Delete values for 0CALMONTH in QDesigner

Hi gurus..
I have a trouble in my Query designer.
When i try to select the values for 0CALMONTH, this show me a lot of values that i was load data for this cube.
I want to delete some values for this screen (for example 01.0000 or 02.0000), this items come from a wrong load data that i delete from the cube.
What´s the way for delete completly this kind of values?
Can you help us with this?
TY ...
Neo

Hi,
you can set this property in the <i>Info provider specific settings</i>.I.e you will set the F4 functionality to read from the infocube .So that it will shoe you only values for which there are entries in Info cube.
Refer <i>Structure-Specific Properties of the InfoObject</i>in the below link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a644ce07211d2acb80000e829fbfe/frameset.htm
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Similar Messages

Delete value for PART_PRCTR (Partner Profit Center)

Dear,
I would like to delete value for partner profit center if business partner is empty when I load data from R3 into BW. I use routne.
I have code:
if COMM_STRUCTURE-PART_PRCTR is not initial.
if COMM_STRUCTURE-PCompany is initial.
??? I would like to delete value for Part_PRCTR, but I do not know how can I use code.
Please help me.
Thank you in advance for your help.
Regards,
anka

not sure where exactly you are adding code.
but in normal ABAP it would be
clear COMM_STRUCTURE-PART_PRCTR

Delete values for a range

Hi ,
I want to delete records only for a given range. Below is the script it deletes the records based on the given MP range.
And in this Switch table screen shot i have a switchID and ControlPointID column as main reference . For the given range only those records will be deleted. Now i want to delete a different table called SSDB_WIUDATA only for the controlpointIDs deleted on
this switch table. The scenario is ControlpointID will be same even out of the given range also.but switchID will be different So it was easy to delete the records in switch. But while deleting in WIU data i have WIUDataID and ControlPointID as main
column reference . How do i delete the values from WIUData only for the values deleted in switch table? Here ControlPoint ID will be same even out of the range also. So i should delete only within the range that is deleted in Switch table. I dont have Milepost
refernce also in WIU table.i have only ControlPointID as reference. Pls help me
IF (CURSOR_STATUS('global','Switch_cur')) >= -1
BEGIN
DEALLOCATE Switch_cur
END
DECLARE Switch_cur CURSOR FOR
Select SwitchID,ControlPointID FROM SSDB_Switch
WHERE Milepost BETWEEN @BeginMP AND @EndMP
AND SubdivisionID = @subdivisionID
OPEN Switch_cur
FETCH NEXT FROM Switch_cur INTO @SwitchID,@ControlPointID
WHILE (@@FETCH_STATUS=0)
BEGIN
set @Swi = (select Talon_LocEqup_ID from Mapping
where SSDB_ControlpointId_Asset_Id = @SwitchID and AssetType='PTC-Switch')
Delete from tbl_equipmentObjectPropertyValues
where equipmentObjectPropertyValue_object_guid_fk = ''+@Swi+''
Delete from tbl_objects
where object_guid_pk = ''+@Swi+''
DELETE from Mapping
where SSDB_ControlpointId_Asset_Id = @SwitchID
DELETE FROM SSDB_Clearancepoint
WHERE SwitchID = @SwitchID
DELETE FROM SSDB_TurnoutSpeed
WHERE SwitchID = @SwitchID
DELETE FROM SSDB_SwitchRelationship
WHERE SwitchID = @SwitchID
DELETE FROM SSDB_Switch
WHERE SwitchID = @SwitchID
FETCH FROM Switch_cur INTO @SwitchID,@ControlPointID
END ----Cur End
CLOSE Switch_cur
DEALLOCATE Switch_cur
Deepa

Below is the table structure of Switch and WIUData
CREATE TABLE SSDB_Switch (
SwitchID int IDENTITY PRIMARY KEY,
ControlPointID int,
WIUDataID int,
MilepostPrefix varchar(5),
MilepostSuffix varchar(5),
Milepost decimal(10,3) NOT NULL,
TrackName varchar(20) NOT NULL,
Latitude decimal(15,8) NOT NULL,
FOREIGN KEY(WIUDataID) REFERENCES SSDB_WIUData(WIUDataID),
FOREIGN KEY(ControlPointID) REFERENCES SSDB_ControlPoint(ControlPointID)
CREATE TABLE SSDB_WIUData (
WIUDataID int IDENTITY PRIMARY KEY,
ControlPointID int,
DeviceStatusTableID int NOT NULL,
BeaconFlag varchar(1) NOT NULL,
ConfigCRC varchar(8) NOT NULL,
EncryptedHmacKey varchar(64) NOT NULL,
WIUAddress varchar(64) NOT NULL,
WIUID decimal(12,0),
WIUName varchar(40),
WSRSType varchar(17),
InsertDate Datetime NOT NULL DEFAULT getdate(),
UpdateDate Datetime,
InsertUser varchar(50),
UpdateUser varchar(50),
FOREIGN KEY(ControlPointID) REFERENCES SSDB_ControlPoint(ControlPointID),
FOREIGN KEY(DeviceStatusTableID) REFERENCES SSDB_DeviceStatusConfiguration(DeviceStatusTableID),
FOREIGN KEY(BeaconFlag) REFERENCES SSDB_BeaconFlag(BeaconFlag),
FOREIGN KEY(WSRSType) REFERENCES SSDB_WSRSType(WSRSType)
Below is the screen shot for Switch for a range of 170 to 172 Milepost.For this range i have control point ID as 48. And even ControlPoint ID is same for 173 Milepost also. In switch i have deleted only for the range.
Below is the screenshot for WIU table . Here i have only ControlPointID as reference. Even in this table i should delete only the records deleted in switch table.
Deepa

NOt able to get text value for 0calmonth in the query

hi,
I am not able to get the test for the calmonth in the selection screen of the Query.
i.e If the user enter the value 01/2010 as input in the selection screen. I am not able to get its text Janurary 2010 displayed in the selection screen of the query.
please let me know what could be the reason for this.
regards,
Mahesh

Hi Mahesh,
I regret to inform you there is no option to display the month text.
The system works as designed. The "Key and text" option for the
infoObject is for display the technical name and the description.
I found a customer on SDN which the same doubt and the answer for your
question. Please, check the link below:
0calday text variable
Best Regards,
Des

BW 2.0B, info package selection, cant use two system variable for 0CALMONTH

Hi Experts,
I am working on BW 2.0B in APO system. There is an info package for which I want to supply two selection value for 0CALMONTH as equal to current month and last month. System variables 0CMONTH (for current month) and 0CMLMON (for last month) are available but I am not able to use them both.
If I change the variable in one selection, it automatically changes the other one too, making both the selection as same variable.
Can you suggest any solution/idea?
Regards,
Purvang

any ideas to achieve this?

Multiple values for Time Characteristics (Ex: 0CALMONTH) in planning layout

Hello,
We are on BW - BPS 3.5v
We have a realtime infocube with only time characteristic 0CALMONTH.
There is a requirement that in my Planning layout I have to display the Keyfigures for:
(CURRENT MONTH) (CUMULATIVE 4 MONTHS FROM CURRENT MONTH) (CUMULATIVE 7 MONTHS FROM CUR MONTH)
I defined 3 exit variables on 0CALMONTH , one for Current Month, one for All 4 months from Current Month and another for All 7 months from Current Month.
In my planning layout when I use these variables for 0CALMONTH, I don't get the values for 4 months & 7 months.
I checked the variables are being populated with correct values. But when they get passed to the layout it doesn't read the Cube.
I got the basic doubt if we can give multiple values for the time characteristics in planning layout..??
Thanks for any suggestions.
Vish

Hi.
Did you created 3 restricted KF: one with KF amount and variable current month, second with amount and variable 4 monthes, third with amount and variable 7 monthes ?
Did you have match records in you cube ?
Regards.

YTD,QTD & MTD values for variable under 0CALMONTH

Hi Gurus,
I need to calculate YTD,QTD & MTD values for a KF based on the value that the user enters in the variable under 0CALMONTH.
I have the code for how it can be done using 0CALDAY but not sure for 0CALMONTH.
Can you share the ABAP code for this requirement.
Your help will be greatly appreciated.
Thanks
Arvind

Hi,
Based on the month entered by the user, take First day of the month in teh exit,
1. YTD : Take SY-DATUM and calculate YTD
2. QTD : Based on the Month you calculate Quarter
3. MTD : Take SY-DATUM and calculate MTD
*Note: * If they give only Month want to date meanes, only SY-DATUM will be accepeted, because they are not passing 0CALDAY
Thanks
Reddy

Error while deleting values of characteristic /1FB/COMPANY/Company (RFC des

Dear all,
I am trying to synchronize Company master data between local BCS system and SAP BW with UGMD_BATCH_SYNC program. In the synchronization mode, Full Synschronization (Write and Delete) was selected.
However, I receive the following error message when executing the program:
Error while deleting values of characteristic /1FB/COMPANY/Company (RFC destination )
Message no. UGMD077
Diagnosis
When writing or deleting values of characteristic /1FB/COMPANY/Company errors occurred in the system with RFC destination . As the changes have already been defined in the local storage location this results in the master data being asynchronous between the local and remote storage location.
System Response
Processing is continued.
Procedure
Carry out a manual synchronization of the master data later using report UGMD_BATCH_SYNC. You can find additional information there under Application Help.
FYI, RFC Destination for my data basis is left blank.
What may causes this error and how to resolve it?
Thank you.

Hi MontyBurns,
May I know what settings that I need to check in UGMDSYNC program? As far as I can tell, there is only one parameter that we need to specify in the program i.e. Field Name. As I am trying to synchronize from BCS to BW, I have chosen the followings settings:
Source = LOCAL
Target = ALLBW
All,
Interesting thing that I notice after executing the UGMDSYNC program is the following message:
Synchronize/Display Variances Between Systems
     The compound dependencies for the attributes or texts are not defined
     uniformly in the systems investigated.
     Example:
     Texts are defined as language-specific in the local systems and as
     language-independent in remote systems (for example BW systems). The
     same can apply for other compounds such as version or time dependencies.
System Response
     The display of differences between the systems will be affected. A
     manual synchronization will not be completely successful.
Procedure
     1. Ensure that the dependencies for the attributes and texts are the
         same in all systems.
     2. Start the synchronization process again.
Procedure for System Administration
I can check the attributes and texts in BW via RSD1 by specifying InfoObject = 0COMPANY and checking the Master data/texts and Attribute tabs. But how do I check similar settings in BCS Workbench? I can't determine whether the Company text is language-dependent or not simply by displaying specific Company from Process View > Master Data > Consolidation Units > Company.
Thanks.

How to get the values for checked and unchecked chekboxes

Hai i have using the checkbox in for loop.
I need the urgent help from anyone,
for example in the loop there is having 5 checkbox if i checked 3 of the ckeckboxes and 2 of the checkboxes are unchecked. I need to get the values for checked checkboxes and unchecked checkboxes. Because if i checked the checkboxes, those values need to be inserted into the database. Those for unchecked checkboxes values need to be deleted from the database. Can anyone help me for this
i am using the following jsp code for this. If anyone can know about this please post me the sample code.
<form name="confirmcontainer" id="confirmcontainer" method="post" action="submit.jsp">
<% for(int i=0;i<value.length;i++) {%>
<tr>
<td><input name="assigncontainer_chkbox" d="assigncontainer _chkbox" type="checkbox" value="<%=value[0]%>"></td>
<td class="bottomborder"><div align="center"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=value[1]%> </font></div></td>
<td bgcolor="#FFFFFF" class="bottomborder"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=value[2]%></font></td>
</tr>
<% } %>
<tr><td><input type="submit" name="submit" value="submit"> </td></tr>
</form>
Thanks & Regards,
Tamilvanan

Hey thanks Alex and Catastrophe for the quick response...
I'll be sitting with the functional team and reviewing the roles created.
Thanks for all the help once more
Regards,
Akash.

How to delete values from extension collection field through importer?

Hi Experts,
We have created one extension collection field in Master Agreement.
We are able to add values to that collection field using Extension collection template CSV file through importer.
Now we have a requirement to delete values from the Extension collection field through importer using CSV file.
If anyone have template or idea please share with us.
Thanks in advance!!
Regards,
Lava.

Hi Agrawal,
Thanks for you helpful information.
Regards,
Lava.

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

Contract net value for Header Statistics is not correct

There is issue with value contract. The net value for Header Statistics is not showing correctly for some contracts. Especially, when we delete the PO line items or reverse all entries (GR and IR) for PO line item.
Contract has one line with account category ‘U’. The target value is 300,000.00 and total quantity released to date is 160,000. The net value for Header Statistics should be 140,000 but it is showing 600,000 which is over (double) the target value and user cannot release any further PO reference to this contract.
Earlier I defined net price for line item 300,000 and I changed net price to zero and execute report RM06ENP0 but it doesn’t work.
Please share your experience and thoughts.
Thanks,
Shah.

Hi Jurgen,
There are few Purchace orders with multiple line items and each line item for Purchase orders referencing the same line and same contract.
There is only one Purchase order has two deleted lines against this contract.
Theses deleted line's net price has changed to zero and there is no PO history.
Contract released order value is correct as there is only one line, but net price is wrong. and user is getting error for target value is excedeed by $nnn when trying to create purchase order.
Thanks,
Shah.

How to pass multiple MDX values for a single parameter into a drill-through report?

I'm thinking this will be an easy question for any experienced SSRS/MDX developers, at least I hope so! I've created a report that gives the user the option to choose viewing data for the current/active week, or YTD. Depending on which link the
user selects, the report simply calls itself and needs to pass in the parameter value for Active week. If it's active week, the parameter value will simply be "true". If it's YTD, the parameter value needs to be both "True" and "False" so the current
week's data is accounted for as well. I've set everything up except for the final step, and I have no idea what to type into the Value field below. I've tried different things: false, as you see below (it errors saying I'm missing the parameter
value), the value in MDX format: =[School Dates].[Active Week].&[True] (it said I was missing a bracket), a 1 instead of the word true (again, missing a parameter value). Nothing is working.
So my question is kindof two-fold: 1) how do you pass in the value at all and 2) more specifically, how do you pass in multiple values (both true & false) ??

I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
To answer your initial questions, you are correct with both your assumptions:
1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
So in following your instructions, well that's the problem I'm not quite following :)
1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden? If so, I've done this.
2) I'm not quite sure where to use the statement you provided me. You said to put it in the dataset, but I don't know which dataset. I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
as a parameter). If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties. I tried this, and it did not generate any errors, but it also kept my report groups from displaying
-- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there. When I did this and ran the report, I would get the following error:
The 'SchoolDaysActiveWeek' parameter is missing a value
So what am I missing!?
Also, thanks for taking the time to respond!!

Disable Delete Button for infotype 2001 subtype 0025

I want to Disable Delete Button for infotype 2001 subtype 0025 only in PA30/61.
Is there any EXIT available

Hi
Try it .
Somebody already given this type of answers.
Pls first use Search then post.
Well FYI,
<b>There is a standard User Exit for PA30 / 40 for PBO and PAI events.
ZXPADU01 for PBO and
ZXPADU02 for PAI events.
By writing proper code in here for the IT2001, you can write your rules.
PBAS0001 ( PA: Pers.Admin./Recruitment: Default values and checks ),</b>
Manoj Shakya.

"You must specify a value for this required field" in SharePoint list

HI All,
I have a couple of taxonomy fields in my content type. When I try to add a new item with my content type and save, I'm getting an error message "You must specify a value for this required field" against each taxonomy field. I'm not sure what am
I missing. I deleted the content type and added that again to my list but still no luck. Can someone please help me out? Thanks.
Regards,
SC Vinod

hi
it depends how you updated existing field. We faced with the problem that update of taxonomy site column was not propagated to the lists. In Sharepoint when content type is bound to the list, new hidden content type is created for that list - you may check
it if will enumerate
SPList.ContentTypes property. And when you try to update site column changes may not be propagated to these list content types. In order to update it you need to get reference on a field from list content type and update if explicitly.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Delete values for 0CALMONTH in QDesigner

Similar Messages

Maybe you are looking for