Delay and reverb problem!!!!!!

hello i have a very bad problem, im using the delay fx, and it doesnt work corectly, it makes sound like 2 sec and then it mutes, and starts again to sound after like 5 seconds, even if i use solo buton, and sometimes works!! can anyone help cause i dont have more delays or reverbs that i know. it didnt happen in logic 7.... please support

yes the delays stops even if u put the fdbk very hi, so its a problem with the program, where can i talk to someone of logic??? i live in mexico..
thanks

Similar Messages

New Installation : Login Delays and Wifi Problems

Hey There,
I just a HP Pavilion DV2850ET laptop computer and decided to run Arch on it. But I have 2 major problems as for now. I'll be very pleased if I get over them.
1) When the kernel starts loading with vga=792 parameter on, 2 Arch Linux logo shows up instead of 1.. I don't think that this is normal.
2) I've installed all packages with the newest ISO image release: Archlinux-i686-2007.08-2.core.iso - It's installed without any problems. When the login prompt appears (that I'm going to write root to do the rest of the installation for a while) I can't write anything for about 10-15 seconds. After the 10-15 seconds of waiting, I can write whatever I want.. But this happens all the time and I have to wait everytime I open the computer. I thought that maybe this could be something related with the kernel installed so I upgraded to testing. But nothing changed. This is the most annoying part actually..
3) I have 07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) on the laptop. There are several modules for this card as far as I can see like: ipw3945, ipl3945, etc.. During the installation, I let hwdetect to fill modules part in rc.conf and it added these modules: sky2 iwl3945 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore - What are all these sound modules any way ? Are they really necessary ?
Here are lspci and dmesg outputs. I hope they help..
lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
08:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
08:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
dmesg:
Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Mon Oct 15 16:46:31 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
BIOS-e820: 000000007fec0000 - 000000007fedf000 (ACPI NVS)
BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7e50
Entering add_active_range(0, 0, 523968) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523968
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 523968
On node 0 totalpages: 523968
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292291 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7E20, 0024 (r2 PTLTD )
ACPI: XSDT 7FED05BA, 0074 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 7FEDBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
ACPI: DSDT 7FED12C7, A8FF (r2 INTEL CRESTLNE 6040000 MSFT 3000000)
ACPI: FACS 7FEDEFC0, 0040
ACPI: HPET 7FEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 7FEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TCPA 7FEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
ACPI: TMOR 7FEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: SLIC 7FEDBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
ACPI: APIC 7FEDBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7FEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7FED0FEA, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
ACPI: SSDT 7FED062E, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912)
ACPI: PM-Timer IO Port: 0x1008
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: S. Rosa CRB APIC at: 0xFEE00000
Processor #0 6:15 APIC version 20
Processor #1 6:15 APIC version 20
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 519875
Kernel command line: root=/dev/sda2 ro quiet vga=792 noapic nolapic
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.160 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071792k/2095872k available (2442k kernel code, 22764k reserved, 814k data, 296k init, 1178368k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0435000 - 0xc047f000 ( 296 kB)
.data : 0xc0362839 - 0xc042e21c ( 814 kB)
.text : 0xc0100000 - 0xc0362839 (2442 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3994.51 BogoMIPS (lpj=6655229)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.19 BogoMIPS (lpj=6649906)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Total of 2 processors activated (7986.70 BogoMIPS).
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to [email protected]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: cc000000-ceffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: f2000000-f3ffffff
PREFETCH window: f0000000-f1ffffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: f4000000-f40fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: f4100000-f41fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f4200000-f42fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 1578k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b540
vesafb: pmi: set display start = c00cb5a3, set palette = c00cb5fe
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 296k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.3
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 cmd 0xf8830100 ctl 0x00000000 bmdma 0x00000000 irq 10
ata2: SATA max UDMA/133 cmd 0xf8830180 ctl 0x00000000 bmdma 0x00000000 irq 10
ata3: SATA max UDMA/133 cmd 0xf8830200 ctl 0x00000000 bmdma 0x00000000 irq 10
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011830 irq 14
ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011838 irq 15
ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
ata4.00: configured for MWDMA2
scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 10, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1a.1[b] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 10, io mem 0xf4505c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4506000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018a0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 10, io base 0x000018c0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-5: new high speed USB device using ehci_hcd and address 3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 4-5: configuration #1 chosen from 1 choice
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:05:00.0 to 64
sky2 0000:05:00.0: v1.18 addr 0xf4000000 irq 11 Yukon-FE (0xb7) rev 3
sky2 eth0: addr 00:16:d3:f0:65:5b
usb 7-2: new full speed USB device using uhci_hcd and address 2
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.0ds
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:07:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
usb 7-2: configuration #1 chosen from 1 choice
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7FED0CA8, 027A (r1 PmRef Cpu0Ist 3000 INTL 20060912)
ACPI: SSDT 7FED0B14, 010F (r1 PmRef Cpu0Cst 3001 INTL 20060912)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: SSDT 7FED0F22, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
ACPI: SSDT 7FED0C23, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZS0] (54 C)
ACPI: Thermal Zone [TZS1] (65 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usbcore: registered new interface driver hiddev
Linux agpgart interface v0.102
input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ACPI: PCI Interrupt 0000:00:1f.3[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
input: PS/2 Mouse as /devices/virtual/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
input: Video Bus as /devices/virtual/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/virtual/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt 0000:08:09.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[f4200000-f42007ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci: SDHCI controller found at 0000:08:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:08:09.1[b] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
mmc0: SDHCI at 0xf4200800 irq 10 DMA
EXT3 FS on sda2, internal journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a00fd365135]
Clocksource tsc unstable (delta = -266484522 ns)
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
usb 4-4: new high speed USB device using ehci_hcd and address 5
usb 4-4: configuration #1 chosen from 1 choice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 5:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete

At this moment, I believe the ipw3945 module and it's deamon work better than the iwf3945. So you can start changing this. In the module line in rc.conf change iwf to ipw. In the deamons line add before the network deamon ipw3945d and youre done.
The double archlogo is standard I think, got them too

Aironet 1310 Bridge, delay and timeout problem

Hi,
We have 3 Aironet 1310 Wireless Bridge. 1 of them is Root bridge, others non-root and Workgroup bridge. Normally ping delays are 6-7 ms avarage, but somedays 200-300 ms and timeouts. I dont understand what is the reason. Any other wireless telephone? or other 2.4 Ghz antenna? or ground voltage of buildings? 1 of the non-root bridge's configuration is at the attachment.
Regards.

hi i think it is not slution because i have 4 root bridge and i've 45 non-root bridge and somedays there are alot of troubles about telecommunication with ip phone and i chose 11 channels all but i have toruble about this

Simple delay and reverb setup

Hi,
I have assigned a knob in MainStage to control the volume of Aux/Bus 1 (Reverb). I want this knob to automatically do the same in other patches (like in Apple's templates) and I can't seem to find to do it (not on Concert or Set level, since it's always on then and it should be off when the Reverb effect is not send).
Any suggestions? I think it's a small thing I overlooked, but can't seem to find it :-/
TIA,
Jasper.

In version 1 of MainStage all the templates I have tried either come with no controls set up at all (there is a warning given as the template loads) or have one or more controls mapped at Concert Level. To see these, you will have to select Concert Level then click on an appropriate controller e.g. Output. This will then show you its path. If you select Output at any other level e.g. Patch, you should see the warning that "this item is mapped at the Concert Level"
Once a control is assigned at Concert Level it becomes unassignable at any lower level unless you select "Over ride". This means that if you have a volume control for Reverb on Bus 1 set to knob 15, every time you turn knob 15 it will change the Reverb volume on the patch you are currently using. It should do that only if one or more channel strips have been sent to Bus 1. If they haven't, then the knob should be inactive.
I think that this is what you are trying to describe.

No delay or reverb on export

I am using STP 1.0.3. When i export a mix, my mix is missing Mac OS DELAY and STP REVERB fx. Why? I have tried different bit rates, 24 and 16. Playback in STP is perfect, all fx are there and audible.
G5 Dual 1.8 Mac OS X (10.4.4)

I just followed Simon's instructions, and it worked.
Then I did the following:
- Dragged two more clips out onto the timeline in
track 2
- Added Delay to track 2
- Added Soundtrack Pro Reverb to tracks 1 and 2
- Export Mix
And the mix I exported sounds like it should with
reverb and delay on both tracks. I wonder what could
be causing this for you, Chad. I noticed you're on
1.03 and I've upgraded to Soundtrack Pro 1.1, so we
might not be comparing apples to apples.
I've got a friend with a Quad 2.5. I'll e-mail him
and ask him to try this test to see if the machine is
the problem.
hey Collings!
awesome that you are helping check this out!
try this... IMPORTANT detail... on a track that has MAC OS DELAY and STP REVERB make sure the sample has space in between... i.e. you drag a clip in... make it 1 seconds then skip 1 second (blank space in the track) then have the clip again. What STP should do is... once a clip ends it should continue the effect (delay in this case) however long it needs to, you could make the DELAY 2 seconds and even though the clip ends at 1 second the delay continues.

Server 2008R2 mapping to shared folders fails users of Windows 8.1 but seems OK on Windos 8.0 and no problems for Windows 7

Having read what I could from the related questions, the answers still elude me. This issue apparently is specific to Windows 8.1.
First, a little background.
1: The server is not on a domain, The system runs Server 2008-R2 standard with all folders shared across a standard "Workgroup" type network. They would prefer to
leave this layout intact.
2: The shared folders are nothing but Data files. There are no active system folders or anything used in an "active" environment. They are mostly Word doc, excel
files, pdf, txt, etc. However, due to the requirements of the software that needs to access these files, they Must
reside on a mapped network drive letter. Nothing else works due to the way the SQL database program stores the reference points back to the data.
I have had some success using what amounts to a “simulated” mapping using WebDAV to access the server. But access speed is a lot slower ad file size is limited.
3: The system has been configured as-is for the past 3 years with Users all on Windows 7 x64 (mixed OS, some Home Premium, some Professional) and the only problems that come up are when
access is through an ISP that blocks port 445. This was the original reason for finding a WebDAV/Cloud method just for those Users since they were unable to Map drives to anything on the Office Servers from their Home Internet even when using a VPN.
When Windows 8.0 became the only version available, I added a few users whose new laptops came with 8.0 from the vendors. While there were a very few minor problems, for all practical
purposes, I was still able to provide access to the mapped folders.
As the Windows 8.1 roll-out progressed, some users were successfully upgraded while others are still stuck in Windows 8.0. The issues with this seem to be hardware related and vary
depending on the Make and model of the laptop. I have been assured that eventually all of these will be able to advance to 8.1. But this delay has given me an excellent mixed OS environment for testing.
On the users who have not yet purchased new equipment and who are still using Windows 7. There has been no change. Their drive mapping is stable and they can always connect as usual.
Those blocked from lack of port 445 or still blocked. Systems inside the Office and those with ISP's who allow port 445 can use all mapped drives as normal.
Users who had Windows 8.0 and who have not yet been able to upgrade to 8.1 also have been unaffected. Same results as Windows 7.
Users who got the Windows 8.1 upgrade as well as those that came factory loaded with Windows 8.1 seem to be a never-ending list of problems. The ones that came native with 8.1 are worst
of all. The list of error codes runs through everything that has to do with “communication with the server”. As far as I have seen, this appears to be the issue.
Whether they are in the office on a wired network connection or at home on a Wi-Fi connection, the issues have the same results but the actual error codes may vary slightly. All of
them refer back to an inability to communicate with the server.
Nothing on the server has changed in any way. Users with Windows 7 continue to have zero problems, Users with Windows 8.0 seem to be doing fine as well. Only those with Windows
8.1 are affected and their problems are dramatic with everything from a total loss of drive mapping to misdirected data when the maps are active.
I have tried to make the drives automatically remap on reboot. I have tried registry modifications. I have done everything I can think of to make a difference but the results are the same
for every system using 8.1. The mapped drive letters invariably disappear. Sometimes while the system is in use ( I think I have been able to trace this to times when the system enters Sleep or Hibernate) but always when the system reboots.
One detail that might point to somewhere is that the "time to connect" when mapping the drive is so long that I believe some of the original failures were due to not waiting for a
minimum of 3 or 4 minutes to give time for the Shares to show-up in order to map them. Once the mapping is successful, the file access speed seems normal. But invariably, the drive becomes "unmapped" repeatedly each day.
I know this was a long question but I have tried to provide every possible detail for anyone who has experienced events like this who may already have a solution. I would even be glad
to purchase a 3rd party application if that is what it takes to get this to work. My next planned effort is to try using Server 2013 but I am afraid that might open another can of worms for those who still use Windows 7.
I have also been told that this is in some way related to the push to "Cloud" support in Windows 8.1 OS but I do not see where this would come in. I can say that this was the
one place where things continued to work as before. People who had Windows 8.1 and who had to use the CLOUD copies of our data are still able to connect to it with no problems.
Any suggestions appreciated. Preferably those that would not need extensive changes to the basic network structure. This "workgroup" consists of less than 25 users and any
extreme measures would be hard to justify

Hi，
I sugget you try to ping server so that we can verify the connectivity.
Can windows 8.1 access Windows Server 2008R2?
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin Xu
TechNet Community Support

Please Help! 10.6.8 Update and subsequent problems

On Friday, 2/10/2012, the Software Update popped up and informed me that new updates were ready to be installed on my MacBook Pro.
I clicked the update button and the updater installed the following updates:
iTunes v10.5.3
Security Update 2012-001 v1.1
MacBook Pro Video Update v1.0
Remote Desktop Client Update v3.5.2
Keynote 5.1.1 v5.1.1
Safari v5.1.2
Java for Mac OS X 10.6 Update 6 v6.0
Soon after installation Safari started crashing whenever I opened new tabs. I reset Safari and that problem went away.
I also run a Virtual Machine (Windows Vista imported from a Sony Vaio). The virtual machine has never had a problem and I used it on Thursday before the update and it worked fine. However, after the updates, I can no longer use the virtual machine. It has been corrupted. I get a message that says "Unable to Access Hard Drive 1: input/output error."
Then my whole Mac started running slow, especially Safari. In Safari, pages are slow to load and I get the spinning color wheel (or "beach ball," as I have heard it referred to) when I'm on any web page. Pages take long to load. After they load, I still get the spinning color wheel consistently.
Other programs are somewhat slower to load, as well, and when switching between open programs, there are delays and even more spinning color wheels and beach balls.
My computer has never had a problem until after I installed those updates.
I have repaired permissions and I have also re-donloaded the combo straight from the Apple website, but that did not work.
Is anyone else having this problem? Or has anyone else had this problem? What to do?
Thanks.
And, uhm, no- I did not have Time Machine set up, unfortunately.

Grant, thanks for the reply.
I have NOT been considering a new hard drive. My MacBook Pro is not even two years old, yet (I bought it in May 2010). So, the thought of having to replace my hard drive within 2 years has not even entered my mind and (as I stated) I only started having these problems within the past 2 weeks after having installed the latest updates via Software Update.
Really, if my Hard Drive needs to be replaced after less than 2 years of light use, then I will just chalk this up as a lesson learned and just not buy another Apple product and would probably just buy a Windows-based laptop rather than replace the HD in my MBP.
I am working on transferring my files (the ones that will still open and/or copy) to an external hard drive and doing a clean install of my OS X. I also am trying to figure out if I can somehow manage to save my pics that will not copy to the external hard drive but are saved on my iPad before I do so.
I'm not a computer or Mac genius by any stretch of the imagination, but I do appreciate your reply and advice. Unfortunately, I don't have any idea what it means to re-write a "wvwey block with a known-good pattern." Is that something I have to do manually? You stated that the option is in Disk Utility. Is "write zeroes" an option that you can select or is something you have to input manually? Can you break it down in simple terms for me or give me some step-by-step instructions or a link?
I apologize for my ignorance, but (again) I do appreciate your replay and advice as well as that of HackInt0sh.
Thanks.

Tablet PC tx2000 - display and wireless problems

Hey folks. I have an HP tx2000 tablet laptop with a year-from-purchase warranty that expired just last month, and now two serious and potentially debilitating problems have occured. I've spent about four or five hours with the nice people from Livechat, who were patient on the whole and managed to temporarily fix one of the issues.
1) The wireless device cannot be detected - The laptop's wireless card is not being read. This is a big downer for me because I use wireless exclusively at home and work and I really don't want to shell out bucks for a smart card to replace technology on a laptop that is 1 year and 1 month old. The first thing I tried was re-installing Vista. The wireless card was detected and worked just dandy until as soon as I restarted the computer. Then it disappeared from the device manager list. I re-installed a second time and the same thing happened. Livechat directed me to a new BIOS to install, so I installed that, too. The same thing happened. Then Livechat instructed me to remove the HP Wireless Assistant program, and bingo! The wireless worked fine, and through many reboots. For a day and a half. Now it cannot found again.
2) When the laptop enters sleep or hibernation, the display will not 'wake up' again. The fan will hum, the leds will flash, but the display refuses to wake. The only way to solve this is to reboot the computer. This also happens /every time/ I power on the computer cleanly. The display will not activate, no post screen, no system beep a few seconds afterwards. The only solution is to hold the power slider down until the system does a hard shut down, and then click it again to turn the computer back on. This usually works, though sometimes it takes 2 or 3 tries.
The Livechat solution was to update my video drivers, and they sent me a nice handy nvidia update. Upon install restart, the computer behaved normally, but once I restarted again (After wrapping up the marathon Livechat session at 5 in the morning) the blank-screen problem occured. I also tried to install the latest drivers from the nvidia website (which were updated from the ones HP gave me), to no effect.
I've read about both of these problems on various internet boards; wireless failure seems to be a widespread thing with Pavilions and the chipset, though this is a rather unique case in that reinstalling does allow the system to immediately 'find' it and it works fine, and HP Livechat provided me with a working solution where the wireless ran for a day and a half and through ten or twelve power ups/power downs. The screen problem, however, seems very common and is frustrating to the extreme for myself and several others. Many hypothesize it involves the tablet technology. My previous laptop was a Dell Inspiron with a large, 2" diameter hole burned into the screen, and Dell Support wouldn't even talk to me even though they had a uniquely extended warranty for what was a major manufacturing problem. Too bad, I fell short of the 3-year warranty, and they would just shuttle me to a pay-for service as soon as I gave them my tags. I've lost all faith in Dell products as a result. HP, in contrast, has been very civil through the Livechat, and I read up on some of these forums.. it looks as if people know what they're doing here. I don't want to throw away more money on another laptop, and the tablet functions are the bomb. I just want a working laptop.
Cheers,
This question was solved.
View Solution.

Nice, only took 'em 12 minutes to censor my post and remove mention of a certain web site.
To the Hewlett-Packard employees here, how does it feel to have to constantly cull posts on this particular issue day-in and day-out? I think that you guys have a better scope of this manufacturing problem and just how many people it is affecting. Certainly you know how mad they are. I do think your conduct has been fairly civil, but I find it absurd that as representatives of this company you continue to ignore the mounting evidence that we all have bad GPU-equipped laptops.
Then again, you probably can't do much about it, and I'm sure nobody above you is willing to consider the issue at hand and release a public response. I am confident that this arm of HP is ignoring their customers just as much as the other echelons I have visited in my quest to get a free repair.
http://www.hp.com/hpinfo/globalcitizenship/ethics/
From the above, 'Business Ethics' by HP:
'We are passionate about customers; (Sure are!)
We have trust and respect for individuals; (I don't see the respect part, and we no longer hold trust for you.)
We perform at a high level of achievement and contribution; (If achievement == making money by charging repairs to manufactured-defective laptops.)
We act with speed and agility; (On ignoring, buffeting, delaying, and downright covering up this entire mess)
We deliver meaningful innovation;
We achieve our results through teamwork; and
We conduct our business with uncompromising integrity. (Yeah, you sure haven't compromised with the THOUSANDS of PISSED OFF CUSTOMERS in this mess!)
At HP we want to be a company that is known for its leadership in corporate ethics and responsibility. A company where employees are proud to work, and customers, partners and suppliers want to do business with.'
I think HP is irresponsible not to re-address the issue of machines covered by the LWSE. I cannot say anything about corporate ethics here; all it translates into is finger-point-who-started-the-problem. As a customer, I no longer want to do business with HP. I don't know much about their partners or suppliers' feelings on this issue.
However, to the censors:
Is this a company in which you are proud to do the sort of work you do here?

Delay and echo

When I use SmartTalk the people I call complain that my voice is delayed and they can hear their own voice echoed. Do other people have this problem?
It sounds all right at my end, except I do notice people are slow to reply so that I often start talking again at the same time as they are about to reply.

Hi Johnrmorris,
Thanks for posting,
I'm sorry to hear you are having SmartTalk call issues, you could try the steps on the following link to see if it helps improve the connection:
http://bt.custhelp.com/app/answers/detail/a_id/40777/kw/smart%20talk/c/345,6293,6298
Thanks
PaulK
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Audio (and other) problems noted with Keynote version 4.0.1

Since installing Keynote 4 and the 4.0.1 update, I have noted the following situations and/or problems:
1) When doing a "save-as" the filename is appended with the suffix ".key" but when I subsequently "save" this file, the suffix disappears. The file seems to open and operate OK nonetheless, but this puzzles and somewhat concerns me that someday Keynote may not recognize the file. This happens whenever I "save" a slideshow after I have made any changes to it.
2) When playing back a "soundtrack," the audio "glitches" frequently at slide transitions: this occurs repeatedly on my G5 desktop system but not on my MacBook Pro-17. The "glitches" always seem to occur at the same places in the track - which, of course, is also at the same slide transitions. (This problem has spawned several similar questions and threads in this forum.)
3) Related to #2 above, the "glitches" also interrupt or corrupt the "recording" of that soundtrack, so that the synchronization is off when the slideshow is played back.
4) If I want to have an audio track play under a series of slides, the only way I have found to accomplish this is to create a separate slideshow with the audio track running as a "soundtrack" and "record" the Builds and Transitions in sync with the audio. If I want to incorporate several of these shows together, I can create a "master" slideshow and Hyperlink each segment to the next. HOWEVER...
5) When I "record" a "soundtrack" and "synchronize" the Builds and Transitions within the slideshow, everything plays back properly in sync ONLY when the slideshow is played as a stand-alone presentation (i.e. a cold start from the desktop). If I initiate playback of the slideshow via a Hyperlink from another presentation, the soundtrack plays but NONE of the synchronization works at all.
6) The only way I have found to have an audio track "fade-in" or "fade-out" is to use off-line editing software to record these fades prior to importing the tracks into Keynote. The "Start Audio" Build function is simply a hard "cut" in, and the end of the track is a hard "cut" out.
These problems are consistent and repeatable facts. Whether they are "bugs" in the software or "design shortcomings" is uncertain. Nonethtless ...
At the risk of offending the moderators of this forum, I feel compelled to comment that these problems render the audio operations of Keynote less than satisfactory and should be addressed as soon as possible with another update to this visually stunning but audio-challenged application.

Well Ron S, I re-confirmed why I prefer not to look to tech support for support.
It seems to me that support's main function is to deflect any critical comments and push the blame back to the user.
Frankly, I have better things to do with my time and money than try to help a multi-billion dollar enterprise learn about itself.
So, for the benefit of you and the nearly 400 who have followed this thread, I offer you my latest and probably last attempt to have Apple acknowledge in some small way that "Houston, we have a problem".
I expect this reply will result in this thread being yanked as well, since I'm expressing negative thoughts about Apple's product and wishing they would do better, which is a non-technical gasp of utter frustration and disappointment. Note that "product" is singular, defining Keynote. My other Apple products serve me loyally and superbly, which is why my huge disappointment with Keynote.
So here is my correspondence with Tech Support. I've removed names except mine.
I think it speaks for itself. They have notes from my conversations with them that I have current Apple computers, including a MacBookPro, not an old PowerBook, nevertheless, they have told me that the problem is mine because the fabulous hyper-performing Keynote software is choking my poor old machine (paraphrased muchly).:
Hi (support),
That's disappointing news, especially since this test was done on 3 machines: an old G4 400, a 2.0G Dual G5 and an Intel core duo MacBookPro which yielded identical results.
It is not a hardware issue.
I do not accept a brush-off that it is my hardware that is causing Keynote to be problematic.
I will assume that Apple is not interested in addressing these issues in public and that Keynote is substandard software that is in need of re-authoring.
Sorry to be so blunt, but Apple has set this tone with Keynote, and used its considerable reputation as a leading a/v technology innovator to imply that Keynote will deliver the excellence we Mac users have come to expect.
I have been a loyal mac user since the SE series and have enjoyed success with the machines and software offered by Apple, and depend on them for my livelihood. I'm currently using FC Studio6 and know that Apple is capable of maintaining its high standards.
However, Keynote fails to do that, instead behaving like a product that was invented in a teenager's basement and is in beta. I realize that it's not designed as a FCP level product, but it fails at the basic tasks that you advertise it will complete.
A version 4 product should work as advertised. Keynote certainly does not.
I'm deeply saddened that Apple seems to have become an iPod entertainment company, interested mainly in profits from entertainment rather than serious useful technology.
On 2007-Oct-19, at 10:14 AM, (tech support) wrote:
Hello Sir,
Unfortunately, this does look like it's mostly a case of some of the new Keynote features slowing down the performance on the PowerBook.
At this point, there isn't much else we can do in the way of troubleshooting.
If you are not satisfied with the performance on the PowerBook, using the previous version of Keynote is probably his best option at this point.
We will continue to research this issue, but at this point it's unlikely I'll be able to find additional suggestions for improving performance, as it looks like it is is reproducible and limited to older models.
On Oct 16, 2007, at 11:27 PM, Ron Tucker wrote:
Hi (support),
Thanks for your recent followup calls. I'm directing a video shoot so am a bit preoccupied.
Here are the tests I mentioned.
These are as simple as it gets, and I think highlights the synchronization problem with Keynote.
Test 1 is straightforward, and demonstrates that a single unedited recorded audio track will maintain mouse click synchronization.
Test 2 is the same file, but with audio modifications applied to each slide in succession.
This demonstrates a dramatic synchronization slippage.
The visuals occur before the click (and audio) markers. Keynote seems to be create delay in audio at each "record and replace" point. This accumulates as the audio is revised in successive slides.
These tests demonstrate that there is a fundamental flaw in how Keynote handles audio in its most basic application.
This does not address the slim toolset available, such as lack of insert capability and other basic audio tools, which is a separate design issue, and I suppose subject to "request for enhancement" feedback.
I've reluctantly abandoned Keynote for my project work at present until these basic issues are addressed and it can be demonstrated that Keynote can successfully execute its feature set.
<TuckerKeynoteTest.zip>
Message was edited by: Ron Tucker1

Sever delay and cracking noise with guitar

I have my electric guitar plugged into my MacBook via a USB cable. Never had a problem using it until today. Since the last software update (which was supposed to FIX latency) when I use guitar effects in GarageBand there is a crackling noise and distortion, along with a sever delay between between hitting the string and hearing the sound. Anyone have any idea what happened? I changed nothing on my end. Must be in the software update. The delay and distortion and crackling noises are so bad I simply cannot use guitars in GarageBand, much less record them. Help!

Thanks for the reply. My cable is a First Act USB cable that I got at Target:
http://www.amazon.com/First-Act-222-USB-Cable/dp/B001D2GQHU/ref=sr13?s=electronics&ie=UTF8&qid=1297089473&sr=1-3
It worked perfectly until the latest update to Garage Band 11 was released. I strongly suspect it is not the cable, as the cable does not seem to require a driver. The Mac auto detects it. Is nobody else having this problem? Maybe the cable just happened to go bad immediately after the Garage Band update?

Flash player 10.3 (current) causes major sound delays and sluggishness

Dutifully updating the Adobe Flash player as recommended, I ran into the problem that the curren version of it (10.3.187?) causes large delays in sound playback, like 0.5-1s delay before the sound plays that should play, also regular hangups in flash applications (choking). This ruins e.g. flash gaming of any sort.
System: Windows XP Pro on an AMD Athlon64 3700+ (single core), 2GB RAM
I currently downloaded 10.3.181 from OldApps, installed it after removing the current version, and the problem went away; no delays, no sluggishness, no choking.
Any idea what the problem is, and when this is going to be fixed? I'd prefer to be able to run the latest version re: security.

https://crash-stats.mozilla.com/report/index/bp-0a0b872f-5127-4ee1-a355-ca3cb2120721
https://crash-stats.mozilla.com/report/index/bp-9cd87dd7-205f-4844-9e6d-3ce262120721
https://crash-stats.mozilla.com/report/index/bp-8c07c846-b2ed-4535-8db4-4ee072120720
https://crash-stats.mozilla.com/report/index/bp-f29a89ed-f8b1-4a62-ba3e-983e22120720
https://crash-stats.mozilla.com/report/index/bp-e16d2b91-0f7d-4e5a-9e25-255852120718
https://crash-stats.mozilla.com/report/index/bp-1226c709-5f87-41c6-95d3-4310d2120718
https://crash-stats.mozilla.com/report/index/bp-4de2a0da-dd36-4ec8-8e53-c42742120714
https://crash-stats.mozilla.com/report/index/bp-e16d2b91-0f7d-4e5a-9e25-255852120718
https://crash-stats.mozilla.com/report/index/bp-4de2a0da-dd36-4ec8-8e53-c42742120714
https://crash-stats.mozilla.com/report/index/bp-eac1c5a5-2dce-4415-b645-07a1f2120714
https://crash-stats.mozilla.com/report/index/bp-1ede5bd3-8c72-4362-8d79-4f29c2120714
https://crash-stats.mozilla.com/report/index/bp-d4fd5dae-dacd-45f8-9549-2c3702120722
https://crash-stats.mozilla.com/report/index/bp-ca510991-de29-44b3-be02-0255a2120722
https://crash-stats.mozilla.com/report/index/bp-8600c221-3fd3-4eaa-a5af-a602b2120722
With Hardware Accelaration in Flash turned off. Still crashing.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

I am making code to try to make a game and my problem is that my code......

I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
     //Wounding formula
     double sL = 70;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 50;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     rockCrab() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          double done = rint(fH - fA);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
     //Wounding formula
     double sL = 1;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 1;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     self() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
     public static void main(String[] args) {
          self instance1 = new self();
          rockCrab instance2 = new rockCrab();
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM

[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.

Delay and reverb problem!!!!!!

Similar Messages

Maybe you are looking for