Define traffic light in MD04

Hi Gurus,
Can anybody please explain me the define traffic light button in MD04 in detail
Thanks
Anusha

Dear,
Go to MD04 Collective access -
Enter MRP Area / Plant
Enter MRP Contoller /Vendor
Collective list of materials will appear.
At the top of the screen , Define Traffic light button will be there.When you click on that you can visit the screen for defining traffic lights
Define traffic light depending on ranges of coverage.
Define traffic light depending on exception groups.
You carryout the necessary settings for traffic light and save.
Regards,
R.Brahmankar

Similar Messages

  • ' Define traffic light' for MRP

    hi
    I am using the collective list to view planning results using 'define traffic light'. I am able to define traffic light by user profile. I want to define traffic light by the MRP controller. Is there a way I can do it?
    thanks a lot

    Hi,
    The SAP help talks about creation of evaluation profile & defining limits via MRP controllers in customizing, but i am unable to find the same. If anyone can point where to do this setup, it would be quite helpful.
    Quoting from SAP help:
    ●  You have created an evaluation profile in Customizing for Material Requirements Planning and defined the limit values for the ranges of coverage there.
    ●  You have assigned the evaluation profile to an MRP group.
    ●  You have assigned the evaluation profile to the plant parameters.
    I guess your need can be met via BADI - MD_SET_TRAFFIC_LIGHTS_DS in the enhancement spot ES_MD_MRP_EVALUATIONS
    Hope the above helps.
    Regards,
    Vivek
    Added
    Just found this SAP Note - 947983, this helps in defining the Evaluation profile.
    Edited by: Vivek on May 19, 2009 9:52 AM

  • In MD06, how to define Traffic lights

    Hi to All,
    We are having more than one plants and every one are using MRP.
    After MRP run, we are using MD06 in order to evaluate numerous materials based on same controller.
    I would like to define or set traffic lights based on Supply & exception groups which will be applicable for users who
    would using this MD06 tcode.
    How to define this?
    Thanks & Regards
    Nitin

    please check whether this helps...
    https://forums.sdn.sap.com/click.jspa?searchID=31913209&messageID=4081312

  • Traffic lights Vs day's supply

    Hi,
    In MRP collective lists, system is showing red signal lights to all the materials and showing the message "3.0- days is less than limiting value of 0.1-"
    In the day's supply,1stRDS and 2nd columns system is showing the value 3.0-.
    In this case, how to change the signal light from red to green?
    Can any body please explain the concept behind this?
    Thanks in advance.
    Sekhar.

    hi
    traffic light depends upon the day's supply and exception messages.
    in md04 collective access , display all materials with MRP controller wise. Press the Tab " define traffic lights" there u can put ur own criterion of days supply and R days supply.
    Example how system calculates days supply.
    Calculation of the range of coverage: Starting from the current plant stock, the requirements are deducted one after the other along the time axis. This is done until there is a shortage (requirement > stock). The range of coverage is then the number of workdays between todays date and the date of the requirement that causes the shortage minus one day. The value after the decimal point is the ratio between the opening stock on the day of the shortage and the requirement on the day of the shortage.
    Stock = 240 pcs
    1st day: Requirement for 90  pcs => Stock = 150 pcs
    2nd day: Requirement for 70  pcs => Stock = 80  pcs
    3rd day: Requirement for 100 pcs => Shortage
    Range of coverage = 3 workdays minus 1 + 80/100
                      = 2 + 0,8
                      = 2,8
    Reward if useful
    Amit

  • Re: Traffic Light in Stock Overview List

    Hi All,
    I want some advice regarding the traffic light.
    How is it confiured.Please explain me,how to configure it. I want that, whenever there is shortage for the child items, the traffic light should be red.
    Please advice.
    Regards,
    Vivek

    Dear,
    Since these traffic lights are user settings
    Go to MD04 Collective access -
    Enter MRP Area / Plant
    Enter MRP Contoller /Vendor
    Collective list of materials will appear.
    At the top of the screen , Define Traffic light button will be there.When you click on that you can visit the screen for defining traffic lights
    Define traffic light depending on ranges of coverage
    Define traffic light depending on exception groups.
    You carryout the necessary settings for traffic light and save.
    Try using MD06 as well. or in MD05
    After executing the report in MRP list:mayerial list screen click on push button ---> define tarffic light
    Please refer my reply from this thread.
    [Traffic Light |Re: Traffic lights - MRP]
    Regards,
    R.Brahmankar

  • Zig zig red color light in MD04

    Dear all,
    When i check the MRP through md04 and when i do show overview tree and then i click order report that time on left side of dependent material code system shows a zig zig type red light box.
    This light system show when there is shortage of stock in plant.
    But when the stock come in plant the light changes to green and also light changes to green when the date of planned order is after the availability receipt of dependent material which has been defined in material master.
    So i want to set this red light only if their is no stock or shortage of stock in plant and it should not change to green considering the availability date mentioned in material master.
    Kindly help how to set this.
    Regards,
    Phalgun Patel

    Phalgun,
    In the same overview tree you see Define traffic light option. Configure it as per your requirements.
    Regards,
    Santosh Sarda

  • Exception groups & Traffic Lights for MRP run shortage quantities

    Hi Guys:
    How to define Traffic Lights and Exception groups in MD04/Mdo5 transaction?
    Or any literature available ?
    Thanks
    kodali

    Kodali,
    You can customize the exception message and grouping in configuration.
    Please follow below mentioned path and do necessary config.
    SPRO -> Production --> Materials Requirement Planning --> Evaluation --> Exception Messages.
    Regards,
    Himanshu

  • Traffic lights - MRP

    Can I change default traffic lights setting?
    How?

    Traffic Lights can be defined.
    You can use the exception groups to define under which conditions materials are indicated by red, yellow, or green traffic lights. Example: You want all materials, whose dates lie in the past, to be indicated by a red traffic light.
    The definition of traffic lights applies to both types of list.
    Prerequisites-
    You have accessed the material list in collective access, or the MRP list or stock/requirements list for a material.
    In case of individual lists: you have displayed the material tree.
    Procedure
    1. Choose Green Dot
    The system displays the Define traffic light dialog box.
    2. Enter the number of workdays for the parameters Days' supply, 1st receipt days' supply and 2nd receipt days' supply, and under which circumstances the materials are to be displayed with red, yellow, and green traffic lights.
    You want the traffic light to be red when the days' supply for a material is <= 0, yellow when the days' supply is > 0 and <= 10 days, and green when the days' supply is > 10 days.
    Enter:      
    Color     Days’ supply
      Red        0
    Yellow     10
    Green      999,9
    4. Use the exception groups to define under which conditions materials are indicated by red, yellow, or green traffic lights.
    You want materials with exception messages in exception group 4 to be indicated by a yellow traffic light and materials with exception messages in exception group 5 to be indicated by a red traffic light.
    Choose:
                     Exception group 5          Exception group 5 
      Red                 X
    Yellow                                                  X
    Green
    6. Save
    Reward if cleared and close the thread.

  • Mrp run and seeing the stock in md04 with green traffic light showing green

    Hi,
    i am running a mto scenario in which sale order is created and mrp run is done and i checked the stock md04 of a finished product in that the rawmaterials and semifinshed products are showing the traffic light green light of show overview tree in md04 when it is first time created there is no stock of the rawmaterial and semfinished product.
    with out any stock why it is showing the traffic light  green and what is the procedure to show the light red when stock is not there.
    rawmaterial is of consumable like paint in which it is not supporting in the bom and it is giving the message it is of process material can any body pls help me how paint is created as a consumable in bom creation.
    regards,
    muralidhar.t

    Hi muralidhar,
    MRP is a planning tool, not an availability check one.
    It means that you are getting a green light even though there's no stock because the lead time to procure is shorter than the requirement date.
    Regarding consumables, I'm not sure what you include in that, but you can either define them as non stock items in the BOM (in which case they will be specifically purchased for the production order), or maybe you meant that these materials are planned using consumption based planning; in this case they are defined normally as a stock item in the BOM, the difference being that they are not exploded in MRP, and the requirements are not triggered by the higher level.
    Regards,
    Mario

  • MD04 - no red traffic light appearing

    Hi Experts,
    We are not getting the Red traffic light even though there is no stocks available,
    It is showing in Yellow color instead of red color,
    The following has been displaying in MDO4 order tree, for Header material as well as down component,
    Exception Message for Lower Level
    I am unable get the purchase requisitions for down items, it is displaying planned order even for procuring items,
    Please suggest where to change or configure to get the purchase requisitions for procuring items,
    Thanks,

    Hi,
    For finished product procurement type is E
    and for procuring item F-42 (STO),
    Thanks

  • Displaying traffic lights in alv grid report?

    Hi everyone,
    I have an alv grid report.I m using the FM reuse_alv_grod_display to display my alv report.I am passing the fieldcatalogue automatically.I m getting the output perfectly.Now i have to add traffic lights to that alv report.
    Since i m passing the fieldcatalogue automatically i m confused to display the traffic lights?
    any suggestions please?
    Thank you.

    hi dp,
    look at the program i made... se the bold part you will be able to impelment lights easily,
    DECLARING TYPES POOL *
    All the definitions of internal tables, structures and constants
    are declared in a type-pool called SLIS.
    type-pools: slis.
    TABLES *
    tables: vbak,vbap,kna1.
    TYPES *
    *&--defining types for TABLE VBAK
    types: begin of t_vbak,
    vbeln type vbeln_va, "sales document
    kunnr type kunag,
    erdat type erdat,
    auart type auart,
    netwr type netwr_ak,
    waerk type waerk,
    vkorg type vkorg,
    vtweg type vtweg,
    spart type spart,
    name1 type name1_gp,
    stras type stras_gp,
    ort01 type ort01_gp,
    pstlz type pstlz,
    regio type regio,
    land1 type land1_gp,
    telf1 type telf1,
    end of t_vbak.
    *&--Defining types for TABLE VBAP
    types: begin of t_vbap,
    vbeln type vbeln_va,
    posnr type posnr_va,
    matnr type matnr,
    maktx type maktx,
    end of t_vbap.
    *&--MERGED FINAL SALES TABLE
    types: begin of t_sales_final,
    vbeln type vbeln_va,
    kunnr type kunag,
    posnr type posnr_va,
    erdat type erdat, "date of creation
    auart type auart,
    netwr type netwr_ak,
    waerk type waerk,
    vkorg type vkorg,
    vtweg type vtweg,
    spart type spart,
    name1 type name1_gp,
    v_lights type c,
    stras type stras_gp,
    ort01 type ort01_gp,
    pstlz type pstlz,
    regio type regio,
    land1 type land1_gp,
    telf1 type telf1,
    matnr type matnr,
    maktx type maktx,
    end of t_sales_final.
    defining wrokarea and IT.
    WORK AREA DECLARATION *
    *&---work area for Internal Tables
    data: wa_vbak type t_vbak.
    data: wa_vbap type t_vbap.
    data: wa_sales_final type t_sales_final.
    *&--work area for layout
    data: wa_layout type slis_layout_alv.
    INTERNAL TABLES DECLARATION *
    *&---Internal tables without Header Line.
    data : i_vbak type standard table of t_vbak,
    i_vbap type standard table of t_vbap,
    i_sales_final type standard table of t_sales_final.
    *&---Internal table for field catalog
    data : i_fieldcat type slis_t_fieldcat_alv,
    *&---Internal table for the sorting sequence.
    i_sortinfo type slis_t_sortinfo_alv,
    *&---Internal table for the event catalog.
    i_eventcat type slis_t_event,
    *&---Internal table for the top of page event
    i_listheader type slis_t_listheader.
    VARIABLE DECLARATION *
    data : v_progname like sy-repid, "Program name(system defined)
    v_gridtitle type lvc_title. "Grid Title
    INITIALIZATION EVENT *
    initialization.
    v_progname = sy-repid.
    refresh:i_vbak,
    i_vbap,
    i_sales_final,
    i_fieldcat,
    i_sortinfo,
    i_eventcat,
    i_listheader.
    clear: wa_vbak,
    wa_vbap,
    wa_sales_final,
    wa_layout.
    SELECTION SCREEN *
    SCREEN FOR ENTERING INFORMATION
    selection-screen begin of block b1 with frame title text-001.
    select-options: r_vbeln for wa_vbak-vbeln obligatory.
    select-options: r_erdat for wa_vbak-erdat obligatory.
    selection-screen end of block b1 .
    AT SELECTION SCREEN *
    at selection-screen.
    perform zf_validate_sales_doc_no.
    perform zf_validate_date.
    START OF SELECTION EVENT
    start-of-selection.
    perform zf_populate_header.
    perform zf_populate_detail.
    perform zf_append_sales_final.
    END OF SELECTION EVENT
    end-of-selection.
    *If Internal Table Is Populated Then Only Display Alv Report.
    if i_sales_final is not initial.
    Prepare fieldcatalog .
    perform zf_build_fieldcat using i_fieldcat.
    MODIFY the records IN the internal TABLE for the traffic lights.
    perform zf_modify_final.
    build event catalogue
    perform zf_eventcat using i_eventcat.
    build sorting
    perform zf_sorting using i_sortinfo.
    &---Build Listheader for TOP OF PAGE EVENT.
    perform zf_build_listheader using i_listheader.
    &---Build layout.
    perform zf_layout.
    &---Initializating Grid Title
    perform zf_build_grid_title.
    &---Display alv grid.
    perform zf_display_alv_grid.
    else.
    *If Table is not Populated ie Records Does not exist
    message 'Record Does Not Exist' type 'S'.
    endif.
    *& Form zf_validate_sales_doc_no
    text
    --> p1 text
    <-- p2 text
    form zf_validate_sales_doc_no .
    select single vbeln into wa_vbak-vbeln from vbak where vbeln in r_vbeln .
    if sy-subrc <> 0.
    message i101.
    endif.
    endform. " zf_validate_sales_doc_no
    *& Form zf_validate_date
    text
    --> p1 text
    <-- p2 text
    form zf_validate_date .
    if date is future
    if r_erdat-low >= sy-datum.
    message e102.
    elseif r_erdat-high >= sy-datum.
    message e103.
    endif.
    endform. " zf_validate_date
    *& Form zf_populate_header
    text
    --> p1 text
    <-- p2 text
    form zf_populate_header .
    select vbeln
    kunnr
    erdat
    auart
    netwr
    waerk
    vkorg
    vtweg
    spart
    into table i_vbak from vbak where vbeln in r_vbeln.
    if sy-subrc <> 0.
    message 'RECORD DOES NOT EXIST' type 'E'.
    endif.
    sort i_vbak by vbeln.
    *&--LOGIC TO GET FIELDS FROM TABLE KNA1 INTO INTERNAL TABLE I_VBAK
    loop at i_vbak into wa_vbak.
    select single name1 stras ort01 pstlz regio land1 telf1 into (wa_vbak-name1,
    wa_vbak-stras,
    wa_vbak-ort01,
    wa_vbak-pstlz,
    wa_vbak-regio,
    wa_vbak-land1,
    wa_vbak-telf1)
    from kna1
    where kunnr = wa_vbak-kunnr.
    modifying it_header.
    modify i_vbak from wa_vbak.
    clear wa_vbak.
    endloop.
    endform. " zf_populate_header
    *& Form zf_populate_detail
    text
    --> p1 text
    <-- p2 text
    form zf_populate_detail .
    if i_vbak[] is not initial.
    select vbeln
    posnr
    matnr
    into table i_vbap from vbap
    for all entries in i_vbak where vbeln = i_vbak-vbeln.
    endif.
    sort i_vbap by vbeln.
    sort i_vbap by posnr.
    *&--LOGIC TO GET FIELDS FROM TABLE MAKT INTO INTERNAL TABLE I_VBAP
    loop at i_vbap into wa_vbap.
    select single maktx into (wa_vbap-maktx)
    from makt where matnr = wa_vbap-matnr and spras = sy-langu.
    modifying it_header.
    modify i_vbap from wa_vbap.
    clear wa_vbap.
    endloop.
    endform. " zf_populate_detail
    *& Form zf_append_sales_final
    text
    --> p1 text
    <-- p2 text
    form zf_append_sales_final .
    sort i_vbak by vbeln.
    sort i_vbap by vbeln posnr.
    loop at i_vbak into wa_vbak.
    move-corresponding wa_vbak to wa_sales_final.
    read table i_vbap with key vbeln = wa_vbak-vbeln
    binary search transporting no fields.
    loop at i_vbap into wa_vbap from sy-tabix.
    if wa_vbap-vbeln <> wa_vbak-vbeln.
    exit.
    endif.
    move-corresponding wa_vbap to wa_sales_final.
    append wa_sales_final to i_sales_final.
    endloop.
    endloop.
    endform. " zf_append_sales_final
    *& Form zf_build_fieldcat
    text
    -->P_I_FIELDCAT text
    form zf_build_fieldcat using p_i_fieldcat type slis_t_fieldcat_alv.
    data: l_fieldcat type slis_fieldcat_alv. "local Workarea used
    clear l_fieldcat.
    FOR LIGHT IN COLUMN
    clear l_fieldcat.
    l_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
    l_fieldcat-fieldname = 'V_LIGHTS'.
    " FIELD FOR WHICH CATALOG ID FILLED.
    *We are passing final internal table 'I_FINAL' to l_fieldcat(local
    *variable
    l_fieldcat-tabname = 'I_SALES_FINAL'.
    " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
    l_fieldcat-just = 'C'. " FOR JUSTIFICATION.
    l_fieldcat-outputlen = 20.
    " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
    append l_fieldcat to p_i_fieldcat.
    FIRST COLUMN ********************************
    l_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN
    l_fieldcat-fieldname = 'VBELN'. " FIELD FOR WHICH CATALOG ID FILLED
    l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
    l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
    l_fieldcat-just = 'L'. " FOR JUSTIFICATION
    *l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
    l_fieldcat-lzero = 'X'. " OUTPUT WITH leading zeros.
    l_fieldcat-seltext_l = 'Sales Document'. " long text for header.
    l_fieldcat-seltext_m = 'Sales Doc'. " medium text for header.
    l_fieldcat-seltext_s = 'Sales Doc'. " sort text for header.
    l_fieldcat-outputlen = 20. " SET THE output length.
    l_fieldcat-ref_tabname = 'VBAK'. " FOR F1 & F4 help as
    append l_fieldcat to p_i_fieldcat.
    clear l_fieldcat.
    **************************SECOND COLUMN ********************************
    *l_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN
    l_fieldcat-row_pos = '2'. " POSITION OF THE COLUMN
    l_fieldcat-fieldname = 'POSNR'. " FIELD FOR WHICH CATALOG ID FILLED
    l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
    l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
    l_fieldcat-just = 'L'. " FOR JUSTIFICATION
    l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
    l_fieldcat-lzero = 'x'. " OUTPUT WITH leading zeros.
    l_fieldcat-seltext_l = 'Sales Document Item'. " long text for header.
    l_fieldcat-seltext_m = 'Sales Document Item'. " medium text for header.
    l_fieldcat-seltext_s = 'Sales Document Item'. " sort text for header.
    l_fieldcat-outputlen = 20. " SET THE output length.
    l_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 help as
    append l_fieldcat to p_i_fieldcat.
    clear l_fieldcat.
    endform. " zf_build_fieldcat
    *& Form zf_eventcat
    text
    -->P_I_EVENTCAT text
    form zf_eventcat using p_i_eventcat type slis_t_event.
    data: l_eventcat type slis_alv_event.
    clear l_eventcat.
    call function 'REUSE_ALV_EVENTS_GET'
    exporting
    i_list_type = 0
    importing
    et_events = p_i_eventcat
    exceptions
    list_type_wrong = 1
    others = 2
    if sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    TOP OF PAGE FORM
    clear l_eventcat.
    read table p_i_eventcat into l_eventcat with key
    name = slis_ev_top_of_page.
    "(COMPONENT "NAME"of structure)
    if sy-subrc = 0. "if success
    move 'ZF_TOP_OF_PAGE' to l_eventcat-form.
    "matches name and moves form to workarea and modifies table
    modify p_i_eventcat from l_eventcat index sy-tabix
    transporting form.
    endif.
    PF_STATUS_SET FORM
    clear l_eventcat.
    read table p_i_eventcat into l_eventcat with key
    name = slis_ev_pf_status_set.
    if sy-subrc = 0.
    move 'ZF_PF_STATUS_SET' to l_eventcat-form.
    modify p_i_eventcat from l_eventcat index sy-tabix
    transporting form.
    endif.
    USER_COMMAND FORM
    clear l_eventcat.
    read table p_i_eventcat into l_eventcat with key
    name = slis_ev_user_command.
    if sy-subrc = 0.
    move 'ZF_USER_COMMAND' to l_eventcat-form.
    modify p_i_eventcat from l_eventcat index sy-tabix
    transporting form.
    endif.
    endform. " zf_eventcat
    *& Form zf_sorting
    text
    -->P_I_SORTINFO text
    form zf_sorting using p_i_sortinfo.
    endform. " zf_sorting
    *& Form zf_build_listheader
    text
    -->P_I_LISTHEADER text
    form zf_build_listheader using p_i_listheader type slis_t_listheader.
    data: l_listheader type slis_listheader.
    refresh p_i_listheader.
    clear l_listheader.
    HEADER
    l_listheader-typ = 'H'.
    l_listheader-info = 'FUJITSU CONSULTING INDIA LTD.'.
    append l_listheader to p_i_listheader.
    SELECTION
    l_listheader-typ = 'S'.
    l_listheader-key = 'Date:'.
    l_listheader-info = sy-datum.
    append l_listheader to p_i_listheader.
    ACTION
    l_listheader-typ = 'A'.
    *l_listheader-key =
    l_listheader-info = 'SALES ORDER ALV REPORT By Rohan Malik'.
    append l_listheader to p_i_listheader.
    endform. " zf_build_listheader
    *& Form zf_build_grid_title
    text
    --> p1 text
    <-- p2 text
    form zf_build_grid_title .
    v_gridtitle = 'List of Purchase Order'.
    endform. " zf_build_grid_title
    *& Form zf_display_alv_grid
    text
    --> p1 text
    <-- p2 text
    form zf_display_alv_grid .
    call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
    i_callback_program = v_progname
    i_grid_title = v_gridtitle
    is_layout = wa_layout
    it_fieldcat = i_fieldcat
    it_sort = i_sortinfo
    it_events = i_eventcat
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    tables
    t_outtab = i_sales_final
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    endform. " zf_display_alv_grid
    *& Form zf_top_of_page
    text
    --> p1 text
    <-- p2 text
    form zf_top_of_page .
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = i_listheader
    i_logo = 'ENJOYSAP_LOGO'
    I_END_OF_LIST_GRID =
    endform. " zf_top_of_page
    *& Form zf_user_command
    text
    --> p1 text
    <-- p2 text
    form zf_user_command using r_ucomm like sy-ucomm
    rs_selfield type slis_selfield .
    case r_ucomm. "FCODE
    when 'VA03'.
    read table i_sales_final into wa_sales_final index rs_selfield-tabindex.
    set parameter id 'AUN' field rs_selfield-value.
    call transaction 'VA03' and skip first screen .
    message i102 with rs_selfield-value .
    when '&IC1'. "for hotspot with VBELN, POSNR, MATNR, KUNNR.
    if rs_selfield-fieldname = 'MATNR'.
    set parameter id 'MAT' field rs_selfield-value.
    call transaction 'MM03' and skip first screen.
    return.
    message i103 with rs_selfield-value .
    endif.
    if rs_selfield-fieldname = 'VBELN'.
    set parameter id 'AUN' field rs_selfield-value.
    call transaction 'VA03' and skip first screen.
    return.
    message i104 with rs_selfield-value .
    endif.
    endcase.
    endform. " zf_user_command
    *& Form ZF_PF_STATUS_SET
    text
    --> p1 text
    <-- p2 text
    form zf_pf_status_set using rt_extab type slis_t_extab.
    set pf-status 'Z11_RM_ALV_SO'.
    endform. " ZF_PF_STATUS_SET
    *& Form zf_layout
    text
    --> p1 text
    <-- p2 text
    form zf_layout .
    wa_layout-zebra = 'X'.
    wa_layout-lights_fieldname = 'V_LIGHTS'.
    wa_layout-lights_tabname = 'I_SALES_FINAL'.
    " 1, 2 or 3 for red, yellow and green respectively.
    endform. " zf_layout
    *& Form zf_modify_final
    text
    --> p1 text
    <-- p2 text
    form zf_modify_final .
    CODE TO EXECUTE LIGHTS
    *start of loop
    loop at i_sales_final into wa_sales_final.
    *giving conditions and modifying as we want to change many rows
    if wa_sales_final-netwr <= 10000.
    wa_sales_final-v_lights = '1'.
    modify i_sales_final from wa_sales_final transporting v_lights.
    elseif wa_sales_final-netwr > 10000 and wa_sales_final-netwr <= 100000.
    wa_sales_final-v_lights = '2'. " Exception.
    modify i_sales_final from wa_sales_final transporting v_lights.
    else.
    wa_sales_final-v_lights = '3'. " Exception.
    modify i_sales_final from wa_sales_final transporting v_lights.
    endif.
    endloop.
    reward point s if helpful
    rohan malik

  • How to change the Traffic light positioning in ALV?

    Hai All,
    I am displaying a traffic light field in my ALV Grid. Now i want to display another field in the first position and move the traffic light to second or any other position. COL_POS seems to be not working, is there any chance of doing this?
    Best regards,
    rama

    >
    newtoAbap wrote:
    > Hai All,
    >
    > I am displaying a traffic light field in my ALV Grid. Now i want to display another field in the first position and move the traffic light to second or any other position. COL_POS seems to be not working, is there any chance of doing this?
    >
    > Best regards,
    > rama
    If you are using EXCP_FNAME in the ALV layout to display your traffic lights, it may not be possible to move your light field to any other position..
    One possiblity is to define your own field (as icon) in the internal table and assign the Traffic light icon to that field... By this approach, you can position that field in any place in your input structure while generating field catalog or defining your structure
    Here is an example with SALV,
    http://wiki.sdn.sap.com/wiki/display/Snippets/displayingiconsinalvusingclasscl_salv_table
    Example with icons in REUSE FM (can be used in ALV OO) and there should be umpteen examples in SDN also
    http://wiki.sdn.sap.com/wiki/display/Snippets/TrafficlightsinALVdisplay

  • Traffic light in RF monitor screen (LRF1) - how it is derive from?

    Hi,
    This is a question about WM-RF. My question is how does the system determine the traffic light color in the RF monitor screen (LRF1). I read the SAP help portal and compare it to the screen and it still doesn't make any sense out of it..
    On the SPRO, there is DEFINE QUEUE table, with thefollowing setup:
    WS--QUEUEQName-CapacUsed-CapacUsed----AccessLim
    110--B01_GEN-GenName610--
    2StrictLimitation
    Thus the relation is: 6/10 = 0.6
    Next, I went to LRF1 and saw this record with warehouse 110, and Queue B01GEN, and having the following value_:
    QUEUE -
    TOs--LOADProc.By--
    Propotion
    B01_GEN----150.0002--
    Green
    Thus the relation is: 15/2 = 7.5
    Why is it green? SAP help portal give the following explaination, and I don't know to derive it?
    A- The queue tranffic light is green if the relation is less than the value given in the left relation field.
    B - The queue traffic light is yellow if the relation is greater than or the same as the value specified in the right field.
    C - The queue traffic light is red if the relation is greater than or the same as the value specified in the left relation field.
    Please share if you know.
    Thanks..Tuff

    Hello,
    Does anyone know my question?
    Appreciate some help here.
    Thanks,
    tuff

  • How do I add 'Traffic Lights' as sorting option?

    Hi! We use MD04 most often. We are able to set the traffic lights, however 'Traffic Lights' does not show up on that next screen as a sorting option. Any ideas on why not? Thank you for any help!  Maria

    Thanks for your response Steve, but Spier is correct I'm looking to add it as a print driver. I can export to pdf fine but sometimes when that isn't working or if I want the file to be compressed further I do File>Print and chose a printer, usually there is an option for Adobe PDF but the only option I currently have is Postscript. Looks like it was taken away. Thanks everyone!

  • Problem when creating multiple traffic lights column in SALV...

    Hello Experts,
    I am using ALV display using the SALV(factory) method. My problem is,
    only the last excception column shows. I making 3 exception columns. Below is my code:
    gt_output[] = im_output[].
        TRY.
            cl_salv_table=>factory(
              EXPORTING
                list_display = ''
              IMPORTING
                r_salv_table = lcl_table
              CHANGING
                t_table      = gt_output ).
          CATCH cx_salv_msg.                                "#EC NO_HANDLER
        ENDTRY.
        lcl_functions = lcl_table->get_functions( ).
    *   Set all standard ALV functions
        lcl_functions->set_all( abap_true ).
        lcl_columns = lcl_table->get_columns( ).
        lcl_columns->set_optimize( '' ).
    *   Set display to striped pattern
        lcl_display = lcl_table->get_display_settings( ).
        lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
    */Sort columns
        TRY.
            lcl_sorts = lcl_table->get_sorts( ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        lcl_sorts->set_group_active( ).
        TRY.
            lcl_sorts->add_sort(
              columnname = 'EBELN'
              subtotal   = '' ).
          CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_sorts->add_sort(
              columnname = 'EBELP'
              subtotal   = '' ).
          CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
        ENDTRY.
    */Set column names
        TRY.
            lcl_columns->set_exception_column( 'EXCEPTION1' ).
            lcl_columns->set_exception_column( 'EXCEPTION2' ).
            lcl_columns->set_exception_column( 'EXCEPTION3' ).
          CATCH cx_salv_data_error.                         "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'EXCEPTION1' ).
            lcl_column->set_short_text( text-h01 ).
            lcl_column->set_medium_text( text-h01 ).
            lcl_column->set_long_text( text-h01 ).
            lcl_column->set_output_length( '9' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
    *    TRY.
    *        lcl_columns->set_exception_column( 'EXCEPTION2' ).
    *      CATCH cx_salv_data_error.                         "#EC NO_HANDLER
    *    ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'EXCEPTION2' ).
    *        lcl_column->set_short_text( text-h07 ).
            lcl_column->set_medium_text( text-h07 ).
            lcl_column->set_long_text( text-h07 ).
            lcl_column->set_output_length( '15' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
    *    TRY.
    *        lcl_columns->set_exception_column( 'EXCEPTION3' ).
    *      CATCH cx_salv_data_error.                         "#EC NO_HANDLER
    *    ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'EXCEPTION3' ).
    *        lcl_column->set_short_text( text-h08 ).
    *        lcl_column->set_medium_text( text-h08 ).
            lcl_column->set_long_text( text-h08 ).
            lcl_column->set_output_length( '23' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
    Hope you can help me guys. Thank you and take care!
    Edited by: Viraylab on Feb 15, 2008 3:50 PM

    you can only define one exception per alv table. it's a limitation.
    if you require more than one traffic light, use icons instead

Maybe you are looking for