Delete classification view of a material
Hi ,
can anyone let me know how to delete a classification view of a material.
Regards,
Chandan
Hi srinivas,
i tried this FM and the classification view of the material is not getting deleted, can you please let me know how to use this?
thanks in advance ,
Chandan
Similar Messages
-
Creating classification view for the material
hi friends,
i need to create a material with various views (as in MM03) based on the material type.
i am using BAPI_MATERIAL_SAVEDATA for it.
i am able to create almost all the views except the the classification view for the material.
can anyone help me with code (i need to write) to create a classification view for the material?
thanks in advance.Hi Karthik,
Select klart from AUSP into table t_ausp where OBJEK = wa_final-matnr.
LOOP AT t_ausp.
w_classtype = t_ausp-klart.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
classtext = 'X'
classtype = w_classtype
language = sy-langu
object = w_object
objecttable = 'MARA'
* no_value_descript = w_no_value_descript
change_service_clf = 'X'
inherited_char = ' '
change_number = ' '
TABLES
t_class = t_class
t_objectdata = t_objectdata
i_sel_characteristic = i_sel_characteristic
t_no_auth_charact = t_no_auth_charact
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
LOOP AT t_class WHERE class IN s_class.
CLEAR : t_allocvaluesnum,t_allocvalueschar,t_allocvaluescurr,
t_lreturn.
REFRESH : t_allocvaluesnum,t_allocvalueschar,t_allocvaluescurr,
t_lreturn.
w_classnum = t_class-class.
* Getting the reference tables and values----------------
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = w_objectkey "Old reference Material
objecttable = 'MARA'
classnum = w_classnum
classtype = w_classtype
* unvaluated_chars = 'X'
TABLES
allocvaluesnum = t_allocvaluesnum
allocvalueschar = t_allocvalueschar
allocvaluescurr = t_allocvaluescurr
return = t_lreturn.
* Create with reference-----------------------
w_objectkeynew = wa_inputfile-to_matnr.
CALL FUNCTION 'BAPI_OBJCL_CREATE'
EXPORTING
objectkeynew = w_objectkeynew "New Material
objecttablenew = 'MARA'
classnumnew = w_classnum
classtypenew = w_classtype
TABLES
allocvaluesnum = t_allocvaluesnum
allocvalueschar = t_allocvalueschar
allocvaluescurr = t_allocvaluescurr
return = t_lreturn.
ENDLOOP.
ENDLOOP.
Prabhudas -
Characteristic in classification view for a material in MM03
Hi All,
how to get value assigned to a characteristic for a given class and characteristic in classification view for a material in MM03 transaction ?
Thanks,
Rakesh.Then
i have tried and it worked fine
you should also try
Go to MM03
go to classification view of your material
chhose the class type you want to view
and then from Enviroment
Choose Change documents
Regards -
Deleting QM View in the material master
Hi
Is their any way we can delete the QM view in the material master , once it is created
Thanks
JJHi
Deleting a QM view is not possible
what You can do ...is Deactivate all Inspection Types that you have assigned by QA08
or do mass changes using MM17(MARA & MARC) and remove all fields.
It is as good as removing QM view.
Note:
u can set deletion flag at plant level or client level. ONce u do that u can delete that particular material from that plant using sara transaction . But note that all view at that plant level vl be get deleted
so better to make it blank
Regards
Sujit S Gujar -
Merging Basic data View and Classification View in Material Master
Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar BaddelaHi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT -
Deletion of view in Material master
Hi all I have created Classification view for one material by mistake . As I dont want this material to be manage by batch I want to remove/ delete/ deactivate that view . How I can do this
I hope when you are trying to deactivate the checkbox it isn't letting you to do so.At the same time you will find that in the same screen itself at top DISPLAY ERRORS tab is appearing.Check that tab and you will find out the reason yourself of why the system isn't letting you to do the activity.
regards,
indranil -
Creation of Classification View in Material Master
Hi,
I need to create Classification View for a Material. The user would provide the data in the file, example
Material Number MATNR
Class type TCLA-KLART
Class Type description TCLAT-ARTXT
Class Group TCLG-KLAGR
Class Group Description TCLGT-KTEXT
Class M_CLASB-CLASS
Class Description M_CLASB-CSCHG
Status RMCLF-STATU
Std class RMCLF-STDCL
Characteristics Group TCMG-ATKLA
Characteristics Group Description TCMGT-ATKLT
Characteristics RCTAV-ATNAM
Characteristics Description CABNT-ATBEZ
I read in the posts there is BAPI_OBJCL_CREATE. But I am not able to Map the above fields to pass to this BAPI.
Can someone please suggest me how to do this..
Thanks and Regards,
VanessaHi,
Thanks for the suggestion. But i want to do this through a program. There is a selection screen with 6 radio buttons based o view to be created and an input field for the filename.
Could you provide me any BAPI to do the same.
Thanks and Regards,
Vanessa -
Report: Classification view of material master
Hi,
We have activated Batch management for materials.
But for certain material codes, users have not maintained the Classification view.
Is there any report by which we can knowu2019 whether classification view for the material have been maintained or not?Hi,
Check with MM50 with Maintenance status as C
Regards,
Biju K -
Batch Determination in SD - Need for Material Master Classification View
Hi!
Is it mandatory to have the classification view of the material maintained to enable expiry date based batch determination at delivery creation?
I have configured BD for the delivery. When testing with a material for which the classification view is maintained, the batch is determined. When testing with a material for which the classification view is <b>not</b> maintained, the batch is not determined.
Appreciate that this may seem like a strange question given what the testing shows but I am working with a colleague who is adamant that the classification view on the material master is not required.
Any casting votes would be much appreciated and rewarded accordingly. Thanks, DuncanClassification of batches is mandatory if you want to use the batch determination feature.
source: http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm -
Creating Classification view for material through Standard Function
hi,
I have created the material code through BAPI_MATERIAL_SAVEDATA. For quality inspection i have used BAPI_MATINSPCTRL_SAVEREPLICA. i have to create classification view for that material code. Can anyone suggest me which standard function helps me to create the classification view.
Thanks in advance.
Senjeyhi,
i have tried that function module. I have mentioned the code below.
i_object = '000000151860630000'.
i_alloc_num-CHARACT = 'THICKNESS'.
i_alloc_num-VALUE_FROM = '5.70'.
append i_alloc_num.
i_alloc_char-charact = 'SHAPES'.
i_alloc_char-VALUE_CHAR = 'PLATE'.
append i_alloc_char.
clear i_alloc_char.
i_alloc_char-charact = 'CATEGORY'.
i_alloc_char-VALUE_CHAR = 'CS'.
append i_alloc_char.
clear i_alloc_char.
CALL FUNCTION 'BAPI_OBJCL_CREATE'
EXPORTING
OBJECTKEYNEW = i_object
OBJECTTABLENEW = 'MARA'
CLASSNUMNEW = 'RAWMATERIAL'
CLASSTYPENEW = '001'
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUM = i_alloc_num
ALLOCVALUESCHAR = i_alloc_char
RETURN = i_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.
But i am getting the error 'Assignment exists and is valid '.
Please help.
Regards,
Sengathir.J -
CLASSIFICATION VIEW / MATERIAL MASTER
HI EXPERTS,
I am facing a problem regarding classification view of a material master.
In my organisation for a perticular material type I have to maintain CLASSIFICATION view. But by mistake I forgot to maintain classification view of some material.
There are more than 1000 material , so it is not possible to check each material individually and if classification view is not maintained that I have to maintain it.
Kindly reply me with some standrad method, so that I will check for which material classification view is maintained or not. According to that I will proceed.
Regards.
raghu.MM50 is the way.
If you didn't add the classification for a material then you have to extend the material with the classification view. If you enter Maintenance Status C and your material type, it will lsit all materials that DO NOT have a classification view created.
If however, you created the classification view, but didn't enter one of classification values, this will not help. You could try the tools in Classification System --> Environment -->Reporting.
Rgds
Richard -
Classification Data Creation for Material Master Record
Hi all.
I've a batch that update material master record with a Bapi "Bapi_material_savedata". After Material creation or changing we also need to insert or to change a classification data in the classification view of the material master record.
Is there a function module that could be useful to update the classification data of a material?
Thanks
CarloHi Ravikumar,
I tried to use the function module, but it doesn't works well, is it necessary thet material must have the Calssification view already set on?
Thanks
Luigi/Carlo -
Classification view creation via LSMW for Material master
Hi,
We are planning to have an LSMW for creation of material master along with classification view for configurable materials.
Though we see a flag to indicate classification view - XEIC1 Indicator: take Classification view into account
We do not see a structure where in we can pass all the characteristics and the corresponding values.
Is this something possible only with BAPIs such as -> BAPI_OBJCL_CREATE after creation of other view for that material.
Regards,
HRHi,
Thanks for the response. This is helpful.
However, we were intending to use a single LSMW for creation of all views of material master including classification view. Right now we are using Program RMDATIND as direct input method in LSMW.
Please let me know if there is a way to use single LSMW for creation of all views of material master.
Thanks
HR
Edited by: Hema Rao on Jan 8, 2009 7:58 AM -
Purpose of maintaining classification view in material master
Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang -
Data for Classification View in Material Master
Dear all,
Can someone tell where the data for classification view is stored ??
We are running a BDC and need to check whether classification view is maintained or not ??
Thanks in Advance
Regards,
Vivek KHi,
Check the table MARA, there is a Field VPSTA. in this field the Material views will be stores with single charecters. so check for the Clasification view charecter
also it's PSTAT in MARA and MARC.
Work scheduling A
Accounting B
<b>Classification C</b>
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
Regards
Sudheer
Message was edited by:
Sudheer Junnuthula
Maybe you are looking for
-
"Cups" problem with HP printer
My HP LaserJet P1102w printer is not printing PDFs. I have consulted with HP. After several experiments, HP recommends that I ask Apple. The HP clerk says that my "cups" is not working: "The Cups isn't processing the PDF file, which is causing t
-
After it messed up the prior version How do I get firefox 4 to install on my Macbook Pro?
I have a new MacBook Pro. I successfully transferred my Firefox and Thunderbird from the old laptop. Then when the 4.0 version appeared on my screen, I tried to download and install. Now I can not open Firefox from the dock. It says you don't have pe
-
Select-options in Selection Screen to show more rows for entering values
Hi all, In my webdynpro abap I have added the SELECT-OPTIONS componenet and working fine. User need in the Selection Screen for select options more rows to show entering values in single time. THe Default Rows show only 5 . user need to change to
-
No item exist in uwl after delpoying uwl custom connector
Hi,gurus, I'm developing a uwl custom connector now ,but after successfully deploying par file into portal,there are no items in uwl.We have regeisted the connector,and the connector status in uwl is successful.Below is the code of getItems(..).We di
-
Are the two Promise T3 Sata II ports usable for normal sata drives on my K9A2 platinum ? I am a little confused by the designation in the specs which says: "2 SATA II (5~6) ports by Promise® T3, support SAS ready devices, for storage devices only" Wh