Delete cost element in KP06 planning

Dear all,
I am facing the issue in cost run:
Our scenario is like below we done cost element planning for cost center activity type cost element combination(kp06) due to mistake user defined the cost element which is not relevant for activity price calculation after that i run the plan price calculation(KSPI) here i found the warning  message  "Cost element is not assigned to cost component structure, if i will ignore this message my cost component view and itemization view won't match. So i deleted the cost element value from KP06 , but when i execute the kspi same message is appeating.
1) Please advise me how to delete the cost element from kp06 resulting it wont appear in kspi.
Regards,
Ravi.

Hello Ravi,
I repeatedly used the following programms Ajay might refer to.
First guess: xx29 might help.
"Best practice?": I would not call it best practice. At least it is SAP-reports and not
customer-specific reports.
I hope it helps.
With kind regards
Thomas
RKPLNC18
RKPLNC19
RKPLNC25
RKPLNC27
RKPLNC23
RKPLNC29
RKPLNC39

Similar Messages

  • BAPI for  ""Change Cost Element / Activity Input Planning ""

    Hi
    Is there any BAPI for  ""Change Cost Element / Activity Input Planning "" ( TC KP06) as there is BDC for that but is goes through lot of steps . ( TC OKKS, KP04, KP06 )
    So if any one know the BAPI for the same please let me know,  and if possible send me your code also it will be really help full.
    Regards

    o   OBJECT_INDEX - Index uniquely identifying the row and thus the           
        object. The index must be greater than zero and may only appear once     
        in the table. If the index does not exist in INDEXSTRUCTURE, the row     
        is ignored.                                                                               
    o   COSTCENTER    - Cost center that includes the activity.                                                                               
    o   ACTTYPE       - Activity type that includes the activity. You must       
        fill this together with COSTCENTER. You only need it for an activity     
        input that is activity-dependent.                                                                               
    o   CO_BUSPROC - Business process that includes the activity.                                                                               
    o   ORDERID       - Order that includes the activity.                                                                               
    o   WBS_ELEMENT  - WBS element that includes the activity                                                                               
    You may fill one object only,for example COSTCENTER, CO_BUSPROC,             
    ORDERID, or WBS_ELEMENT.                                                     

  • Cost element/activity type planning upload

    Hi,
    When doing the cost element/activity type planning upload via KP06, can I assign only one characteristic in the element definition level?   Because I want to put in the excel upload layout  the cost elements, cost centers and activity types.  But ECC 6.0 is allowing only one characteristic in the element definition level.  Has anyone encountered this problem?
    Thanks and best regards,
    Thess

    Hello,
    This is controlled by planning are in your planning profile. You need to use "Cost ctrs: Cost element/activity inputs" planning area for this purpose.
    Hope you are conversant with Integrated excel upload.
    To do integrated excel upload of cost center plan data.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Manual Planning User Defined Layouts - Create your own layout or copy from standard layout and change it.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Define User Defined Planner Profiles
    Copy the SAPALL to ZSAPALL. You cannot change SAPALL as it is standard.
    In ZSAPALL planner profile, select proper planning area and enter your layout.
    Tick Integrate Excel.
    Once the popup for KP06 comes, you need enter the data and save it. It would generate the file name.
    With the same file name you need upload the plan data by using KP06.
    In KP06
    Extras ==> Excel Planning ==> Upload
    Select the file as prepared in accordance with format at the time of generating the file name.
    Hope this solves your problem.
    Please let me know if you need futher help.
    Regards,
    Ravi

  • To delete Cost Element that already has posting.

    Hi,
    I need to delete Cost element that already has posting. I used KO04 error msg. KS133 Deletion is not possible (depend records exist in table COEP). Cummulative balance already zerorise.
    Thank you.
    Moderator: Please, search SDN

    Hi, it's better not to use in productive.
    See here IMG-Controlling-General Controlling-Production Start-Up Preparation-Delete Test Data-Delete Transaction Data  and then Delete Cost Elements

  • How to delete cost element name from group after deleting the cost element

    Hi,
    Please let me know how to delete the cost element number  from the Cost element group hierarchy.I have deleted cost element but still showing only the CE number---no valid master record.If I d not want this to be visible within hierarchy let me know what should I do.
    Thanks

    Hi
    Go to change cost element group select the cost element click on select tab (3rd Tab from Left) it will take u to new screen in that screen select remove tab (1st tab from left)
    Regards
    Sandesh

  • Delete Cost Element after Plan data posted

    A user created Cost Elements in error and posted fiscal 2010 Plan data, however the business users wish to track these particular accounts by profit center, not by cost center.  We'd like to delete the cost elements so users will not be prompted for cost center when posting to these accounts.
    But even after reversing the plan data, we are not permitted to delete these cost elements with KA04, - hard error cites records existing in Table COSP.
    Thanks in advance for your suggestions.

    Yes, you can't shorten the validity to exclude the posting data from the system, even though you made the balance zero by posting off-setting entries to that particular cost element.
    Yes, shortening the validity works the same way as deletion.
    Hope this helps.
    Edited by: Pradeep kumar Athmakur on Feb 5, 2010 11:16 AM

  • Delete Cost Element which has a posting

    Hi,
    How do I delete a cost element which already has a posting in it?
    Thanks,
    Teo

    HI Eli Klovski,
    Your solution is:
    The cost element should not be deleted after actual/planning data is put on it. You can prevent further posting on it in various ways, but you won't be able to delete it.
    Can you tell me how to prevent further posting to cost element but it should be posted in FI
    Suggest me please.
    Raju

  • Delete Cost element group

    Hi Gurus,
    I would like delete a cost element group by KAH2. When I try to delete it, the program tells me that is being used in a report.
    I use the feature "Extras -> Where-Used list for group" to find the report in which I am using the cost element group.
    I go to modify the report painter by GRR2 to see in what line is using this cost element group, but I can`t find any line of the report, or in General options of this report, where is using this cost element group.
    It seems that the report is not using this cost element group, however I can not erase, because it always brings me to this report.
    Someone can help me?
    Thank you very much.

    Hi
    You  can remove the cost elements from Cost Element Group just select the cost element Group(Tcode:KAH2) then select the cost element that time the cost element becomes in red colour then right click on it & click on remove (F5).
    Then you can reassign the cost element if required
    Please check & confirm the same
    Hope this will solve your problem
    Regards
    Praveen PC

  • Delete cost element o reconcile FI-CO

    Hi guru,
    I have the following problem.
    I have posted a document in november with a G/L account that I haven't created cost element.
    I have created the cost element in december and, succesively, posting another document.
    Now, I can't delete the cost element.
    Is there a way to reconcile CO with the FI posting that I made in november?
    Thanks in advance
    regards

    Hi Sridhar,
    I think OKBA is to transfer the document to SPL (Special Purpose Ledgers) and I don't think it is possible to transfer the data so as to create the cost center line items.
    Please let me know your inputs.
    Good Luck!!!!!
    Thanks and Regards,
    Bhuvaneswari.S

  • Delete cost element

    Hello Everybody,
    I try to delete a cost element with T KA04 in batch method, but it is more than a day since I executed and it is still going on.
    Do you know if this is right?
    On the other hand, I try to do this because a user created a GL account, then they made a posting in this account (without a cost center), and finally this GL account was created as a cost element. After this process, they realized the posting was wrong because a cost center has to be used.
    Do any of you know how to deal with this problem?, how to delete the cost element or reverse the document they posted?
    Thanks in advance.

    Hi Israel,
    Once a value is posted to a G/L account or a Cost Element, you cannot delete the same. You can only block the same so that no future postings happen to these.
    You can reverse the document posted using the T Code FB08.
    Let me know if this solves your issue.
    Regards
    Sridhar

  • Bapi to delete cost element in KAH2

    Hi all,
      anyone knows which is the bapi/function module that deletes any cost element at any group? Like it is done in transaction KAH2?
    Thanks in advance,
    Carlos.

    Thank you so much Ganga!
    The first one is working fine althought the cost element is not removed from table SETLEAF and it is still appearing in KAH3, but now with the message ">>> No valid master record", but it's the same as standard does.
    Thanks again!
    Carlos.

  • Delete cost element o reconcile FI-CO (2)

    Hi guru,
    we have the following problem:
    We posted a document (posting date "26.11.2007") with two account (X, Y) just created like a cost element in November 2007(validity date "01.01.2000 - 31.12.999) and another one account (Z) not created like cost element in November 2007.
    In December 2007 the account (Z) has created like cost element and we posted in same period others FI documents with account (Z).
    Now we want to transfer the document posted with posting date 26.11.2007 and with account (Z) in CO module and we executed the following actions:
    OKBA transaction but is not possible
    KA04 transaction but is not possible because there are document posted on the (Z) account in December
    Is there another way to resolve this issue?
    Thanks in advance
    Regards

    Hi Sridhar,
    I think OKBA is to transfer the document to SPL (Special Purpose Ledgers) and I don't think it is possible to transfer the data so as to create the cost center line items.
    Please let me know your inputs.
    Good Luck!!!!!
    Thanks and Regards,
    Bhuvaneswari.S

  • Error while uploading cost element planning data into KP06 transaction

    Hi,
    I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
    We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors  when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
    Error accured when generating data for the planning processor
    Messange no.K9400
    Revenue element 451000 can not be planned on cost center 9720
    Thanks
    Kishore

    The cost element which have  category 01 only can be planned in the Kp06.
    Regards
    Ranjan

  • How & Where can we do Revenue Cost Element Planning

    HI,
    We need to do planning for Revenue cost elements. How & Where can we do Revenue Cost Element Planning.
    Generally we will do excel planning upload for Cost Elements in KP06. But where can we do Excel plannin for Revenue Cost Elements in the system?
    Kindly provie me the transaction code and some inputs on how can i proceed.
    It would be a great help if any one can respond on this.
    Thanks
    Kishore

    Hi Kishore,
    We can plan Sales Revenue through T-code KEPM-Edit Planning Data or through T-code KE13N by Uploading CO-PA-Sales Plan in Quantity and Revenue terms. Here we have to set  different Plan Layouts for Quantities and Revenues. After successfully uploading the data file,  we have to transfer the Sales Plan data to SOP in T-code-KE1E.  Then We can check the values by Co Code, Plant, Product-wise and Customer  in T-code KE25-Display Plan line items.
    Regards
    appalas

  • Cost element missing form screen KP06

    Hello everyone,
    I am doing ABC costing and while making a posting on screen Change cost element/ Activity input planning which is KP06 transaction code i cannot find boxes for cost element where i can take multiple cost element and more over when i m entering in item overview screen with cost centre & activity types i can see one of my cost element. But i cannot include cost elements  at KP06 screen.
    Can anyone help me out Please.
    Thanks,
    Mohammed samiuddin.

    Mohammed,
    Check the layout you are using while entering the data in that transaction. Typically you can see the layout  that you are in at the top of the screen. Usually SAP defaults to layout 1-101 which have the option to enter cost centers, activities and cost elements.  Use the icon left and right arrow (Previous layout and Next Layout) located under the title of the transaction KP06 to change it. If you still can't find any that fulfills you requirement, I am afraid you may have to create a new one in the customizing (CO Manual Planning)
    Hope this helps.
    GG

Maybe you are looking for