Delete transaction in SNP and data inconsistency in product view

Hi,
After i run the  SNP heuristics,system is creating PurRequisition say in DC 1500 sourcing from 1510. But in the product view of 1510 location,there is no PurReqRel is visible.This is happening for some products. And also when i use Delete transaction, /SAPAPO/RLCDEL - Delete Transaction Data , i am getting the messages orders are deleted. But when i look in product view,orders are not deleted. This issue is for all the products. we are using SCM5.0. I have run all the consistency checks like OM17,time series check etc. Any one got the same issue?
Any suggestions?
Thanks & Regards
Akthar
Edited by: Aktar Ahmed Shaik on Nov 17, 2009 3:51 PM

Hi Akthar,
Please raise this question in SCM-APO Forum as i hope there is no problm in R/3.
Regards
Suri

Similar Messages

  • Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...

    Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...

    Nope....I know. i need to blame myself. it just asked me when i pluged the phone to my pc for the first time since looong...
    so. its okay. i had a back up with some pictures and some contacts and all that.
    the install process just got an issue so it stoped half way through and i could only completely start over.
    i was mad. now its okay

  • Bulk 2.0 Deletion of Field mapping and Data

    I have created a Account Export field mapping using Bulk 2.0 API and after creation, I tried  SYNC and retrieved the Data. This was completed without issues.
    Then I tried  deleting export entity from Eloqua using an HTTP DELETE request.
    Using HTTP DELETE,."accounts/exports/24/data";I tried deleting the data.
    The request was successful, Eloqua returned a 204 response.
    But Using Get request, I was able to retrieve the data again. It wasn't deleted
    Again,Then I tried deleting the mapping itself, I got the status as '204 No Content'.
    The data got deleted but  When I tried '/accounts/exports', the mapping still exists there.
    Is anyone aware of this issue and also how to resolve this?

    I finally found it. Its mapping's are present in FieldTypes class. Even though its not mentioned in the API.

  • BP data missing in some Lead transactions of MSA.(Data Inconsistency)

    The BP information(Company name & Contact person) is NOT getting displayed on some of the Lead transactions on MSA. Although,it is displayed on most of the Lead transaction on MSA.
    1) If I download say 20 Leads from CRM Server to MSA, the BP data is missing only on some 4-5 Leads. All other Lead have the correct BP information.
    2) And, if 2 Leads are downloaded for the same BP, 1 Lead has the BP data whereas the other does NOT have it.
    -This shows that the BP data is available in MSA database but it is NOT displayed on the MSA tileset.
    -Also, we are able to pull the BP (Activity Partner & Contact person) under the respective BP search on MSA.
    We checked the Client SQL database table and all the data (Master & Transaction) are present there.
    However, when we check the tables for the Lead where BP is missing, the BP information is NOT available. i.e, the BP information is not available at the table level for that particular transaction.
    In spite of all the Master data available in database level.
    Can anyone please help us with this?
    Thanks in advance.
    Jags.

    Hi there,
    Yes.We are able to reproduce it as and when we want the "error samples".
    One more finding, we DON'T see this issue on DEV setup. It is working fine.
    However, when we try to upload the same flat file containing 24 Leads on Testing environment, invariably we get the "BP data missing" at least for 3 Lead transactions.
    This is the case on Production environment as well.
    We are already contemplating on OSS ticket.
    Thanks for your help.
    Jags.

  • Forecast Consumption in APO- No Data Available in Product View

    Hi Experts
    I facing some problem in Forecast Consumption in APO. The APO system is connected to a R/3 system. So data relevant for Forecast consumption comes from R/3.
    The allocation indicator in the requirement class assigned to the strategy maintained in the product master is set as " no consumption with customer requirement". and the same is transfered to APO.
    I have the changed the settings in APO and here are the setting maintained in APO to enable Forecast Consumption.
    Product Master Setting:
    a) Consumption Mode: 2 ( forward and backward)
    b) Consumption Period: ( 30 days both backward and forward)
    c) Strategy Group : 20 and assignment mode is set to "Assign customer requirement to planning with final assembly" and category group has sales order - BM
    d) The check mode setting in the ATP tab is set to "Assign customer requirement to planning with final assembly"
    I have a forecast for today's date and a sales order transferred from R/3 for the same date. But I do not see any data in the Forecast tab in the product view ( /sapapo/rrp3 Tcode)
    Please let me know if I am missing any setting in APO. Or the SAles order carries the strategy information from R/3 and influencing the consumption any way.

    Hi,
    What is your Forecast & Sales order quantity? If these are same then sales order consumed forecast, so you can not able to see in the rrp3.
      Second thing try to increse the forecast quantity than sales order quantity & then check it.
    Regards
    Sujay

  • Delete Social Security number and date of birth upon submit.

    I have created a fillable form in LiveCycle Deseigner ES (version 8.2) for our Store Managers to use - to fill in new hire information to submit to our Corporate Office.  At the bottom of the form I have 2 buttons - a Print button and a Submit button.  We would like them to fill out the form with all information, including the social security number of the new hire and to use my print button to print the completed form for their records.  That is easy enough.  However, what I am being asked to do with the submit button is kind of complicated.  I am being asked to program the submit button so that it deletes the social security number completely before the send so that we are not e-mailing a completed .pdf form with a social security number on it.  How can I accomplish this?  If it requires inserting programming code on the XML source tab of LiveCycle Deseigner ES, I will need specifics.    Thanks!

    Thanks!  Your answer was very helpful and I found it to be 99.9% correct.  However, it ended up that I needed to attach that code to my SSN field and not my Submit button.  So, in my case, this is what it looks like when I click on my SSN field after I added the code:
    topmostSubform.Page1.SSN::preSubmit:form - (JavaScript, client)
    SSN.rawValue = "";
    I did the same thing for my date of birth (DOB) field:
    topmostSubform.Page1.DOB::preSubmit:form - (JavaScript, client)
    DOB.rawValue = ""; 
    I tested the form after the changes and it worked great.
    You are a life saver.  Thanks again! 

  • HT1414 apple logo flashing . will restoring delete all my images and data files ?

    while updating the apple logo started flashing .
    i cnnctd my phone to the i tunes .
    want to restore bt want to knw dat will all the images and messages will be deleted if i restore my phone

    Your data is already gone if itunes is saying your phone needs to be restored.
    If you have a backup, you can restore to that backup, if you don't have one, then there gone.

  • I cannot log out of iCloud without it threatening to delete all my photos and data.

    I am logged onto iCloud and have the photos and Documents/Data options checked, but when I go to log out, it asks "Do you want to turn off iCloud photos (or iCloud Documents/Data) If you do you photos that have not been imported will be deleted from this Mac"!
    What is going on?
    I just want to log off!
    I don't care if I never use iCloud again, but it is threatening to delete all my contents.
    What is the name of all that's sane is going on?!
    Julian

    The iCloud Photo Library have mistakes, you only need close Safari, or your browser and enter again, and look if already you are out from iCloud. Your photos in iCloud not be affect.

  • HT201274 hello i have just deleted content and data from my iphone now my phone doesnt show anything

    hello i have just deleted my iphone content and data from my phone. now my phone just shows apple logo with bars it does not log into windows. what do i have to do to get my iphone working

    Try Here  >  http://support.apple.com/kb/HT1808
    Be sure to follow All the Steps...

  • Delete individual Plnning books and dataviews. without a transport

    Hi Experts,
    I am trying to delete individual planning books in Production system, the problem is I cannot transport the whole planning area as some of the settings in development were changed, so i have to delete the planning books and data views indivudually.
    How do i proceed further.
    This is little critical, any suggestion is greatly appreciated.
    thank you very much for your time and suggestions.
    Regards,
    K
    Edited by: APOquest APOquest on Apr 30, 2009 11:39 PM

    Hi ,
    Any planning book change say creation / change / deletion can be transported without transporting the planning area .  To transport the planning book deletion alone , first delete the planning book and save that in a transport.
    Release that transport to the target system and your planning book and data views will get deleted in the target system. The macros books associated with the planning book will also get deleted . The planning area will remain unaffected .
    Here is the procedure to transport a planning book creation / change  without transporting the planning area :
    Go to your planning area , and open it and in the go to menu choose " transport connection for DP and SNP " . It will take you to the transport connection transaction. There select the option to transport the planning book alone and do not include the planning area .
    When this transport is released the planning book will get created / changed in the target system .
    Thanks
    Saradha
    Edited by: Saradha Ramesh on May 1, 2009 12:35 AM

  • How to find unsued Transfer Rules and Data Sources for a Master Table...??

    How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

    Hi
    Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
    Cheer
    Ans as expected, Please reward

  • Reading MS Project column names and data on the fly from a selected View

    Hi guys,
    I have several views on my project file (MSPROJECT 2010) and I want to build a macro so that;
    1. User can select any view ( Views can have diffrent columns and the user may add new columns as well)
    2. User runs the Macro and all the coulmns along with the tasks displayed in the view will be written to a excel file. ( I don't want to build several macro's for each view, I'm thinking of a common method which would work for any selected view)
    The problem I'm facing is that how will i read the column names and data for a particular view on the fly without hard coding them inside the vba code ?
    The solution needs to work on a master schedule as well.
    Appreciate your feedback.

    Just to get you started the following code writes the field name and data for the active task to the Immediate window.
    Sub CopyData()
    Dim fld As TableField
    For Each fld In ActiveProject.TaskTables(ActiveProject.CurrentTable).TableFields
    If fld.Field >= 0 Then
    Debug.Print Application.FieldConstantToFieldName(fld.Field), ActiveCell.Task.GetField(fld.Field)
    End If
    Next fld
    End Sub
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Is there a way to manually custom-edit the "Date created" and "Date modified" attributes of files in Mac OS 10.6?

    In "List View" in a Finder window, among the many column options are "Date created" and "Date modified." In "View Options" (command-J) for any folder, one can add these columns, along with the standard ones "Size," "Kind," "Label," etc.
    A user can alter a file's name, and a file's "label" (i.e. its color). On the other hand, a user can NOT arbitrarily edit/alter a file's official "size" -- other than by physically altering the contents of the file itself, obviously.
    But what about a file's "Date created" and "Date modified"? Can either of those be manually edited/changed, just as a file's name can be changed -- or is a file's creation-date an immutable attribute beyond the editorial reach of the user, just as a file's "size" is?
    And yes, a person can "alter" a file's "Date modified" by simply modifying the file, which would change its "Date modified" to be the moment it was last altered (i.e. right now). But (and here's the key question) can a user somehow get inside a file's defining attributes and arbitrarily change a file's modification date to be at any desired point in the past that's AFTER its creation date and BEFORE the present moment? Or will so doing cause the operating system to blow a gasket?
    If it is possible to arbitrarily manually alter a file's creation date or modification date, how would it be done (in 10.6)? And if it is NOT possible, then why not?

    sanjempet --
    Whew, that's a relief!
    But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
    I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
    The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started!

  • A tool to export a video of DIAdem VIEW, playing a synchronized video, map, audio and data

    It's very common you need to do a presentation with several information and if you can put a video playing a synchronized video, map, audio and data graphs, like DIAdem VIEW do, your presentation will be cause a excellent impression. To do this today you need a capture screen toll, If DIAdem have a native tool to do this it would be great.
    

    Hello,
    Today I tested the screen capture software Camtasia Studio 8 and this works really good. The files can be saved as an AVI file and different qualities can be chosen, which gives some flexibility in the file size. The screen capture is working fast, so if I run with 1 Hz the VIEW layout with a map and several 2d graphs all the frames are captured.
    With kind regards,
    Stijn

  • Data inconsistency: posting with restricted transaction type (FAA_POST047)

    Hi colleagues!
    I have the following error:
    Data inconsistency: posting with restricted transaction type
    Message no. FAA_POST047
    Diagnosis
    You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
    System Response
    Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
    Procedure
    Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
    According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
    Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
    Any ideas how to solve?
    Thanks in advance

    Hi Anton
    This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
    Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
    Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
    please verify and let us know the update. hope this helps
    Best Regards
    Jomon

Maybe you are looking for