Delete a column froma  table that is used in multiple interfaces

Is there a way to delete a column from a table where the table is being used in an interface ? The only way I could find so far was to delete the interface, delete the column then recreate the interface.
Otherwise deleting warns that the object is referred to by another object and lists the interfaces.
unfortunately the table in question is being referred to in multiple interfaces, so I'd prefer not to have to recreate all of them.
Many thanks

You can delete all the mappings (source an target) which refer to this column and then physically delete the column.
It's long but maybe better than dropping the whole interfaces using this column.
Regards and Merry Christmas
Brice

Similar Messages

  • Reg:How to delete the column in table control also from database table.

    Hi Experts,
    Once again thank u all for giving the responses.
    one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
    With Regards,
    Saroja.P.

    Hi,
    If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
    "This portion of code inside the LOOP...ENDLOOP.
    IF sy-ucomm eq 'F_DELETE'.
       gt_itab2-check = mark.  " Store the MARK field status into your internal table's correspoding field 'check'
      MODIFY gt_itab INDEX tabcontrol-current_line.
    ENDIF.
    iF sy-ucomm eq 'DELETE1'.
      DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
    ENDIF.
    Now you can modify your database table using the MODIFY statement.
    MODIFY ZDB FROM TABLE gt_itab.

  • How to delete a column from the table control in module pool?

    Hi,
      can any one please tell How to delete a column from the table control in module pool?
    thanks in advance
    warm regards
    HareeshKumar N

    hi hareesh,
    I think it is better to hide it.
    How to hide: You can check this link
    Dynamic Hide column in table control

  • Delete a column from the table

    Hi.
    I would like to delete a column from a table. I want to drop the table and recreate it later. But this table has a primary key which
    is a foreign key of other tables. So after I recreate the table I must recover the relationship of this table and other tables.
    How do I get the information about the primary key of this table as a foreign key of other tables from data dictionary?
    Thanks in advance
    null

    For ur query the reply whay u have got is correct one. For further quries similar to one u had u can download a tool named TOAD (Tools for Oracle Application Developer) from quest site (www.quest.com). Install it a proceed.
    Do let me know how and what u feek about TOAD.

  • Deleting the values from table control

    HI,
    I need to remove the selected line from the Table control on my screen.
    The point is that the Internal table does not have any records,.
    for example in the Customer Create screen,
    while entering the bank details we will enter it in a tbale contraol.
    but the records doesnt exist in the database. but the record gets deleted from the table control only if we press delete button.
    please guide me.
    please note : I want to delete the record from Table Control on the screen and I dont have any corresponding database records..
    regards

    Hi..
    The solution to your problem - deleting values from table control.
    Here: it_wizard is the internal table which is holding the value of table control.
             wa_wizard is the work are of the internal table it_wizard.
             it_delete is the internal table which holds the deleted record of table control.
             wa_delete is the work area of the internal table it_delete
    Also here the field ZSEL is the character field which is used to select the entire record in the table control.
    LOOP AT it_wizard into wa_wizard WHERE zsel = 'X'.
           MOVE-CORRESPONDING wa_wizard TO wa_delete.
           APPEND wa_delete TO it_delete.
           delete table it_wizard from wa_wizard.
    DELETE  FROM zfin_goods WHERE ZFG = WA_delete-ZFG.
    ENDLOOP
    if sy-subrc eq 0.
    Message 'Delete Successful' type 'S'.
    endif.
    The above code will delete the record from both the table control.internal table and the database table.
    I think this will help you to great extent.
    Ward regards,
    Bhuvaneswari
    Edited by: BHUVANESWARI THIRUNAVUKKARASU on Jan 7, 2009 10:39 AM

  • XML Column from table extract to Pipe Delimited Text File

    Hi,
    I have an XML column with large data in a Table ( Source SQL server Database).
    I was asked to   extract    XML column to .txt file using SSIS.
    Is it possible to extract xml column with huge data to text file ?
    when I tried,  select XML column from Table in source , I noticed  that Property of column is taken as [DT_NTEXT] . I Converted it to DT_TEXT as Ansi donot support DT_NTEXT.
    Execution method was success but it failed due to trucation. so wondering is there a way to get XML column extracted to Pipe delimited text file?
    Is it advisable to do this ? or IS It Valid to export XML in Pipe Delimited File ?
    Please Kindly advice
    thanks
    kodi

    Are you looking at shredding data within XML nodes and then importing it to text file or are you looking at exporting XML value as is? Also is SSIS a necessity?
    If not, You can simply use T-SQL for this along with bcp for this. just use a query like
    EXEC xp_cmdshell 'bcp "SELECT CAST(XMLColumn AS varchar(max)) AS Column FROM table" queryout <full file path> -c -S <ServerName> -T -t |'
    provided you use trusted connection (windows authentication)
    see
    http://visakhm.blogspot.in/2013/10/bcp-out-custom-format-data-to-flat-file.html
    If you want to shred the data use Xpath functions in the query as below
    http://visakhm.blogspot.in/2012/10/shred-data-as-well-as-metadata-from-xml.html
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Delete an entry from table T527X.

    Hello Gurus,
    How can we delete an entry from table T527X from se11/se16? Or is there any other transaction by which we can delete this entry? I can not delete the org unit as this org unit is not having any name and the ID is: 00000000. I created this entry using SE11 -> utilities -> Create entry.
    Thanks,
    Chakri.

    When you say select the entry or you double clicking?
    You can try this.. simply select the check box against that entr in the displayed list and then use the menu option Table Entry--> Delete
    Other than, this I can't think of another option.. ofcourse you can always have  a simple custom program  with a couple of lines of code to delete a table entry.
    ~Suresh

  • How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

    How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
    I tried to use the attached command through TERMINAL :
    sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
    sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
    Use -help for a list of options.
    But i didn't work as I got the above error message.
    best regards
    Jeroen

    I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job).  What I think we need is the Education Volume Purchasing Program
    http://www.apple.com/education/volume-purchase-program/faq.html
    Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software.  (The AppStore icons still show as needing the updates, and the version info reports the old version.)  The documentation is also vague about which AppleID to use in which circumstance.  I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers.  When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install.  We did!  But they appear to have no way to enforce it.
    So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

  • Can't create table that grows using the button object

    Im a beginner, and this seems like a simple issue. Appreciate your help in advance.  When I try to do this, the button fails to add a row.
    So, I printed out the Help section entitled, "create a table that grows using the button object" and started from scratch with a simple table as the only object on the form- and followed the instructions to the letter.
    When I go to preview and click the button, a row is not added.
    Can you suggest something?

    Try this:
    Select body row of table from hierarchy palette that you want to repeat then on he object tab of the properties tab select binding tab. You need to click on "Repeat Row for Each Data Item"
    I hope this helps
    Murat
    www.muratkuru.com.tr

  • Cannot drop column from table owned by SYS

    Hello everybody,
    How can I drop a column of table which is owned by sys? thanks!
    Result as follows:
    SQL> ALTER TABLE HELLO_TB DROP COLUMN NUM;
    ALTER TABLE HELLO_TB DROP COLUMN NUM
    ERROR at line 1:
    ORA-12988: cannot drop column from table owned by SYS
    newbie v

    You can not 'change' the ownership.
    You can, however, 'move' or 'clone' most objects by exporting and importing. As follows:
    I create a table under SYS (shudder).
    I then export it
    - using userid SYS in this case,
    - under normal circumstances I'd either use a DBA account or the owner's userid
    - since I want a table, I use the TABLES option - a list is comma separated and in quotes
    I then import it using a 'userid' switch - fromuser & touser options
    - in this case from SYS to HR
    Finally, I verify it was transported.
    Actual console session in Linux follows:
    pop2@fuzzy:~> sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 10 19:58:01 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> create table test1 ( x1 number );
    Table created.
    SQL> insert into test1 values (2);
    1 row created.
    SQL> select * from test1;
            X1
             2
    SQL> Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    pop2@fuzzy:~> exp file=exp.dmp tables='TEST1'
    Export: Release 10.2.0.1.0 - Production on Fri Mar 10 20:00:07 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Username: sys/????? as sysdba
    Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Export done in AL32UTF8 character set and AL16UTF16 NCHAR character set
    About to export specified tables via Conventional Path ...
    . . exporting table                          TEST1          1 rows exported
    Export terminated successfully without warnings.
    pop2@fuzzy:~> imp file=exp.dmp fromuser=sys touser=hr
    Import: Release 10.2.0.1.0 - Production on Fri Mar 10 20:00:44 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Username: sys/????? as sysdba
    Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Export file created by EXPORT:V10.02.01 via conventional path
    import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
    . importing SYS's objects into HR
    . . importing table                        "TEST1"          1 rows imported
    Import terminated successfully without warnings.
    pop2@fuzzy:~> sqlplus hr/hr
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 10 20:00:57 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> select * from test1;
            X1
             2
    SQL>The export/import pair are incredibly powerful - and few people understand them well. If you are interested in digging into their capability, check out their chapters in the Utilities manual (under the Books tab) at http://www.oracle.com/pls/db102/portal.portal_db?selected=1

  • Reduce Size or delete unwanted entries from tables AllDocStreams,AllDocVersions,EventCache,EventLog of Sharepoint 2010 content database

    Size or delete unwanted  entries from tables AllDocStreams,AllDocVersions,EventCache,EventLog  of Sharepoint 2010 content database:
    We using  powershell  scripts to migrate data between   two  sharepoint  2010 sites .
    While  doing migration  we  delete all  document libraries  & list  form  destination  site  and then run  powershell to migrate data from  source to destination. We following this  process
    twice in a week.
    But in doing  so  we found the above mention tables (AllDocStreams,AllDocVersions,EventCache,EventLog ) of destination Sharepoint Content database  are growing at an alarming rate. 
    Wish to know  how  could get rid of  unwanted  data stored in these tables.

    Hi,
    This is old thread but here is your answer for some of the tables you mentioned
    http://blogs.msdn.com/b/sowmyancs/archive/2012/06/29/alldocversions-amp-alldocstreams-table-size-after-upgrading-to-sharepoint-2010.aspx
    Cheers

  • Change dimension and update table that was used in the AUTOBIND

    Is there a way that I can update the definition of my dimension by adding a column and
    have it update the definition of the table that was used in AUTOBIND without destroying all my constraints to the table.
    I just want to bring over the new coulmns.
    This is in 11gr1
    I guess if I have to I can change the dimension to manual and then perform the binding manually.
    Is this the only way.
    thanks
    greG

    yes, that is the way to do.
    Alter the table to add new columns
    Alter the dimension to add new columns ( change storage type to manual)
    manually connect the dim to table
    rgds
    Mahesh

  • A way to find as to a variable from table TAVRV is used in which program?

    Hello Experts,
    Is there a way to find as to a variable from table TAVRV is used in which of the variants and in what programs. Example: can we find a variable ZZ_AAAA_ACTUEL (from table TVARV) is used in which variants / programs?
    I want maintain one variable and i will be sure that not affect others programs.
    Regards.

    Hi Salhi
    open your table in SE11 and click on that variable, then there is a option 'where used list' in your application tool bar
    click on that option, it will give you a small pop up window from where you can select in which options you want to search for that variable.
    i hope this will work for you
    Thanks
    lalit Gupta

  • I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.

    I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.                                  

    None of us here, nor Apple, can help you.

  • Is there any way to delete songs directly from my iPhone without using iTunes?

    I'm trying to delete music directly from an iPhone 4 in iTunes on the device rather than using my laptop to delete and then sync it. Is there any way to delete music completely from my phone without using my latop?

    I tried this, firstly de-clicked the title in iTunes and syned with my iPhone4 but the title is still there on the phone. so deleted the title from iTunes and re-syned but alas the title is still there.
    any ideas?

Maybe you are looking for