Delete system alias

hello all,
I deleted a system object, before deleting its system alias. Could anyone tell me how to delete the system alias? I tried searching for the system alias in the System Landscape overview too. I did not find the system alias. If anyone has answer to this, please share with me. I will appreciate your help.
Thanks,
Sunitha.

Hi Sunitha,
Goto system administration -> system configuration -> system landscape overview. All the system and their alias are available here. But removing the alias is not possible this way.
What I suggested will work. You must create the same system with the same name.
Check this thread on the same
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=182555">Thread on system alias</a>
Regards,
Saravanan

Similar Messages

How to delete System Alias while the related sytem has been deleted

How to delete System Alias while the related sytem has been deleted?
When I deleted the System, I ignored the dependence object. Now i need to deleted the sytem alias, but the system has already been deleted, how could i do?
Thank you very much!
Regards,
Xiaoming Yang

hi Yang,
checkout the link..,
Re: EP 6.0.13.0 : iView : System Alias
hope it helps..,
regards,
Vinoth

System Alias reappears in the System Configuration

Hi All,
This is a bit of a strange one but I wondered if anyone else has ever come across this with EP6 SP2.
I have a System Object which I do not want to delete, since it might be required again in the future, so I am just removing the system alias to render it inactive.
Overnight something causes the system alias to reappear and hence for the option in the user mapping drop-down to reappear too.
I think my only option is to delete the system completely from the PCD.
Any ideas?

Thanks both for your advice.
I have found out that this is in fact a "feature" in SP2 that if the alias is removed, but a user who has personalised this particular user mapping system logs onto the Portal afterwards, the alias is automatically recreated.
Rgds,
Marc
Message was edited by: i022156

Maintaining a System Alias List

Hi,
I want to open System Alias Editor. In the System Landscape I expand Portal Content, right-click a system name but I can't find Open -> System Aliases.....
Anything wrong???
Any suggestion is appreciative
Tony

Hi Tony,
Are you sure you got all the authorisation in portal to define a system ? If yes, check if there isn't a lock object on this system. Sometimes EP60 don't delete lock object automaticly , so you can't modify else the definition until you delete manually the lock entries in portal.
Normally, when you right-click on a system you should see Maintain then in a sub-menu you should find 3 entries which are : Object/Aliase/Authorisation .
Regards.
Bertrand

Problem in creation of system alias for bw system

Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PM

Hi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid.

Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao.

Different System Alias in one iView

Hi all,
I have an ESS/MSS Szenario based on EP7 SP13 and HCM (ECC 6). I have setup the business package and all is working fine. I have setup the different System Aliases like SAP_R3_HumanResources and SAP_R3_HumanResources_Meta etc. and I have a working Single Sign On between my Portal and the HCM system.
I now face the challenge to change one link within the working time iView to point to a different system than all the others!
Let me explain: I have a second ERP 6 system that provides for the actual working time Web Dynpro and this Dynpro is not provided by the HCM system. I think I need to change the target for this one Dynpro to point to the ERP instead of the HCM system while all the other links in the working time iView still have to point to the HCM system!
I have no idea whatsoever, how to do this. I checked the PCD but I can't seem to find the right place where to adapt the System Alias for an iView at all. Can someone point me in the right direction?
Kind regards,
Christian

No you're not
In fact you lack the System and System alias that point to you're new ERP 6.
Here a link with a demo that explain how to create the system and define its alias : [demo|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24d8faf9-0701-0010-c99c-aabbdb7e95f4] .
Informations needed are the same you can find in a saplogon for the system you want to connect to.
Once you'll have defined system and alias you'll see it in you're listbox!
Anyway you'll still face the last problem : you can't define multiple system alias for the same iView.
Hope that helps!!
Edited by: Seb on Jan 9, 2008 4:34 PM

Apple has just deleted my alias - which I was using as my main email address. They deny me creating a new one for 7 days. How can I get in touch with Apple so that they repair what they have broken?

Has anyone had a problems with their alias today?
Apple has deleted mine today; causing me a major headache as they deleted the alias that I use as my main email address.
What happened exactly, is that the @icloud.com alias remained, but the @me.com disapeared. So that the John.Smith alias became valid only for [email protected], but [email protected] disapeared.
To try to restore the situation, I deleted the alias, with the hope of re-creating it: but bad luck, that option is not open to me as I have had 5 aliases active till today, and they now only give you 3, and even once I had deleted 2, they would not allow me to set-up a new one for 7 DAYS.
I can't be without email for 7DAYS, care of Apple. Calling AppleCare does not seem to help, and the line gets dropped once I have explained the problem.
Please help me raise someone at Apple to fix this.
Alain

See this discussion, https://discussions.apple.com/message/19779377#19779377

Creation of System Alias between Portal and E Sourcing System

Hi Team,
I would like to create a System Alias between SAP Portal 7.4 and E Sourcing System 10.0. I would like to know during the creation of System Object which template i need to take (is it http System or R/3 System using Load Balancing).
If it is a HTTP System, I am getting ""Could not find Connector Factory value: null"".
Could you please help me in knowing what could be the issue.
Pls. Note: E Sourcing is a Java based SAP System.

Hi Sankar,
Please go through the below SAP Note and see if that helps.
711769 - SSO between SAP Java Software Products
BR,
Anurag

Connection tab is inactive during the creation of system alias in portal

When we trying to implement the note 1249323, during the creation of
system alias in portal (Step B in SRM 7.0), the connection tab is
inactive to fill the information (EP-PCT-SRM).
Please can anybody give a solution to this problem so that we can finish our
implementation of the note.
Thanks and regards
Mahesh

If you are referring to the property "Collection" of the system object - I don't think you can edit it. It is not used at runtime by the applications/iviews.
That should have been a mistake in the SAP note and you can ignore that property and go ahead with creating your system.
Thanks,
Shanti

System alias does not work if not the same as logical system name?

In most of the situations, we define the portal system alias same as the connected R/3 client logical system name.
I also saw some exceptions that system aliases were defined differently from the connected R/3 client logical systems, and they were tested fine.
However I forget the way to make that working.
Could you help me recall how is that achieved?
Thanks!

Hi,
There is nothing tricky here. Just assign more System Aliases to the system connector !

HT4897 I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?

I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?
I'm trying to make iCloud mail my primary email but I'm concerned that I may have lost the perfect email address forever.

I have the same problem. After our wedding I've created an alias ([email protected]) to my actual AppleID Account ([email protected]). Now I'd the idea to delete the alias and my actual AppleID to create a new AppleID with ([email protected]).
Is there really no possibilty to do this?
Thanks in advance for quick and positive feedback.

Unable to create system Alias.

Hi All,
I Created one system object , but i am not able to create system Alias.While creating system Alias it throws this error " This system object is restricted and u can't create System Alias". Exactly what is the prob?What is the solution?
Thanks in Advance.

Hi,
system object is restricted
1. Make sure you have required permissions to create the system object. You should use administrator user to create the system.
2. Check the object properties and permissions.
Refer following procedure to create the system object and see if you have missed any step.
http://wiki.sdn.sap.com/wiki/display/EP/11Systems-+Creation
Regards,
Varun

System Alias is not coming in dropdown of System under Find Data Services

I am having role in VC.
In Visual Composer studio. I Clicked on Find Data option at right pane of the window to get
Find Data Services window.
In this window, I am not able to see the system alias from the dropdown list of the System field.
Appreciate your help.

Hi
Inside Visual Composer , Goto Tools >Options> Compiler .
Remove the Checkbox for Mask Unsupported Features.
Click Ok.
Now try the Find Data
It worked for me.
Regards
Rajendra

Ever since enabling Soft Delete on one of my tables, the logs are flooded with "... does not support the 'deleted' system property"

I enabled Soft Delete on one of my Azure Mobile Services tables, and ever since then, the logs are flooded with tons of warnings that say something like this:
The table 'Section' does not support the 'deleted' system property.
Is there a way to suppress these warnings, or is it advisable to enable soft delete for all of my tables?
As a follow on, is there a way to export the logs so that it's easier to peruse through them and search?
Thanks :)

Hi
You can set your logging level in Azure Admin portal to be Error only, so it only logs errors and warnings will be ignored.
Regards
Aram

Delete system alias

Similar Messages

Maybe you are looking for