Delete cost run & reset release for current month

For our client we have created a new plant while testing this plant user created a material and they have done a cost run in ck11n with costing varient zv01 but in they released the cost with costing varient ppc1 with this system got inconsistency and not not allowing to release cost for any other material in the current month if we try to mark it for next month it is working fine.
we deleted the cost run through ck44 & ckr1 then also we are faceing the same problem. Kindly give me the solution how can i reset the release and later i want to run the ck11n & ck24 for material in the current month to do the production cycle. please consider this is as a urgent.
Regards
Chakravarthy

Hi
Whether you should do MR21 or not ??
a. If the cost estimate you reversed belongs to Last month and you are going to post the GR in last month then you should do MR21
b. if the cost estimate you reversed belongs to may and GR will also be posted in May - No need for Mr21... Because, even though you release cost on say, may 2nd, the cost always gets released from the Start of the Month
br, Ajay M

Similar Messages

Delete Costing Run through CK44

Hi,
Please guide me on the below issue:-
If I want to delete other than CURRENT and PREVIOUS Costing Run, is it any inconsistency arising in the future.
Please give me clarity on the above issue.
Thanks in advance.
Best Regards
Srinivas

Dear Srinivas,
Yes , there is a inconsistency if any cost difference happen. Otherwise there is no effect.
Once you delete costing run for the past period , then you have to run reorganization of cost estimates using the transaction code CKR1.
Then you have to do costing run using transaction code CK11n.
In case STD Cost has been changed with current costing run .
Then you have to cancel MIGO with document number .
The difference amount go to PRD A/c.
Thanks
Veeru

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

Archiving cost center line items for current period

Hi,
I was not able to archive & delete the cost center line items for current period.I was succesfull in deleting the past line items of the last periods.
Raj

Hi Rajesh,
I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
Check the following links:
For Archiving
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

SapExit for Current month

Hi,
We have a scenario where we run the query monthly, expectation is the query should automatically default to using the current month. So do we have any sap exit for current month.
Regards,
Ravi

Hello Please refer the following code
MTD / MTM(For current default Month)
Variable: ZP_X_09 For enetered month (on 0CALMONTH)
For current Month by default or for any given Month (For full month)
e.g. If current month/given month is 15.08.2009. It will give Aug-09.(200908)
WHEN 'ZP_X_09'.
    IF i_step = 1.
      w_fm_month = sy-datum.
      CLEAR l_s_range.
      l_s_range-low    = w_fm_month.
      l_s_range-sign   = 'I'.
      l_s_range-opt    = 'EQ'.
      APPEND l_s_range TO e_t_range.
      CLEAR : w_fm_month.
    ENDIF.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'ZP_X_09'.
        CLEAR l_s_range.
        l_s_range-low    = loc_var_range-low.
        l_s_range-sign   = 'I'.
        l_s_range-opt    = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
      CLEAR : w_fm_month.
    ENDIF.
Regards,
Krunalkumar Rathod

Sales report for current month and year a go month

i could you please guide me builting report for current monthwise for current month and year a ago month
report parameter month_year='06-2010'
tables = sales and below are the table fields
customer_id
invoice_dt
invoice_am
thanks
nhm

Okay, Still you did not mention how you will pass value in report while generating.
Anyway the query with UNION ALL will work. For Example.
I am assuming that the parameter for date/month you will pass in range like 01-JUN-2010 to 30-JUN-2010
SELECT customer_id, SUM(curr_value) curr_value, SUM(past_value) past_value
FROM
SELECT customer_id, NVL(SUM(invoice_amount),0) curr_value, 0 past_value
FROM sales
WHERE invoice_dt BETWEEN :P_FROM_DATE AND :P_TO_DATE -- here P_FROM_DATE and P_TO_DATE will be the date range for current year as i showed above.
AND -- Any Condition goes here...
GROUP BY customer_id
UNION ALL
SELECT customer_id, 0, NVL(SUM(invoice_amount),0)
FROM sales
WHERE invoice_dt BETWEEN ADD_MONTHS(:P_FROM_DATE,-12) AND ADD_MONTHS(:P_TO_DATE,-12) -- This add_months function for the previous year same month.
AND -- Any condition goes here...
GROUP BY customer_id
GROUP BY customer_idNow using the above query you can design the tabular report as you showed the format.
-Ammad
Edited by: Ammad Ahmed on Jul 3, 2010 7:55 PM
added GROUP BY

Report for getting an oppotunity for current month

Please tell what can be a filter or function for getting an oppotunity for current month , i have the field as "Opportunity created date" so what function or SQL expression can b eused to get created date = current month's date

Thanks..i'll do taht
Edited by: user1074008 on Sep 28, 2010 3:11 AM

Can i add data for current month only

can I add data for current month only?

Knowing your plan options is important marlingut! So that we are able to provide correct information, what make and model phone are you trying to add data too? Is this device already activated on your account?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Showing Calendar for Current Month

Dear Forum,
I intend to display calendar in corner region of my home page for current month, and also want to highlight dates in calendar based on certain parameter or query output.
How should i accomplish this in HTMLDB?
Regards,
Manpreet Johal

Sir,
Please answer to this problem asap.
Regards,
Manpreet Johal

Delete Costing run - marked and released

Hi
I did one costing run which was marked and anolther costing run which was marked and released also.
I want to delete both the above.
Which transaction I can use for this and what is the implication of them ?

Hi NIkhitha,
CKR1 is the Tcode for Deletion of Cost Estimate as told by Ajay. However to add few implications and points to be reviwed before deletion.
1. Check whether it is really necessary to delete
2. Any Orders are being valuated by this Cost Estimate price
SB

Delete DSO data for current month on a daily basis.

Hi Gurus,
We have a requirement where we have to delete the data in the BW DSO's for the Current Month every day before loading data into it. The reason for this is that in R3 they delete data for the current month in addition to adding new records and changing existing records. Since we do a Full load in BW, the deleted records in R3 will still exist in the BW DSO, hence the need for deletion.
We can't delete ALL the data in the DSO as we use the BW DSO for Archiving purpose and the R3 table at any point of time will have just 3 months of data, while BW will have historical data.
I know there is a process to delete DSO contents in the Process Chain, but can it be set up to just delete the current months data??
Thanks
Arvind

Hi Arvind,
The program RSDRD_DELETE_FACTS or transaction DELETE_FACTS will help you in deleting the records. Execute the program and select the option 'Generate Selection Program'. It will create a Z program , you can then dynamically select the current month in the Variant and assign the Z program and the variant in ABAP step of the process chain.
Hope this helps with your requirement.
Regards,
BINETWEAVER2004s

Deleting Costing Run

Hi Guru's,
1) Can anybody explain me the difference between the usage of CKR1 and CK44?
2) Which one is better to use CKR1 or CK44?
3) TCode or Program to delete the costing run in bulk?
Actually, the intention is to reduce data from CKIS table.
Regards,
Abhishek
Edited by: Abhishek A on Oct 30, 2009 1:59 PM

Dear Abhishek,
1.CKR1 is it reorganize the cost estimates like for current std cost estimate or previous std cost estimate or else for future
standard cost estimate.After performing this the system deletes the entry from the respective field in the material master,say in
case if you have executed for current std cost estimate,after performing CKR1,the system deletes the value from the current
price column in costing2 view.
2.CK44 is used for deleting the costing run which were created for std.cost estimate either through Ck40N or else CK41.
So in my understanding the functionality wise these 2 T codes perform different actions.
Regards
Mangalraj.S

Filtering 13 months of data by top 5 for current month

Hello,
I am wanting to create a table/chart to display the last 13 months worth of data filtered by the top 5 product categories for the current month.
I have to be able to have this dynamically gerenate, as I am unable to modify the filters each time the report is run.
I was doing this by having a little table to display the top 5 for the current month, and then filtering the 13 months of data based on that table, but this isn't working when I am unable to modify the report.
Is there any sort of formula that I can use to achieve this?
Thanks!
Stephanie

Hi Stephanie,
For displaying the data only for the last 13 months, you can try using the DaysBetween() function. Now, 13 months would approximately be 390 days. So assuming that you have at least one object in your report that displays the date (say for e.g. "MyDate"), you can use the following formula: If DaysBetween(CurrentDate(),MyDate) < 390 Then 1 Else 0. Give a name to this formula, and then drag it onto the report filter pane. In the condition, set it as 'Equal to 1'. This will filter the data for the past 13 months, and then you can apply the ranking for the Top 5 as per your requirement.
Regards,
Alok.

Mobile Email not retrieving messages for current month

I did a couple of quick searches on this problem, but I couldn't find any information if this is a known bug with the Mobile Email application. For the last week or so, whenever I access Mobile Email on my LG enV Touch, the first page of emails shown are for the previous month, but the same day of the month (so today is August 16th, 2010, and the newest messages I can access are from July 16, 2010). There is no software update available. From the application's info page it seems like my version is 3.1.3.2.
Also, the email address that is being accessed is for an @comcast.net account, but this setup has been working fine for over a year now, until this issue came up. When I access this account elsewhere, it does show messages for the current day, like normal.
Has anybody seen a problem like this? Any suggestions for next step on looking into this?
Thank you.
- Wes

I do apologize that you are not able to retrieve any of the current months emails.from your device.However you may need to re download the mobile email application in order to get the emails to start coming through. Here are some steps to downloading the mobile email application from your device. Hope this helps!
From the main screen, select Menu.
Select Media Center (Get It Now).
Select Browse & Download (Tools on the Go).
Select Get New Applications.
Select Mobile Email.
Select the purchase option.
If prompted, select Yes to start the download.
Select Yes.
To continue the installation, review the Terms of Use, then select Accept.
Select the desired email provider, then choose Select.
If prompted, review the Terms of Use for the email provider, then select Accept.
Enter the username and password, then select Sign In.
Username and password are case sensitive

Get data for current month in VC from query - Urgent

Hi all,
I have designed a query for cube FIAR_C03 for overdue items and query output contains customer, net due date, document date, fiscal year period and amount. I want a chart for that query in VC that only contains those items in which net due date is in current month. How can i do that?
Where I can place the condition to display only those items in vc in which net due date is in current month and how ?
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi Aisha,
It is possible to do with following steps:
1. In Query Design make your field 'Net Due' filter with variable for date input (0CALMONTH for example where your date should be this format MMYYYY). Test your query and see if you input a month/year date it would would work;
2. Build one table from output of your query (choose fields);
3. In Visual Composer, drag your query into your board and from 'Varaiables' port (NOT FROM INPUT) drag a line to create a Start point. As soon you realease to create 'Start' a box will ask which fields you want. Choose your date as field;
4. Select the line between Start point a query. In Input Field assigned the following formula (DSTR(NOW(),'MMYYYY') *
5. Deploy your model
at this formula I said: transform NOW(), current date, in Text with format MMYYYY (012002 for example).
It works!
Assigned points if was helpful.
Kind Regards,
Gilson Teixeira

Delete cost run & reset release for current month

Similar Messages

Maybe you are looking for