Delayed reaction on "Visibility" change

The attached form has a "Specify Other" text field that should become visible when "Other" is selected from the "Role" drop-down list. In practice, when you select "Other", the "Specify Other" field doesn't become visible, but when you make any other selection after "Other", the "Specify Other" field becomes visible. This means that you effectively have to select "Other" twice to be able to complete the "Specify Other" field (which becomes required when "Other" is the selected "Role", whether the "Specify Other" field is visible or not).
https://acrobat.com/#d=N6JAgPgsrSX1D03Nv09oCw
Anyone seen this problem before and figured out how to make it work correctly?

Dropdown selections aren't immediately available as a rawValue - the value doesn't register until you exit the field, so your code should work fine on the Exit event.
You can use xfa.event.newText to get the selected value, so try this as your if statement:
if (this.boundItem(xfa.event.newText) == 6)

Similar Messages

HT1414 I have updated my iPhone 4 with the new update ios7 and now the buttons are on like a delayed reaction. Frustrating when texting. Can't be right. Has anyone else had this.

I Have problems with texting and using the keyboard since going on the new update is07 it's like a delayed reaction when I'm typing

Had you bothered to search this forum before posting (forum etiquette) you would have had the answer to your question "Has anyone else had this?"

Delayed Reactions

I'm running Tiger 10.4.3 on a new G5 Dual 2.7 with 4 GB of RAM. Should be a dream system right? But over the last couple of weeks certain functions in the Finder have slowed to a crawl. Click once on a file icon in the finder and nothing happens for three full minutes. This happens in column view but not in list or icon view, so it seems to be an issue with the system churning on the file info. Same delay when invoking the get info command. A Force Quit reveals that the Finder is not responding. Launching a document opens right away but then there is a delayed "Zooming" of the icon after it has already opened - an annoying delayed reaction. Anyone else having this problem or know what could be interfering with the finder in this way? Spotlight and Find have also ceased to work but that may be a separate problem.
Repairing permissions and the recent OS Upgrade haven't made a difference.
Three-quarters of my hard drive is empty.

As a first step, check Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures (which includes repairing disk permissions as the 2nd of 3) and when doing so, follow all steps/instructions in the order provided.
If this doesn't help or resolve the problems with the Finder, check Finder issues? How to delete its preferences.
In addition and for future reference, check Installing software updates.

Time delay on seeing the changed data onto the webi reports

Hello,
I'm new to BOBJ and was hoping someone can help me with adjusting the time delay the reflects the changed data to the Webi reports.
I have a user that would update a form on our EP. Afterward, she would have to wait a while before she can see the changed data on our Webi reports.
can you please tell me the default time lag and show me where I can change it if required?
thanks.

Thanks for the reply.
Our BO is 3.1 SP4.
We just implemented PBF (Public Budget Formulation) and our forms are running on NWCE server. It's being written to our backend BW 7.01 SP8 server. I was told by our users that after she updates some new information on the form, it takes a while before she can see it on the reports. My understanding was the universe should see the updated data from our BW immediately after they refresh. Just as you both mentioned. But according to the users, its not. there's a time delay.
I'm going to test this myself if there's a delay. In the meantime and suggestion would be helpful.

Switch: delay during the first change of children

Hello,
in my scene graph I use a Switch. This Switch has three children, whereof always one is visible. Depending on the viewing direction, I change the active Child. It works very well, but
there is still alittle problem, when the change between the children is done for the first time. I mean, when i start the program the first child is active. During changing the
viewing direction the second child will become active, in this moment there is a little delay. The same when the third child is activated for the first time. After that the change of
the children works fluently.
I think in the beginning, the other children have to be loaded in the buffer. How can I do this, before showing my canvas?!
Perhaps you can give me some methods, which I should use, that would it make easier.
With kind regards
Gunnar Schroeder

Hi,
I'm sorry I can't answer your question, but do I understand that you are using the SwitchInterpolator to change the View object of your View graph?
I'm looking to do something like that in my game: top view vs. first person view.
Was it difficult, it is just a matter of adding a SwitchGroup to your View graph?
Thanks!

Standard view element visibility change

hi experts,
In a standard component, i need to change the toolbar button visibility property at runtime,
i have written code in post-exit of doint method,but changes are not repflecting in the portal sceen. in the button properties visibility is selected directly.
i have created attribute in the context and changed the value to abap_false.but how to bind this attribute to the button visibility propert. when i directly tried to bind, as this is standard, it is not allowing me to change. when i use replace property attribute..it is showing error that method is protected, so it cannot be used. please advice.
regards,
suneetha

Hi
In post exit of doinit method you can change the binding of visible property by using attribute you have created
Method is BIND_VISIBLE.
Alternatively instead of post exit of init try your code of setting visible property to false in post exit of domodifyview.
Hope this helps
Regards
Manas Dua

Merging Visible changes color of image!?

using original CS
every so often, like tonight, i've got a file with many layers of hue, bright, color balance, and more. i've gotten it to exactly where i want it, and want to move the whole thing in one piece to another file. so i merge visible. 95% of the time the result is a merged image that is identical to what it was in layers.
but sometimes there are slight but important changes to the color or hue. (flatten image also has the same prob a fraction of the time)
what can possibly be the problem here?

ok, i re-did this operation so it merged the way i wanted it to merge, but still i see differences. but NOT when i view at 100%. i did not know that:
>>What you see when you look at an image at any magnification other than 100% are interpolated pixels and not the actual pixels.>>
this is invaluable info--thank you. still, i dont understand why 95% of the time when i merge visible--at whatever magnification--the image looks the same.

SRM PO Header - field visibility change

Hi All,
I am on SRM 7.0 How can I change the visibility of fields on the PO Header. Please help

First you need to check if it can be done from WD configuration. for this right click on the screen, get the configuration name, WD component name and change. Here you can set the fields visibility,
If this is not satisfying your need then you need to do a post implementation on WD component for WDMODIFYVIEW.

Event problem - slow/delayed reaction to keypresses!

Hi all!
Im trying to implement a first person free mouse view with strafe in the game im working on. I use KeyListener interface and my problem is that when I hold down a key it fires a KeyEvent to begin with! Then after a delay of aproximately half a second to a second more event are being fired. It gives really slow reaction - something that I can not use in my game. What to do? If someone has a good fix to this issue please post a little code snippet I can check out.
I wish you all a good day.

It just seems easier to set a bool. true when keyPressed - false when released. And then just run while trueOf course this creates an infinite loop which uses up the CPU resources. Not a very good idea.
Yup, my thoughts exactly (see reply #4).Using a Thread or a Timer is a similiar in concept (much better then the above suggestion), but there are differences.
For example when using a Thread your code will execute then you will sleep for a period of time. So if your code takes 100 milliseconds to execute and you sleep for 1000, then every cycle will take 1100 ms. The total length of time between events will vary between CPU's since the 100ms execution time will vary depending on the speed of your CPU. However, when using a Timer an event will fire every 1000ms whether your processing takes 100ms or 500ms. Which means your cycle time is exactly 1000ms.
Using a Thread you must use the SwingUtilities.invokeLater to update the GUI since the code executes in a non Event Thread. However when using a Timer all the code executes in the Event Thread so you don't need to worry about SwingUtilities.invokeLater. Of course if your code is heavily CPU bound you may need to create a separate Thread anyway so you don't block the Event Thread from responding to events.
But the main point is using a Timer will give you a cycle time of a fixed duration, whereas using a Thread will give you a variable cycle time depending on CPU and duration of executable code.
The choice of implementation is up to the OP.

Odd stuff - recording delay - automatic channel Strip changes

Recently I upgraded my interface from a MOTU 828MKII, to a Metric Halo 2882. I also upgraded from Logic 8 to 9. The problem is, I did this in the middle of a project. This project was/is just a test of a whole new upgrade to my home studio including some preamps/mics/interface/acoustic treatment/etc. Up to this point I mainly recorded my own stuff (5yrs), no big deal. But I'm thinking of moving this into a part time gig. So I asked a some friends if they'd be interested in free recording as guinea pigs.
The first day (Saturday) we tracked drums into the MOTU on Logic 8, as my Metric Halo interface hadn't arrived yet. Everything went good. That Monday, my Metric Halo arrived. I switched out the MOTU, and had the 2882 up and running by Wednesday. Thursday, I installed Logic 9 and updated to 9.1. I had all weekend to work though some of the new stuff, and it all sounded good.
By Monday I had the guitar/singer come by to lay down the rhythm guitar. When we recorded it, with the same settings as in the previous session, although with Logic 8 and a Motu interface, the guitar was around 246 samples late. I adjusted the Recording Delay ahead 246 samples, and it made it slower. I adjusted back 246, still not right. So we called the session.
I've scoured forums, and the only info I can find is plugin latency, and I/O buffer settings. I never had any issue with the MOTU as far as recording delay goes. I had latency issues, but nothing that actually recorded. It was my understanding that, the I/O buffer only affects the monitoring latency, everything "goes to tape" correctly though. I've spent the last 4-5 days trying to figure this out. If I start a new project with the 2882, everything syncs up great, no delay at all. But if I try to add to any project that was started with the MOTU, and Logic 8, I get a recorded delay.
The frustrating part of this is, last night, I updated Logic to 9.1.1, and recorded a loopback click. It worked fine. No delay at all. I tested a bass through the same recording chain I used before, and it was perfect too. I'm not sure if this was a fix in the new update, or I have some other instability thing going on. Any Ideas there?
Also, after updating last night I had a weird problem with plugins that were disabled, suddenly re-engaging. It seemed as though when I would do any changes in the MIO Console, I would come back to Logic, and random plugins would be re-enabled. I'll check tonight if this is repeatable, but last night it was a bother. I also had a Focusrite LiquiMix running at the same time. Maybe this was causing a problem. It did seem to only affect the channel strips that the LiquidMix inserts were on.
Thanks,
Erik

Thanks very much; I'm still perplexed though. You're right, the "mono->stereo" plug-ins yield stereo effects for the guitar; but I'm referring to the pre-assembled "sets" of plug-ins that are accessed by clicking on the word "inserts" (above the various slots for plug-ins). When you click on this word, all sorts of effects-sets are offered: for drums, vocals, pianos, guitars, etc. I'm referring to one for "electric guitar" (under "distorted guitar") called "Angus on SG + MS 1959" (though this is true of the other effects in this same category for electric guitar). Here's why things don't make sense to me: 1) since this effects-set ("Angus...") works just fine if it's applied AFTER I've recorded the guitar dry, why should it NOT work when I'm recording with the effect? I.e., I don't need a special double guitar plug for my Firepod for the effect to work on the signal it HAS recorded; so why should the special double plug be necessary WHILE recording? Meanwhile, 2) given that this is a GUITAR effect (Angus Young playing his Gibson SG through a 1959 Marshall Stack), and guitars always have mono output, then how can it be that Logic, by design, should require users to buy a special stereo plug when using effect-sets specifically designed for guitar? .... That's why I'm perplexed. I do think your two suggestions will work; but it just seems impossible to me that Logic is actually designed to work in this way -- at least not on purpose. On the other hand, I'm a newbie, and I may be missing something that's obvious. Sure would appreciate hearing whether it seems to people that there's a problem with my set-up (or with Logic), or whether the physical stereo-plug solution is actually a well-known practice that I am simply not familiar with. Many thanks!
You have recorded only one chanel on a stereo track.
Use a second input on your firepod or use mono ->
stereo plugins on a mono track to hear them in stereo.
dual g5 Mac OS X (10.4.4)

Why does my firefox have a delayed reaction while trying to type or scrole?

It has a jerky affect and it puts letters when I type in after I type them rather them when I type I type them. Scrolling is jerky and delayed also. I've updated to the lasted firefox so I know that's not the problem. I usually have about 4-6 tabs open at a time and that's when it seems to get worse but not real sure about that. I have a web site so I really need these tabs open if possible.

Closing duplicate thread. Please continue at [/questions/999147]
<b>Added correct link</b>

Dragged image jumps on visibility change

Hello everyone,
I'm dragging a movieclip that has the visibility set to false. I can trace the x and y of the clip and it is definitely where the mouse is. However, when I toggle the visibility to true, occassionaly it flashes on at the last location it was visible, just for a brief instance, before teleporting to the mouse location. How can I fix this?

Normally an object with its visibility set to false will not interact with the mouse, so I have to wonder how you have things set up for that. Regardless of that, does it work better if you control the alpha property instead of the visibility?

E-mail delay using "Event Data Change" in process chain

Hi Experts.
I can´t figure out why my process chain is taking so long to deliver a simple e-mail.
The BEx Broadcast Configuration is working fine. When I run it manually, the e-mail comes instantly. But when I use process chain (Event Data Change), it takes hours to receive the e-mail. The option to run after the infoprovider data change is set for this configuration.
Is there any additional configuration I have to check?
All answers are welcome!
Kind Regards,
TP

Hi Arvind. Thanks for your repply.
I was already checking the SOST and also SCOT and RSBATCH to see if the jobs are running fine, and no problems so far.
How can I check the IDOC´s?
Thanks in advance.
TP

Time machine backups not visible-changed computer name

I found that I could not access any of the Time Machine back ups. I checked and the computer name had an apostrophe in it, also spaces. I changed the computer name to remove those and used ASCII characters only. The was yesterday evening. I still can't see any of the backups, although I've heard the hard drive I use for TM running a couple of times since then.
Does anyone have any thoughts on what the problem might be?

I do not see the backups thru Finder or thru the TM browser. I can get into the Time Machine browser, but the only time period displayed is today. The arrows to move backward and forward don't do anything and the bars along the right side are not labeled with dates or time as they should be. Thanks for any help you can offer.

IPhone 6 with iOS 8.02 delayed reaction after touching a screen item

I can select an item and it does not change immediately, so i press sit again and maybe again. Any thoughts on this?

I have the same problem on my iPhone 6 plus!
I took my phone to the genius bar today because my camera wasn't focusing, and when I got my phone back, after they replaced the camera, the touch id was not working at all. I can't even add new fingerprints, because it keeps saying it failed, yet it won't even let me try to add it. SO STRANGE! My reachability feature stopped working, too.
Also, my wallpaper was blurry, try to reset it and it said it couldn't download the picture from my iCloud. There is also an update available, but I cannot download it because I get an error message.
I tried all the same things you did, and it was to no avail.
Going back to the genius bar tonight.

Delayed reaction on "Visibility" change

Similar Messages

Maybe you are looking for