Delete Issue with 1:M Relationship.

We had following Relationship M-M relation mapped through a cross Reference Table.
Table Cust(customer Table), AddrXRef (XRef table), Addr(Address)
Relationship is as follows.
Cust - > AddrXRef 1-M Privatly Owned
AddrXRef -> Cust 1-1
Addr -> AddrXRef 1-M Privatly Owned
AddrXRef -> Addr 1-1
Here the Sittuation we have a use case where two row in AddrXRef table which
share the the same Addr Row for Same Customer. We need to update one of
the AddrXRef row to association with a New Addr row.
We tried create a new instance for instance of Addr Object and associating it
to existing AddrXRef instance.(Both Forward and Back Refrence for Add ->AddrXRef)
The behaviour we see is instance of issue update on AddrXRef table and Insert of new row in Addr table. We see two insert one of new Addr row and one for AddrXRef.
and delete issue for AddrXRef row and old Addr row which is shared with other AddrXRef row.
sample code for method.
     public void validatePackageSentAddress()
CustomerAddress homeAddress = getHomeAddress();
CustomerAddress pkgSentAddress = getPackageSentAddress();
if ( pkgSentAddress != null && homeAddress != null &&
          pkgSentAddress.getDelegate() != null &&
          pkgSentAddress.getAddrUniqNum() != null
          && pkgSentAddress.getAddrUniqNum().equals(homeAddress.getAddrUniqNum()) )
     CustomerAddrXRefBO pkgSentAddrXRefBo = pkgSentAddress.getDelegate();
     CustomerAddressBO newAddrBo = new CustomerAddressBO();
     // Associated new CustAddressBo instance pkgsendAddrXRefBo
     //     1) reference the new Addr from AddrXRef for PkgSent
     // Set from Forward and Back reference
     pkgSentAddrXRefBo.setCustomerAddress(newAddrBo);
     newAddrBo.addCustomerAddrXRef(pkgSentAddrXRefBo);
     // Only specific attribute need to be copied for PackageSent Address
     pkgSentAddress.setCityName(homeAddress.getCityName());
     pkgSentAddress.setCountryDescText(homeAddress.getCountryDescText());
     pkgSentAddress.setCountyDescText(homeAddress.getCountyDescText());
     pkgSentAddress.setStateCd(homeAddress.getStateCd());
     pkgSentAddress.setStreetNum(homeAddress.getStreetNum());
     pkgSentAddress.setStreetName(homeAddress.getStreetName());
     pkgSentAddress.setResidencyTypeCd(homeAddress.getResidencyTypeCd());
     pkgSentAddress.setBldgName(homeAddress.getBldgName());
Message was edited by:
user462895

The problem is that by making the AddrXRef privately owned it cannot be reparented. Once it is removed from it's parent's list (either one) it will be deleted. To achieve what you're trying to do you'll need to delete the old incorrect AddrXRef and replace it with a new correct one.
From the TopLink Developer's Guide[1]:
When you tell TopLink that a relationship is privately owned, you are specifying that:
* If the source of a privately owned relationship is deleted, then delete the target.
* If you remove the reference to a target from a source, then delete the target.
--Shaun
[1] http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_html/uowbas007.htm#i1134011

Similar Messages

  • Issue with OM relationship structure when using report RHSTRU00

    In HR, one Person (P) is attached to only one Central Person (CP). So, when we run the report with date period as of Today, we expect a Tree structure in the output with P-CP relationships displayed. However, we see that the report displays one Person attached to many CPs.
    The program fetches the 1 P to 1 CP combination. However, it deletes all Persons who are not Active as of today but does not delete the CP. It then attaches all CPs to the first Active Person it can find.
    This is a serious bug since it shows data which is different from what exists in the system. In our systems as would be in any HR system in the world, One person can be attached to only one CP and the program shows that the Person is attached to many CPs.
    I opened a OSS message but SAP refused to correct this bug.
    Has anybody else ever encountered the same issue and do you have a solution to this?

    I checked the report, and it certainly returns incorrect data, I found exactly what you say regarding active/inactive persons.
    What is SAP's reason for not looking into this? It would be interesting to hear their argumentation for this not being a bug. 
    It may be that SAP expects RHSTRU00 to be called only for active persons? This would require running another report first to get the input for RHSTRU00. This seems like a strange prerequisite for the program, and I do not understand why SAP don't see this as a bug. The error seems rather obvious and reproducable.
    I often find that I have to push to get passed first line of support to have SAP see the problem. It is tiring, but I have found this to be the fact far too often. 
    PS - we never use the program like this, so we do not face the problem ourselves.
    /Kirsten

  • Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

    Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

    Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

  • I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    Hi An Iphone user,
    If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
    How do I delete a message?
    To delete a message, tap and hold the message bubble, then tap More.
    Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
    After you delete a message, you can recover it only by restoring from a backup.
    Send messages with your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • Issue with deleting a group using Request APIs in OIM 11g R1

    Hi,
    I am facing an issue with Request Based provisioning in OIM 11g R1.
    I am currently testing a scenario where i have imported a data set for 'Modify Provisioned Resource' and am able to add a group/entitlement to an already provisioned resource by using the following code :
            RequestBeneficiaryEntityAttribute childEntityAttribute= new RequestBeneficiaryEntityAttribute();
            childEntityAttribute.setName("AD User Group Details");
            childEntityAttribute.setType(TYPE.String);
            List<RequestBeneficiaryEntityAttribute> childEntityAttributeList=new ArrayList<RequestBeneficiaryEntityAttribute>();
            RequestBeneficiaryEntityAttribute attr = new RequestBeneficiaryEntityAttribute("Group Name", <group>,                                                                       RequestBeneficiaryEntityAttribute.TYPE.String);
            childEntityAttributeList.add(attr);
            childEntityAttribute.setChildAttributes(childEntityAttributeList);
            childEntityAttribute.setAction(RequestBeneficiaryEntityAttribute.ACTION.Add);
            beneficiaryEntityAttributeList = new ArrayList<RequestBeneficiaryEntityAttribute>();   
            beneficiaryEntityAttributeList.add(childEntityAttribute);
            beneficiarytEntity.setEntityData(beneficiaryEntityAttributeList);
    This works fine for adding a group but if i try to remove a group by changing the action to Delete in the same code, the request fails. The only change made is in the following line:
    childEntityAttribute.setAction(RequestBeneficiaryEntityAttribute.ACTION.Delete);
    Could you please suggest where can this possibly be wrong.
    Thanks for your time and help

    Hi BB,
    I am trying to follow up your response.
    You are suggestng to use prepopulate adapter for to populate respource object name, that means We have to just use an sql query from obj tabke to get the resource object name. right ?? it could be like below, what should I have entity-type value here ??
    <AttributeReference name="Field1" attr-ref="act_key"
    available-in-bulk="false" type="Long" length="20" widget="ENTITY" required="true"
    entity-type="????"/>
    <PrePopulationAdapter name="prepopulateResurceObject"
    classname="my.sample.package.prepopulateResurceObject" />
    </AttributeReference>
    <AttributeReference name="Field2" attr-ref="Field2" type="String" length="256" widget="lookup-query"
    available-in-bulk="true" required="true">
    <lookupQuery lookup-query="select lkv_encoded as Value,lkv_decoded as Description from lkv lkv,lku lku
    where lkv.lku_key=lku.lku_key and lku_type_string_key='Lookup.xxx.BO.Field2'
    and instr(lkv_encoded,concat('$Form data.Field1', '~'))>0" display-field="Description" save-field="Value" />
    </AttributeReference>
    Then I need think about the 'Lookup.xxx.BO.Field2' format.
    Could you please let me know if my understanding is correct?? What is the entity-type value of the first attribute reference value?
    Thanks for your all help.

  • Oracle 10g - issue with "DELETE from TABLE WHERE ID in (1,2,3)" (cfqueryparam used)

    Hello, everyone.
    I am having issues with running a DELETE statement on an Oracle 10g database.
    DELETE
    FROM tableA
    WHERE ID in (1,2,3)
    If there is only one ID for the IN clause, it works.  But if more than one ID is supplied, I get an "SQL command not properly ended" error message.  Here is the query as CF:
    DELETE
    FROM TRAINING
    WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
         AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
    Anyone work with Oracle that can help me with this?  I'm an experienced MS-SQL developer; Oracle is new to me.
    Thanks,
    ^_^

    Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause. 

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Urgent : Issue with deleting Line Item in ME22N

    Hi all,
    I have an issue with deleting line item in ME22N for some Purchase Orders.
    When I try to delete the line item, a warning message comes up saying that " Quantity invoiced or delivered is less than the quantity ordered". And I am unable to proceed further and save the PO. Could anyone let me know as why this is happening?
    Thanks in advance.
    Regards,
    Adapala.

    Hi
    there is no need of group key.
    if any of these 3 are done, payment will be done in total.
    1.In setup all company codes for payment transactions , DESELECT seperate payment per business area check box
    2.In setup paying company codes for payment transactions , DESELECT seperate payment for each reference check box.
    3.In the Vendor Master got to payment transactions tab and below the payment method , there will be individual payment checkbox. DESELECT that check box.
    try again with first two with DESELECT options , i will check out with DME.
    Cheers

  • TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

    I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
    Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

    Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
    Sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again
    If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
    If that doesn't work, restart your router and reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.   Later, when I tried to open InDesign I received the following error:  AMT Subsystem

    I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.
    Later, when I tried to open InDesign I received the following error:
    AMT Subsystem Failure
    The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
    I rebooted the computer and tried again:
    Licensing for this product has stopped working.
    You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.
    I can access Acrobat and MS Office programs, it's just the CS3 programs that I can't access. Can I uninstall and then reinstall CS3 without an access (un-lock) code?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Trying to delete a file with Powershell script ran by a service but issues with uac

    I'm having issues with a script that will delete a file on the C-Drive of a server. the script looks like this:
    param(
    [Parameter(Mandatory=$true)][string]$hostname
    $StrFileName = "C:\Program Files\NSClient++\nsclient.log"
    $LogLocal="c:\Nagios\naf_delete_nscp_log_file.log"
    $Date = Get-Date -Format "yyyy-MM-dd hh:mm:ss"
    "$date : NSClient logfile deletion requested on $hostname" | Out-File -filepath $LogLocal -Append
    If (Test-Path "$strFileName"){
    Remove-Item $strFileName -Force
    $Date = Get-Date -Format "yyyy-MM-dd hh:mm:ss"
    "$date : NSClient logfile deleted on $hostname" | Out-File -filepath $LogLocal -Append
    The script is initiated from a Nagios quick action which will use nrpe to pass the host as parameter and make the nscp service, which runs as local system, run it. It works perfectly on servers that have no uac enabled, but I can't get it to work on servers
    with uac. I've tried numerous options, but none seem to work. Any tips or advice to get this working with Powershell v2 code on servers with uac enabled is highly appreciated.
    Thanks.
    Willem

    Hi Willem,
    one thing to note: I don't see why your script itself has a hostname parameter.
    One way around UAC has always been the Windows Task Scheduler. If you register a task as System run and triggered by an event, you can simply call the event locally (which doesn't require admin permissions) and it will perform the task.
    I don't know how your Nagios construct works and the script by itself doesn't make much sense. If you want advice on how to do this without resorting to tasks, I'd need to know more about the system you are using.
    Cheers,
    Fred
    There's no place like 127.0.0.1

  • Issue with IMAP accounts - cannot delete

    I am running the latest OS on iPhone 4.
    I recently had some issues with my email accounts and had to delete them all from my iPhone, then recreate them. I thought they were originally set up as POP emails, but as I could see all my online folders, I gather they were IMAP.
    I did recreate them all as IMAP accounts, but was experiencing deleting emails whilst off-line, which I could previously do. I am also now experiencing an issue with my main account where every time I try to delete an email, even when online, I get the following message:
    Unable to Move Message
    The message could not be moved to the mailbox Trash.
    I went into the Advanced settings in my account and changed the deleted mailbox to 'On My iPhone', or to the trash folder online, but this hasn't made any difference. I can however move emails into folders, although moving emails to the trash instead of deleting them is a bit of a long winded process. I just can't work out why, before all this, I could delete emails with no problem even when I had no internet connection, and why I can't now.
    Would anyone be able to help? Thank you in advance for any help you could provide.

    Well, I eventually found an answer to this and it seems to work. Here it is in case someone would have the same issue
    http://support.apple.com/kb/HT1393?viewlocale=en_US

  • Has anyone had issues with the most recent Yosemite update

    I installed Yosemite October of 2014 mainly because I needed to update itunes to continue to help my daughter maintain her music files. Anyway the reason hardly matters. My computer and Yosemite did not get along. Posted up a file of my computer condition for people to look at here and the basic recommendation was to delete this that and the other thing. So I did that and the computer worked somewhat better. However I really am not sure if it was working better because Apple had been making progress with Yosemite ironing out Yosemite bugs. I had not reinstalled any of the software that it was recommended I delete back in October. So I doubt that is an issue.
    Two weeks ago while updating, generally, a Yosemite update started downloading to my computer. It is now running 10.10.2.
    Since then Mozilla crashes about five times a day and runs very slowly most of the time. Wondering if there is anything I can do or should I just wait it out...hope for the bestv AGAIN. I am encouraged by the fact that over time from October to mid February, Yosemite and my computer kept getting along better and batter. Since the update I am more or less back to square 1 as far as general speed and functionality and behind the eight ball as far as Miozilla goes as it is crashing constantly.
    I also do not like how update files are identified in Yosemite. There are times when all you get is a notification that there are updates ready with no identification of what they are. Had I known that was a Yosemite update, I would  not have touched it. What is up with this no identification of update files? Trying to ambush us now because people are beginning to avoid their updates? Good grief Apple.
    Anyway....any ideas? Just wait it out? Hope Apple gets back on a path of bug fixes for Yosemite? Anybody with a quick fix for this one?

    Automatically checking for updates is not the same thing as automatically installing updates and even automatically downloading updates is not the same thing as automatically installing updates. If Apple has now decided to describe them and implement them that way ....that is a mistake!
    Here is what I have in my App store preferences although I repeat, I have never changed anything. What items are selected there are the items selected ions ago or defaulted in possibly with iTunes 12.0 installed and I was always in the past been given the opportunity to view any updates BEFORE They installed.
    "Automatically check for updates" is checked. That should not cause an issue of any kind. If it is that is a problem not of my making!
    "Download newly available updates in the background" is checked with an additional descriptive line of information that reads "you will be notified when the updates are ready to be installed" I was going to uncheck this. Although I did not ever go to this location and change my settings which leads me to believe that this is a default choice in Yosemite or iTunes 12.0 as this is not the way I am used to my updates either coming to me or being installed
    "Install app updates" is checked ...Really....with permission, without permission, with notification? What the heck does this line really mean? Going to uncheck this
    "Install OS X updates" IS NOT CHECKED
    "Install system data files and security updates" is checked. This is another one that I am going to uncheck
    "Automatically download apps purchased on other macs" is not checked
    This system clearly Installed an OS X update without even asking me if I wanted it installed regardless of the fact the box is not even checked. So I have no idea how it managed to do that when the check box for OS X updates is not checked. A big OS X screen came up as the thing started installing leaving little doubt what it was at the point of being too late to do anything about it
    There is an interesting element to the relationship between "Download newly available updates in the background" and "Install app updates". If you uncheck the former, a check immediately appears in the box for the latter and the box ix grayed out preventing you from making further changes. So your options are for updates to be downloaded in the background or have updates installed without prior notification. What the heck kind of a choice is that?                             
    I am going to uncheck all of these for the time being except "automatic checking" and "Download newly available updates in the background". The former  should not cause a problem and has never in the past caused a problem. Seems to me that I am forced to the latter for now. However to be perfectly honest i no longer have any idea what Apple is doing and I am not completely convinced that they know either.....not any more
    I am going to go to Apple Tech Support and get full descriptions from them as it appears possible that they have changed their definitions and descriptive materials with regard to update activity either in Yosemite or iTunes.
    Finally, this issue with automatic checking has nothing to do with Mozilla crashing five times a day in Yosemite. That is a separate problem and I guess I am just going to have to hope that Apple Yosemite bug fixes brings this back under control.

  • Issues with iMessage when switching data carrier (wifi - cellular)

    So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

    Hi there BigDogg795,
    I would recommend taking a look at the troubleshooting steps for iMessage found in the article below. 
    iOS: Troubleshooting Messages - Apple Support
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    -Griff W.

  • Issues with using 3 monitors on 2 external gpu

    Hi,
    I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
    1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
    lspci |grep VGA:
    03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    xrandr:
    Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
    DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
    Section "ServerLayout"
    Identifier "X.org Configured"
    #Screen 0 "Screen0" 0 0
    #Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "DELL"
    Option "Monitor-DVI-I-1" "DVI-I-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "DELL"
    Option "Monitor-DP-1" "DP-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "DELL"
    Option "Monitor-DP-1-2" "DP-1-2"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:3:0:0"
    Option "Monitor-DVI-I-1"
    Option "Monitor-DP-1"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "nouveau"
    BusID "PCI:34:0:0"
    Option "Monitor-DP-1-2"
    EndSection
    Xorg log (I can see that monitor at time 1767.316):
    [ 1766.959]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1766.960] X Protocol Version 11, Revision 0
    [ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
    [ 1766.961] Build Date: 13 December 2013 03:11:42PM
    [ 1766.962]
    [ 1766.962] Current version of pixman: 0.32.4
    [ 1766.963] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
    [ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
    [ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1766.966] (==) ServerLayout "X.org Configured"
    [ 1766.966] (==) No screen section available. Using defaults.
    [ 1766.966] (**) |-->Screen "Default Screen Section" (0)
    [ 1766.966] (**) | |-->Monitor "<default monitor>"
    [ 1766.966] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 1766.966] (**) | |-->Device "Card0"
    [ 1766.966] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1766.966] (**) |-->Input Device "Mouse0"
    [ 1766.966] (**) |-->Input Device "Keyboard0"
    [ 1766.966] (==) Automatically adding devices
    [ 1766.966] (==) Automatically enabling devices
    [ 1766.966] (==) Automatically adding GPU devices
    [ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1766.967] (WW) Disabling Mouse0
    [ 1766.967] (WW) Disabling Keyboard0
    [ 1766.967] (II) Loader magic: 0x7fec20
    [ 1766.967] (II) Module ABI versions:
    [ 1766.967] X.Org ANSI C Emulation: 0.4
    [ 1766.967] X.Org Video Driver: 14.1
    [ 1766.967] X.Org XInput driver : 19.1
    [ 1766.967] X.Org Server Extension : 7.0
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
    [ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
    [ 1767.169] Initializing built-in extension Generic Event Extension
    [ 1767.170] Initializing built-in extension SHAPE
    [ 1767.170] Initializing built-in extension MIT-SHM
    [ 1767.170] Initializing built-in extension XInputExtension
    [ 1767.171] Initializing built-in extension XTEST
    [ 1767.171] Initializing built-in extension BIG-REQUESTS
    [ 1767.172] Initializing built-in extension SYNC
    [ 1767.172] Initializing built-in extension XKEYBOARD
    [ 1767.172] Initializing built-in extension XC-MISC
    [ 1767.173] Initializing built-in extension SECURITY
    [ 1767.173] Initializing built-in extension XINERAMA
    [ 1767.174] Initializing built-in extension XFIXES
    [ 1767.174] Initializing built-in extension RENDER
    [ 1767.174] Initializing built-in extension RANDR
    [ 1767.175] Initializing built-in extension COMPOSITE
    [ 1767.175] Initializing built-in extension DAMAGE
    [ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1767.176] Initializing built-in extension DOUBLE-BUFFER
    [ 1767.176] Initializing built-in extension RECORD
    [ 1767.176] Initializing built-in extension DPMS
    [ 1767.177] Initializing built-in extension X-Resource
    [ 1767.177] Initializing built-in extension XVideo
    [ 1767.177] Initializing built-in extension XVideo-MotionCompensation
    [ 1767.178] Initializing built-in extension XFree86-VidModeExtension
    [ 1767.178] Initializing built-in extension XFree86-DGA
    [ 1767.178] Initializing built-in extension XFree86-DRI
    [ 1767.179] Initializing built-in extension DRI2
    [ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 1767.179] (II) LoadModule: "glx"
    [ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1767.179] (II) Module glx: vendor="X.Org Foundation"
    [ 1767.179] compiled for 1.14.5, module version = 1.0.0
    [ 1767.179] ABI class: X.Org Server Extension, version 7.0
    [ 1767.179] (==) AIGLX enabled
    [ 1767.180] Loading extension GLX
    [ 1767.180] (II) LoadModule: "nouveau"
    [ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
    [ 1767.180] compiled for 1.14.4, module version = 1.0.10
    [ 1767.180] Module class: X.Org Video Driver
    [ 1767.180] ABI class: X.Org Video Driver, version 14.1
    [ 1767.180] (II) NOUVEAU driver
    [ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 1767.180] RIVA TNT (NV04)
    [ 1767.180] RIVA TNT2 (NV05)
    [ 1767.180] GeForce 256 (NV10)
    [ 1767.180] GeForce 2 (NV11, NV15)
    [ 1767.180] GeForce 4MX (NV17, NV18)
    [ 1767.180] GeForce 3 (NV20)
    [ 1767.180] GeForce 4Ti (NV25, NV28)
    [ 1767.180] GeForce FX (NV3x)
    [ 1767.180] GeForce 6 (NV4x)
    [ 1767.180] GeForce 7 (G7x)
    [ 1767.180] GeForce 8 (G8x)
    [ 1767.180] GeForce GTX 200 (NVA0)
    [ 1767.180] GeForce GTX 400 (NVC0)
    [ 1767.180] (--) using VT number 3
    [ 1767.182] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) Loading sub module "dri2"
    [ 1767.183] (II) LoadModule: "dri2"
    [ 1767.183] (II) Module "dri2" already built-in
    [ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
    [ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 1767.183] (==) NOUVEAU(0): RGB weight 888
    [ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
    [ 1767.183] (==) NOUVEAU(0): Using HW cursor
    [ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 1767.183] (==) NOUVEAU(0): Page flipping enabled
    [ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
    [ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1767.265] (II) NOUVEAU(0): Digital Display Input
    [ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.265] (II) NOUVEAU(0): Supported established timings:
    [ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.265] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
    [ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.265] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
    [ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
    [ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
    [ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
    [ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
    [ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
    [ 1767.273] (II) NOUVEAU(0): Digital Display Input
    [ 1767.273] (II) NOUVEAU(0): 8 bits per channel
    [ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
    [ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.273] (II) NOUVEAU(0): Supported established timings:
    [ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.273] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
    [ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.273] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
    [ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
    [ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
    [ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
    [ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
    [ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 1767.274] (II) Loading sub module "fb"
    [ 1767.274] (II) LoadModule: "fb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.274] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "exa"
    [ 1767.274] (II) LoadModule: "exa"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.274] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 2.6.0
    [ 1767.274] ABI class: X.Org Video Driver, version 14.1
    [ 1767.274] (II) Loading sub module "shadowfb"
    [ 1767.274] (II) LoadModule: "shadowfb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "dri2"
    [ 1767.274] (II) LoadModule: "dri2"
    [ 1767.274] (II) Module "dri2" already built-in
    [ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
    [ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 1767.275] (==) NOUVEAU(G0): RGB weight 888
    [ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 1767.275] (==) NOUVEAU(G0): Using HW cursor
    [ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
    [ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
    [ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
    [ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
    [ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
    [ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
    [ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
    [ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
    [ 1767.347] (II) NOUVEAU(G0): Digital Display Input
    [ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
    [ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
    [ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
    [ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
    [ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
    [ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.347] (II) NOUVEAU(G0): Supported established timings:
    [ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
    [ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
    [ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
    [ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
    [ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
    [ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
    [ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
    [ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
    [ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
    [ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
    [ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
    [ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
    [ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
    [ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
    [ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
    [ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 1767.348] (II) Loading sub module "fb"
    [ 1767.348] (II) LoadModule: "fb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.348] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (II) Loading sub module "exa"
    [ 1767.348] (II) LoadModule: "exa"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.348] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 2.6.0
    [ 1767.348] ABI class: X.Org Video Driver, version 14.1
    [ 1767.348] (II) Loading sub module "shadowfb"
    [ 1767.348] (II) LoadModule: "shadowfb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (--) Depth 24 pixmap format is 32 bpp
    [ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 1767.360] (II) EXA(256): Driver registered support for the following operations:
    [ 1767.360] (II) Solid
    [ 1767.360] (II) Copy
    [ 1767.360] (II) Composite (RENDER acceleration)
    [ 1767.360] (II) UploadToScreen
    [ 1767.360] (II) DownloadFromScreen
    [ 1767.360] (==) NOUVEAU(G0): Backing store disabled
    [ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 1767.360] (==) NOUVEAU(G0): DPMS enabled
    [ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
    [ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
    [ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 1767.366] (II) EXA(0): Driver registered support for the following operations:
    [ 1767.366] (II) Solid
    [ 1767.366] (II) Copy
    [ 1767.366] (II) Composite (RENDER acceleration)
    [ 1767.366] (II) UploadToScreen
    [ 1767.366] (II) DownloadFromScreen
    [ 1767.366] (==) NOUVEAU(0): Backing store disabled
    [ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 1767.366] (==) NOUVEAU(0): DPMS enabled
    [ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.366] (--) RandR disabled
    [ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 1767.389] (II) AIGLX: Loaded and initialized nouveau
    [ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
    [ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
    [ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 1767.444] resize called 1920 1080
    [ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.479] (II) LoadModule: "evdev"
    [ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
    [ 1767.479] compiled for 1.14.3, module version = 2.8.2
    [ 1767.479] Module class: X.Org XInput Driver
    [ 1767.479] ABI class: X.Org XInput driver, version 19.1
    [ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.479] (**) Power Button: always reports core events
    [ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.479] (--) evdev: Power Button: Found keys
    [ 1767.479] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1767.479] (**) Option "xkb_rules" "evdev"
    [ 1767.479] (**) Option "xkb_model" "pc104"
    [ 1767.479] (**) Option "xkb_layout" "us"
    [ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.500] (**) Power Button: always reports core events
    [ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.500] (--) evdev: Power Button: Found keys
    [ 1767.500] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
    [ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1767.500] (**) Option "xkb_rules" "evdev"
    [ 1767.500] (**) Option "xkb_model" "pc104"
    [ 1767.500] (**) Option "xkb_layout" "us"
    [ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
    [ 1767.502] (II) No input driver specified, ignoring this device.
    [ 1767.502] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
    [ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
    [ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
    [ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
    [ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
    [ 1767.502] (**) Option "xkb_rules" "evdev"
    [ 1767.502] (**) Option "xkb_model" "pc104"
    [ 1767.502] (**) Option "xkb_layout" "us"
    [ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
    [ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
    [ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    [ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 1767.504] (**) Option "xkb_rules" "evdev"
    [ 1767.504] (**) Option "xkb_model" "pc104"
    [ 1767.504] (**) Option "xkb_layout" "us"
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
    [ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 1767.505] (**) PS/2 Generic Mouse: always reports core events
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
    [ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1780.500] Error dropping master: -22(Invalid argument)
    [ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
    [ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
    [ 1780.503] (EE) Server terminated successfully (0). Closing log file.
    Thanks for any help!

    I have  a similar issue except with two ATI cards and four monitors.
    I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
    I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
    lspci:
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    My xorg.conf:
    Section "Device"
    Identifier "ATI0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI1"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "ATI2"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-2"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI3"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-3"
    Screen 1
    EndSection
    Section "Monitor"
    Identifier "DVI-0"
    Option "Primary" "On"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-1"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-2"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-3"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "ATI0"
    Monitor "DVI-0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "ATI1"
    Monitor "DVI-1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "ATI2"
    Monitor "DVI-2"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "ATI3"
    Monitor "DVI-3"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Screen0" 0 0
    Screen "Screen1" RightOf "Screen0"
    Screen "Screen2" Above "Screen1"
    Screen "Screen3" Above "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
    I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
    xrandr --listproviders show the two cards as well.
    Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
    "xrandr --setprovideroutputsource 0 1" just plain crashes X

Maybe you are looking for

  • Sharing printer with PC

    OK, I'm stuck. I have one Mac and three PCs(two laptops and one desktop), and I am trying to use the Mac to share a printer. I am doing this because the Mac does not restarted. I have a workgroup setup and I can somewhat share files. I have no succes

  • How to uninstall and reinstall Adobe InDesign CS5?

    My Adobe InDesign CS5 stopped opening properly. Upon startup all the menu items were grayed out and unaccessible. Adobe Chat support advised me to uninstall and reinstall CS5. My other Adobe programs are working fine. (CS5 photoshop, illustrator, acr

  • Xorg takes more than two seconds before start

    I was trying to speed up my boot process yesterday. but, there is a problem that xorg starts slow. http://miko.tw/~virtuemood/bootchart.png it hangs before it starts. what should I do? Last edited by virtuemood (2009-07-17 10:48:50)

  • Issues after last OS update

    Post update, (1) I lost all entries on my Calendar and it does accept any new entries and (2) I lost all files on Remember. Any help????

  • How do I insert an image between two elements of another image in PS CS6?

    HI, I'm trying to teach myself PS (it's not going well). I'd like to insert a screenshot into an image of hands holding an iPad (attached). Can anyone point me to a handy step by step guide for doing this? (explain it as if to a child) Thanks heaps.