutes would be to export the clip to Full Quality quicktime movie, and then substitute the Quicktime movie clip for the original clip in your project. The quicktime movie will contain only the 5 minutes used in the project and not the extra 15 minutes that the original clip carried with it. This would limit some of your ability to re-edit the new Quicktime movie clip, because you will not be able to modify or eliminate any special effects or titles that that are contained in it. Likewise, the 15 minutes that you eliminated will be lost. So keep that in mind if and when you delete the old clips. Before you export the old clips to a Quicktime movie, you want to eliminate any unwanted editing that they may contain. If these old clips contain a lot of special effects that might account for their larger size as well.
    Keep a copy of the old edited clips until you are certain that your new project is exactly the way you want it.
    Hope this helps. If your problem is not the above, hopefully others will be able to offer some helpful comments.

  • Do I have a defective router?

    I have a Verizon supplied M1424WR router. About a week ago, the internet light went from green to orange. I called support and after various resets and disconnects to reload software, the thing came back up. (it took about 20 minutes to get it working and the tech had no idea what happened.). For the next couple of days everything was fine.
    For the past 2 days, when I click on a URL (almost any URL) in the address box, the internet light just sits there for a good 5-15 seconds before it finally connects to the site. Once on a site, the speed seems to be fine, although sometimes when navigating a site, the same kind of delay occurs.
    Oh and I always used the Verizon site to manage my FIOS TV remotely and now I cannot connect to my STB. I get the "unable to connect" message.
    If I get agreement that  it is the router, how do I get a new one from Verizon?
    Thanks
    sharkman
    Solved!
    Go to Solution.

    I am not saying for sure if have a defective router, but I can tell what I know..
    Those routers have a small/tiny NAT table, which may explain why you are having that/this/those issue(s).
    I point to http://www.dslreports.com/faq/16233
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Best strategy for iPhoto Disk space problems

    My wife is a shutter bug. She has about 20000+ pictures and growing fast. She also has an HD camera.
    So, disk space is an issue for us (500G iMac)
    Current iPhoto library is big (190G) and growing fast.
    What is the best solution to solve the out "iphoto library disk space problem"?
    1. Get a really good USB drive and put the iPhoto library on that?
    2. Get a NAS drive and put the iPhoto library on that?
    3. Split the libraries and remote the old ones and keep the new one local?
    4. Another option that I am not aware of?
    I tried some tests on a nice NAS solution (Netgear ReeadyNAS Ultra) and iPhoto seems to run really slowly from the mounted NAS drive.
    Any recommendations appreciated.
    Thanks,
    Mark

    1. Get a really good USB drive and put the iPhoto library on that?
    This is the best option - be sure that the EHD is always available prior to launching iPhoto
    2. Get a NAS drive and put the iPhoto library on that?
    This will not work unless you find a NAS that uses Mac OS Extended (journaled) formatting or you make a formatting or you make a disk image and place it on the NAS
    3. Split the libraries and remote the old ones and keep the new one local?
    works but loses much of the power of iPhoto's search capability
    4. Another option that I am not aware of?
    get a bigger hard drive in your Mac
    LN

  • Oracle Developer Suite 10g - Windows 7 - swap space problem

    Hi brothers and sisters,
    Hope all you are fine. I am facing swap space problem while installing Oracle Developer Suite 10g on Windows 7 . I have downloaded and installed Oracle Database 11g Express Edition successfully and it is working properly. Now, I have downloaded two files
    a. ds_windows_x86_101202_disk1,
    b. ds_windows_x86_101202_disk2
    to install Oracle Developer Suite 10g using Windows 7 Ultimate. The Oracle Universal Installer have passed the following issues:
    a. Operating system version,
    b. Monitor
    But while checking swap space, it gives a message, "0 MB available, 1535 MB required", Failed. I have 2 GB RAM installed and system managed paging file space which is currently allocated to 2038 MB in my system .
    Please solve me the problem.
    Noor

    increase the system virtual memory for the OS drive.
    check this link
    http://hamid-oracle.blogspot.com/2011/06/how-to-install-oracle-developer-suite.html
    also check this link.
    Re: error installing oracle forms 11g release 2
    Hope this helps
    If someone response is correct or helpful, mark accordingly. and if answered mark answered.
    Edited by: HamidHelal on Jun 27, 2012 2:28 PM

  • How to use a iomega prestige portable hard drive (mac edition) to resolve a start up space problem i.e. have 1.07gb need 4.85gb to upgrade tp itunes 7

    How to use an iomega prestige portable hard drive (mac edition) to resolve a startup space problem.  I need 4.85gb to up grade to itunes 7.  I have 1.07gb free

    com.apple.NVDAResman appears to be the culprit, indicating a problem with the graphics card. Run the Apple Hardware Test program, extended tests.
    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • SSRS 2012: Report Header PrintOnFirstPage-problem after report migration from SSRS 2008

    Hi ,
    I developed my report using VS 2008 IDE and the report header property "PrintOnFirstPage" is set to False.
    The content of the header are some textboxes and lines that should show only on page number > 1.
    This works fine in VS 2008 IDE in preview mode as well as with reports rendered by SSRS 2008 report server.
    Recently I migrate&convert the same report to SSRS 2012 I noticed a different rendering behaviour of my report.
    So in VS 2010 preview mode, the page headers content (textboxe etc.)  is not visible on first page but the headers space did not colapse as it does in VS 2008 IDE preview mode.
    I checked all the report properties but unable to find a solution to my problem.
    I was able to reprduce the same behaviour by creating a new report using VS2010 IDE.
    Any ideas are greatly appreciated
    Thanks
    Bodo

    Hi BodoHH,
    I have tested on my local enviorment and can't reproduce the issue, the issue can be caused by many factors, it can be caused by the properties setting and can also caused by the visual studio, Detais information below for your reference:
    As you mentioned that you have check all the report properties, please also check the tablix,Page Header,report body properties to see if the size are the same with that in the SSRS2008.
    Please open this rdl report in the report builder to see if the print layout is correct, if it works fine, the issue can be caused by the visual studio.
    Please also try to upload the rdl report to report manager to check the layout.
    Please also provide the snaphot of the layout in VS2010 to let us better analysis about the issue.
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Time Machine Disk Space Problem

    I have approximately 1TB of data (as confirmed by Time Machine) and I purchased a 1.5TB external backup disk to dedicate exclusively to Time Machine backups.  However, Time Machine will not backup because according to Time Machine there is not enough space (not even for an initial backup).  I have read discussions that suggest Time Machine uses 20% more space than the backup data (https://discussions.apple.com/message/17944550#17944550).  If that is true, I should have more than enough space.  Does anyone have any idea what the problem is?  Why is 50% of extra space not enough?  Thanks for your help.

    Did you partition and format the drive before using it?
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Trailing spaces problem during file content conversion

    I have developed a proxy to file scenario.And am using file content conversion for creating the file. The file is to be a fixed length file.
    File Structure
    <Header>
    <Item>
    <Item Trailer>
    <File Trailer>
    Each tab in the file has the last character mapped to spaces.
    Eg: Header00000001  2006011700000000020060<blank   space>
    Item00000001        2006011700000000020060<blank   space>
    The problem is that during file content conversion. XI does not preserve trailing spaces at the end of the line i.e.if a particular line in the file ends with space. It terminates the line at the last non-space character (in this case at 060).
    However we are required to maintain these trailing spaces at the end of each line.
    I have tried preserve white space in data type that does not work.
    I know that xslt mapping may solve the problem but I am looking for a workaround with my current graphical mapping.
    Looking for suggestions !!                                
    Thanks,
    Rashida

    Hi,
    I have the problem quite opposite to this where we are getting the trailing spaces at end of each record which should not come.
    File structure is
    <Record>
    - <Data>
      <Content>11/09/2007@210@ZACSL007@GBB-56436@PS01@29@1044@19@646@0</Content>
      </Data>
      </Record>
    ............. n records
    <Header>
      <File_Name>UK01</File_Name>
      </Header>
    Record structure in communication channel used is
    Header, Data
    Data.fieldFixedLengths     1024
    Data.addHeaderLine     0
    Header.addHeaderLine     0
    Header.fieldFixedLengths     0
    Header.fixedLengthTooShortHandling     Cut
    Data.fixedLengthTooShortHandling     Cut
    Header.endSeparator     '0'
    Actually if the length of record is less than 1024, rest of the length is being filled with spaces which should not occur.
    Many advanced thanks.
    Jitender

  • Filename space problem

    I have Iplanet web server(iws, 6.0 SP4) talking with weblogic 6.1 (using NSAPI plug-in). the request reaches iws and is internally redirected to weblogic. the problem i have is that there is a folder in weblogic which has spaces in filenames.
    When I try to access any file having spaces through Iplanet having spaces, the Get call only encodes URI with the letters of the filename till the first space and I get error back. The same problem is not seen when I access through Weblogic. Is there a know problem with Iplanet when spaces occur in URI?. how to resolve it

    Is the problem in the GET request sent to iWS or in the GET request sent from iWS to WebLogic? If it's the former, make sure the URL is properly encoded in the referring page. If it's the latter, the problem is a defect in the WebLogic NSAPI plugin.

  • Early 2011 (March) MBP hard drive crashed a week ago, all data was lost. Why is the Hitachi hard drive so prone to have defective read/write heads?

    Shouldn't Apple be better quality than this? I've used my old MBP from 2006 for 5 years with no problems. I've only had to back up data maybe once a year because it was so durable.
    But this 2011 MBP had the hitachi 320gb SATA drive and one day it started clicking and everything froze. I immediately shut it down took it to the Apple Store, in which the genius bar guy said there was nothing they could do other than swap out the drive (which I did myself as I was not prepared to be charged $250+ for services and waste 2-3 weeks as my warranty was 1 month overdue). Even with AppleCare coverage, Apple will still not recover the data...
    This is ridiculous! I strictly use the MBP for school/no gaming/haven't dropped it or moved it around rigorously/bought it instore (assuming it was handled properly). There is no reason for being such crap quality at $1300. I took it to a data recovery center and get this, the quote was $1700 as the read/write heads were defective and the surface of the disk was scratched, I could buy a new computer with that money! Were there no quality checks for these drives? I have PC laptops at home and none of them has had that problem! I'm planning to dispute this with Apple for losing years worth of valuable data.
    Does anyone have the same problem? Are early 2011 MBPs prone to hard drive failures?

    As Ogel stated drives fail. Unless you bought your 2011 Mac right when the early 2011 models came out you still should be under the one year warranty. They came out at the end of Febuary.
    So that drive should be covered, dependinig on when you bought your Mac. And they offer a extended warranty which if you had purchased it would cover the drive failure, Hardware not data.
    As far as the data, Apple includes the Time Machine program and there are 2, that I know of, cloning programs available to backup your data. If you did not use any of those programs you will ALWAYS LOSE YOUR DATA.
    That is a fact of computers. They fail, end of story. Unless you have multiple copies of your files you are going to lose them.
    Good Luck.

Maybe you are looking for