Delete logs with SLG2 : system KO

Hello,
We have deleted logs with transaction SLG2, and it lead to a abap error.
Now we cannot run any transaction anymore, always the same screen :
ABAP runtime error : error code .....
but without error code ...
Any ideas ?
Jarod

Hi,
in your PChain, did you try selecting a PSA like 8<ODSTECHNAME>_XX
All this kind of PSA names for your ODS should get the same two letters at end (it reflects your MyBW source system)
This might make it!
hope this helps...
Olivier.

Similar Messages

XI Integration Engine- You cannot log on to system BS_SAP_R_3 with user XIR

I have given the correct user name and password while creating RFC destination and Port.
And I see wrong user ID/password in ping status.
Ping Status: You cannot log on to system BS_SAP_R_3 with user XIRWBUSER
Last Retry Thu Jan 18 23:13:47 UTC 2007 .
Can anybody guide me on this?
Thanks
Chiru

Hi,
I have correct user id/ password in RFC destination. I do not know why in Runtime work Bench it is showing the wrong userid/password.
I forgot to give it at the first time and later I gave the user details.
And in Runtime work bench this error is not going away.
Any help on this?
Thanks
chiru

Flashupdater filling system.log with spew

Has anyone else noticed that flashupdater is filling their system.log with spew? This is happening on systems with and without flash installed. Sign, yet another blunder...

Linc Davis wrote:
That's the Flash updater included in Mac OS 10.7.4. It doesn't work on a case-sensitive boot volume, which is what you have.
com.apple.flashupdat...: Apple Support Communities
Correct. See this post: https://discussions.apple.com/thread/3952378?tstart=0
and change your com.apple.flashupdater.plist file. That should take care of it.

I cannot log on to my Comcast e-mail from my IMac anymore. This is a new issue, recently I had to delete cookies from my system in order so my email wasn't frozen, but over the past few days it has went from bad to worse. Any suggestions-I am not very c

I cannot log on to my Comcast e-mail from my IMac anymore. This is a new issue, recently I had to delete cookies from my system in order so my email wasn’t frozen, but over the past few days it has went from bad to worse. I am able to enter my login information, but it just goes right back to the home page. Any suggestions…maybe I deleted something else in the process.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

What OS?

My Mac version 10.4 isn't compatible so I deleted Firefox entirely. How do I get the old version (the one that works with my system) back?

I have a Mac OSX 10.4.11. I installed the new Firefox update and when I tried to open it, it said it wasn't compatible with my compatible with my computer. I deleted it and now I would like to know how to install the old version of Firefox --or any version that works with my system. Thank you!

Last version for 10.4.11. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

How can I send deleted emails to the recycle bin vs just deleting them with my eamail system?

I have a program that when I empty the recycle bin, it also wipes the allocated space to delete the files totally from the hard cleans the hard disk and gives me space. Space that I need. I get a lot of emails that are large. I don't know if deleting them with "yahoo" opens up space. But using this program with items in the recycle bin will. I have Windows 7 on one computer and windows xp on the other. I need to clean up both computers the best I can so there is space for me to install other items that are rather large sized. Please help. Thank you.

Are you talking about files from webmail? If you clear the browser cache, does that not free up some space?

Error in the source systen with app log in source system

Hi experts
I am running a full load for 0HR_PT_2(Actual Personnel Times ).this load is loading the data and says no errors occurred and write an app log in source sytem saying
Extraction date for personnel number 00000000 set to 20081231.
I have tried to select the data selection of personnel no from
00000001 to 99999999.
but it still gives me the same warning.
please help me in solving.
thanking you
satish

Hi Satish,
Were you able to fix the application log in source system issue ? I am also facing the same problem for 0HR_PT_2 .
plz let me know.
Points will be awarded .

How do I delete cascade with a PL/SQL procedure?

This script will create a PL/SQL procedure that deletes cascade. This is a post to contribute to the Oracle community. Take the code as is and test it before you use it in production. Make sure this is what you want.
Procedure Delete Cascade (prc_delete_cascade)
Description
=============
The principle is very simple. The procedure uses a table called TO_BE_DELETED to keep a list of records to be deleted. This
table keeps the table name and the rowid of those records that need to be deleted. The procedure also uses a function called
DELETE_BOTT_ROW which takes one record of the table and tries to delete it. If the deletion fails with a foreign key constraint
violation, the function parses the SQL error message (SQLERRM) to get the name of the constraint. With the name of the constraint,
the function finds the name of the child table, all the child records that have references to the parent table primary or unique key,
and the parent key primary or unique key column name. Once the child records of the failed delete are identified, the function takes their table name and rowids
and records them into the TO_BE_DELETED table by inserting records of their table name and their rowids. Al the records inserted also contain the level (which
is 1 for the original records, 2 for child records, 3 for granchild records, etc.) and the sequence number of the order in wich they
are recorded. This way, when the function picks up a record to be deleted, it takes the one with the highest level and the highest
inserted sequence, or the "bottom" record. Once all the child records of the failed delete are appended to the TO_BE_DELETED table, it calls itself
recursevely, and the function takes the record at the "bottom" of the table and tries to delete it. If it succeeds, it calls
itself recursevely to delete the next record. If it fails, it goes and finds the child records as described before and once they are
inserted into the TO_BE_DELETED table, it calls itself again recursevely to try to delete again the "bottom" record. All records
that are successfully deleted are flagged as deleted usig the flag_del column so they are not pickt up again. Once all the (parent,
child, grandchild, etc.) records are deleted, the procedure ends without commiting, giving the option to the user to commit or
rollback deletions. The table TO_BE_DELETED is, at the end of the procedure, a list of all the records that were deleted, including their table names
and the order in with they were deleted. The user then can review its content and decide to commit or rollback.
Restrictions
============
1. Single tables only. The procedure only takes one table name and a WHERE clause to identified the records to be deleted.
2. Single columns only. Ther procedure only works with single-column primary, unique and foreign key constraints.
3. Single schema only.
4. Unpredictable results with circular references.
drop table to_be_deleted purge;
create table to_be_deleted
(tname varchar2(30)       -- table name
,rid rowid                -- rowid
,lvl number               -- level: 1=parent, 2=child, 3=grandchild, etc.
,seq_ins number           -- sequence order of record inserted
,flg_del char             -- flag deleted: Y=record deleted
,seq_del number           -- global order of record deletion
set serveroutput on size 1000000
create or replace procedure prc_delete_cascade
(p_tname varchar2 -- table name
,p_where varchar2 -- where clause identifying records to be cascade deleted
is
dummy         char;
v_sqlcode     number;
v_sqlerrm     varchar2(32767);
v_param_val   integer := 0;
v_sql         varchar2(4000);
v_ret_cde     number;
e_bad_params exception;
v_iter        number;
v_plvl        number;
v_seq_del     number;
v_max_iter    number := 1000000000;
function delete_bott_row
return number
is
    v_sql        varchar2(4000);
    v_ptname     varchar2(30); -- parent table name
    v_ppkname    varchar2(30); -- parent primary key constraint name
    v_ppkcname   varchar2(30); -- parnet primary key column name
    v_prowid      rowid;
    v_crowid      rowid;
    v_ctname     varchar2(30); -- child table name
    v_cfkname    varchar2(30); -- child foreign key constraint name
    v_cfkcname   varchar2(30); -- child foreign key column name
    v_ins        number;
    v_seq_ins    number;
    v_sqlerrm    varchar2(4000);
    v_sqlcode    number;
    e_const_viol exception;
    pragma exception_init(e_const_viol, -2292);
    e_max_iter_reached exception;
begin
    v_iter := v_iter + 1;
    if v_iter >= v_max_iter then
      raise e_max_iter_reached;
    end if;
    dbms_output.put_line('- Iter '||to_char(v_iter));
    dbms_output.put_line('----------');
    dbms_output.put_line('- Starting function delete_bott_row');
    v_sql := 'select tname, rid, lvl, seq_ins from (select * from to_be_deleted where flg_del = ''N'' order by lvl desc, seq_ins desc) where rownum=1';
    -- dbms_output.put_line('- SQL: '||v_sql);
    execute immediate v_sql into v_ptname, v_prowid, v_plvl, v_seq_ins;
    dbms_output.put_line('- Selected row: table name: '||v_ptname||', level: '||v_plvl||', seq: '||v_seq_ins);
    v_sql := 'delete from '||v_ptname||' where rowid='''||v_prowid||'''';
    dbms_output.put_line('- SQL: '||v_sql);
    execute immediate v_sql;
    dbms_output.put_line('- Row deleted !!!');
    v_ret_cde := 1;
    v_seq_del := v_seq_del + 1;
    dbms_output.put_line('- Mark the row deleted');
    v_sql := 'update to_be_deleted set flg_del = ''Y'', seq_del = '||to_char(v_seq_del)||' where tname='''||v_ptname||''' and rid='''||v_prowid||'''';
    -- dbms_output.put_line('- SQL: '||v_sql);
    execute immediate v_sql;
    -- dbms_output.put_line('- Updated table to_be_deleted, row marked deleted');
    -- dbms_output.put_line('- End of iter '||to_char(v_iter));
    dbms_output.put_line('----------');
    -- call function delete_bott_row recursively
    v_ret_cde := delete_bott_row;
    return 0;
exception
    when no_data_found then
      dbms_output.put_line('- Table to_be_deleted is empty, delete cascade has completed successfully.');
      v_ret_cde := 0;
      return 0;
    when e_const_viol then
      v_sqlcode := SQLCODE;
      v_sqlerrm := SQLERRM;
      v_ret_cde := v_sqlcode;
      dbms_output.put_line('>Constraint Violation. Record has children');
      -- dbms_output.put_line('Error code: '||to_char(v_sqlcode));
      v_cfkname := substr(v_sqlerrm,instr(v_sqlerrm,'.')+1,instr(v_sqlerrm,')') - instr(v_sqlerrm,'.')-1);
      dbms_output.put_line('>Child FK name: '||v_cfkname);
      select table_name, column_name
        into v_ctname, v_cfkcname
        from user_cons_columns
       where constraint_name=v_cfkname;
      dbms_output.put_line('>Child table name: '||v_ctname||'. FK column name: '|| v_cfkcname);
      select constraint_name, column_name
        into v_ppkname, v_ppkcname
        from user_cons_columns
       where constraint_name = (select r_constraint_name
                                  from user_constraints
                                  where constraint_name=v_cfkname);
      dbms_output.put_line('>Parent PK/UK name: '||v_ppkname||'. Parent PK/UK column: '||v_ppkcname);
      v_sql := 'insert into to_be_deleted(tname, rid, lvl, seq_ins, flg_del) '||
               'select '''||v_ctname||''', rowid, '||to_char(v_plvl+1)||', rownum, ''N'' '||
               'from '||v_ctname||' '||
               'where '||v_cfkcname||' =any (select '||v_ppkcname||' from '||v_ptname||' where rowid =any (select rid from to_be_deleted where tname = '''||v_ptname||'''))';
      -- dbms_output.put_line('- SQL: '||v_sql);
      execute immediate v_sql;
      select count(*)
        into v_ins
        from to_be_deleted
       where lvl = v_plvl+1
         and tname = v_ctname
         and flg_del = 'N';
      dbms_output.put_line('>Found '||to_char(v_ins)||' child records which were added to table to_be_deleted');
      v_ret_cde := delete_bott_row;
      return v_ret_cde;
    when e_max_iter_reached then
      dbms_output.put_line('Maximum iterations reached. Terminating procedure.');
      raise;
    when others then
      raise;
end delete_bott_row;
begin
dbms_output.put_line('Beginning');
dbms_output.put_line('================================');
-- validate p_table
begin
    select 'Y'
      into dummy
      from user_tables
     where table_name=upper(p_tname);
exception
    when no_data_found then
    v_param_val := 1;
    dbms_output.put_line('Table '||p_tname||' does not exist.');
    raise e_bad_params;
end;
dbms_output.put_line('- Parameter p_tname validated');
-- validate p_where
begin
    execute immediate 'select ''Y'' from '||p_tname||' where '||p_where INTO dummy;
exception
    when no_data_found then -- where clause returns no records
      dbms_output.put_line('Record(s) not found. Check your where clause parameter');
      v_param_val := 2;
      raise e_bad_params;
    when too_many_rows then -- found multiple records means it is ok
      null;
    when others then -- any other records means where clause has something wrong.
      dbms_output.put_line('Where clause is malformed');
      v_param_val := 2;
      raise e_bad_params;
end;
dbms_output.put_line('- Parameter p_where validated');
if v_param_val > 0 then raise e_bad_params; end if;
v_iter := 0;
v_plvl := 1;
v_seq_del := 0;
v_sql := 'insert into to_be_deleted(tname, rid, lvl, seq_ins, flg_del) select '''||upper(p_tname)||''', rowid, '||to_char(v_plvl)||', rownum, ''N'' from '||p_tname||' where '||p_where;
dbms_output.put_line('- Inserting initial record');
dbms_output.put_line('- SQL: '||v_sql);
execute immediate v_sql;
dbms_output.put_line('- Record(s) inserted');
dbms_output.put_line('- Calling function delete_bott_row to delete last row of table to_be_deleted');
dbms_output.put_line('-----------------------------------');
v_ret_cde := delete_bott_row;
-- dbms_output.put_line('- Back from function delete_bott_row');
-- dbms_output.put_line('Return code: '||to_char(v_ret_cde));
dbms_output.put_line('- End of procedure');
exception
when e_bad_params then
    dbms_output.put_line('Bad parameters, exiting.');
end;
show errors
spool prc_delete_cascade.log
-- Call to the procedure
exec prc_delete_cascade('xent','xent_id between 1669 and 1670')
select tname "Table Name", count(*) "Rows deleted"
from to_be_deleted
group by tname;
spool off
set lines 120
select *
from to_be_deleted
order by seq_del;
prompt Now commit or rollaback deletions.
-- commit;
-- rollback;Edited by: Rodolfo4 on Mar 23, 2011 10:45 AM

Interesting.
I see a few areas where this could be useful. Elimiating specific test records from a Test DB for example.
Some comments:
<li>Since this is a recursive logic you must add a stop criteria. In this case I would add a max iteration variable. If that one is reached, raise an error message and let the procedure stop with that error.</li>
<li>The when others exception at the end should be removed completely</li>
<li>The when others exception in the middle should be replaced by a specific exception that handles the -2292 error</li>
<li>A list of tables where no record should be deleted could be usefull. If the logic would encounter such a table, it should also stop. This would be to prevent that data from some system critical tables could be deleted per accident.</li>
<li>The reference from the FK constraint to the PK constraint should include the table name and if possible the owner (as long as you use user_* views the owner is always the same. But we could extend this to the ALL_* views). I never met a system where different tables have the identical FK constraint names, however just make this fool proof.</li>

PSE 8 Setup hangs (80% complete) with checking system profile message

Hello
I have a Elements 8 installation problem (Setup hang with checking system profile message). I'm running Mac OS 10.6.1 on a MacBook Pro (Processor Speed: 3.06 GHz, Memory: 4 GB) purchased mid 2009. I have contacted Adobe support and tried all of their suggestions (open case #181253338). I did reinstall OS x 6.1, ran CS$ clean script, ran cache clean tool, and many reboots. I noticed in the discussions that the install of OS X 6 has, at times, corrupted some files creating install problems. I am at a loss and would enjoy any suggestions on what to try next.

Hi,
Attached are the logs from \library\logs\Adobe\Installers
I cleared out the logs, ran PSE Setup until it hung then did Force Quit on
Setup and attached the logs.
Thanks for your attention,
Gary
From: Ankush Ved <[email protected]>
Reply-To: <[email protected]>
Date: Mon, 16 Nov 2009 07:33:58 -0700
To: Gary Nelson <[email protected]>
Subject: PSE 8 Setup hangs (80% complete) with checking
system profile message
Hi,
Can you please send in the log files which can be obtained from the below
location:
\Library\Logs\Adobe\
There must be log files for the PSE 8 installer. Delete them once and then
try to install PSE 8 again, if you are not able to then attach the newly
created log files in the forum.
Thanks & Regards,
Ankush

I can not delete process with correlation

Hi,
WE have an XI 3.0 SAP system (stack 16) and I cannot do exactly what SAP Note 807906 ("BPE-TS: Deleting process with correlations") describes:
If you are certain that the process is no longer required, call the log of the affected process (using the process selection (SWF_XI_SWI1)) or the SXMB_MONI, ... and display the work item of the process (Workflows).
Go to the technical work-item display (if this is not displayed by default) and then select Edit => Change there.
Under 'Services for Administration', select the 'Logical Deletion' function.
In my case, after going to the "work-item display", the "change" option appears in grey and cannot be selected... burtnot only this option cannot be selected but most of them in the wholw menu...
¿Any clue of what´s happening?
Regards

Hi,
Thanks for the answer.
The fact is that TX SWWL is the same as report RSWWWIDE (it deletes physically in DB and affects the workload). The difference with TX SWF_XI_SWI1 is that I could delete entries of my choice logically and I would have to wait only for the next table switch....
I would like to try to make TX SWF_XI_SWI1 working well...
thanks,

How could I delete files with name string with "TAL" and older than 05.05.

How could I delete files with name string with "TAL" and older than 05.05.2009 on unix

Our ECC Ides system today was not responsible. For first time 17 users were working on the systtem (IWN2008/SQL2005 based). Before the people were maximally 5.
The server is done by making a homogeneous system copy from an blade machine(now it is an VIrTUAL)
There was enaught disk space. However I checked Wokload 03sdn transaction) inn system. and found out that at that time of restarting(I had to restart system 3 times to get logged on the system and even then it was almost unresponsive.
I can found in there top abap."Login_Pw", "SESSION_MANAGER", "?". (BAtch), "ADMSBUF, >DEleyed Function call, RSPOWPOO""RSWWclear", ""VA01", "SAPMHHTP "Buf Sync" >DDLOC CLEANUP)""rsbtctE"
What can I do?
¸
Who could interfer SAP_CCMS_MONI_BATCH_DPSAP_CCMS_MONI_BATCH_DP
the 2 main users under users profile were ZUGTIN running and SAPSYS( running many system jobs)
How to approach the problem

Deletion Log for output types

Hi all,
Where can i find the deletion log for output types
need to know the username and timestamp.

Hi Mayank,
some of the NACE settings are customizing.
If you enabled the customizing change recordings (which should be ALWAYS enabled on dev system's client), you can browse the changes with the Change Log Browser of customizing tables
To enable the client recording, please find
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7e/c81ec852c511d182c50000e829fbfe/content.htm
If recording was not enabled, no change logs are availible.
You may reconstruct "old" values by drilling into (released) TMS customizing transports to see which values where included but that's pretty technical view of data.
Best regards,
Matthias

RMAN9I HOW TO RESTORE ARCHIVE LOGS WITH LIMITED DISK SPACE

제품 : RMAN
작성날짜 : 2002-12-09
RMAN9I HOW TO RESTORE ARCHIVE LOGS WITH LIMITED DISK SPACE
==========================================================
PURPOSE
이 자료는 Oracle 9.2 이상의 RMAN에서 사용 가능한 MAXSIZE 기능에 대하여
설명할 것이다.
How to restore archive logs with limited disk space
Old Backup을 사용하여 RMAN으로 database를 recvoery할때, 모든 archived
redo logfile들을 Restore할 destination의 disk space가 모자란 경우를 종종 만난다.
이러한 경우 여러 개의 restore and recovery job으로 나누어 수행한다.
즉, 첫 번째 restore and recovery job이 끝나면 archived redo logfile들을 지우고
다음 적용될 것들을 restore한다. 그리고 다시 Recovery를 수행한다. 이러한 작업을
원하는 시점까지 recovery를 하기위해 반복적으로 수행한다.
Oracle 9iR2(9.2.0.x)부터 RMAN은 MAXSIZE option을 제공하는데 이것은 archive log
file이 restore될 disk의 space를 control할 수 있게 해 준다.
만약 disk space가 매우 제한적이라면, 즉 예를 들어 모든 archive log의 size 합보다
disk free space가 적다면 MAXSIZE option을 사용하는 것은 매우 유용하다.
이 OPTION이 기술되면 RMAN은 Media Manager에게 disk space 크기에 부합하는 만큼만
archive log들을 restore하도록 한다. 부가적인 restore operation들은 restore된
마지막 archive log가 적용될 때마다 발생한다.
MAXSIZE option은 이러한 작업들을 하나의 rman job으로 처리하게 해 주고
실수를 하지 않게 해 준다.
아래는 MAXSIZE를 설명하기 위한 예제이며 총 6 단계로 구성되어 있다.
STEP 1: Add data to the database to enforce log switches
STEP 2: Backup the database and archive logs and delete the logs
STEP 3: Add additional data to enforce new log switches
STEP 4: Remove the data file and simulate a database crash
STEP 5: Restore the data file from the backup
STEP 6: Recover the database using MAXSIZE
위 예제는 Unix와 Windows 모두에 적용될 수 있다.
STEP 6 는 다음과 같은 조건으로 두 번 수행될 것이다.
1) MAXSIZE가 archive log size보다 작은 경우:
이 경우 RMAN-6558 Error message를 만나게 된다.
그러므로 MAXSIZE를 archive log보다는 크게 설정해야한다.
2) MAXSIZE가 archive log size보다 큰 경우:
예를 들어 여러 개의 archive log를 포함할 수 있을 정도로 크게 설정하면
restore/recovery는 user에게 transparent하게 수행되어진다.
즉 archive log들은 restore된 후 applied되고 deleted되어 진다. 다시 새로운
archive log들이 restore되어지고 applied된 후 deleted 되어 진다. 이러한 작업은
recovery가 끝날 때까지 반복되어진다. 이러한 작업들이 진행되는 동안 RMAN은
아무런 Message도 발생시키지 않는다.
# Step 1: INSERT enough new data to generate log switches
create table rman_tst (col1 varchar2 (10));
begin
for i in 1..30000 loop
insert into rman_tst values(i,'test');
commit;
end loop;
end;
# Step 2: BACKUP the database and the archive logs automatically
# and then delete the input
run {
backup database format='/web01/usupport/krosenme/admin/backups/db_%d%s%t'
plus archivelog format='/web01/usupport/krosenme/admin/backups/arch_%d%s%t'
delete input;
# Step 3: INSERT enough new data to generate new log switches
begin
for i in 1..30000 loop
insert into rman_tst values(i,'test');
commit;
end loop;
end;
# Step 4: REMOVE users01.dbf file and crash the database
mv users01.dbf users01.org
shutdown abort
# Restore is now needed as the data file is deleted. The backup was
# taken before the new data was added to it, thus archive logs are
# needed to bring the database up to date
# Step 5: RESTORE the data file from the full backup
run {
restore datafile '/web01/usupport/krosenme/oradata/kro_920/users01.dbf';
# Step 6: RECOVER
run {
recover database delete archivelog maxsize 10 K;
# This will fail with RMAN-6558 as the archived log has a size of 16 KB,
# which is bigger than MAXSIZE limit of 10 KB. So the error is expected
# and MAXSIZE works as designed.
# Now rerunning STEP 6: but with MAXSIZE 50 K
run {
recover database delete archivelog maxsize 50 K;
RELATED DOCUMENTS
Recovery Manager Reference, Release 2 (9.2)

cold backup means offline backup, you shut database normally and copy datafiles to another location.
i think operating system does not matter that much but it is RedHat Linux Enterprise Server.
backing up archivelogs whith rman script which is:
run {
allocate channel c1 type disk format '$BKUPLOC/arch_%d_%u_%s_%p.bkp';
change archivelog all validate;
sql 'ALTER SYSTEM ARCHIVE LOG CURRENT';
backup archivelog time between 'SYSDATE - (30*60/(60*60*24))' and 'sysdate';
release channel c1;
so here is the details.
1. because everything is lost, we restored all files(datafiles, controlfiles, redologs etc) from offline backup meaning copied all files from another location to corresponding location.
2. want to apply archive logs which were created after cold backup till disk failure and we have these archive logs with backups which were taken by rman.
So
first of all, we want to register these archive log rman backups(because these backup information does not exist in restored controlfile)
and then restore them and then apply them.
we need rman commands to register these backups and restore them.
Regards,
Kamil

Couldn't log into SAP System (message 00264) after SAP_BASIS update

Hello,
we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
We have no idea why correct and existing statuses are not working.
Please suggest us what to do to fix this problem.
Thanks in advance!

Check this,
http://forums.sdn.sap.com/thread.jspa?threadID=835278
it may be useful.
Regards,
Ravi

Delete logs with SLG2 : system KO

Similar Messages

Maybe you are looking for